andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Merge pull request #6647 from thinkyhead/bf_pwm_cleanup 

Rename software PWM variables for clarity
pull/1/head
Scott Lahteine 8 years ago
committed by GitHub
parent
83b6bc8e05 911a87e006
commit
5402eaf9bd
10 changed files with 153 additions and 173 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/Conditionals_post.h
  2. 33
      Marlin/Marlin_main.cpp
  3. 1
      Marlin/example_configurations/SCARA/Configuration.h
  4. 6
      Marlin/planner.cpp
  5. 0
      Marlin/platformio.ini
  6. 165
      Marlin/temperature.cpp
  7. 17
      Marlin/temperature.h
  8. 58
      README.md

2
Marlin/Conditionals_post.h
View File

@ -649,7 +649,7 @@
/**
* Heater & Fan Pausing
*/
#if ENABLED(PROBING_FANS_OFF) && FAN_COUNT == 0
#if FAN_COUNT == 0
#undef PROBING_FANS_OFF
#endif
#define QUIET_PROBING (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF))

33
Marlin/Marlin_main.cpp
View File

@ -2057,13 +2057,10 @@ static void clean_up_after_endstop_or_probe_move() {
#endif
#if ENABLED(PROBING_FANS_OFF)
void fans_pause(bool p) {
if (p == fans_paused) { // If called out of order something is wrong
SERIAL_ERROR_START;
serialprintPGM(fans_paused ? PSTR("Fans already paused!") : PSTR("Fans already unpaused!"));
return;
}
void fans_pause(const bool p) {
if (p != fans_paused) {
fans_paused = p;
if (p)
for (uint8_t x = 0; x < FAN_COUNT; x++) {
paused_fanSpeeds[x] = fanSpeeds[x];
@ -2072,9 +2069,9 @@ static void clean_up_after_endstop_or_probe_move() {
else
for (uint8_t x = 0; x < FAN_COUNT; x++)
fanSpeeds[x] = paused_fanSpeeds[x];
fans_paused = p;
}
}
#endif // PROBING_FANS_OFF
#if HAS_BED_PROBE
@ -2089,18 +2086,16 @@ static void clean_up_after_endstop_or_probe_move() {
#endif
#if QUIET_PROBING
void probing_pause(bool pause) {
void probing_pause(const bool p) {
#if ENABLED(PROBING_HEATERS_OFF)
thermalManager.pause(pause);
thermalManager.pause(p);
#endif
#if ENABLED(PROBING_FANS_OFF)
fans_pause(pause);
fans_pause(p);
#endif
if(pause) safe_delay(25);
if (p) safe_delay(25);
}
#endif
#endif // QUIET_PROBING
#if ENABLED(BLTOUCH)
@ -11141,7 +11136,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// SERIAL_ECHOPAIR(" seconds=", seconds);
// SERIAL_ECHOLNPAIR(" segments=", segments);
#if IS_SCARA
#if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// SCARA needs to scale the feed rate from mm/s to degrees/s
const float inv_segment_length = min(10.0, float(segments) / cartesian_mm), // 1/mm/segs
feed_factor = inv_segment_length * _feedrate_mm_s;
@ -11168,7 +11163,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
ADJUST_DELTA(logical); // Adjust Z if bed leveling is enabled
#if IS_SCARA
#if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// For SCARA scale the feed rate from mm/s to degrees/s
// Use ratio between the length of the move and the larger angle change
const float adiff = abs(delta[A_AXIS] - oldA),
@ -11184,7 +11179,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) {
// Since segment_distance is only approximate,
// the final move must be to the exact destination.
#if IS_SCARA
#if IS_SCARA && ENABLED(SCARA_FEEDRATE_SCALING)
// For SCARA scale the feed rate from mm/s to degrees/s
// With segments > 1 length is 1 segment, otherwise total length
inverse_kinematics(ltarget);
@ -11516,7 +11511,7 @@ void prepare_move_to_destination() {
const millis_t ms = millis();
if (ELAPSED(ms, nextMotorCheck)) {
nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s
if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON || thermalManager.soft_pwm_bed > 0
if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON || thermalManager.soft_pwm_amount_bed > 0
|| E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled...
#if E_STEPPERS > 1
|| E1_ENABLE_READ == E_ENABLE_ON

1
Marlin/example_configurations/SCARA/Configuration.h
View File

@ -76,6 +76,7 @@
#if ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA)
//#define DEBUG_SCARA_KINEMATICS
//#define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly
// If movement is choppy try lowering this value
#define SCARA_SEGMENTS_PER_SECOND 200

6
Marlin/planner.cpp
View File

@ -491,13 +491,13 @@ void Planner::check_axes_activity() {
#if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0
thermalManager.fanSpeedSoftPwm[0] = CALC_FAN_SPEED(0);
thermalManager.soft_pwm_amount_fan[0] = CALC_FAN_SPEED(0);
#endif
#if HAS_FAN1
thermalManager.fanSpeedSoftPwm[1] = CALC_FAN_SPEED(1);
thermalManager.soft_pwm_amount_fan[1] = CALC_FAN_SPEED(1);
#endif
#if HAS_FAN2
thermalManager.fanSpeedSoftPwm[2] = CALC_FAN_SPEED(2);
thermalManager.soft_pwm_amount_fan[2] = CALC_FAN_SPEED(2);
#endif
#else
#if HAS_FAN0

0
platformio.ini → Marlin/platformio.ini
View File

165
Marlin/temperature.cpp
View File

@ -74,12 +74,6 @@ int16_t Temperature::current_temperature_raw[HOTENDS] = { 0 },
float Temperature::redundant_temperature = 0.0;
#endif
uint8_t Temperature::soft_pwm_bed;
#if ENABLED(FAN_SOFT_PWM)
uint8_t Temperature::fanSpeedSoftPwm[FAN_COUNT];
#endif
#if ENABLED(PIDTEMP)
#if ENABLED(PID_PARAMS_PER_HOTEND) && HOTENDS > 1
float Temperature::Kp[HOTENDS] = ARRAY_BY_HOTENDS1(DEFAULT_Kp),
@ -194,10 +188,12 @@ int16_t Temperature::minttemp_raw[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_RAW_LO_TE
millis_t Temperature::next_auto_fan_check_ms = 0;
#endif
uint8_t Temperature::soft_pwm[HOTENDS];
uint8_t Temperature::soft_pwm_amount[HOTENDS],
Temperature::soft_pwm_amount_bed;
#if ENABLED(FAN_SOFT_PWM)
uint8_t Temperature::soft_pwm_fan[FAN_COUNT];
uint8_t Temperature::soft_pwm_amount_fan[FAN_COUNT],
Temperature::soft_pwm_count_fan[FAN_COUNT];
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
@ -206,7 +202,7 @@ uint8_t Temperature::soft_pwm[HOTENDS];
#if ENABLED(PROBING_HEATERS_OFF)
bool Temperature::paused;
int16_t Temperature::paused_hotend_temps[HOTENDS];
int16_t Temperature::paused_hotend_temp[HOTENDS];
#if HAS_TEMP_BED
int16_t Temperature::paused_bed_temp;
#endif
@ -254,13 +250,13 @@ uint8_t Temperature::soft_pwm[HOTENDS];
#if HAS_PID_FOR_BOTH
if (hotend < 0)
soft_pwm_bed = bias = d = (MAX_BED_POWER) >> 1;
soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1;
else
soft_pwm[hotend] = bias = d = (PID_MAX) >> 1;
soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1;
#elif ENABLED(PIDTEMP)
soft_pwm[hotend] = bias = d = (PID_MAX) >> 1;
soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1;
#else
soft_pwm_bed = bias = d = (MAX_BED_POWER) >> 1;
soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1;
#endif
wait_for_heatup = true;
@ -298,13 +294,13 @@ uint8_t Temperature::soft_pwm[HOTENDS];
heating = false;
#if HAS_PID_FOR_BOTH
if (hotend < 0)
soft_pwm_bed = (bias - d) >> 1;
soft_pwm_amount_bed = (bias - d) >> 1;
else
soft_pwm[hotend] = (bias - d) >> 1;
soft_pwm_amount[hotend] = (bias - d) >> 1;
#elif ENABLED(PIDTEMP)
soft_pwm[hotend] = (bias - d) >> 1;
soft_pwm_amount[hotend] = (bias - d) >> 1;
#elif ENABLED(PIDTEMPBED)
soft_pwm_bed = (bias - d) >> 1;
soft_pwm_amount_bed = (bias - d) >> 1;
#endif
t1 = ms;
t_high = t1 - t2;
@ -367,13 +363,13 @@ uint8_t Temperature::soft_pwm[HOTENDS];
}
#if HAS_PID_FOR_BOTH
if (hotend < 0)
soft_pwm_bed = (bias + d) >> 1;
soft_pwm_amount_bed = (bias + d) >> 1;
else
soft_pwm[hotend] = (bias + d) >> 1;
soft_pwm_amount[hotend] = (bias + d) >> 1;
#elif ENABLED(PIDTEMP)
soft_pwm[hotend] = (bias + d) >> 1;
soft_pwm_amount[hotend] = (bias + d) >> 1;
#else
soft_pwm_bed = (bias + d) >> 1;
soft_pwm_amount_bed = (bias + d) >> 1;
#endif
cycles++;
min = temp;
@ -466,7 +462,7 @@ void Temperature::updatePID() {
}
int Temperature::getHeaterPower(int heater) {
return heater < 0 ? soft_pwm_bed : soft_pwm[heater];
return heater < 0 ? soft_pwm_amount_bed : soft_pwm_amount[heater];
}
#if HAS_AUTO_FAN
@ -717,7 +713,7 @@ void Temperature::manage_heater() {
float pid_output = get_pid_output(e);
// Check if temperature is within the correct range
soft_pwm[e] = (current_temperature[e] > minttemp[e] || is_preheating(e)) && current_temperature[e] < maxttemp[e] ? (int)pid_output >> 1 : 0;
soft_pwm_amount[e] = (current_temperature[e] > minttemp[e] || is_preheating(e)) && current_temperature[e] < maxttemp[e] ? (int)pid_output >> 1 : 0;
// Check if the temperature is failing to increase
#if WATCH_HOTENDS
@ -798,27 +794,27 @@ void Temperature::manage_heater() {
#if ENABLED(PIDTEMPBED)
float pid_output = get_pid_output_bed();
soft_pwm_bed = WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP) ? (int)pid_output >> 1 : 0;
soft_pwm_amount_bed = WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP) ? (int)pid_output >> 1 : 0;
#elif ENABLED(BED_LIMIT_SWITCHING)
// Check if temperature is within the correct band
if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) {
if (current_temperature_bed >= target_temperature_bed + BED_HYSTERESIS)
soft_pwm_bed = 0;
soft_pwm_amount_bed = 0;
else if (current_temperature_bed <= target_temperature_bed - (BED_HYSTERESIS))
soft_pwm_bed = MAX_BED_POWER >> 1;
soft_pwm_amount_bed = MAX_BED_POWER >> 1;
}
else {
soft_pwm_bed = 0;
soft_pwm_amount_bed = 0;
WRITE_HEATER_BED(LOW);
}
#else // !PIDTEMPBED && !BED_LIMIT_SWITCHING
// Check if temperature is within the correct range
if (WITHIN(current_temperature_bed, BED_MINTEMP, BED_MAXTEMP)) {
soft_pwm_bed = current_temperature_bed < target_temperature_bed ? MAX_BED_POWER >> 1 : 0;
soft_pwm_amount_bed = current_temperature_bed < target_temperature_bed ? MAX_BED_POWER >> 1 : 0;
}
else {
soft_pwm_bed = 0;
soft_pwm_amount_bed = 0;
WRITE_HEATER_BED(LOW);
}
#endif
@ -1205,7 +1201,7 @@ void Temperature::init() {
#if ENABLED(PROBING_HEATERS_OFF)
paused = false;
ZERO(paused_hotend_temps);
ZERO(paused_hotend_temp);
#if HAS_TEMP_BED
paused_bed_temp = 0;
#endif
@ -1316,7 +1312,7 @@ void Temperature::disable_all_heaters() {
// Unpause and reset everything
#if ENABLED(PROBING_HEATERS_OFF)
paused = false;
ZERO(paused_hotend_temps);
ZERO(paused_hotend_temp);
#if HAS_TEMP_BED
paused_bed_temp = 0;
#endif
@ -1327,7 +1323,7 @@ void Temperature::disable_all_heaters() {
#define DISABLE_HEATER(NR) { \
setTargetHotend(0, NR); \
soft_pwm[NR] = 0; \
soft_pwm_amount[NR] = 0; \
WRITE_HEATER_ ##NR (LOW); \
}
@ -1349,7 +1345,7 @@ void Temperature::disable_all_heaters() {
#if HAS_TEMP_BED
target_temperature_bed = 0;
soft_pwm_bed = 0;
soft_pwm_amount_bed = 0;
#if HAS_HEATER_BED
WRITE_HEATER_BED(LOW);
#endif
@ -1357,16 +1353,13 @@ void Temperature::disable_all_heaters() {
}
#if ENABLED(PROBING_HEATERS_OFF)
void Temperature::pause(bool p) {
if (p == paused) { // If called out of order something is wrong
SERIAL_ERROR_START;
serialprintPGM(paused ? PSTR("Heaters already paused!") : PSTR("Heaters already unpaused!"));
return;
}
void Temperature::pause(const bool p) {
if (p != paused) {
paused = p;
if (p) {
HOTEND_LOOP() {
paused_hotend_temps[e] = degTargetHotend(e);
paused_hotend_temp[e] = degTargetHotend(e);
setTargetHotend(0, e);
}
#if HAS_TEMP_BED
@ -1375,18 +1368,14 @@ void Temperature::disable_all_heaters() {
#endif
}
else {
HOTEND_LOOP() setTargetHotend(paused_hotend_temps[e], e);
HOTEND_LOOP() setTargetHotend(paused_hotend_temp[e], e);
#if HAS_TEMP_BED
setTargetBed(paused_bed_temp);
#endif
}
paused = p;
}
bool Temperature::ispaused() {
return paused;
}
#endif // PROBING_HEATERS_OFF
#if ENABLED(HEATER_0_USES_MAX6675)
@ -1613,11 +1602,11 @@ void Temperature::isr() {
#if ENABLED(SLOW_PWM_HEATERS)
static uint8_t slow_pwm_count = 0;
#define ISR_STATICS(n) \
static uint8_t soft_pwm_ ## n; \
static uint8_t state_heater_ ## n = 0; \
static uint8_t state_timer_heater_ ## n = 0
static uint8_t soft_pwm_count_ ## n, \
state_heater_ ## n = 0, \
state_timer_heater_ ## n = 0
#else
#define ISR_STATICS(n) static uint8_t soft_pwm_ ## n = 0
#define ISR_STATICS(n) static uint8_t soft_pwm_count_ ## n = 0
#endif
// Statics per heater
@ -1656,73 +1645,73 @@ void Temperature::isr() {
*/
if (pwm_count_tmp >= 127) {
pwm_count_tmp -= 127;
soft_pwm_0 = (soft_pwm_0 & pwm_mask) + soft_pwm[0];
WRITE_HEATER_0(soft_pwm_0 > pwm_mask ? HIGH : LOW);
soft_pwm_count_0 = (soft_pwm_count_0 & pwm_mask) + soft_pwm_amount[0];
WRITE_HEATER_0(soft_pwm_count_0 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 1
soft_pwm_1 = (soft_pwm_1 & pwm_mask) + soft_pwm[1];
WRITE_HEATER_1(soft_pwm_1 > pwm_mask ? HIGH : LOW);
soft_pwm_count_1 = (soft_pwm_count_1 & pwm_mask) + soft_pwm_amount[1];
WRITE_HEATER_1(soft_pwm_count_1 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 2
soft_pwm_2 = (soft_pwm_2 & pwm_mask) + soft_pwm[2];
WRITE_HEATER_2(soft_pwm_2 > pwm_mask ? HIGH : LOW);
soft_pwm_count_2 = (soft_pwm_count_2 & pwm_mask) + soft_pwm_amount[2];
WRITE_HEATER_2(soft_pwm_count_2 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 3
soft_pwm_3 = (soft_pwm_3 & pwm_mask) + soft_pwm[3];
WRITE_HEATER_3(soft_pwm_3 > pwm_mask ? HIGH : LOW);
soft_pwm_count_3 = (soft_pwm_count_3 & pwm_mask) + soft_pwm_amount[3];
WRITE_HEATER_3(soft_pwm_count_3 > pwm_mask ? HIGH : LOW);
#if HOTENDS > 4
soft_pwm_4 = (soft_pwm_4 & pwm_mask) + soft_pwm[4];
WRITE_HEATER_4(soft_pwm_4 > pwm_mask ? HIGH : LOW);
soft_pwm_count_4 = (soft_pwm_count_4 & pwm_mask) + soft_pwm_amount[4];
WRITE_HEATER_4(soft_pwm_count_4 > pwm_mask ? HIGH : LOW);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
soft_pwm_BED = (soft_pwm_BED & pwm_mask) + soft_pwm_bed;
WRITE_HEATER_BED(soft_pwm_BED > pwm_mask ? HIGH : LOW);
soft_pwm_count_BED = (soft_pwm_count_BED & pwm_mask) + soft_pwm_amount_bed;
WRITE_HEATER_BED(soft_pwm_count_BED > pwm_mask ? HIGH : LOW);
#endif
#if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0
soft_pwm_fan[0] = (soft_pwm_fan[0] & pwm_mask) + fanSpeedSoftPwm[0] >> 1;
WRITE_FAN(soft_pwm_fan[0] > pwm_mask ? HIGH : LOW);
soft_pwm_count_fan[0] = (soft_pwm_count_fan[0] & pwm_mask) + soft_pwm_amount_fan[0] >> 1;
WRITE_FAN(soft_pwm_count_fan[0] > pwm_mask ? HIGH : LOW);
#endif
#if HAS_FAN1
soft_pwm_fan[1] = (soft_pwm_fan[1] & pwm_mask) + fanSpeedSoftPwm[1] >> 1;
WRITE_FAN1(soft_pwm_fan[1] > pwm_mask ? HIGH : LOW);
soft_pwm_count_fan[1] = (soft_pwm_count_fan[1] & pwm_mask) + soft_pwm_amount_fan[1] >> 1;
WRITE_FAN1(soft_pwm_count_fan[1] > pwm_mask ? HIGH : LOW);
#endif
#if HAS_FAN2
soft_pwm_fan[2] = (soft_pwm_fan[2] & pwm_mask) + fanSpeedSoftPwm[2] >> 1;
WRITE_FAN2(soft_pwm_fan[2] > pwm_mask ? HIGH : LOW);
soft_pwm_count_fan[2] = (soft_pwm_count_fan[2] & pwm_mask) + soft_pwm_amount_fan[2] >> 1;
WRITE_FAN2(soft_pwm_count_fan[2] > pwm_mask ? HIGH : LOW);
#endif
#endif
}
else {
if (soft_pwm_0 <= pwm_count_tmp) WRITE_HEATER_0(0);
if (soft_pwm_count_0 <= pwm_count_tmp) WRITE_HEATER_0(0);
#if HOTENDS > 1
if (soft_pwm_1 <= pwm_count_tmp) WRITE_HEATER_1(0);
if (soft_pwm_count_1 <= pwm_count_tmp) WRITE_HEATER_1(0);
#if HOTENDS > 2
if (soft_pwm_2 <= pwm_count_tmp) WRITE_HEATER_2(0);
if (soft_pwm_count_2 <= pwm_count_tmp) WRITE_HEATER_2(0);
#if HOTENDS > 3
if (soft_pwm_3 <= pwm_count_tmp) WRITE_HEATER_3(0);
if (soft_pwm_count_3 <= pwm_count_tmp) WRITE_HEATER_3(0);
#if HOTENDS > 4
if (soft_pwm_4 <= pwm_count_tmp) WRITE_HEATER_4(0);
if (soft_pwm_count_4 <= pwm_count_tmp) WRITE_HEATER_4(0);
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
if (soft_pwm_BED <= pwm_count_tmp) WRITE_HEATER_BED(0);
if (soft_pwm_count_BED <= pwm_count_tmp) WRITE_HEATER_BED(0);
#endif
#if ENABLED(FAN_SOFT_PWM)
#if HAS_FAN0
if (soft_pwm_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
#endif
#if HAS_FAN1
if (soft_pwm_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
#endif
#if HAS_FAN2
if (soft_pwm_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
#endif
#endif
}
@ -1765,7 +1754,7 @@ void Temperature::isr() {
WRITE_HEATER_ ##NR(0); \
} \
}
#define SLOW_PWM_ROUTINE(n) _SLOW_PWM_ROUTINE(n, soft_pwm[n])
#define SLOW_PWM_ROUTINE(n) _SLOW_PWM_ROUTINE(n, soft_pwm_amount[n])
#define PWM_OFF_ROUTINE(NR) \
if (soft_pwm_ ##NR < slow_pwm_count) { \
@ -1792,7 +1781,7 @@ void Temperature::isr() {
#endif // HOTENDS > 2
#endif // HOTENDS > 1
#if HAS_HEATER_BED
_SLOW_PWM_ROUTINE(BED, soft_pwm_bed); // BED
_SLOW_PWM_ROUTINE(BED, soft_pwm_amount_bed); // BED
#endif
} // slow_pwm_count == 0
@ -1818,26 +1807,26 @@ void Temperature::isr() {
if (pwm_count_tmp >= 127) {
pwm_count_tmp = 0;
#if HAS_FAN0
soft_pwm_fan[0] = fanSpeedSoftPwm[0] >> 1;
WRITE_FAN(soft_pwm_fan[0] > 0 ? HIGH : LOW);
soft_pwm_count_fan[0] = soft_pwm_amount_fan[0] >> 1;
WRITE_FAN(soft_pwm_count_fan[0] > 0 ? HIGH : LOW);
#endif
#if HAS_FAN1
soft_pwm_fan[1] = fanSpeedSoftPwm[1] >> 1;
WRITE_FAN1(soft_pwm_fan[1] > 0 ? HIGH : LOW);
soft_pwm_count_fan[1] = soft_pwm_amount_fan[1] >> 1;
WRITE_FAN1(soft_pwm_count_fan[1] > 0 ? HIGH : LOW);
#endif
#if HAS_FAN2
soft_pwm_fan[2] = fanSpeedSoftPwm[2] >> 1;
WRITE_FAN2(soft_pwm_fan[2] > 0 ? HIGH : LOW);
soft_pwm_count_fan[2] = soft_pwm_amount_fan[2] >> 1;
WRITE_FAN2(soft_pwm_count_fan[2] > 0 ? HIGH : LOW);
#endif
}
#if HAS_FAN0
if (soft_pwm_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
if (soft_pwm_count_fan[0] <= pwm_count_tmp) WRITE_FAN(0);
#endif
#if HAS_FAN1
if (soft_pwm_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
if (soft_pwm_count_fan[1] <= pwm_count_tmp) WRITE_FAN1(0);
#endif
#if HAS_FAN2
if (soft_pwm_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
if (soft_pwm_count_fan[2] <= pwm_count_tmp) WRITE_FAN2(0);
#endif
#endif // FAN_SOFT_PWM

17
Marlin/temperature.h
View File

@ -109,10 +109,12 @@ class Temperature {
static float redundant_temperature;
#endif
static uint8_t soft_pwm_bed;
static uint8_t soft_pwm_amount[HOTENDS],
soft_pwm_amount_bed;
#if ENABLED(FAN_SOFT_PWM)
static uint8_t fanSpeedSoftPwm[FAN_COUNT];
static uint8_t soft_pwm_amount_fan[FAN_COUNT],
soft_pwm_count_fan[FAN_COUNT];
#endif
#if ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED)
@ -249,19 +251,13 @@ class Temperature {
static millis_t next_auto_fan_check_ms;
#endif
static uint8_t soft_pwm[HOTENDS];
#if ENABLED(FAN_SOFT_PWM)
static uint8_t soft_pwm_fan[FAN_COUNT];
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
static int current_raw_filwidth; //Holds measured filament diameter - one extruder only
#endif
#if ENABLED(PROBING_HEATERS_OFF)
static bool paused;
static int16_t paused_hotend_temps[HOTENDS];
static int16_t paused_hotend_temp[HOTENDS];
#if HAS_TEMP_BED
static int16_t paused_bed_temp;
@ -462,8 +458,7 @@ class Temperature {
#endif // BABYSTEPPING
#if ENABLED(PROBING_HEATERS_OFF)
static void pause(bool p);
static bool ispaused();
static void pause(const bool p);
#endif
private:

58
README.md
View File

@ -113,37 +113,37 @@ Proposed patches should be submitted as a Pull Request against this branch ([bug
## Credits
The current Marlin dev team consists of:
- Roxanne Neufeld [@Roxy-3D] - English
- Scott Lahteine [@thinkyhead] - English
- Bob Kuhn [@Bob-the-Kuhn] - English
- Andreas Hardtung [@AnHardt] - Deutsch, English
- Nico Tonnhofer [@Wurstnase] - Deutsch, English
- Jochen Groppe [@CONSULitAS] - Deutsch, English
- João Brazio [@jbrazio] - Portuguese, English
- Bo Hermannsen [@boelle] - Danish, English
- Bob Cousins [@bobc] - English
- [@maverikou]
- Chris Palmer [@nophead]
- [@paclema]
- Erik van der Zalm [@ErikZalm]
- David Braam [@daid]
- Bernhard Kubicek [@bkubicek]
- Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - English
- Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - English
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - English
- Andreas Hardtung [[@AnHardt](https://github.com/AnHardt)] - Deutsch, English
- Nico Tonnhofer [[@Wurstnase](https://github.com/Wurstnase)] - Deutsch, English
- Jochen Groppe [[@CONSULitAS](https://github.com/CONSULitAS)] - Deutsch, English
- João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portuguese, English
- Bo Hermannsen [[@boelle](https://github.com/boelle)] - Danish, English
- Bob Cousins [[@bobc](https://github.com/bobc)] - English
- [[@maverikou](https://github.com/maverikou)]
- Chris Palmer [[@nophead](https://github.com/nophead)]
- [[@paclema](https://github.com/paclema)]
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)]
- David Braam [[@daid](https://github.com/daid)]
- Bernhard Kubicek [[@bkubicek](https://github.com/bkubicek)]
More features have been added by:
- Alberto Cotronei [@MagoKimbra] - English, Italian
- Thomas Moore [@tcm0116]
- Ernesto Martinez [@emartinez167]
- Petr Zahradnik [@clexpert]
- Kai [@Kaibob2]
- Edward Patel [@epatel]
- F. Malpartida [@fmalpartida] - English, Spanish
- [@esenapaj] - English, Japanese
- [@benlye]
- [@Tannoo]
- [@teemuatlut]
- [@bgort]
- [@LVD-AC]
- [@paulusjacobus]
- Alberto Cotronei [[@MagoKimbra](https://github.com/MagoKimbra)] - English, Italian
- Thomas Moore [[@tcm0116](https://github.com/tcm0116)]
- Ernesto Martinez [[@emartinez167](https://github.com/emartinez167)]
- Petr Zahradnik [[@clexpert](https://github.com/clexpert)]
- Kai [[@Kaibob2](https://github.com/Kaibob2)]
- Edward Patel [[@epatel](https://github.com/epatel)]
- F. Malpartida [[@fmalpartida](https://github.com/fmalpartida)] - English, Spanish
- [[@esenapaj](https://github.com/esenapaj)] - English, Japanese
- [[@benlye](https://github.com/benlye)]
- [[@Tannoo](https://github.com/Tannoo)]
- [[@teemuatlut](https://github.com/teemuatlut)]
- [[@bgort](https://github.com/bgort)]
- [[@LVD-AC](https://github.com/LVD-AC)]
- [[@paulusjacobus](https://github.com/paulusjacobus)]
- ...and many others
## License

Write Preview
Loading…
Cancel
Save