Browse Source

Add ADC helpers to temp_info_t

pull/1/head
Scott Lahteine 5 years ago
parent
commit
4cdf7a1b93
  1. 26
      Marlin/src/module/temperature.cpp
  2. 3
      Marlin/src/module/temperature.h

26
Marlin/src/module/temperature.cpp

@ -2164,23 +2164,23 @@ void Temperature::disable_all_heaters() {
void Temperature::set_current_temp_raw() { void Temperature::set_current_temp_raw() {
#if HAS_TEMP_ADC_0 && DISABLED(HEATER_0_USES_MAX6675) #if HAS_TEMP_ADC_0 && DISABLED(HEATER_0_USES_MAX6675)
temp_hotend[0].raw = temp_hotend[0].acc; temp_hotend[0].update();
#endif #endif
#if HAS_TEMP_ADC_1 #if HAS_TEMP_ADC_1
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
redundant_temperature_raw = temp_hotend[1].acc; redundant_temperature_raw = temp_hotend[1].acc;
#elif DISABLED(HEATER_1_USES_MAX6675) #elif DISABLED(HEATER_1_USES_MAX6675)
temp_hotend[1].raw = temp_hotend[1].acc; temp_hotend[1].update();
#endif #endif
#if HAS_TEMP_ADC_2 #if HAS_TEMP_ADC_2
temp_hotend[2].raw = temp_hotend[2].acc; temp_hotend[2].update();
#if HAS_TEMP_ADC_3 #if HAS_TEMP_ADC_3
temp_hotend[3].raw = temp_hotend[3].acc; temp_hotend[3].update();
#if HAS_TEMP_ADC_4 #if HAS_TEMP_ADC_4
temp_hotend[4].raw = temp_hotend[4].acc; temp_hotend[4].update();
#if HAS_TEMP_ADC_5 #if HAS_TEMP_ADC_5
temp_hotend[5].raw = temp_hotend[5].acc; temp_hotend[5].update();
#endif // HAS_TEMP_ADC_5 #endif // HAS_TEMP_ADC_5
#endif // HAS_TEMP_ADC_4 #endif // HAS_TEMP_ADC_4
#endif // HAS_TEMP_ADC_3 #endif // HAS_TEMP_ADC_3
@ -2188,11 +2188,11 @@ void Temperature::set_current_temp_raw() {
#endif // HAS_TEMP_ADC_1 #endif // HAS_TEMP_ADC_1
#if HAS_HEATED_BED #if HAS_HEATED_BED
temp_bed.raw = temp_bed.acc; temp_bed.update();
#endif #endif
#if HAS_TEMP_CHAMBER #if HAS_TEMP_CHAMBER
temp_chamber.raw = temp_chamber.acc; temp_chamber.update();
#endif #endif
temp_meas_ready = true; temp_meas_ready = true;
@ -2212,17 +2212,17 @@ void Temperature::readings_ready() {
current_raw_filwidth = raw_filwidth_value >> 10; // Divide to get to 0-16384 range since we used 1/128 IIR filter approach current_raw_filwidth = raw_filwidth_value >> 10; // Divide to get to 0-16384 range since we used 1/128 IIR filter approach
#endif #endif
HOTEND_LOOP() temp_hotend[e].acc = 0; HOTEND_LOOP() temp_hotend[e].reset();
#if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
temp_hotend[1].acc = 0; temp_hotend[1].reset();
#endif #endif
#if HAS_HEATED_BED #if HAS_HEATED_BED
temp_bed.acc = 0; temp_bed.reset();
#endif #endif
#if HAS_TEMP_CHAMBER #if HAS_TEMP_CHAMBER
temp_chamber.acc = 0; temp_chamber.reset();
#endif #endif
static constexpr int8_t temp_dir[] = { static constexpr int8_t temp_dir[] = {
@ -2638,7 +2638,7 @@ void Temperature::isr() {
*/ */
#define ACCUMULATE_ADC(obj) do{ \ #define ACCUMULATE_ADC(obj) do{ \
if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \ if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \
else obj.acc += HAL_READ_ADC(); \ else obj.sample(HAL_READ_ADC()); \
}while(0) }while(0)
ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling; ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling;

3
Marlin/src/module/temperature.h

@ -160,6 +160,9 @@ typedef struct TempInfo {
uint16_t acc; uint16_t acc;
int16_t raw; int16_t raw;
float current; float current;
inline void reset() { acc = 0; }
inline void sample(const uint16_t s) { acc += s; }
inline void update() { raw = acc; }
} temp_info_t; } temp_info_t;
// A PWM heater with temperature sensor // A PWM heater with temperature sensor

Loading…
Cancel
Save