Update Config
This commit is contained in:
X-Dron
@@ -121,13 +121,14 @@
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 115200
|
||||
#define USB_BAUDRATE 230400
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO
|
||||
#define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2
|
||||
#endif
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
@@ -426,7 +427,7 @@
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_CHAMBER 1
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
@@ -661,7 +662,7 @@
|
||||
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
|
||||
/**
|
||||
* Stepper Drivers
|
||||
@@ -679,15 +680,15 @@
|
||||
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
|
||||
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
|
||||
*/
|
||||
#define X_DRIVER_TYPE A4988
|
||||
#define Y_DRIVER_TYPE A4988
|
||||
#define Z_DRIVER_TYPE A4988
|
||||
#define X_DRIVER_TYPE TMC2209
|
||||
#define Y_DRIVER_TYPE TMC2208_STANDALONE
|
||||
#define Z_DRIVER_TYPE TMC2208_STANDALONE
|
||||
//#define X2_DRIVER_TYPE A4988
|
||||
//#define Y2_DRIVER_TYPE A4988
|
||||
//#define Z2_DRIVER_TYPE A4988
|
||||
//#define Z3_DRIVER_TYPE A4988
|
||||
//#define Z4_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE TMC2209
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
//#define E3_DRIVER_TYPE A4988
|
||||
@@ -742,7 +743,7 @@
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 421 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.5, 80.5, 400, 415 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
@@ -762,7 +763,7 @@
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 800 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 100, 800 }
|
||||
|
||||
#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
@@ -778,9 +779,9 @@
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
// @efim-a-efim - decreased E0 acceleration to make it less noisy (yes, even with TMC2208 drivers)
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_ACCELERATION 1150 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
@@ -792,15 +793,15 @@
|
||||
*/
|
||||
#define CLASSIC_JERK
|
||||
#if ENABLED(CLASSIC_JERK)
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_XJERK 17.0
|
||||
#define DEFAULT_YJERK 17.0
|
||||
#define DEFAULT_ZJERK 0.5
|
||||
|
||||
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
||||
|
||||
#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2
|
||||
#if ENABLED(LIMITED_JERK_EDITING)
|
||||
#define MAX_JERK_EDIT_VALUES { 20, 20, 2, 20 } // ...or, set your own edit limits
|
||||
#define MAX_JERK_EDIT_VALUES { 30, 30, 2, 20 } // ...or, set your own edit limits
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -843,7 +844,7 @@
|
||||
* The probe replaces the Z-MIN endstop and is used for Z homing.
|
||||
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
|
||||
*/
|
||||
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
// Force the use of the probe for Z-axis homing
|
||||
//#define USE_PROBE_FOR_Z_HOMING
|
||||
@@ -863,7 +864,7 @@
|
||||
* - normally-closed switches to GND and D32.
|
||||
* - normally-open switches to 5V and D32.
|
||||
*/
|
||||
#define Z_MIN_PROBE_PIN BL_TOUCH_Z_PIN // Pin 32 is the RAMPS default
|
||||
//#define Z_MIN_PROBE_PIN BL_TOUCH_Z_PIN // Pin 32 is the RAMPS default
|
||||
|
||||
/**
|
||||
* Probe Type
|
||||
@@ -992,10 +993,10 @@
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define PROBING_MARGIN 30
|
||||
#define PROBING_MARGIN 5
|
||||
|
||||
// X and Y axis travel speed (mm/min) between probes
|
||||
#define XY_PROBE_SPEED (1000)
|
||||
#define XY_PROBE_SPEED 3000
|
||||
|
||||
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||
@@ -1012,7 +1013,7 @@
|
||||
* A total of 2 does fast/slow probes with a weighted average.
|
||||
* A total of 3 or more adds more slow probes, taking the average.
|
||||
*/
|
||||
#define MULTIPLE_PROBING 5
|
||||
#define MULTIPLE_PROBING 2
|
||||
//#define EXTRA_PROBING 1
|
||||
|
||||
/**
|
||||
@@ -1031,7 +1032,7 @@
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes
|
||||
#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes
|
||||
#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
@@ -1139,7 +1140,7 @@
|
||||
#define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
|
||||
|
||||
#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
|
||||
//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
|
||||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
@@ -1150,8 +1151,8 @@
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 255
|
||||
#define Y_BED_SIZE 210
|
||||
#define X_BED_SIZE 250
|
||||
#define Y_BED_SIZE 207
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
@@ -1416,8 +1417,8 @@
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT (0) // X point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT (0) // Y point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
|
||||
#endif
|
||||
|
||||
// Homing speeds (mm/m)
|
||||
@@ -1562,14 +1563,14 @@ EEPROM_W25Q
|
||||
// @section temperature
|
||||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_LABEL "PETG"
|
||||
#define PREHEAT_1_TEMP_HOTEND 235
|
||||
#define PREHEAT_1_TEMP_BED 80
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 190
|
||||
#define PREHEAT_1_TEMP_BED 50
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 250
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_LABEL "PETG"
|
||||
#define PREHEAT_2_TEMP_HOTEND 235
|
||||
#define PREHEAT_2_TEMP_BED 80
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
/**
|
||||
@@ -1696,7 +1697,7 @@ EEPROM_W25Q
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
//#define PRINTCOUNTER
|
||||
#define PRINTCOUNTER
|
||||
|
||||
/**
|
||||
* Password
|
||||
@@ -2270,8 +2271,8 @@ EEPROM_W25Q
|
||||
//
|
||||
//#define TFT_320x240
|
||||
//#define TFT_320x240_SPI
|
||||
#define TFT_480x320
|
||||
//#define TFT_480x320_SPI
|
||||
//#define TFT_480x320
|
||||
#define TFT_480x320_SPI
|
||||
|
||||
//
|
||||
// Skip autodetect and force specific TFT driver
|
||||
|
||||
@@ -965,15 +965,17 @@ void setup() {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
MYSERIAL0.begin(BAUDRATE);
|
||||
uint32_t serial_connect_timeout = millis() + 1000UL;
|
||||
while (!MYSERIAL0 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
|
||||
#if HAS_MULTI_SERIAL
|
||||
MYSERIAL1.begin(BAUDRATE);
|
||||
serial_connect_timeout = millis() + 1000UL;
|
||||
while (!MYSERIAL1 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
|
||||
#endif
|
||||
SERIAL_ECHO_MSG("start");
|
||||
#if NUM_SERIAL > 0
|
||||
MYSERIAL0.begin(USB_BAUDRATE);
|
||||
uint32_t serial_connect_timeout = millis() + 1000UL;
|
||||
while (!MYSERIAL0 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
|
||||
#if HAS_MULTI_SERIAL
|
||||
MYSERIAL1.begin(BAUDRATE);
|
||||
serial_connect_timeout = millis() + 1000UL;
|
||||
while (!MYSERIAL1 && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
|
||||
#endif
|
||||
SERIAL_ECHO_MSG("start");
|
||||
#endif
|
||||
|
||||
#if BOTH(HAS_TFT_LVGL_UI, USE_WIFI_FUNCTION)
|
||||
mks_esp_wifi_init();
|
||||
|
||||
@@ -188,7 +188,6 @@ https://easyeda.com/sst78rust/fb4s-led-control
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC3 // HEATER1
|
||||
#define HEATER_1_PIN PB0 // HEATER2
|
||||
#define HEATER_BED_PIN PA0 // HOT BED
|
||||
|
||||
#if HOTENDS == 1
|
||||
|
||||
Reference in New Issue
Block a user