Nybbles & Bits

Marlin/src/libs/W25Qxx.cpp

@@ -191,11 +191,11 @@ void W25QXXFlash::SPI_FLASH_SectorErase(uint32_t SectorAddr) {
   W25QXX_CS_L;
   // Send Sector Erase instruction
   spi_flash_Send(W25X_SectorErase);
-  // Send SectorAddr high nibble address byte
+  // Send SectorAddr high nybble address byte
   spi_flash_Send((SectorAddr & 0xFF0000) >> 16);
-  // Send SectorAddr medium nibble address byte
+  // Send SectorAddr medium nybble address byte
   spi_flash_Send((SectorAddr & 0xFF00) >> 8);
-  // Send SectorAddr low nibble address byte
+  // Send SectorAddr low nybble address byte
   spi_flash_Send(SectorAddr & 0xFF);
   // Deselect the FLASH: Chip Select high
 
@@ -209,11 +209,11 @@ void W25QXXFlash::SPI_FLASH_BlockErase(uint32_t BlockAddr) {
   W25QXX_CS_L;
   // Send Sector Erase instruction
   spi_flash_Send(W25X_BlockErase);
-  // Send SectorAddr high nibble address byte
+  // Send SectorAddr high nybble address byte
   spi_flash_Send((BlockAddr & 0xFF0000) >> 16);
-  // Send SectorAddr medium nibble address byte
+  // Send SectorAddr medium nybble address byte
   spi_flash_Send((BlockAddr & 0xFF00) >> 8);
-  // Send SectorAddr low nibble address byte
+  // Send SectorAddr low nybble address byte
   spi_flash_Send(BlockAddr & 0xFF);
 
   W25QXX_CS_H;
@@ -265,11 +265,11 @@ void W25QXXFlash::SPI_FLASH_PageWrite(uint8_t* pBuffer, uint32_t WriteAddr, uint
   W25QXX_CS_L;
   // Send "Write to Memory " instruction
   spi_flash_Send(W25X_PageProgram);
-  // Send WriteAddr high nibble address byte to write to
+  // Send WriteAddr high nybble address byte to write to
   spi_flash_Send((WriteAddr & 0xFF0000) >> 16);
-  // Send WriteAddr medium nibble address byte to write to
+  // Send WriteAddr medium nybble address byte to write to
   spi_flash_Send((WriteAddr & 0xFF00) >> 8);
-  // Send WriteAddr low nibble address byte to write to
+  // Send WriteAddr low nybble address byte to write to
   spi_flash_Send(WriteAddr & 0xFF);
 
   NOMORE(NumByteToWrite, SPI_FLASH_PerWritePageSize);
@@ -371,11 +371,11 @@ void W25QXXFlash::SPI_FLASH_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint
   // Send "Read from Memory " instruction
   spi_flash_Send(W25X_ReadData);
 
-  // Send ReadAddr high nibble address byte to read from
+  // Send ReadAddr high nybble address byte to read from
   spi_flash_Send((ReadAddr & 0xFF0000) >> 16);
-  // Send ReadAddr medium nibble address byte to read from
+  // Send ReadAddr medium nybble address byte to read from
   spi_flash_Send((ReadAddr & 0xFF00) >> 8);
-  // Send ReadAddr low nibble address byte to read from
+  // Send ReadAddr low nybble address byte to read from
   spi_flash_Send(ReadAddr & 0xFF);
 
   if (NumByteToRead <= 32 || !flash_dma_mode) {

Marlin/src/module/planner.cpp

@@ -418,11 +418,11 @@ void Planner::init() {
         L("2")
         A("cpi %16,0x10")                 // (nr & 0xF00000) == 0 ?
         A("brcc 3f")                      // No, skip this
-        A("swap %15")                     // Swap nibbles
+        A("swap %15")                     // Swap nybbles
-        A("swap %16")                     // Swap nibbles. Low nibble is 0
+        A("swap %16")                     // Swap nybbles. Low nybble is 0
         A("mov %14, %15")
-        A("andi %14,0x0F")                // Isolate low nibble
+        A("andi %14,0x0F")                // Isolate low nybble
-        A("andi %15,0xF0")                // Keep proper nibble in %15
+        A("andi %15,0xF0")                // Keep proper nybble in %15
         A("or %16, %14")                  // %16:%15 <<= 4
         A("subi %3,-4")                   // idx += 4
 
@@ -473,10 +473,10 @@ void Planner::init() {
         L("9")
         A("sbrs %3,2")                    // shift by 4bits position?
         A("rjmp 16f")                     // No
-        A("swap %15")                     // Swap nibbles. lo nibble of %15 will always be 0
+        A("swap %15")                     // Swap nybbles. lo nybble of %15 will always be 0
-        A("swap %14")                     // Swap nibbles
+        A("swap %14")                     // Swap nybbles
         A("mov %12,%14")
-        A("andi %12,0x0F")                // isolate low nibble
+        A("andi %12,0x0F")                // isolate low nybble
         A("andi %14,0xF0")                // and clear it
         A("or %15,%12")                   // %15:%16 <<= 4
         L("16")
@@ -504,11 +504,11 @@ void Planner::init() {
         L("11")
         A("sbrs %3,2")                    // shift by 4 bit position ?
         A("rjmp 12f")                     // No, skip it
-        A("swap %15")                     // Swap nibbles
+        A("swap %15")                     // Swap nybbles
-        A("andi %14, 0xF0")               // Lose the lowest nibble
+        A("andi %14, 0xF0")               // Lose the lowest nybble
-        A("swap %14")                     // Swap nibbles. Upper nibble is 0
+        A("swap %14")                     // Swap nybbles. Upper nybble is 0
-        A("or %14,%15")                   // Pass nibble from upper byte
+        A("or %14,%15")                   // Pass nybble from upper byte
-        A("andi %15, 0x0F")               // And get rid of that nibble
+        A("andi %15, 0x0F")               // And get rid of that nybble
         L("12")
         A("sbrs %3,3")                    // shift by 8 bit position ?
         A("rjmp 6f")                      // No, skip it

Marlin/src/sd/usb_flashdrive/lib-uhs2/printhex.h

@@ -32,12 +32,12 @@ void E_Notifyc(char c, int lvl);
 
 template <class T>
 void PrintHex(T val, int lvl) {
-  int num_nibbles = sizeof (T) * 2;
+  int num_nybbles = sizeof (T) * 2;
   do {
-    char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0F);
+    char v = 48 + (((val >> (num_nybbles - 1) * 4)) & 0x0F);
     if (v > 57) v += 7;
     E_Notifyc(v, lvl);
-  } while (--num_nibbles);
+  } while (--num_nybbles);
 }
 
 template <class T>
@@ -48,12 +48,12 @@ void PrintBin(T val, int lvl) {
 
 template <class T>
 void SerialPrintHex(T val) {
-  int num_nibbles = sizeof (T) * 2;
+  int num_nybbles = sizeof (T) * 2;
   do {
-    char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0F);
+    char v = 48 + (((val >> (num_nybbles - 1) * 4)) & 0x0F);
     if (v > 57) v += 7;
     USB_HOST_SERIAL.print(v);
-  } while (--num_nibbles);
+  } while (--num_nybbles);
 }
 
 template <class T>

Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_printhex.h

@@ -33,13 +33,13 @@ void E_Notifyc(char c, int lvl);
 
 template <class T>
 void PrintHex(T val, int lvl) {
-        int num_nibbles = sizeof (T) * 2;
+        int num_nybbles = sizeof (T) * 2;
 
         do {
-                char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0F);
+                char v = 48 + (((val >> (num_nybbles - 1) * 4)) & 0x0F);
                 if(v > 57) v += 7;
                 E_Notifyc(v, lvl);
-        } while(--num_nibbles);
+        } while(--num_nybbles);
 }
 
 template <class T>
@@ -53,13 +53,13 @@ void PrintBin(T val, int lvl) {
 
 template <class T>
 void SerialPrintHex(T val) {
-        int num_nibbles = sizeof (T) * 2;
+        int num_nybbles = sizeof (T) * 2;
 
         do {
-                char v = 48 + (((val >> (num_nibbles - 1) * 4)) & 0x0F);
+                char v = 48 + (((val >> (num_nybbles - 1) * 4)) & 0x0F);
                 if(v > 57) v += 7;
                 USB_HOST_SERIAL.print(v);
-        } while(--num_nibbles);
+        } while(--num_nybbles);
 }
 
 template <class T>

Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/USB_HOST_SHIELD/USB_HOST_SHIELD_INLINE.h

@@ -96,7 +96,7 @@ uint8_t* UHS_NI MAX3421E_HOST::bytesWr(uint8_t reg, uint8_t nbytes, uint8_t* dat
 /* GPIO write                                           */
 /*GPIO byte is split between 2 registers, so two writes are needed to write one byte */
 
-/* GPOUT bits are in the low nibble. 0-3 in IOPINS1, 4-7 in IOPINS2 */
+/* GPOUT bits are in the low nybble. 0-3 in IOPINS1, 4-7 in IOPINS2 */
 void UHS_NI MAX3421E_HOST::gpioWr(uint8_t data) {
         regWr(rIOPINS1, data);
         data >>= 4;
@@ -132,11 +132,11 @@ uint8_t* UHS_NI MAX3421E_HOST::bytesRd(uint8_t reg, uint8_t nbytes, uint8_t* dat
 
 /* GPIO read. See gpioWr for explanation */
 
-/* GPIN pins are in high nibbles of IOPINS1, IOPINS2    */
+/* GPIN pins are in high nybbles of IOPINS1, IOPINS2    */
 uint8_t UHS_NI MAX3421E_HOST::gpioRd() {
         uint8_t gpin = 0;
         gpin = regRd(rIOPINS2); //pins 4-7
-        gpin &= 0xF0; //clean lower nibble
+        gpin &= 0xF0; //clean lower nybble
         gpin |= (regRd(rIOPINS1) >> 4); //shift low bits and OR with upper from previous operation.
         return ( gpin);
 }