andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

🎨 Add EXP1/2 headers, adjust TFT pins (#24230)

FB4S_WIFI
Scott Lahteine 3 years ago
committed by Scott Lahteine
parent
e0deb75764
commit
4831cbebd8
17 changed files with 333 additions and 186 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
  2. 2
      Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
  3. 3
      Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
  4. 25
      Marlin/src/pins/mega/pins_CNCONTROLS_11.h
  5. 26
      Marlin/src/pins/mega/pins_CNCONTROLS_12.h
  6. 2
      Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
  7. 81
      Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
  8. 78
      Marlin/src/pins/sam/pins_RURAMPS4D_11.h
  9. 83
      Marlin/src/pins/sam/pins_RURAMPS4D_13.h
  10. 129
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
  11. 3
      Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
  12. 8
      Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
  13. 6
      Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
  14. 6
      Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h
  15. 5
      Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
  16. 58
      Marlin/src/pins/stm32f4/pins_VAKE403D.h
  17. 2
      Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h

2
Marlin/src/HAL/STM32F1/tft/tft_spi.cpp
View File

@ -30,7 +30,7 @@ SPIClass TFT_SPI::SPIx(1);
void TFT_SPI::Init() {
#if PIN_EXISTS(TFT_RESET)
OUT_WRITE(TFT_RST_PIN, HIGH);
OUT_WRITE(TFT_RESET_PIN, HIGH);
delay(100);
#endif

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View File

@ -310,7 +310,7 @@
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_RST_PIN EXP2_04_PIN
//#define TFT_RST_PIN EXP2_04_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN

3
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
View File

@ -339,9 +339,10 @@
#define KILL_PIN -1 // NC
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_A0_PIN EXP1_03_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_RESET_PIN EXP1_07_PIN

25
Marlin/src/pins/mega/pins_CNCONTROLS_11.h
View File

@ -135,17 +135,20 @@
//
// LCD / Controller
//
#define BEEPER_PIN 6
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
#if HAS_WIRED_LCD
#define BEEPER_PIN 6
#define BTN_EN1 23
#define BTN_EN2 25
#define BTN_ENC 27
#if HAS_MARLINUI_U8GLIB
#define DOGLCD_A0 26
#define DOGLCD_CS 24
#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h
#define DOGLCD_SCK -1
#endif
#endif
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT_PIN 19

26
Marlin/src/pins/mega/pins_CNCONTROLS_12.h
View File

@ -140,18 +140,20 @@
//
// LCD / Controller
//
#define BEEPER_PIN 16
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
// The encoder and click button
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
#if HAS_WIRED_LCD
#define BEEPER_PIN 16
#define BTN_EN1 36
#define BTN_EN2 34
#define BTN_ENC 38
#if HAS_MARLINUI_U8GLIB
#define DOGLCD_A0 39
#define DOGLCD_CS 35
#define DOGLCD_MOSI 48
#define DOGLCD_SCK 49
#endif
#endif
// Hardware buttons for manual movement of XYZ
#define SHIFT_OUT_PIN 42

2
Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h
View File

@ -158,7 +158,7 @@
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN
#undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it
#define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments
// as the wiring diagram uses pin 44 for DOGLCD_A0
// as the wiring diagram uses pin 44 for DOGLCD_A0.
#endif
//

81
Marlin/src/pins/sam/pins_RAMPS_FD_V1.h
View File

@ -134,71 +134,98 @@
#define SDSS 4
#define LED_PIN 13
/** ------ ------
* 37 |10 9 | 35 (MISO) 50 |10 9 | 76 (SCK)
* 29 | 8 7 | 27 (EN2) 31 | 8 7 | 4 (SD_SS)
* 25 6 5 | 23 (EN1) 33 6 5 | 75 (MOSI)
* 16 | 4 3 | 17 (SDD) 49 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN 17
#define EXP1_04_PIN 16
#define EXP1_05_PIN 23
#define EXP1_06_PIN 25
#define EXP1_07_PIN 27
#define EXP1_08_PIN 29
#define EXP1_09_PIN 35
#define EXP1_10_PIN 37
#define EXP2_03_PIN -1
#define EXP2_04_PIN 49
#define EXP2_05_PIN 75
#define EXP2_06_PIN 33
#define EXP2_07_PIN 4
#define EXP2_08_PIN 31
#define EXP2_09_PIN 76
#define EXP2_10_PIN 74
//
// LCD / Controller
//
#if HAS_WIRED_LCD
// ramps-fd lcd adaptor
#define BEEPER_PIN 37
#define BTN_EN1 33
#define BTN_EN2 31
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 EXP2_06_PIN
#define BTN_EN2 EXP2_08_PIN
#define BTN_ENC EXP1_09_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#if IS_NEWPANEL
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#endif
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS
#define DOGLCD_SCK 76
#define DOGLCD_MOSI 75
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_05_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 25
#define RGB_LED_R_PIN EXP1_06_PIN
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 27
#define RGB_LED_G_PIN EXP1_07_PIN
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 29
#define RGB_LED_B_PIN EXP1_08_PIN
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN 25
#define NEOPIXEL_PIN EXP1_06_PIN
#endif
#elif IS_NEWPANEL
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#define LCD_PINS_D4 EXP1_05_PIN
#define LCD_PINS_D5 EXP1_06_PIN
#define LCD_PINS_D6 EXP1_07_PIN
#define LCD_PINS_D7 EXP1_08_PIN
#if ENABLED(MINIPANEL)
#define DOGLCD_CS 25
#define DOGLCD_A0 27
#define DOGLCD_CS EXP1_06_PIN
#define DOGLCD_A0 EXP1_07_PIN
#endif
#endif
#if ANY(VIKI2, miniVIKI)
#define DOGLCD_A0 16
#define DOGLCD_A0 EXP1_04_PIN
#define KILL_PIN 51
#define STAT_LED_BLUE_PIN 29
#define STAT_LED_RED_PIN 23
#define DOGLCD_CS 17
#define DOGLCD_SCK 76 // SCK_PIN - Required for DUE Hardware SPI
#define DOGLCD_MOSI 75 // MOSI_PIN
#define DOGLCD_MISO 74 // MISO_PIN
#define STAT_LED_BLUE_PIN EXP1_08_PIN
#define STAT_LED_RED_PIN EXP1_05_PIN
#define DOGLCD_CS EXP1_03_PIN
#define DOGLCD_SCK EXP2_09_PIN // SCK_PIN - Required for DUE Hardware SPI
#define DOGLCD_MOSI EXP2_05_PIN // MOSI_PIN
#define DOGLCD_MISO EXP2_10_PIN // MISO_PIN
#endif
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)

78
Marlin/src/pins/sam/pins_RURAMPS4D_11.h
View File

@ -153,7 +153,7 @@
// SPI for MAX Thermocouple
/*
#if DISABLED(SDSUPPORT)
#define TEMP_0_CS_PIN 53
#define TEMP_0_CS_PIN EXP1_03_PIN
#else
#define TEMP_0_CS_PIN 49
#endif
@ -190,59 +190,87 @@
// 32Mb FLASH
//#define SPI_FLASH_CS_PIN ?
/**
* ------ ------
* (BEEPER) 62 |10 9 | 40 (BTN_ENC) (MISO) 74 |10 9 | 76 (SCK)
* (LCD_EN) 64 | 8 7 | 63 (LCD_RS) (BTN_EN1) 44 | 8 7 | 10 (SD_SS)
* (LCD_D4) 48 | 6 5 50 (LCD_D5) (BTN_EN2) 42 | 6 5 75 (MOSI)
* (LCD_D6) 52 | 4 3 | 53 (LCD_D7) (SD_DETECT) 51 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN 53
#define EXP1_04_PIN 52
#define EXP1_05_PIN 50
#define EXP1_06_PIN 48
#define EXP1_07_PIN 63
#define EXP1_08_PIN 64
#define EXP1_09_PIN 40
#define EXP1_10_PIN 62
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN 51
#define EXP2_05_PIN 75 // MOSI
#define EXP2_06_PIN 42
#define EXP2_07_PIN 10
#define EXP2_08_PIN 44
#define EXP2_09_PIN 76 // SCK
#define EXP2_10_PIN 74 // MISO
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#if ANY(RADDS_DISPLAY, IS_RRD_SC, IS_RRD_FG_SC)
#define BEEPER_PIN 62
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#define BEEPER_PIN EXP1_10_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#if EITHER(RADDS_DISPLAY, IS_RRD_SC)
#define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#elif IS_RRD_FG_SC
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#elif HAS_U8GLIB_I2C_OLED
#define BEEPER_PIN 62
#define LCD_SDSS 10
#define SD_DETECT_PIN 51
#define BEEPER_PIN EXP1_10_PIN
#define LCD_SDSS EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 62
#define DOGLCD_CS 64
#define DOGLCD_A0 63
#define BEEPER_PIN EXP1_10_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // D5
#define RGB_LED_R_PIN EXP1_05_PIN // D5
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // D6
#define RGB_LED_G_PIN EXP1_04_PIN // D6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53 // D7
#define RGB_LED_B_PIN EXP1_03_PIN // D7
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN 50 // D5
#define NEOPIXEL_PIN EXP1_05_PIN // D5
#endif
#elif ENABLED(SPARK_FULL_GRAPHICS)
@ -259,9 +287,9 @@
#endif // SPARK_FULL_GRAPHICS
#if IS_NEWPANEL
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)

83
Marlin/src/pins/sam/pins_RURAMPS4D_13.h
View File

@ -173,74 +173,101 @@
// 32Mb FLASH
//#define SPI_FLASH_CS_PIN ?
/**
* ------ ------
* (BEEPER) 62 |10 9 | 40 (BTN_ENC) (MISO) 74 |10 9 | 76 (SCK)
* (LCD_EN) 64 | 8 7 | 63 (LCD_RS) (BTN_EN1) 44 | 8 7 | 10 (SD_SS)
* (LCD_D4) 48 | 6 5 50 (LCD_D5) (BTN_EN2) 42 | 6 5 75 (MOSI)
* (LCD_D6) 52 | 4 3 | 53 (LCD_D7) (SD_DETECT) 51 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | --
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN 53
#define EXP1_04_PIN 52
#define EXP1_05_PIN 50
#define EXP1_06_PIN 48
#define EXP1_07_PIN 63
#define EXP1_08_PIN 64
#define EXP1_09_PIN 40
#define EXP1_10_PIN 62
#define EXP2_03_PIN -1 // RESET
#define EXP2_04_PIN 51
#define EXP2_05_PIN 75 // MOSI
#define EXP2_06_PIN 42
#define EXP2_07_PIN 10
#define EXP2_08_PIN 44
#define EXP2_09_PIN 76 // SCK
#define EXP2_10_PIN 74 // MISO
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#if ANY(RADDS_DISPLAY, IS_RRD_SC, IS_RRD_FG_SC)
#define BEEPER_PIN 62
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define SD_DETECT_PIN 51
#define BEEPER_PIN EXP1_10_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#if EITHER(RADDS_DISPLAY, IS_RRD_SC)
#define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#elif IS_RRD_FG_SC
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
#define LCD_PINS_RS EXP1_04_PIN
#define LCD_PINS_ENABLE EXP1_03_PIN
#elif HAS_U8GLIB_I2C_OLED
#define BEEPER_PIN 62
#define LCD_SDSS 10
#define SD_DETECT_PIN 51
#define BEEPER_PIN EXP1_10_PIN
#define LCD_SDSS EXP2_07_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 62
#define DOGLCD_CS 64
#define DOGLCD_A0 63
#define BEEPER_PIN EXP1_10_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 EXP1_07_PIN
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // D5
#define RGB_LED_R_PIN EXP1_05_PIN // D5
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // D6
#define RGB_LED_G_PIN EXP1_04_PIN // D6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53 // D7
#define RGB_LED_B_PIN EXP1_03_PIN // D7
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define NEOPIXEL_PIN 50 // D5
#define NEOPIXEL_PIN EXP1_05_PIN // D5
#endif
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_A0 52
#define DOGLCD_CS 50
#define SD_DETECT_PIN 51
#define SD_DETECT_PIN EXP2_04_PIN
#endif
#if IS_NEWPANEL
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)

129
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h
View File

@ -205,6 +205,34 @@
//#define LED_PIN PB2
/**
* ------ ------
* PC5 |10 9 | PE13 PA6 |10 9 | PA5
* PD13 | 8 7 | PC6 PE8 | 8 7 | PE10
* PE14 | 6 5 PE15 PE11 | 6 5 PA7
* PD11 | 4 3 | PD10 PE12 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PD10
#define EXP1_04_PIN PD11
#define EXP1_05_PIN PE15
#define EXP1_06_PIN PE14
#define EXP1_07_PIN PC6
#define EXP1_08_PIN PD13
#define EXP1_09_PIN PE13
#define EXP1_10_PIN PC5
#define EXP2_03_PIN -1
#define EXP2_04_PIN PE12
#define EXP2_05_PIN PA7
#define EXP2_06_PIN PE11
#define EXP2_07_PIN PE10
#define EXP2_08_PIN PE8
#define EXP2_09_PIN PA5
#define EXP2_10_PIN PA6
//
// SD Card
//
@ -219,11 +247,11 @@
#define ONBOARD_SD_CS_PIN PC11
#elif SD_CONNECTION_IS(LCD)
#define ENABLE_SPI1
#define SDSS PE10
#define SD_SCK_PIN PA5
#define SD_MISO_PIN PA6
#define SD_MOSI_PIN PA7
#define SD_DETECT_PIN PE12
#define SDSS EXP2_07_PIN
#define SD_SCK_PIN EXP2_09_PIN
#define SD_MISO_PIN EXP2_10_PIN
#define SD_MOSI_PIN EXP2_05_PIN
#define SD_DETECT_PIN EXP2_04_PIN
#endif
//
@ -240,27 +268,26 @@
// Shared SPI TFT
#define LCD_BACKLIGHT_PIN PD13
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#define TOUCH_CS_PIN PE14 // SPI1_NSS
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
#define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS
#define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK
#define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO
#define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define BTN_ENC PE13
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#define TFT_CS_PIN PD11
#define TFT_SCK_PIN PA5
#define TFT_MISO_PIN PA6
#define TFT_MOSI_PIN PA7
#define TFT_DC_PIN PD10
#define TFT_RST_PIN PC6
#define TFT_CS_PIN EXP1_04_PIN
#define TFT_SCK_PIN EXP2_09_PIN
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
@ -271,22 +298,22 @@
#if ENABLED(TFT_CLASSIC_UI)
// Emulated DOGM SPI
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#define BTN_ENC PE13
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_ENC EXP1_09_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#elif ENABLED(TFT_COLOR_UI)
#define TFT_BUFFER_SIZE 14400
#endif
#if HAS_WIRED_LCD && !HAS_SPI_TFT
#define BEEPER_PIN PC5
#define BTN_ENC PE13
#define LCD_PINS_ENABLE PD13
#define LCD_PINS_RS PC6
#define BTN_EN1 PE8
#define BTN_EN2 PE11
#define BEEPER_PIN EXP1_10_PIN
#define BTN_ENC EXP1_09_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define LCD_BACKLIGHT_PIN -1
#if ENABLED(MKS_MINI_12864)
@ -296,18 +323,18 @@
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN -1
#define DOGLCD_A0 PD11
#define DOGLCD_CS PE15
#define DOGLCD_SCK PA5
#define DOGLCD_MOSI PA7
#define DOGLCD_A0 EXP1_04_PIN
#define DOGLCD_CS EXP1_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#elif IS_TFTGLCD_PANEL
#if ENABLED(TFTGLCD_PANEL_SPI)
#define PIN_SPI_SCK PA5
#define PIN_TFT_MISO PA6
#define PIN_TFT_MOSI PA7
#define TFTGLCD_CS PE8
#define PIN_SPI_SCK EXP2_09_PIN
#define PIN_TFT_MISO EXP2_10_PIN
#define PIN_TFT_MOSI EXP2_05_PIN
#define TFTGLCD_CS EXP2_08_PIN
#endif
#ifndef BEEPER_PIN
@ -315,14 +342,14 @@
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#define LCD_PINS_DC PC6
#define DOGLCD_CS PD13
#define LCD_PINS_DC EXP1_07_PIN
#define DOGLCD_CS EXP1_08_PIN
#define DOGLCD_A0 DOGLCD_A0
#define LCD_BACKLIGHT_PIN -1
#define LCD_RESET_PIN PE14
#define NEOPIXEL_PIN PE15
#define DOGLCD_MOSI PA7
#define DOGLCD_SCK PA5
#define LCD_RESET_PIN EXP1_06_PIN
#define NEOPIXEL_PIN EXP1_05_PIN
#define DOGLCD_MOSI EXP2_05_PIN
#define DOGLCD_SCK EXP2_09_PIN
#if SD_CONNECTION_IS(ONBOARD)
#define FORCE_SOFT_SPI
#endif
@ -330,11 +357,11 @@
#else // !MKS_MINI_12864
#define LCD_PINS_D4 PE14
#define LCD_PINS_D4 EXP1_06_PIN
#if IS_ULTIPANEL
#define LCD_PINS_D5 PE15
#define LCD_PINS_D6 PD11
#define LCD_PINS_D7 PD10
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
@ -360,7 +387,7 @@
#endif
#ifndef BEEPER_PIN
#define BEEPER_PIN PC5
#define BEEPER_PIN EXP1_10_PIN
#endif
#if ENABLED(SPEAKER) && BEEPER_PIN == PC5

3
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h
View File

@ -282,11 +282,10 @@
#define TFT_MISO_PIN PA6
#define TFT_MOSI_PIN PA7
#define TFT_DC_PIN PD10
#define TFT_RST_PIN PC6
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN PC6
#define TFT_BACKLIGHT_PIN PD13
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1

8
Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
View File

@ -527,6 +527,11 @@
#endif
#if HAS_SPI_TFT
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
//
// e.g., BTT_TFT35_SPI_V1_0 (480x320, 3.5", SPI Stock Display with Rotary Encoder in BIQU B1 SE)
//
@ -542,9 +547,6 @@
#define TOUCH_SCK_PIN EXP1_06_PIN
#define TOUCH_CS_PIN EXP1_07_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#endif
//

6
Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h
View File

@ -289,16 +289,16 @@
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif

6
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h
View File

@ -283,16 +283,16 @@
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif

5
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h
View File

@ -305,16 +305,15 @@
#define TFT_MISO_PIN EXP2_10_PIN
#define TFT_MOSI_PIN EXP2_05_PIN
#define TFT_DC_PIN EXP1_03_PIN
#define TFT_RST_PIN EXP1_07_PIN
#define TFT_A0_PIN TFT_DC_PIN
#define TFT_RESET_PIN EXP1_07_PIN
#define TFT_BACKLIGHT_PIN EXP1_08_PIN
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN
#define TOUCH_BUTTONS_HW_SPI
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1
#define LCD_BACKLIGHT_PIN EXP1_08_PIN
#ifndef TFT_WIDTH
#define TFT_WIDTH 480
#endif

58
Marlin/src/pins/stm32f4/pins_VAKE403D.h
View File

@ -161,27 +161,61 @@
#define POWER_LOSS_PIN PA4 // ?? Power loss / nAC_FAULT
#if ENABLED(SDSUPPORT)
#define SD_DETECT_PIN PB7
#define SD_SS_PIN PB_15 // USD_CS -> CS for onboard SD
#define SD_DETECT_PIN EXP2_04_PIN
#define SD_SS_PIN PB15 // USD_CS -> CS for onboard SD
#endif
/**
* ------ ------
* PC9 |10 9 | PB12 ? |10 9 | ?
* PD7 | 8 7 | PC12 PD6 | 8 7 | ?
* PD1 | 6 5 PD2 PD0 | 6 5 ?
* PD3 | 4 3 | PD4 PB7 | 4 3 | RESET
* GND | 2 1 | 5V GND | 2 1 | 3.3V
* ------ ------
* EXP1 EXP2
*/
#define EXP1_03_PIN PD4
#define EXP1_04_PIN PD3
#define EXP1_05_PIN PD2
#define EXP1_06_PIN PD1
#define EXP1_07_PIN PC12
#define EXP1_08_PIN PD7
#define EXP1_09_PIN PB12
#define EXP1_10_PIN PC9
#define EXP2_03_PIN -1
#define EXP2_04_PIN PB7
//#define EXP2_05_PIN ?
#define EXP2_06_PIN PD0
//#define EXP2_07_PIN ?
#define EXP2_08_PIN PD6
//#define EXP2_09_PIN ?
//#define EXP2_10_PIN ?
//
// LCD / Controller
//
#if HAS_WIRED_LCD
#if ENABLED(SDSUPPORT)
#define SDSS PB6 // CS for SD card in LCD
#endif
#define BEEPER_PIN PC9
#define LCD_PINS_RS PC12
#define LCD_PINS_ENABLE PD7
#define LCD_PINS_D4 PD1
#define LCD_PINS_D5 PD2
#define LCD_PINS_D6 PD3
#define LCD_PINS_D7 PD4
#define BTN_EN1 PD6
#define BTN_EN2 PD0
#define BTN_ENC PB12
#define BEEPER_PIN EXP1_10_PIN
#define BTN_EN1 EXP2_08_PIN
#define BTN_EN2 EXP2_06_PIN
#define BTN_ENC EXP1_09_PIN
#define LCD_PINS_ENABLE EXP1_08_PIN
#define LCD_PINS_RS EXP1_07_PIN
#define LCD_PINS_D4 EXP1_06_PIN
#define LCD_PINS_D5 EXP1_05_PIN
#define LCD_PINS_D6 EXP1_04_PIN
#define LCD_PINS_D7 EXP1_03_PIN
#endif
// Alter timing for graphical display

2
Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h
View File

@ -50,8 +50,6 @@
#define LED_PIN PA13
#define BEEPER_PIN PA14
#define TFT_BACKLIGHT_PIN PB5
#define POWER_MONITOR_PIN PB0
#define RPI_POWER_PIN PE5

Write Preview
Loading…
Cancel
Save