andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Oscar (by Thinknthings of Korea) board support (#14574)

pull/1/head
Jeonghwan Noh 5 years ago
committed by Scott Lahteine
parent
fdaa374490
commit
475ccfad62
3 changed files with 515 additions and 0 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 1
      Marlin/src/core/boards.h
  2. 2
      Marlin/src/pins/pins.h
  3. 512
      Marlin/src/pins/ramps/pins_TT_OSCAR.h

1
Marlin/src/core/boards.h
View File

@ -93,6 +93,7 @@
#define BOARD_VORON 1139 // VORON Design #define BOARD_VORON 1139 // VORON Design
#define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0 #define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series #define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series
#define BOARD_TT_OSCAR 1142 // TT OSCAR
// //
// RAMBo and derivatives // RAMBo and derivatives

2
Marlin/src/pins/pins.h
View File

@ -176,6 +176,8 @@
#include "ramps/pins_TRONXY_V3_1_0.h" // ATmega2560 env:megaatmega2560 #include "ramps/pins_TRONXY_V3_1_0.h" // ATmega2560 env:megaatmega2560
#elif MB(Z_BOLT_X_SERIES) #elif MB(Z_BOLT_X_SERIES)
#include "ramps/pins_Z_BOLT_X_SERIES.h" // ATmega2560 env:megaatmega2560 #include "ramps/pins_Z_BOLT_X_SERIES.h" // ATmega2560 env:megaatmega2560
#elif MB(TT_OSCAR)
#include "ramps/pins_TT_OSCAR.h" // ATmega2560 env:megaatmega2560
// //
// RAMBo and derivatives // RAMBo and derivatives

512
Marlin/src/pins/ramps/pins_TT_OSCAR.h
View File

@ -0,0 +1,512 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#if HOTENDS > 5 || E_STEPPERS > 5
#error "TTOSCAR supports up to 5 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "TT OSCAR"
#define DEFAULT_MACHINE_NAME BOARD_NAME
//
// Servos
//
#define SERVO0_PIN 11
#define SERVO1_PIN 12
#define SERVO2_PIN 5
#define SERVO3_PIN 4
//
// Limit Switches
//
#define X_MIN_PIN 3
#define X_MAX_PIN 2
#define Y_MIN_PIN 14
#define Y_MAX_PIN 15
#define Z_MIN_PIN 18
#define Z_MAX_PIN 19
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN SERVO3_PIN
#endif
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_CS_PIN 57
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_CS_PIN 58
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z_CS_PIN 53
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E0_CS_PIN 49
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define E1_CS_PIN E0_CS_PIN
#define E2_STEP_PIN 63
#define E2_DIR_PIN 22
#define E2_ENABLE_PIN 59
#define E2_CS_PIN E0_CS_PIN
#define E3_STEP_PIN 32
#define E3_DIR_PIN 40
#define E3_ENABLE_PIN 39
#define E3_CS_PIN E0_CS_PIN
#define E4_STEP_PIN 43
#define E4_DIR_PIN 42
#define E4_ENABLE_PIN 47
#define E4_CS_PIN E0_CS_PIN
#if ENABLED(HAVE_TMC2208)
/**
* TMC2208 stepper drivers
*
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//
// Software serial
//
#define X_SERIAL_TX_PIN -1 // 59
#define X_SERIAL_RX_PIN -1 // 63
#define X2_SERIAL_TX_PIN -1
#define X2_SERIAL_RX_PIN -1
#define Y_SERIAL_TX_PIN -1 // 64
#define Y_SERIAL_RX_PIN -1 // 40
#define Y2_SERIAL_TX_PIN -1
#define Y2_SERIAL_RX_PIN -1
#define Z_SERIAL_TX_PIN -1 // 44
#define Z_SERIAL_RX_PIN -1 // 42
#define Z2_SERIAL_TX_PIN -1
#define Z2_SERIAL_RX_PIN -1
#define E0_SERIAL_TX_PIN -1 // 66
#define E0_SERIAL_RX_PIN -1 // 65
#define E1_SERIAL_TX_PIN -1
#define E1_SERIAL_RX_PIN -1
#define E2_SERIAL_TX_PIN -1
#define E2_SERIAL_RX_PIN -1
#define E3_SERIAL_TX_PIN -1
#define E3_SERIAL_RX_PIN -1
#define E4_SERIAL_TX_PIN -1
#define E4_SERIAL_RX_PIN -1
#endif
//
// Default pins for TMC software SPI
//
//#if ENABLED(TMC_USE_SW_SPI)
// #ifndef TMC_SW_MOSI
// #define TMC_SW_MOSI 66
// #endif
// #ifndef TMC_SW_MISO
// #define TMC_SW_MISO 44
// #endif
// #ifndef TMC_SW_SCK
// #define TMC_SW_SCK 64
// #endif
//#endif
//
// Temperature Sensors
//
#define TEMP_0_PIN 13
#define TEMP_1_PIN 15
#define TEMP_2_PIN 10
#define TEMP_3_PIN 11
#define TEMP_BED_PIN 14
#if TEMP_SENSOR_CHAMBER > 0
#define TEMP_CHAMBER_PIN 12
#else
#define TEMP_4_PIN 12
#endif
// SPI for Max6675 or Max31855 Thermocouple
//#if DISABLED(SDSUPPORT)
// #define MAX6675_SS 66 // Don't use 53 if there is even the remote possibility of using Display/SD card
//#else
// #define MAX6675_SS 66 // Don't use 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
//#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 7
#define HEATER_2_PIN 44
#define HEATER_BED_PIN 8
#define FAN_PIN 9
#if EXTRUDERS >= 5
#define HEATER_4_PIN 6
#else
#define FAN1_PIN 6
#endif
#if EXTRUDERS >= 4
#define HEATER_3_PIN 45
#else
#define FAN2_PIN 45
#endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
//#ifndef FILWIDTH_PIN
// #define FILWIDTH_PIN 5 // Analog Input
//#endif
// DIO 4 (Servos plug) for the runout sensor.
//#define FIL_RUNOUT_PIN SERVO3_PIN
#ifndef PS_ON_PIN
#define PS_ON_PIN 12
#endif
//
// Case Light
//
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if !NUM_SERVOS // Prefer the servo connector
#define CASE_LIGHT_PIN 6 // Hardware PWM
#elif HAS_FREE_AUX2_PINS // Try to use AUX 2
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if !NUM_SERVOS // Prefer the servo connector
#define SPINDLE_LASER_ENABLE_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#elif HAS_FREE_AUX2_PINS // Try to use AUX 2
#define SPINDLE_LASER_ENABLE_PIN 40 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
#define SPINDLE_DIR_PIN 65
#endif
#endif
//
// Průša i3 MK2 Multiplexer Support
//
//#ifndef E_MUX0_PIN
// #define E_MUX0_PIN 58 // Y_CS_PIN
//#endif
//#ifndef E_MUX1_PIN
// #define E_MUX1_PIN 53 // Z_CS_PIN
//#endif
//#ifndef E_MUX2_PIN
// #define E_MUX2_PIN 49 // En_CS_PIN
//#endif
//////////////////////////
// LCDs and Controllers //
//////////////////////////
#if ENABLED(ULTRA_LCD)
//
// LCD Display output pins
//
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
#define LCD_PINS_ENABLE 51 // SID (MOSI)
#define LCD_PINS_D4 52 // SCK (CLK) clock
#elif BOTH(NEWPANEL, PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
#define LCD_PINS_D5 66
#define LCD_PINS_D6 44
#define LCD_PINS_D7 64
#elif ENABLED(ZONESTAR_LCD)
#define LCD_PINS_RS 64
#define LCD_PINS_ENABLE 44
#define LCD_PINS_D4 63
#define LCD_PINS_D5 40
#define LCD_PINS_D6 42
#define LCD_PINS_D7 65
#define ADC_KEYPAD_PIN 12
#else
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 27
#define LCD_PINS_ENABLE 29
#define LCD_PINS_D4 25
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 37
#endif
#else
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
#define LCD_PINS_DC 25 // Set as output on init
#define LCD_PINS_RS 27 // Pull low for 1s to init
// DOGM SPI LCD Support
#define DOGLCD_CS 16
#define DOGLCD_MOSI 17
#define DOGLCD_SCK 23
#define DOGLCD_A0 LCD_PINS_DC
#else
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#endif
#define LCD_PINS_D7 29
#if DISABLED(NEWPANEL)
#define BEEPER_PIN 33
#endif
#endif
#if DISABLED(NEWPANEL)
// Buttons are attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
#endif
#endif
//
// LCD Display input pins
//
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#if ENABLED(CR10_STOCKDISPLAY)
#define BTN_EN1 17
#define BTN_EN2 23
#else
#define BTN_EN1 31
#define BTN_EN2 33
#endif
#define BTN_ENC 35
#define SD_DETECT_PIN 49
//#define KILL_PIN 41
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
#define LCD_BACKLIGHT_PIN 39
#endif
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#define SD_DETECT_PIN 42
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
//#define KILL_PIN 41
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
#define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
#define BTN_ENC -1
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
#elif EITHER(VIKI2, miniVIKI)
#define DOGLCD_CS 45
#define DOGLCD_A0 44
#define LCD_SCREEN_ROT_180
#define BEEPER_PIN 33
#define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35
#define BTN_EN1 22
#define BTN_EN2 7
#define BTN_ENC 39
#define SDSS 53
#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
//#define KILL_PIN 31
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define DOGLCD_CS 29
#define DOGLCD_A0 27
#define BEEPER_PIN 23
#define LCD_BACKLIGHT_PIN 33
#define BTN_EN1 35
#define BTN_EN2 37
#define BTN_ENC 31
#define LCD_SDSS 53
#define SD_DETECT_PIN 49
//#define KILL_PIN 41
#elif ENABLED(MKS_MINI_12864)
#define DOGLCD_A0 27
#define DOGLCD_CS 25
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BEEPER_PIN 37
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
//#define SDSS 53
#define SD_DETECT_PIN 49
//#define KILL_PIN 64
#elif ENABLED(MINIPANEL)
#define BEEPER_PIN 42
// not connected to a pin
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
#define DOGLCD_A0 44
#define DOGLCD_CS 66
// GLCD features
//#define LCD_CONTRAST 190
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#define BTN_EN1 40
#define BTN_EN2 63
#define BTN_ENC 59
#define SDSS 53
#define SD_DETECT_PIN 49
//#define KILL_PIN 64
#else
// Beeper on AUX-4
#define BEEPER_PIN 33
// Buttons are directly attached to AUX-2
#if ENABLED(REPRAPWORLD_KEYPAD)
#define SHIFT_OUT 40
#define SHIFT_CLK 44
#define SHIFT_LD 42
#define BTN_EN1 64
#define BTN_EN2 59
#define BTN_ENC 63
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
#else
#define BTN_EN1 37
#define BTN_EN2 35
#define BTN_ENC 31
#endif
#if ENABLED(G3D_PANEL)
#define SD_DETECT_PIN 49
//#define KILL_PIN 41
#endif
#endif
#endif // NEWPANEL
#endif
Write Preview
Loading…
Cancel
Save