Event G-code for Stop SD Print (#13547)

Co-Authored-By: 7eggert <7eggert@gmx.de> Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
6 years ago · 46445a5a16
76 changed files with 229 additions and 148 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@ -1143,6 +1143,9 @@ void loop() {
        #if ENABLED(POWER_LOSS_RECOVERY)
          card.removeJobRecoveryFile();
        #endif
+        #ifdef EVENT_GCODE_SD_STOP
+          enqueue_and_echo_commands_P(PSTR(EVENT_GCODE_SD_STOP));
+        #endif  
      }
    #endif // SDSUPPORT

--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@ -551,6 +551,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  #endif
 #endif

+#if defined(EVENT_GCODE_SD_STOP) && DISABLED(NOZZLE_PARK_FEATURE)
+  static_assert(NULL == strstr(EVENT_GCODE_SD_STOP, "G27"), "NOZZLE_PARK_FEATURE is required to use G27 in EVENT_GCODE_SD_STOP.");
+#endif
+
 /**
 * I2C Position Encoders
 */
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@ -777,8 +777,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@ -778,8 +778,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@ -769,8 +769,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@ -777,8 +777,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@ -777,8 +777,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Geeetech/Prusa
+++ b/config/examples/Geeetech/Prusa
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@ -774,8 +774,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@ -770,8 +770,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  //#define EVENT_GCODE_SD_STOP "G28XY"     // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@ -786,8 +786,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/Wanhao/Duplicator
+++ b/config/examples/Wanhao/Duplicator
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/Geeetech/Rostock
+++ b/config/examples/delta/Geeetech/Rostock
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/Monster/Configuration_adv.h
+++ b/Monster/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@ -771,8 +771,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@ -772,8 +772,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@ -773,8 +773,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G27"         // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@ -774,8 +774,9 @@
  // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
  #define SDCARD_RATHERRECENTFIRST

-  // Add an option in the menu to run all auto#.g files
-  //#define MENU_ADDAUTOSTART
+  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
+
+  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")

  /**
   * Continue after Power-Loss (Creality3D)