Browse Source

Merge pull request #8326 from Vynt-1/bugfix-2.0.x

[2.0] Add new board from Russia
pull/1/head
Scott Lahteine 7 years ago
committed by GitHub
parent
commit
450c5f0814
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 2
      Marlin/src/config/examples/Mks/Sbase/Configuration.h
  2. 1
      Marlin/src/core/boards.h
  3. 2
      Marlin/src/pins/pins.h
  4. 224
      Marlin/src/pins/pins_RURAMPS4D.h

2
Marlin/src/config/examples/Mks/Sbase/Configuration.h

@ -101,7 +101,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT 0
#define SERIAL_PORT -1
/**
* This setting determines the communication speed of the printer.

1
Marlin/src/core/boards.h

@ -174,6 +174,7 @@
#define BOARD_RAMPS4DUE_EFF 1545 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1)
#define BOARD_RAMPS4DUE_EEF 1546 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan)
#define BOARD_RAMPS4DUE_SF 1548 // RAMPS4DUE (Power outputs: Spindle, Controller Fan)
#define BOARD_RURAMPS4D 1550 // RuRAMPS4Duo v1 (Power outputs: Hotend0, Hotend2, Hotend2, Fan0, Fan1, Bed)
#define BOARD_ARCHIM2 1590 // UltiMachine Archim2 (with TMC2130 drivers)
#define BOARD_ALLIGATOR 1602 // Alligator Board R2

2
Marlin/src/pins/pins.h

@ -268,6 +268,8 @@
#include "pins_DUE3DOM_MINI.h"
#elif MB(RADDS)
#include "pins_RADDS.h"
#elif MB(RURAMPS4D)
#include "pins_RURAMPS4D.h"
#elif MB(RAMPS_FD_V1)
#include "pins_RAMPS_FD_V1.h"
#elif MB(RAMPS_FD_V2)

224
Marlin/src/pins/pins_RURAMPS4D.h

@ -0,0 +1,224 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Ported sys0724 & Vynt
*/
/**
* Arduino Mega? or Due with RuRAMPS4DUE pin assignments
*
* Applies to the following boards:
* RURAMPS4DUE (Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
*
* Differences between
* RADDS | RuRAMPS4DUE
* A13 | A9/D63 (shares the same pin with AUX2_4PIN)
* A14 | A10/D64 (shares the same pin with AUX2_5PIN)
* A15 | NC
*/
#ifndef __SAM3X8E__
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu."
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RuRAMPS4Due"
#endif
#undef INVERTED_HEATER_PINS
#undef INVERTED_BED_PINS
#undef INVERTED_FAN_PINS
#define I2C_EEPROM
//#define SPI_EEPROM
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 3
#define SERVO2_PIN -1
#define SERVO3_PIN 1
//
// Limit Switches
//
#define X_MIN_PIN 45
#define X_MAX_PIN 39
#define Y_MIN_PIN 46
#define Y_MAX_PIN 41
#define Z_MIN_PIN 49
#define Z_MAX_PIN 43
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 43
#endif
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 36
#define X_ENABLE_PIN 38
#define X_CS_PIN -1
#define Y_STEP_PIN 32
#define Y_DIR_PIN 35
#define Y_ENABLE_PIN 34
#define Y_CS_PIN -1
#define Z_STEP_PIN 30
#define Z_DIR_PIN 2
#define Z_ENABLE_PIN 33
#define Z_CS_PIN -1
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 31
#define E0_CS_PIN -1
#define E1_STEP_PIN 22
#define E1_DIR_PIN 24
#define E1_ENABLE_PIN 26
#define E1_CS_PIN -1
#define E2_STEP_PIN 25 //14 //sys0724
#define E2_DIR_PIN 23 //15
#define E2_ENABLE_PIN 27 //61
#define E2_CS_PIN -1
// For Extension Board V2
// http://doku.radds.org/dokumentation/extension-board
//#define E3_STEP_PIN 35
//#define E3_DIR_PIN 33
//#define E3_ENABLE_PIN 37
//#define E3_CS_PIN 6
//#define Z2_STEP_PIN 29
//#define Z2_DIR_PIN 27
//#define Z2_ENABLE_PIN 31
//#define Z2_CS_PIN 39
// Microstepping pins - Mapping not from fastio.h (?)
//#define E3_MS1_PIN 67
//#define E3_MS2_PIN 68
//#define E3_MS3_PIN 69
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG NUMBERING #54
#define TEMP_1_PIN 1 // ANALOG NUMBERING #55
#define TEMP_2_PIN 2 // ANALOG NUMBERING #56
#define TEMP_3_PIN 3 // ANALOG NUMBERING #57
#define TEMP_BED_PIN 4 // ANALOG NUMBERING #58
/*
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53
#else
#define MAX6675_SS 49
#endif
*/
//
// Heaters / Fans
//
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9
#define FAN1_PIN 8
//
// Misc. Functions
//
#define SDSS 4 // 4,10,52 if using HW SPI.
#define LED_PIN 13
//#define FIL_RUNOUT_PIN Y_MIN_PIN
//
// LCD / Controller
//
#if ENABLED(ULTRA_LCD)
// RADDS LCD panel
#if ENABLED(RADDS_DISPLAY) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS 63
#define LCD_PINS_ENABLE 64
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define BEEPER_PIN 62
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define SD_DETECT_PIN 51
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 52 //?
#define LCD_PINS_ENABLE 53 //?
#define LCD_PINS_D4 48 //?
#define LCD_PINS_D5 50 //?
#define LCD_PINS_D6 52 //?
#define LCD_PINS_D7 53 //?
#define BEEPER_PIN 62
#define BTN_EN1 44 //!
#define BTN_EN2 42 //!
#define BTN_ENC 40
#define SD_DETECT_PIN 51
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 44 //?
#define BTN_EN2 42 //?
#define BTN_ENC 40 //?
#define SD_DETECT_PIN 51 //?
#define BEEPER_PIN 62 //?
#define LCD_SDSS 10 //?
#elif ENABLED(SPARK_FULL_GRAPHICS) //!!! - check!
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD
Loading…
Cancel
Save