Scott Lahteine
7 years ago
committed by
GitHub
6 changed files with 231 additions and 4 deletions
@ -0,0 +1,224 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
* |
|||
* Ported sys0724 & Vynt |
|||
*/ |
|||
|
|||
/**
|
|||
* Arduino Mega? or Due with RuRAMPS4DUE pin assignments |
|||
* |
|||
* Applies to the following boards: |
|||
* RURAMPS4DUE (Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed) |
|||
* |
|||
* Differences between |
|||
* RADDS | RuRAMPS4DUE |
|||
* A13 | A9/D63 (shares the same pin with AUX2_4PIN) |
|||
* A14 | A10/D64 (shares the same pin with AUX2_5PIN) |
|||
* A15 | NC |
|||
*/ |
|||
|
|||
#ifndef __SAM3X8E__ |
|||
#error "Oops! Make sure you have 'Arduino Due' selected from the 'Tools -> Boards' menu." |
|||
#endif |
|||
|
|||
#ifndef BOARD_NAME |
|||
#define BOARD_NAME "RuRAMPS4Due" |
|||
#endif |
|||
|
|||
#undef INVERTED_HEATER_PINS |
|||
#undef INVERTED_BED_PINS |
|||
#undef INVERTED_FAN_PINS |
|||
|
|||
#define I2C_EEPROM |
|||
//#define SPI_EEPROM
|
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN 5 |
|||
#define SERVO1_PIN 3 |
|||
#define SERVO2_PIN -1 |
|||
#define SERVO3_PIN 1 |
|||
|
|||
//
|
|||
// Limit Switches
|
|||
//
|
|||
#define X_MIN_PIN 45 |
|||
#define X_MAX_PIN 39 |
|||
#define Y_MIN_PIN 46 |
|||
#define Y_MAX_PIN 41 |
|||
#define Z_MIN_PIN 49 |
|||
#define Z_MAX_PIN 43 |
|||
|
|||
//
|
|||
// Z Probe (when not Z_MIN_PIN)
|
|||
//
|
|||
#ifndef Z_MIN_PROBE_PIN |
|||
#define Z_MIN_PROBE_PIN 43 |
|||
#endif |
|||
|
|||
//
|
|||
// Steppers
|
|||
//
|
|||
#define X_STEP_PIN 37 |
|||
#define X_DIR_PIN 36 |
|||
#define X_ENABLE_PIN 38 |
|||
#define X_CS_PIN -1 |
|||
|
|||
#define Y_STEP_PIN 32 |
|||
#define Y_DIR_PIN 35 |
|||
#define Y_ENABLE_PIN 34 |
|||
#define Y_CS_PIN -1 |
|||
|
|||
#define Z_STEP_PIN 30 |
|||
#define Z_DIR_PIN 2 |
|||
#define Z_ENABLE_PIN 33 |
|||
#define Z_CS_PIN -1 |
|||
|
|||
#define E0_STEP_PIN 29 |
|||
#define E0_DIR_PIN 28 |
|||
#define E0_ENABLE_PIN 31 |
|||
#define E0_CS_PIN -1 |
|||
|
|||
#define E1_STEP_PIN 22 |
|||
#define E1_DIR_PIN 24 |
|||
#define E1_ENABLE_PIN 26 |
|||
#define E1_CS_PIN -1 |
|||
|
|||
#define E2_STEP_PIN 25 //14 //sys0724
|
|||
#define E2_DIR_PIN 23 //15
|
|||
#define E2_ENABLE_PIN 27 //61
|
|||
#define E2_CS_PIN -1 |
|||
|
|||
// For Extension Board V2
|
|||
// http://doku.radds.org/dokumentation/extension-board
|
|||
//#define E3_STEP_PIN 35
|
|||
//#define E3_DIR_PIN 33
|
|||
//#define E3_ENABLE_PIN 37
|
|||
//#define E3_CS_PIN 6
|
|||
|
|||
//#define Z2_STEP_PIN 29
|
|||
//#define Z2_DIR_PIN 27
|
|||
//#define Z2_ENABLE_PIN 31
|
|||
//#define Z2_CS_PIN 39
|
|||
|
|||
// Microstepping pins - Mapping not from fastio.h (?)
|
|||
//#define E3_MS1_PIN 67
|
|||
//#define E3_MS2_PIN 68
|
|||
//#define E3_MS3_PIN 69
|
|||
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
|
|||
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
|
|||
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
|
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN 0 // ANALOG NUMBERING #54
|
|||
#define TEMP_1_PIN 1 // ANALOG NUMBERING #55
|
|||
#define TEMP_2_PIN 2 // ANALOG NUMBERING #56
|
|||
#define TEMP_3_PIN 3 // ANALOG NUMBERING #57
|
|||
#define TEMP_BED_PIN 4 // ANALOG NUMBERING #58
|
|||
|
|||
/*
|
|||
// SPI for Max6675 or Max31855 Thermocouple
|
|||
#if DISABLED(SDSUPPORT) |
|||
#define MAX6675_SS 53 |
|||
#else |
|||
#define MAX6675_SS 49 |
|||
#endif |
|||
*/ |
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN 13 |
|||
#define HEATER_1_PIN 12 |
|||
#define HEATER_2_PIN 11 |
|||
#define HEATER_BED_PIN 7 // BED H1
|
|||
|
|||
#define FAN_PIN 9 |
|||
#define FAN1_PIN 8 |
|||
|
|||
//
|
|||
// Misc. Functions
|
|||
//
|
|||
#define SDSS 4 // 4,10,52 if using HW SPI.
|
|||
#define LED_PIN 13 |
|||
|
|||
//#define FIL_RUNOUT_PIN Y_MIN_PIN
|
|||
|
|||
//
|
|||
// LCD / Controller
|
|||
//
|
|||
#if ENABLED(ULTRA_LCD) |
|||
// RADDS LCD panel
|
|||
#if ENABLED(RADDS_DISPLAY) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) |
|||
#define LCD_PINS_RS 63 |
|||
#define LCD_PINS_ENABLE 64 |
|||
#define LCD_PINS_D4 48 |
|||
#define LCD_PINS_D5 50 |
|||
#define LCD_PINS_D6 52 |
|||
#define LCD_PINS_D7 53 |
|||
|
|||
#define BEEPER_PIN 62 |
|||
|
|||
#define BTN_EN1 44 |
|||
#define BTN_EN2 42 |
|||
#define BTN_ENC 40 |
|||
|
|||
#define SD_DETECT_PIN 51 |
|||
|
|||
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) |
|||
#define LCD_PINS_RS 52 //?
|
|||
#define LCD_PINS_ENABLE 53 //?
|
|||
#define LCD_PINS_D4 48 //?
|
|||
#define LCD_PINS_D5 50 //?
|
|||
#define LCD_PINS_D6 52 //?
|
|||
#define LCD_PINS_D7 53 //?
|
|||
|
|||
#define BEEPER_PIN 62 |
|||
|
|||
#define BTN_EN1 44 //!
|
|||
#define BTN_EN2 42 //!
|
|||
#define BTN_ENC 40 |
|||
#define SD_DETECT_PIN 51 |
|||
|
|||
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER) |
|||
|
|||
#define BTN_EN1 44 //?
|
|||
#define BTN_EN2 42 //?
|
|||
#define BTN_ENC 40 //?
|
|||
#define SD_DETECT_PIN 51 //?
|
|||
|
|||
#define BEEPER_PIN 62 //?
|
|||
#define LCD_SDSS 10 //?
|
|||
|
|||
#elif ENABLED(SPARK_FULL_GRAPHICS) //!!! - check!
|
|||
|
|||
#define LCD_PINS_D4 29 |
|||
#define LCD_PINS_ENABLE 27 |
|||
#define LCD_PINS_RS 25 |
|||
#define BTN_EN1 35 |
|||
#define BTN_EN2 33 |
|||
#define BTN_ENC 37 |
|||
|
|||
#endif // SPARK_FULL_GRAPHICS
|
|||
|
|||
#endif // ULTRA_LCD
|
Loading…
Reference in new issue