andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

LPC: Finish DMA transfer, use HW SPI class (#19191)

vanilla_fb_2.0.x
Victor Oliveira 4 years ago
committed by Scott Lahteine
parent
8393c6a63d
commit
42619a3a81
6 changed files with 61 additions and 91 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 91
      Marlin/src/HAL/LPC1768/HAL_SPI.cpp
  2. 2
      Marlin/src/HAL/LPC1768/inc/SanityCheck.h
  3. 22
      Marlin/src/HAL/LPC1768/include/SPI.h
  4. 1
      Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
  5. 17
      Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
  6. 1
      platformio.ini

91
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
View File

@ -100,72 +100,25 @@
#else
// decide which HW SPI device to use
#ifndef LPC_HW_SPI_DEV
#if (SCK_PIN == P0_07 && MISO_PIN == P0_08 && MOSI_PIN == P0_09)
#define LPC_HW_SPI_DEV 1
#else
#if (SCK_PIN == P0_15 && MISO_PIN == P0_17 && MOSI_PIN == P0_18)
#define LPC_HW_SPI_DEV 0
#else
#error "Invalid pins selected for hardware SPI"
#endif
#endif
#endif
#if LPC_HW_SPI_DEV == 0
#define LPC_SSPn LPC_SSP0
#else
#define LPC_SSPn LPC_SSP1
#endif
void spiBegin() { // setup SCK, MOSI & MISO pins for SSP0
PINSEL_CFG_Type PinCfg; // data structure to hold init values
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
PinCfg.Pinmode = 0;
PinCfg.Pinnum = LPC176x::pin_bit(SCK_PIN);
PinCfg.Portnum = LPC176x::pin_port(SCK_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(SCK_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(MISO_PIN);
PinCfg.Portnum = LPC176x::pin_port(MISO_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_INPUT(MISO_PIN);
PinCfg.Pinnum = LPC176x::pin_bit(MOSI_PIN);
PinCfg.Portnum = LPC176x::pin_port(MOSI_PIN);
PINSEL_ConfigPin(&PinCfg);
SET_OUTPUT(MOSI_PIN);
// divide PCLK by 2 for SSP0
CLKPWR_SetPCLKDiv(LPC_HW_SPI_DEV == 0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
spiInit(0);
SSP_Cmd(LPC_SSPn, ENABLE); // start SSP running
spiInit(SPI_SPEED);
}
void spiInit(uint8_t spiRate) {
// table to convert Marlin spiRates (0-5 plus default) into bit rates
uint32_t Marlin_speed[7]; // CPSR is always 2
Marlin_speed[0] = 8333333; //(SCR: 2) desired: 8,000,000 actual: 8,333,333 +4.2% SPI_FULL_SPEED
Marlin_speed[1] = 4166667; //(SCR: 5) desired: 4,000,000 actual: 4,166,667 +4.2% SPI_HALF_SPEED
Marlin_speed[2] = 2083333; //(SCR: 11) desired: 2,000,000 actual: 2,083,333 +4.2% SPI_QUARTER_SPEED
Marlin_speed[3] = 1000000; //(SCR: 24) desired: 1,000,000 actual: 1,000,000 SPI_EIGHTH_SPEED
Marlin_speed[4] = 500000; //(SCR: 49) desired: 500,000 actual: 500,000 SPI_SPEED_5
Marlin_speed[5] = 250000; //(SCR: 99) desired: 250,000 actual: 250,000 SPI_SPEED_6
Marlin_speed[6] = 125000; //(SCR:199) desired: 125,000 actual: 125,000 Default from HAL.h
// setup for SPI mode
SSP_CFG_Type HW_SPI_init; // data structure to hold init values
SSP_ConfigStructInit(&HW_SPI_init); // set values for SPI mode
HW_SPI_init.ClockRate = Marlin_speed[_MIN(spiRate, 6)]; // put in the specified bit rate
HW_SPI_init.Mode |= SSP_CR1_SSP_EN;
SSP_Init(LPC_SSPn, &HW_SPI_init); // puts the values into the proper bits in the SSP0 registers
#if MISO_PIN == BOARD_SPI1_MISO_PIN
SPI.setModule(1);
#elif MISO_PIN == BOARD_SPI2_MISO_PIN
SPI.setModule(2);
#endif
SPI.setDataSize(DATA_SIZE_8BIT);
SPI.setDataMode(SPI_MODE0);
SPI.setClock(SPISettings::spiRate2Clock(spiRate));
SPI.begin();
}
static uint8_t doio(uint8_t b) {
/* send and receive a single byte */
SSP_SendData(LPC_SSPn, b & 0x00FF);
while (SSP_GetStatus(LPC_SSPn, SSP_STAT_BUSY)); // wait for it to finish
return SSP_ReceiveData(LPC_SSPn) & 0x00FF;
return SPI.transfer(b & 0x00FF) & 0x00FF;
}
void spiSend(uint8_t b) { doio(b); }
@ -224,6 +177,9 @@ SPIClass::SPIClass(uint8_t device) {
PINSEL_CFG_Type PinCfg; // data structure to hold init values
#if BOARD_NR_SPI >= 1
_settings[0].spi_d = LPC_SSP0;
_settings[0].dataMode = SPI_MODE0;
_settings[0].dataSize = DATA_SIZE_8BIT;
_settings[0].clock = SPI_CLOCK_MAX;
// _settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
@ -246,6 +202,9 @@ SPIClass::SPIClass(uint8_t device) {
#if BOARD_NR_SPI >= 2
_settings[1].spi_d = LPC_SSP1;
_settings[1].dataMode = SPI_MODE0;
_settings[1].dataSize = DATA_SIZE_8BIT;
_settings[1].clock = SPI_CLOCK_MAX;
// _settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
PinCfg.Funcnum = 2;
PinCfg.OpenDrain = 0;
@ -320,7 +279,7 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Destination memory - Not used
GPDMACfg.DstMemAddr = 0;
// Transfer size
GPDMACfg.TransferSize = (minc ? length : 1);
GPDMACfg.TransferSize = length;
// Transfer width
GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
// Transfer type
@ -335,8 +294,9 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// Enable dma on SPI
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
// if minc=false, I'm repeating the same byte 'length' times, as I could not find yet how do GPDMA without memory increment
do {
// only increase memory if minc is true
GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
// Setup channel with given parameter
GPDMA_Setup(&GPDMACfg);
@ -344,7 +304,7 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
GPDMA_ChannelCmd(0, ENABLE);
// wait data transfer
while (!GPDMA_IntGetStatus(GPDMA_STAT_INTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_INTERR, 0)) { }
while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
// clear err and int
GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
@ -353,9 +313,6 @@ void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
// dma disable
GPDMA_ChannelCmd(0, DISABLE);
--length;
} while (!minc && length > 0);
waitSpiTxEnd(_currentSetting->spi_d);
SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
@ -382,7 +339,7 @@ void SPIClass::setBitOrder(uint8_t bitOrder) {
}
void SPIClass::setDataMode(uint8_t dataMode) {
_currentSetting->dataSize = dataMode;
_currentSetting->dataMode = dataMode;
}
void SPIClass::setDataSize(uint32_t ds) {

2
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View File

@ -24,7 +24,7 @@
#if PIO_PLATFORM_VERSION < 1001
#error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
#endif
#if PIO_FRAMEWORK_VERSION < 2002
#if PIO_FRAMEWORK_VERSION < 2005
#error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
#endif

22
Marlin/src/HAL/LPC1768/include/SPI.h
View File

@ -61,7 +61,9 @@
class SPISettings {
public:
SPISettings(uint32_t speed, int, int) : spi_speed(speed) {};
SPISettings(uint32_t spiRate, int inBitOrder, int inDataMode) {
init_AlwaysInline(spiRate2Clock(spiRate), inBitOrder, inDataMode, DATA_SIZE_8BIT);
}
SPISettings(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
if (__builtin_constant_p(inClock))
init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
@ -72,7 +74,19 @@ public:
init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT);
}
uint32_t spiRate() const { return spi_speed; }
//uint32_t spiRate() const { return spi_speed; }
static inline uint32_t spiRate2Clock(uint32_t spiRate) {
uint32_t Marlin_speed[7]; // CPSR is always 2
Marlin_speed[0] = 8333333; //(SCR: 2) desired: 8,000,000 actual: 8,333,333 +4.2% SPI_FULL_SPEED
Marlin_speed[1] = 4166667; //(SCR: 5) desired: 4,000,000 actual: 4,166,667 +4.2% SPI_HALF_SPEED
Marlin_speed[2] = 2083333; //(SCR: 11) desired: 2,000,000 actual: 2,083,333 +4.2% SPI_QUARTER_SPEED
Marlin_speed[3] = 1000000; //(SCR: 24) desired: 1,000,000 actual: 1,000,000 SPI_EIGHTH_SPEED
Marlin_speed[4] = 500000; //(SCR: 49) desired: 500,000 actual: 500,000 SPI_SPEED_5
Marlin_speed[5] = 250000; //(SCR: 99) desired: 250,000 actual: 250,000 SPI_SPEED_6
Marlin_speed[6] = 125000; //(SCR:199) desired: 125,000 actual: 125,000 Default from HAL.h
return Marlin_speed[spiRate > 6 ? 6 : spiRate];
}
private:
void init_MightInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
@ -85,7 +99,7 @@ private:
dataSize = inDataSize;
}
uint32_t spi_speed;
//uint32_t spi_speed;
uint32_t clock;
uint32_t dataSize;
//uint32_t clockDivider;
@ -122,7 +136,7 @@ public:
void end();
void beginTransaction(const SPISettings&);
void endTransaction() {};
void endTransaction() {}
// Transfer using 1 "Data Size"
uint8_t transfer(uint16_t data);

1
Marlin/src/HAL/LPC1768/tft/xpt2046.cpp
View File

@ -72,7 +72,6 @@ bool XPT2046::getRawPoint(int16_t *x, int16_t *y) {
if (!isTouched()) return false;
*x = getRawData(XPT2046_X);
*y = getRawData(XPT2046_Y);
SERIAL_ECHOLNPAIR("X: ", *x, ", Y: ", *y);
return isTouched();
}

17
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View File

@ -275,9 +275,6 @@
#define LCD_BACKLIGHT_PIN -1
#elif HAS_SPI_TFT // Config for Classic UI (emulated DOGM) and Color UI
#define SS_PIN -1
//#define ONBOARD_SD_CS_PIN -1
#define TFT_CS_PIN P1_22
#define TFT_A0_PIN P1_23
#define TFT_DC_PIN P1_23
@ -285,7 +282,6 @@
#define TFT_BACKLIGHT_PIN P1_18
#define TFT_RESET_PIN P1_19
#define LPC_HW_SPI_DEV 0
#define LCD_USE_DMA_SPI
#define TOUCH_INT_PIN P1_21
@ -297,15 +293,18 @@
#define GRAPHICAL_TFT_UPSCALE 3
#endif
// SPI 1
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
// Disable any LCD related PINs config
#define LCD_PINS_ENABLE -1
#define LCD_PINS_RS -1
// Emulated DOGM have xpt calibration values independent of display resolution
#if ENABLED(SPI_GRAPHICAL_TFT)
#define XPT2046_X_CALIBRATION -11245
#define XPT2046_Y_CALIBRATION 8629
#define XPT2046_X_OFFSET 685
#define XPT2046_Y_OFFSET -285
#endif
#else
#define BTN_ENC P0_28 // (58) open-drain

1
platformio.ini
View File

@ -623,6 +623,7 @@ debug_tool = jlink
#
[common_LPC]
platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip
platform_packages = framework-arduino-lpc176x@^0.2.5
board = nxp_lpc1768
lib_ldf_mode = off
lib_compat_mode = strict

Write Preview
Loading…
Cancel
Save