Apply shorthand option macros

5 years ago · 4078f2672e
18 changed files with 37 additions and 39 deletions
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp
@ -70,7 +70,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
      .enabled(0)
      #endif
      .tag(4) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Nozzle Offset"))
-      #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+      #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
      .enabled(1)
      #else
      .enabled(0)
@ -174,7 +174,7 @@ bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
    #endif
    case 9:  GOTO_SCREEN(InterfaceSettingsScreen);  LockScreen::check_passcode(); break;
    case 10: GOTO_SCREEN(RestoreFailsafeDialogBox); LockScreen::check_passcode(); break;
-    #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+    #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
    case 11: GOTO_SCREEN(FilamentMenu); break;
    #endif
    case 12: GOTO_SCREEN(EndstopStatesScreen); break;
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(BACKLASH_GCODE)
+#if BOTH(LULZBOT_TOUCH_UI, BACKLASH_GCODE)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(CALIBRATION_GCODE)
+#if BOTH(LULZBOT_TOUCH_UI, CALIBRATION_GCODE)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+#if BOTH(LULZBOT_TOUCH_UI, DEVELOPER_SCREENS)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+#if BOTH(LULZBOT_TOUCH_UI, DEVELOPER_SCREENS)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(FILAMENT_RUNOUT_SENSOR)
+#if BOTH(LULZBOT_TOUCH_UI, FILAMENT_RUNOUT_SENSOR)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(JUNCTION_DEVIATION)
+#if BOTH(LULZBOT_TOUCH_UI, JUNCTION_DEVIATION)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(LIN_ADVANCE)
+#if BOTH(LULZBOT_TOUCH_UI, LIN_ADVANCE)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(BABYSTEPPING)
+#if BOTH(LULZBOT_TOUCH_UI, BABYSTEPPING)

 #include "screens.h"
 #include "screen_data.h"
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp
@ -76,7 +76,7 @@ SCREEN_TABLE {
 #else
  DECL_SCREEN(JerkScreen),
 #endif
-#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+#if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
  DECL_SCREEN(FilamentMenu),
 #endif
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
@ -60,7 +60,7 @@ enum {
 #else
  JERK_SCREEN_CACHE,
 #endif
-#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+#if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
  FILAMENT_MENU_CACHE,
 #endif
 #if ENABLED(LIN_ADVANCE)
@ -490,7 +490,7 @@ class DefaultAccelerationScreen : public BaseNumericAdjustmentScreen, public Cac
  };
 #endif

-#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+#if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
  class FilamentMenu : public BaseNumericAdjustmentScreen, public CachedScreen<FILAMENT_MENU_CACHE> {
    public:
      static void onRedraw(draw_mode_t);
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(PRINTCOUNTER)
+#if BOTH(LULZBOT_TOUCH_UI, PRINTCOUNTER)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+#if BOTH(LULZBOT_TOUCH_UI, DEVELOPER_SCREENS)

 #include "screens.h"
 #include "screen_data.h"
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+#if BOTH(LULZBOT_TOUCH_UI, DEVELOPER_SCREENS)

 #include "screens.h"

--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp
@ -54,7 +54,7 @@ void TuneMenu::onRedraw(draw_mode_t what) {
    #ifdef TOUCH_UI_PORTRAIT
       .tag(2).enabled(1)      .button( BTN_POS(1,1), BTN_SIZE(2,1), F("Temperature"))
       .tag(3).enabled(!isPrinting()).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Change Filament"))
-       #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+        #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
          .enabled(1)
        #else
          .enabled(0)
@ -118,7 +118,7 @@ void TuneMenu::onRedraw(draw_mode_t what) {
        .enabled(0)
      #endif
       .tag(8).           button( BTN_POS(2,3), BTN_SIZE(1,1), F("Cancel Print"))
-       #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+        #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
          .enabled(1)
        #else
          .enabled(0)
@ -141,10 +141,8 @@ bool TuneMenu::onTouchEnd(uint8_t tag) {
    case 4:
      #if ENABLED(BABYSTEPPING)
        GOTO_SCREEN(NudgeNozzleScreen);
-      #else
-        #if HAS_BED_PROBE
-          GOTO_SCREEN(ZOffsetScreen);
-        #endif
+      #elif HAS_BED_PROBE
+        GOTO_SCREEN(ZOffsetScreen);
      #endif
      break;
    case 5:  GOTO_SCREEN(FeedratePercentScreen);     break;
@ -155,7 +153,7 @@ bool TuneMenu::onTouchEnd(uint8_t tag) {
      current_screen.forget();
      PUSH_SCREEN(StatusScreen);
      break;
-    #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+    #if EITHER(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
    case 9:  GOTO_SCREEN(FilamentMenu); break;
    #endif
    default:
--- a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp
@ -22,7 +22,7 @@

 #include "../config.h"

-#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+#if BOTH(LULZBOT_TOUCH_UI, DEVELOPER_SCREENS)

 #include "screens.h"

--- a/Marlin/src/pins/stm32/pins_FYSETC_CHEETAH.h
+++ b/Marlin/src/pins/stm32/pins_FYSETC_CHEETAH.h
@ -118,7 +118,7 @@
    //#define LCD_SCREEN_ROT_180
    //#define LCD_SCREEN_ROT_270

-    #if ENABLED(FYSETC_MINI_12864) || ENABLED(U8GLIB_ST7920)
+    #if EITHER(FYSETC_MINI_12864, U8GLIB_ST7920)
      #define FORCE_SOFT_SPI
    #endif
  #endif
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@ -82,11 +82,11 @@
 * If a UART connection is used to configure the driver, please select that as well in Configuration_adv.h.
 */
 //#define X_2208
-//#define X_SpreadCycle
+//#define X_SPREADCYCLE
 //#define Y_2208
-//#define Y_SpreadCycle
+//#define Y_SPREADCYCLE
 //#define E_2208
-//#define E_SpreadCycle
+//#define E_SPREADCYCLE


 /**
@ -788,25 +788,25 @@
 *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
 */
 #if ENABLED(X_2208)
-  #if ENABLED(X_SpreadCycle)
-    #define x_accel 1750
+  #if ENABLED(X_SPREADCYCLE)
+    #define X_ACCEL 1750
  #else
-    #define x_accel 1000
+    #define X_ACCEL 1000
  #endif
 #else
-    #define x_accel 1500
+    #define X_ACCEL 1500
 #endif

 #if ENABLED(Y_2208)
-  #if ENABLED(Y_SpreadCycle)
-    #define y_accel 500
+  #if ENABLED(Y_SPREADCYCLE)
+    #define Y_ACCEL 500
  #else
-    #define y_accel 300
+    #define Y_ACCEL 300
  #endif
 #else
-  #define y_accel 500
+  #define Y_ACCEL 500
 #endif
-#define DEFAULT_MAX_ACCELERATION      { x_accel, y_accel, 400, 4000 }
+#define DEFAULT_MAX_ACCELERATION      { X_ACCEL, Y_ACCEL, 400, 4000 }

 /**
 * Default Acceleration (change/s) change = mm/s
@ -843,12 +843,12 @@
 * value set here, it may happen instantaneously.
 */
 #if DISABLED(JUNCTION_DEVIATION)
-  #if ENABLED(X_SpreadCycle) || DISABLED(X_2208)
+  #if ENABLED(X_SPREADCYCLE) || DISABLED(X_2208)
    #define DEFAULT_XJERK 20.0
  #else
    #define DEFAULT_XJERK 10.0
  #endif
-  #if ENABLED(Y_SpreadCycle) || DISABLED(Y_2208)
+  #if ENABLED(Y_SPREADCYCLE) || DISABLED(Y_2208)
    #define DEFAULT_YJERK 10.0
  #else
    #define DEFAULT_YJERK  5.0