andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

More FTDI EVE fixes (RAMPS, Cheetah) (#17759)

vanilla_fb_2.0.x
Gustavo Alvarez 5 years ago
committed by GitHub
parent
2acdd2fadc
commit
3fd8ef52c5
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 72 additions and 39 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 2
      Marlin/Configuration_adv.h
  2. 51
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
  3. 2
      Marlin/src/pins/ramps/pins_RAMPS.h
  4. 56
      Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h

2
Marlin/Configuration_adv.h
View File

@ -1387,7 +1387,7 @@
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
//#define S6_TFT_PINMAP // FYSETC S6 pin mapping
//#define CHEETAH_TFT_PINMAP // FYSETC Cheetah pin mapping
//#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, FYSETC Cheetah and Stock boards) EXP1 pin mapping
//#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, and Stock boards) EXP1 pin mapping
//#define GENERIC_EXP2_PINMAP // GENERIC EXP2 pin mapping
//#define OTHER_PIN_LAYOUT // Define pins manually below

51
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
View File

@ -27,31 +27,13 @@
* without adding new pin definitions to the board.
*/
#ifdef CHEETAH_TFT_PINMAP
#ifndef __MARLIN_FIRMWARE__
#error "This pin mapping requires Marlin."
#endif
#define CLCD_SPI_BUS 2
#define CLCD_MOD_RESET PC9
#define CLCD_SPI_CS PB12
//#define CLCD_USE_SOFT_SPI
#if ENABLED(CLCD_USE_SOFT_SPI)
#define CLCD_SOFT_SPI_MOSI PB15
#define CLCD_SOFT_SPI_MISO PB14
#define CLCD_SOFT_SPI_SCLK PB13
#endif
#endif
#ifdef S6_TFT_PINMAP
#ifndef __MARLIN_FIRMWARE__
#error "This pin mapping requires Marlin."
#endif
#define CLCD_SPI_CS PC7
#define CLCD_MOD_RESET PC6
#define CLCD_SPI_CS PC7
#define CLCD_MOD_RESET PC6
#endif
#ifdef CR10_TFT_PINMAP
@ -60,13 +42,13 @@
#endif
#define CLCD_USE_SOFT_SPI
#define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6
#define CLCD_SOFT_SPI_MOSI LCD_PINS_ENABLE // PORTC1 Pin 8
#define CLCD_SPI_CS LCD_PINS_RS // PORTA3 Pin 7
#define CLCD_SOFT_SPI_MISO 16 // PORTC0 BTN_ENC Pin 2
#define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3
#define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5
#define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1
#define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6
#define CLCD_SOFT_SPI_MOSI LCD_PINS_ENABLE // PORTC1 Pin 8
#define CLCD_SPI_CS LCD_PINS_RS // PORTA3 Pin 7
#define CLCD_SOFT_SPI_MISO 16 // PORTC0 BTN_ENC Pin 2
#define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3
#define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5
#define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1
#endif
/**
@ -181,3 +163,18 @@
#define CLCD_MOD_RESET BTN_EN1
#define CLCD_SPI_CS LCD_PINS_RS
#endif
#ifdef CHEETAH_TFT_PINMAP
#ifndef __MARLIN_FIRMWARE__
#error "This pin mapping requires Marlin."
#endif
#define CLCD_MOD_RESET BTN_EN2
#define CLCD_SPI_CS LCD_PINS_RS
#if ENABLED(CLCD_USE_SOFT_SPI)
#define CLCD_SOFT_SPI_MOSI LCD_PINS_ENABLE
#define CLCD_SOFT_SPI_MISO LCD_PINS_RS
#define CLCD_SOFT_SPI_SCLK LCD_PINS_D4
#endif
#endif

2
Marlin/src/pins/ramps/pins_RAMPS.h
View File

@ -753,6 +753,8 @@
* EXP2-1 ----------- EXP1-2
* EXP1-10 ----------- EXP1-1
*
* NOTE: The MISO pin should not get a 5V signal.
* To fix, insert a 1N4148 diode in the MISO line.
*/
#define BEEPER_PIN 37

56
Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h
View File

@ -107,15 +107,35 @@
//
// LCD Pins
//
/**
* _____
* 5V | 1 2 | GND
* (MOSI) PB15 | 3 4 | PB12 (LCD_EN)
* (SCK) PB13 | 5 6 PC11 (BTN_EN1)
* (LCD_RS) PB14 | 7 8 | PC10 (BTN_EN2)
* (BTN_ENC) PC12 | 9 10| PC9 (BEEPER)
* -----
* EXP1
*/
#define EXPA1_03_PIN PB15
#define EXPA1_04_PIN PB12
#define EXPA1_05_PIN PB13
#define EXPA1_06_PIN PC11
#define EXPA1_07_PIN PB14
#define EXPA1_08_PIN PC10
#define EXPA1_09_PIN PC12
#define EXPA1_10_PIN PC9
#if HAS_SPI_LCD
#define BEEPER_PIN PC9
#define BEEPER_PIN EXPA1_10_PIN
#if HAS_GRAPHICAL_LCD
#define DOGLCD_A0 PB14
#define DOGLCD_CS PB12
#define DOGLCD_SCK PB13
#define DOGLCD_MOSI PB15
#define DOGLCD_A0 EXPA1_07_PIN
#define DOGLCD_CS EXPA1_04_PIN
#define DOGLCD_SCK EXPA1_05_PIN
#define DOGLCD_MOSI EXPA1_03_PIN
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
@ -125,9 +145,9 @@
#endif
#endif
#define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD
#define LCD_PINS_D4 PB13 // SCLK
#define LCD_PINS_ENABLE PB15 // DATA MOSI
#define LCD_PINS_RS EXPA1_04_PIN // CS -- SOFT SPI for ENDER3 LCD
#define LCD_PINS_D4 EXPA1_05_PIN // SCLK
#define LCD_PINS_ENABLE EXPA1_03_PIN // DATA MOSI
// not connected to a pin
#define SD_DETECT_PIN PC3
@ -145,9 +165,23 @@
//#define LCD_CONTRAST_INIT 190
#if ENABLED(NEWPANEL)
#define BTN_EN1 PC11
#define BTN_EN2 PC10
#define BTN_ENC PC12
#define BTN_EN1 EXPA1_06_PIN
#define BTN_EN2 EXPA1_08_PIN
#define BTN_ENC EXPA1_09_PIN
#endif
#endif
#if ENABLED(TOUCH_UI_FTDI_EVE)
#define BEEPER_PIN EXPA1_10_PIN
#define BTN_EN2 EXPA1_08_PIN
#define CLCD_SPI_BUS 2
//#define CLCD_USE_SOFT_SPI
#if ENABLED(CLCD_USE_SOFT_SPI)
#define LCD_PINS_RS EXPA1_04_PIN
#define LCD_PINS_D4 EXPA1_07_PIN
#define LCD_PINS_ENABLE EXPA1_05_PIN
#endif
#endif

Write Preview
Loading…
Cancel
Save