andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

🎨 Laser Ammeter followup (#22079) 

Followup to #21835
vanilla_fb_2.0.x
Scott Lahteine 4 years ago
committed by Scott Lahteine
parent
2fd9971f41
commit
3f103c91f0
13 changed files with 90 additions and 116 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 21
      Marlin/Configuration_adv.h
  2. 33
      Marlin/src/feature/ammeter.cpp
  3. 5
      Marlin/src/feature/ammeter.h
  4. 1
      Marlin/src/feature/spindle_laser.cpp
  5. 4
      Marlin/src/inc/Conditionals_LCD.h
  6. 31
      Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
  7. 26
      Marlin/src/lcd/dogm/dogm_Statusscreen.h
  8. 11
      Marlin/src/lcd/dogm/status/ammeter.h
  9. 2
      Marlin/src/lcd/dogm/status_screen_DOGM.cpp
  10. 9
      Marlin/src/libs/numtostr.cpp
  11. 3
      Marlin/src/libs/numtostr.h
  12. 2
      buildroot/tests/mega2560

21
Marlin/Configuration_adv.h
View File

@ -3283,15 +3283,6 @@
//#define AIR_ASSIST_PIN 44 // Override the default Air Assist pin
#endif
//
// Laser I2C Ammeter (High precision INA226 low/high side module)
//
//#define I2C_AMMETER
#if ENABLED(I2C_AMMETER)
#define I2C_AMMETER_IMAX .1 // Calibration value for the expected current range in Amps (use float e.g. 1.0)
#define I2C_AMMETER_SHUNT_RESISTOR .1 // Calibration shunt resistor value in ohms
#endif
//#define SPINDLE_SERVO // A servo converting an angle to spindle power
#ifdef SPINDLE_SERVO
#define SPINDLE_SERVO_NR 0 // Index of servo used for spindle control
@ -3424,8 +3415,18 @@
#define SPINDLE_LASER_POWERDOWN_DELAY 50 // (ms) Delay to allow the spindle to stop
#endif
//
// Laser I2C Ammeter (High precision INA226 low/high side module)
//
//#define I2C_AMMETER
#if ENABLED(I2C_AMMETER)
#define I2C_AMMETER_IMAX 0.1 // (Amps) Calibration value for the expected current range
#define I2C_AMMETER_SHUNT_RESISTOR 0.1 // (Ohms) Calibration shunt resistor value
#endif
#endif
#endif
#endif // SPINDLE_FEATURE || LASER_FEATURE
/**
* Synchronous Laser Control with M106/M107

33
Marlin/src/feature/ammeter.cpp
View File

@ -1,4 +1,4 @@
/**
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
@ -23,27 +23,32 @@
#include "../inc/MarlinConfig.h"
#if ENABLED(I2C_AMMETER)
#include "ammeter.h"
INA226 ina;
#include "ammeter.h"
Ammeter ammeter;
#ifndef I2C_AMMETER_IMAX
#define I2C_AMMETER_IMAX 0.500 // Calibration range 500 Milliamps
#endif
float Ammeter::scale;
float Ammeter::current;
INA226 ina;
void Ammeter::init() {
Ammeter ammeter;
float Ammeter::scale;
float Ammeter::current;
void Ammeter::init() {
ina.begin();
ina.configure(INA226_AVERAGES_16, INA226_BUS_CONV_TIME_1100US, INA226_SHUNT_CONV_TIME_1100US, INA226_MODE_SHUNT_BUS_CONT);
ina.calibrate(I2C_AMMETER_SHUNT_RESISTOR,I2C_AMMETER_IMAX);
}
ina.calibrate(I2C_AMMETER_SHUNT_RESISTOR, I2C_AMMETER_IMAX);
}
float Ammeter::read() {
float Ammeter::read() {
scale = 1;
current = ina.readShuntCurrent();
if (current <= .0001) current = 0; // Cleanup lsb bit amplification errors
if (current < .1) scale = 1000;
if (current <= 0.0001f) current = 0; // Clean up least-significant-bit amplification errors
if (current < 0.1f) scale = 1000;
return current * scale;
}
}
#endif //I2C_AMMETER
#endif // I2C_AMMETER

5
Marlin/src/feature/ammeter.h
View File

@ -26,10 +26,6 @@
#include <Wire.h>
#include <INA226.h>
#ifndef I2C_AMMETER_IMAX
#define I2C_AMMETER_IMAX .500 // Calibration range 500 Milli Amps
#endif
class Ammeter {
private:
static float scale;
@ -38,7 +34,6 @@ public:
static float current;
static void init();
static float read();
};
extern Ammeter ammeter;

1
Marlin/src/feature/spindle_laser.cpp
View File

@ -81,7 +81,6 @@ void SpindleLaser::init() {
#if ENABLED(I2C_AMMETER)
ammeter.init(); // Init I2C Ammeter
#endif
}
#if ENABLED(SPINDLE_LASER_PWM)

4
Marlin/src/inc/Conditionals_LCD.h
View File

@ -405,6 +405,10 @@
#endif
#if EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) && DISABLED(NO_LCD_DETECT)
#define DETECT_I2C_LCD_DEVICE 1
#endif
#ifndef STD_ENCODER_PULSES_PER_STEP
#if ENABLED(TOUCH_SCREEN)
#define STD_ENCODER_PULSES_PER_STEP 2

31
Marlin/src/lcd/HD44780/marlinui_HD44780.cpp
View File

@ -68,11 +68,7 @@
#elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008)
LCD_CLASS lcd(LCD_I2C_ADDRESS
#ifdef DETECT_DEVICE
, 1
#endif
);
LCD_CLASS lcd(LCD_I2C_ADDRESS OPTARG(DETECT_I2C_LCD_DEVICE, 1));
#elif ENABLED(LCD_I2C_TYPE_PCA8574)
@ -380,11 +376,7 @@ void MarlinUI::init_lcd() {
}
bool MarlinUI::detected() {
return (true
#if EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) && defined(DETECT_DEVICE)
&& lcd.LcdDetected() == 1
#endif
);
return TERN1(DETECT_I2C_LCD_DEVICE, lcd.LcdDetected() == 1);
}
#if HAS_SLOW_BUTTONS
@ -602,10 +594,11 @@ FORCE_INLINE void _draw_cooler_status(const char prefix, const bool blink) {
FORCE_INLINE void _draw_ammeter_status() {
lcd_put_u8str(" ");
ammeter.read();
if (ammeter.current <= .999) {
lcd_put_u8str(ftostr3ns(ammeter.current));
if (ammeter.current <= 0.999f) {
lcd_put_u8str(ui16tostr3rj(uint16_t(ammeter.current * 1000 + 0.5f)));
lcd_put_u8str("mA");
} else {
}
else {
lcd_put_u8str(ftostr12ns(ammeter.current));
lcd_put_wchar('A');
}
@ -847,15 +840,9 @@ void MarlinUI::draw_status_screen() {
#endif
#endif
#if HAS_COOLER
_draw_cooler_status('*', blink);
#endif
#if ENABLED(LASER_COOLANT_FLOW_METER)
_draw_flowmeter_status();
#endif
#if ENABLED(I2C_AMMETER)
_draw_ammeter_status();
#endif
TERN_(HAS_COOLER, _draw_cooler_status('*', blink));
TERN_(LASER_COOLANT_FLOW_METER, _draw_flowmeter_status());
TERN_(I2C_AMMETER, _draw_ammeter_status());
#endif // LCD_WIDTH >= 20

26
Marlin/src/lcd/dogm/dogm_Statusscreen.h
View File

@ -110,14 +110,13 @@
//
// Laser Ammeter
//
#if !STATUS_AMMETER_WIDTH && ENABLED(I2C_AMMETER)
#if ENABLED(I2C_AMMETER)
#if !STATUS_AMMETER_WIDTH
#include "status/ammeter.h"
#endif
#ifndef STATUS_AMMETER_WIDTH
#endif
#ifndef STATUS_AMMETER_WIDTH
#define STATUS_AMMETER_WIDTH 0
#endif
#ifndef STATUS_AMMETER_BYTEWIDTH
#define STATUS_AMMETER_BYTEWIDTH BW(STATUS_AMMETER_WIDTH)
#endif
#endif
//
@ -614,30 +613,29 @@
#endif
#endif
#if ENABLED(I2C_AMMETER)
#if STATUS_AMMETER_WIDTH
//
// I2C Laser Ammeter
//
#if ENABLED(I2C_AMMETER) && STATUS_AMMETER_WIDTH
#ifndef STATUS_AMMETER_BYTEWIDTH
#define STATUS_AMMETER_BYTEWIDTH BW(STATUS_AMMETER_WIDTH)
#endif
#ifndef STATUS_AMMETER_X
#define STATUS_AMMETER_X (LCD_PIXEL_WIDTH - (STATUS_AMMETER_BYTEWIDTH + STATUS_FLOWMETER_BYTEWIDTH + STATUS_FAN_BYTEWIDTH + STATUS_CUTTER_BYTEWIDTH + STATUS_COOLER_BYTEWIDTH) * 8)
#endif
#ifndef STATUS_AMMETER_HEIGHT
#define STATUS_AMMETER_HEIGHT(S) (sizeof(status_ammeter_bmp1) / (STATUS_AMMETER_BYTEWIDTH))
#endif
#ifndef STATUS_AMMETER_Y
#define STATUS_AMMETER_Y(S) (18 - STATUS_AMMETER_HEIGHT(S))
#endif
#ifndef STATUS_AMMETER_TEXT_X
#define STATUS_AMMETER_TEXT_X (STATUS_AMMETER_X + 7)
#endif
static_assert(
sizeof(status_ammeter_bmp1) == (STATUS_AMMETER_BYTEWIDTH) * STATUS_AMMETER_HEIGHT(0),
"Status ammeter bitmap (status_ammeter_bmp1) dimensions don't match data."
);
#endif
#endif
//

11
Marlin/src/lcd/dogm/status/ammeter.h
View File

@ -1,6 +1,6 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@ -24,11 +24,10 @@
//
// lcd/dogm/status/ammeter.h - Status Screen Laser Ammeter bitmaps
//
#if ENABLED(I2C_AMMETER)
#define STATUS_AMMETER_WIDTH 20
#define STATUS_AMMETER_WIDTH 20
const unsigned char status_ammeter_bmp_mA[] PROGMEM = {
const unsigned char status_ammeter_bmp_mA[] PROGMEM = {
B00000000,B11111100,B00000000,
B00000011,B00000011,B00000000,
B00000100,B00000000,B10000000,
@ -46,7 +45,7 @@
B00000100,B00000000,B10000000,
B00000011,B00000011,B00000000,
B00000000,B11111100,B00000000
};
};
const unsigned char status_ammeter_bmp_A[] PROGMEM = {
B00000000,B11111100,B00000000,
@ -67,5 +66,3 @@ const unsigned char status_ammeter_bmp_A[] PROGMEM = {
B00000011,B00000011,B00000000,
B00000000,B11111100,B00000000,
};
#endif

2
Marlin/src/lcd/dogm/status_screen_DOGM.cpp
View File

@ -697,7 +697,7 @@ void MarlinUI::draw_status_screen() {
const uint8_t ammetery = STATUS_AMMETER_Y(status_ammeter_bmp_mA),
ammeterh = STATUS_AMMETER_HEIGHT(status_ammeter_bmp_mA);
if (PAGE_CONTAINS(ammetery, ammetery + ammeterh - 1))
u8g.drawBitmapP(STATUS_AMMETER_X, ammetery, STATUS_AMMETER_BYTEWIDTH, ammeterh, (ammeter.current < .1) ? status_ammeter_bmp_mA : status_ammeter_bmp_A);
u8g.drawBitmapP(STATUS_AMMETER_X, ammetery, STATUS_AMMETER_BYTEWIDTH, ammeterh, (ammeter.current < 0.1f) ? status_ammeter_bmp_mA : status_ammeter_bmp_A);
#endif
// Heated Bed

9
Marlin/src/libs/numtostr.cpp
View File

@ -217,15 +217,6 @@ const char* ftostr41ns(const_float_t f) {
return &conv[2];
}
// Convert unsigned float to string with 123 format
const char* ftostr3ns(const_float_t f) {
const long i = UINTFLOAT(f, 3);
conv[4] = DIGIMOD(i, 100);
conv[5] = DIGIMOD(i, 10);
conv[6] = DIGIMOD(i, 1);
return &conv[4];
}
// Convert signed float to fixed-length string with 12.34 / _2.34 / -2.34 or -23.45 / 123.45 format
const char* ftostr42_52(const_float_t f) {
if (f <= -10 || f >= 100) return ftostr52(f); // -23.45 / 123.45

3
Marlin/src/libs/numtostr.h
View File

@ -74,9 +74,6 @@ const char* ftostr31ns(const_float_t x);
// Convert unsigned float to string with 123.4 format
const char* ftostr41ns(const_float_t x);
// Convert unsigned float to string with 123 format
const char* ftostr3ns(const_float_t x);
// Convert signed float to fixed-length string with 12.34 / _2.34 / -2.34 or -23.45 / 123.45 format
const char* ftostr42_52(const_float_t x);

2
buildroot/tests/mega2560
View File

@ -193,7 +193,7 @@ opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 0 LCD_LANGUAGE en TEMP_SENSOR_C
MANUAL_FEEDRATE '{ 50*60, 50*60, 4*60 }' \
AXIS_RELATIVE_MODES '{ false, false, false }'
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOOT_SILENT EEPROM_AUTO_INIT \
LASER_FEATURE AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_COOLANT_FLOW_METER
LASER_FEATURE AIR_EVACUATION AIR_EVACUATION_PIN AIR_ASSIST AIR_ASSIST_PIN LASER_COOLANT_FLOW_METER I2C_AMMETER
exec_test $1 $2 "REPRAP MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Flowmeter | 44780 LCD " "$3"

Write Preview
Loading…
Cancel
Save