🎨 abs => ABS

Marlin/src/feature/probe_temp_comp.cpp

@@ -143,13 +143,13 @@ bool ProbeTempComp::finish_calibration(const TempSensorID tsi) {
   // Sanity check
   for (calib_idx = 0; calib_idx < measurements; ++calib_idx) {
     // Restrict the max. offset
-    if (abs(data[calib_idx]) > 2000) {
+    if (ABS(data[calib_idx]) > 2000) {
       SERIAL_ECHOLNPGM("!Invalid Z-offset detected (0-2).");
       clear_offsets(tsi);
       return false;
     }
     // Restrict the max. offset difference between two probings
-    if (calib_idx > 0 && abs(data[calib_idx - 1] - data[calib_idx]) > 800) {
+    if (calib_idx > 0 && ABS(data[calib_idx - 1] - data[calib_idx]) > 800) {
       SERIAL_ECHOLNPGM("!Invalid Z-offset between two probings detected (0-0.8).");
       clear_offsets(TSI_PROBE);
       return false;

Marlin/src/gcode/bedlevel/G35.cpp

@@ -130,7 +130,7 @@ void GcodeSuite::G35() {
     // Calculate adjusts
     LOOP_S_L_N(i, 1, G35_PROBE_COUNT) {
       const float diff = z_measured[0] - z_measured[i],
-                  adjust = abs(diff) < 0.001f ? 0 : diff / threads_factor[(screw_thread - 30) / 10];
+                  adjust = ABS(diff) < 0.001f ? 0 : diff / threads_factor[(screw_thread - 30) / 10];
 
       const int full_turns = trunc(adjust);
       const float decimal_part = adjust - float(full_turns);
@@ -138,8 +138,8 @@ void GcodeSuite::G35() {
 
       SERIAL_ECHOPGM("Turn ");
       SERIAL_ECHOPGM_P((char *)pgm_read_ptr(&tramming_point_name[i]));
-      SERIAL_ECHOPAIR(" ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", abs(full_turns), " turns");
+      SERIAL_ECHOPAIR(" ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", ABS(full_turns), " turns");
-      if (minutes) SERIAL_ECHOPAIR(" and ", abs(minutes), " minutes");
+      if (minutes) SERIAL_ECHOPAIR(" and ", ABS(minutes), " minutes");
       if (ENABLED(REPORT_TRAMMING_MM)) SERIAL_ECHOPAIR(" (", -diff, "mm)");
       SERIAL_EOL();
     }

Marlin/src/lcd/dwin/e3v2/rotary_encoder.cpp

@@ -121,7 +121,7 @@ ENCODER_DiffState Encoder_ReceiveAnalyze() {
     lastEncoderBits = newbutton;
   }
 
-  if (abs(temp_diff) >= ENCODER_PULSES_PER_STEP) {
+  if (ABS(temp_diff) >= ENCODER_PULSES_PER_STEP) {
     if (temp_diff > 0) temp_diffState = ENCODER_DIFF_CW;
     else temp_diffState = ENCODER_DIFF_CCW;
 

Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp

@@ -624,25 +624,25 @@ void DGUSScreenHandler::ManualAssistLeveling(DGUS_VP_Variable &var, void *val_pt
 
   switch (point_value) {
     case 0x0001:
-      enqueue_corner_move(X_MIN_POS + abs(mks_corner_offsets[0].x),
+      enqueue_corner_move(X_MIN_POS + ABS(mks_corner_offsets[0].x),
-                          Y_MIN_POS + abs(mks_corner_offsets[0].y), level_speed);
+                          Y_MIN_POS + ABS(mks_corner_offsets[0].y), level_speed);
       queue.enqueue_now_P(PSTR("G28Z"));
       break;
     case 0x0002:
-      enqueue_corner_move(X_MAX_POS - abs(mks_corner_offsets[1].x),
+      enqueue_corner_move(X_MAX_POS - ABS(mks_corner_offsets[1].x),
-                          Y_MIN_POS + abs(mks_corner_offsets[1].y), level_speed);
+                          Y_MIN_POS + ABS(mks_corner_offsets[1].y), level_speed);
       break;
     case 0x0003:
-      enqueue_corner_move(X_MAX_POS - abs(mks_corner_offsets[2].x),
+      enqueue_corner_move(X_MAX_POS - ABS(mks_corner_offsets[2].x),
-                          Y_MAX_POS - abs(mks_corner_offsets[2].y), level_speed);
+                          Y_MAX_POS - ABS(mks_corner_offsets[2].y), level_speed);
       break;
     case 0x0004:
-      enqueue_corner_move(X_MIN_POS + abs(mks_corner_offsets[3].x),
+      enqueue_corner_move(X_MIN_POS + ABS(mks_corner_offsets[3].x),
-                          Y_MAX_POS - abs(mks_corner_offsets[3].y), level_speed);
+                          Y_MAX_POS - ABS(mks_corner_offsets[3].y), level_speed);
       break;
     case 0x0005:
-      enqueue_corner_move(abs(mks_corner_offsets[4].x),
+      enqueue_corner_move(ABS(mks_corner_offsets[4].x),
-                          abs(mks_corner_offsets[4].y), level_speed);
+                          ABS(mks_corner_offsets[4].y), level_speed);
       break;
   }
 

Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/move_axis_screen.cpp

@@ -121,7 +121,7 @@ float BaseMoveAxisScreen::getManualFeedrate(uint8_t axis, float increment_mm) {
   // being held down, this allows enough margin for the planner to
   // connect segments and even out the motion.
   constexpr xyze_feedrate_t max_manual_feedrate = MANUAL_FEEDRATE;
-  return min(max_manual_feedrate[axis] / 60.0f, abs(increment_mm * (TOUCH_REPEATS_PER_SECOND) * 0.80f));
+  return min(max_manual_feedrate[axis] / 60.0f, ABS(increment_mm * (TOUCH_REPEATS_PER_SECOND) * 0.80f));
 }
 
 void BaseMoveAxisScreen::setManualFeedrate(ExtUI::axis_t axis, float increment_mm) {

Marlin/src/lcd/extui/mks_ui/draw_baby_stepping.cpp

@@ -93,9 +93,9 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
       has_adjust_z = 1;
       break;
     case ID_BABY_STEP_DIST:
-      if (abs((int)(100 * babystep_dist)) == 1)
+      if (ABS((int)(100 * babystep_dist)) == 1)
         babystep_dist = 0.05;
-      else if (abs((int)(100 * babystep_dist)) == 5)
+      else if (ABS((int)(100 * babystep_dist)) == 5)
         babystep_dist = 0.1;
       else
         babystep_dist = 0.01;

Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp

@@ -519,7 +519,7 @@ void filament_dialog_handle() {
 
   if (uiCfg.filament_load_heat_flg) {
     const celsius_t diff = thermalManager.wholeDegHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
-    if (abs(diff) < 2 || diff > 0) {
+    if (ABS(diff) < 2 || diff > 0) {
       uiCfg.filament_load_heat_flg = false;
       lv_clear_dialog();
       lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED);
@@ -535,7 +535,7 @@ void filament_dialog_handle() {
 
   if (uiCfg.filament_unload_heat_flg) {
     const celsius_t diff = thermalManager.wholeDegHotend(uiCfg.extruderIndex) - gCfgItems.filament_limit_temp;
-    if (abs(diff) < 2 || diff > 0) {
+    if (ABS(diff) < 2 || diff > 0) {
       uiCfg.filament_unload_heat_flg = false;
       lv_clear_dialog();
       lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_UNLOAD_COMPLETED);

Marlin/src/lcd/extui/mks_ui/draw_extrusion.cpp

@@ -89,7 +89,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
       disp_extru_amount();
       break;
     case ID_E_STEP:
-      switch (abs(uiCfg.extruStep)) {
+      switch (ABS(uiCfg.extruStep)) {
         case  1: uiCfg.extruStep = 5; break;
         case  5: uiCfg.extruStep = 10; break;
         case 10: uiCfg.extruStep = 1; break;

Marlin/src/lcd/extui/mks_ui/draw_filament_change.cpp

@@ -50,7 +50,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
   switch (obj->mks_obj_id) {
     case ID_FILAMNT_IN:
       uiCfg.filament_load_heat_flg = true;
-      if (abs(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
+      if (ABS(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
           || gCfgItems.filament_limit_temp <= thermalManager.wholeDegHotend(uiCfg.extruderIndex)) {
         lv_clear_filament_change();
         lv_draw_dialog(DIALOG_TYPE_FILAMENT_HEAT_LOAD_COMPLETED);
@@ -67,7 +67,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
     case ID_FILAMNT_OUT:
       uiCfg.filament_unload_heat_flg = true;
       if (thermalManager.degTargetHotend(uiCfg.extruderIndex)
-          && (abs(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
+          && (ABS(thermalManager.degTargetHotend(uiCfg.extruderIndex) - thermalManager.wholeDegHotend(uiCfg.extruderIndex)) <= 1
               || thermalManager.wholeDegHotend(uiCfg.extruderIndex) >= gCfgItems.filament_limit_temp)
       ) {
         lv_clear_filament_change();

Marlin/src/lcd/extui/mks_ui/draw_move_motor.cpp

@@ -75,7 +75,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
 
   switch (obj->mks_obj_id) {
     case ID_M_STEP:
-      if (abs(10 * (int)uiCfg.move_dist) == 100)
+      if (ABS(10 * (int)uiCfg.move_dist) == 100)
         uiCfg.move_dist = 0.1;
       else
         uiCfg.move_dist *= 10.0f;

Marlin/src/lcd/menu/menu_bed_corners.cpp

@@ -87,7 +87,7 @@ constexpr int lco[] = LEVEL_CORNERS_LEVELING_ORDER;
 constexpr bool level_corners_3_points = COUNT(lco) == 2;
 static_assert(level_corners_3_points || COUNT(lco) == 4, "LEVEL_CORNERS_LEVELING_ORDER must have exactly 2 or 4 corners.");
 
-constexpr int lcodiff = abs(lco[0] - lco[1]);
+constexpr int lcodiff = ABS(lco[0] - lco[1]);
 static_assert(COUNT(lco) == 4 || lcodiff == 1 || lcodiff == 3, "The first two LEVEL_CORNERS_LEVELING_ORDER corners must be on the same edge.");
 
 constexpr int nr_edge_points = level_corners_3_points ? 3 : 4;