Fix configuration issue

Marlin/Configuration.h

@@ -1064,7 +1064,7 @@
 #define XY_PROBE_FEEDRATE (1000)
 
 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_FEEDRATE_FAST HOMING_FEEDRATE_Z
+#define Z_PROBE_FEEDRATE_FAST (4*60)
 
 // Feedrate (mm/min) for the "accurate" probe of each point
 #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)

Marlin/Configuration_adv.h

@@ -1320,7 +1320,7 @@
     #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
     //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
-    //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
+    //#define POWER_LOSS_PIN         PLR_PIN // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
     //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
     //#define POWER_LOSS_PULLUP         // Set pullup / pulldown as appropriate for your sensor
     //#define POWER_LOSS_PULLDOWN

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h

@@ -141,8 +141,11 @@ BlTouch
 /*
 Управление питанием
 */
-#define SUICIDE_PIN                       PE5   
-#define SUICIDE_PIN_INVERTING             false
+//#define SUICIDE_PIN                       PE5   
+//#define SUICIDE_PIN_INVERTING             false
+//#define PLR_PIN                           PA2   // PW_DET
+//#define KILL_PIN                          PA2   // Enable MKSPWC DET PIN
+//#define KILL_PIN_STATE                    true  // Enable MKSPWC PIN STATE
 
 
 //

Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h

@@ -211,8 +211,8 @@ https://easyeda.com/sst78rust/fb4s-led-control
 */
 //#define SUICIDE_PIN                       PB2   
 //#define SUICIDE_PIN_INVERTING             false
-#define KILL_PIN                          PA2   // Enable MKSPWC DET PIN
-#define KILL_PIN_STATE                    true  // Enable MKSPWC PIN STATE
+//#define KILL_PIN                          PA2   // Enable MKSPWC DET PIN
+//#define KILL_PIN_STATE                    true  // Enable MKSPWC PIN STATE
 
 //
 // Thermocouples