Velleman Vertex Delta pins (#13072)

Marlin/src/pins/pins.h

@@ -94,6 +94,8 @@
   #include "pins_K8200.h"             // ATmega1280, ATmega2560                     env:megaatmega1280 env:megaatmega2560 (3DRAG)
 #elif MB(K8400)
   #include "pins_K8400.h"             // ATmega1280, ATmega2560                     env:megaatmega1280 env:megaatmega2560 (3DRAG)
+#elif MB(K8800)
+  #include "pins_K8800.h"             // ATmega1280, ATmega2560                     env:megaatmega1280 env:megaatmega2560 (3DRAG)
 #elif MB(BAM_DICE)
   #include "pins_RAMPS.h"             // ATmega1280, ATmega2560                     env:megaatmega1280 env:megaatmega2560
 #elif MB(BAM_DICE_DUE)

Marlin/src/pins/pins_K8800.h

@@ -0,0 +1,108 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Velleman K8800 (Vertex)
+ */
+
+#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define DEFAULT_MACHINE_NAME "Vertex Delta"
+#define BOARD_NAME           "K8800"
+
+//#define LCD_SCREEN_ROT_180
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN          3
+#define Y_STOP_PIN         14
+#define Z_MIN_PIN          68  // Used for bed leveling
+#define Z_MAX_PIN          66
+
+//
+// Steppers
+//
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       63
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+
+#define E1_STEP_PIN        32
+#define E1_DIR_PIN         34
+#define E1_ENABLE_PIN      30
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         13
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       10
+#define FAN_PIN             8
+#define CONTROLLER_FAN_PIN  9
+
+//
+// Misc. Functions
+//
+#define SDSS               25
+
+#define FIL_RUNOUT_PIN     69   // PK7
+#define KILL_PIN           20   // PD1
+
+//
+// LCD / Controller
+//
+#define SD_DETECT_PIN      21   // PD0
+#define LCD_SDSS           53
+#define BEEPER_PIN          6
+
+#define DOGLCD_CS          29
+#define DOGLCD_A0          27
+
+#define LCD_PINS_RS        27
+#define LCD_PINS_ENABLE    29
+#define LCD_PINS_D4        37
+#define LCD_PINS_D5        35
+#define LCD_PINS_D6        33
+#define LCD_PINS_D7        31
+
+#if ENABLED(NEWPANEL)
+  #define BTN_EN1          17
+  #define BTN_EN2          16
+  #define BTN_ENC          23
+#endif