andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Fixes for FYSETC Touch EVE 5" on AVR (#17659) 

Co-Authored-By: RudolphRiedel <rudolphriedel@users.noreply.github.com>
Co-authored-by: sL1pKn07 <sl1pkn07@gmail.com>
vanilla_fb_2.0.x
Scott Lahteine 5 years ago
committed by GitHub
parent
d7f90c36df
commit
3a27933ae7
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
12 changed files with 294 additions and 111 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 10
      Marlin/Configuration_adv.h
  2. 2
      Marlin/src/inc/Conditionals_LCD.h
  3. 96
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
  4. 34
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
  5. 12
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
  6. 4
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
  7. 9
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
  8. 2
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp
  9. 4
      Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp
  10. 44
      Marlin/src/pins/ramps/pins_RAMPS.h
  11. 99
      Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
  12. 89
      Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h

10
Marlin/Configuration_adv.h
View File

@ -1375,10 +1375,12 @@
//#define TOUCH_UI_800x480 //#define TOUCH_UI_800x480
// Mappings for boards with a standard RepRapDiscount Display connector // Mappings for boards with a standard RepRapDiscount Display connector
//#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
//#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
//#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
//#define S6_TFT_PINMAP // FYSETC S6 pin mapping //#define S6_TFT_PINMAP // FYSETC S6 pin mapping
//#define E3_EXP1_PINMAP // E3 type boards (SKR E3/DIP, FYSETC Cheetah and Stock boards) EXP1 pin mapping
//#define GENERIC_EXP2_PINMAP // GENERIC EXP2 pin mapping
//#define OTHER_PIN_LAYOUT // Define pins manually below //#define OTHER_PIN_LAYOUT // Define pins manually below
#if ENABLED(OTHER_PIN_LAYOUT) #if ENABLED(OTHER_PIN_LAYOUT)

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -361,7 +361,7 @@
#define HAS_DGUS_LCD 1 #define HAS_DGUS_LCD 1
#endif #endif
// Extensible UI serial touch screens. (See src/lcd/extensible_ui) // Extensible UI serial touch screens. (See src/lcd/extui)
#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE) #if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE)
#define IS_EXTUI #define IS_EXTUI
#define EXTENSIBLE_UI #define EXTENSIBLE_UI

96
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/commands.cpp
View File

@ -58,7 +58,7 @@ void CLCD::FontMetrics::load(const uint8_t font) {
uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const { uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const {
uint16_t width = 0; uint16_t width = 0;
const uint8_t *p = (const uint8_t *) str; const uint8_t *p = (const uint8_t *) str;
for(;;) { for (;;) {
const uint8_t val = *p++; n--; const uint8_t val = *p++; n--;
if (!val || n == 0) break; if (!val || n == 0) break;
width += val < 128 ? char_widths[val] : 0; width += val < 128 ? char_widths[val] : 0;
@ -69,7 +69,7 @@ uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const {
uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const { uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
uint16_t width = 0; uint16_t width = 0;
const uint8_t *p = (const uint8_t *) str; const uint8_t *p = (const uint8_t *) str;
for(;;) { for (;;) {
const uint8_t val = pgm_read_byte(p++); n--; const uint8_t val = pgm_read_byte(p++); n--;
if (!val || n == 0) break; if (!val || n == 0) break;
width += val < 128 ? char_widths[val] : 0; width += val < 128 ? char_widths[val] : 0;
@ -79,7 +79,7 @@ uint16_t CLCD::FontMetrics::get_text_width(progmem_str str, size_t n) const {
/************************** HOST COMMAND FUNCTION *********************************/ /************************** HOST COMMAND FUNCTION *********************************/
void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD void CLCD::host_cmd(unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD
if (host_command != FTDI::ACTIVE) { if (host_command != FTDI::ACTIVE) {
host_command |= 0x40; host_command |= 0x40;
} }
@ -92,7 +92,7 @@ void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Send
/************************** MEMORY READ FUNCTIONS *********************************/ /************************** MEMORY READ FUNCTIONS *********************************/
void CLCD::spi_read_addr (uint32_t reg_address) { void CLCD::spi_read_addr(uint32_t reg_address) {
spi_send((reg_address >> 16) & 0x3F); // Address [21:16] spi_send((reg_address >> 16) & 0x3F); // Address [21:16]
spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8] spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
spi_send((reg_address >> 0) & 0xFF); // Address [7:0] spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
@ -100,7 +100,7 @@ void CLCD::spi_read_addr (uint32_t reg_address) {
} }
// Write 4-Byte Address, Read Multiple Bytes // Write 4-Byte Address, Read Multiple Bytes
void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) { void CLCD::mem_read_bulk(uint32_t reg_address, uint8_t *data, uint16_t len) {
spi_ftdi_select(); spi_ftdi_select();
spi_read_addr(reg_address); spi_read_addr(reg_address);
spi_read_bulk (data, len); spi_read_bulk (data, len);
@ -108,7 +108,7 @@ void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) {
} }
// Write 4-Byte Address, Read 1-Byte Data // Write 4-Byte Address, Read 1-Byte Data
uint8_t CLCD::mem_read_8 (uint32_t reg_address) { uint8_t CLCD::mem_read_8(uint32_t reg_address) {
spi_ftdi_select(); spi_ftdi_select();
spi_read_addr(reg_address); spi_read_addr(reg_address);
uint8_t r_data = spi_read_8(); uint8_t r_data = spi_read_8();
@ -117,7 +117,7 @@ uint8_t CLCD::mem_read_8 (uint32_t reg_address) {
} }
// Write 4-Byte Address, Read 2-Bytes Data // Write 4-Byte Address, Read 2-Bytes Data
uint16_t CLCD::mem_read_16 (uint32_t reg_address) { uint16_t CLCD::mem_read_16(uint32_t reg_address) {
using namespace SPI::least_significant_byte_first; using namespace SPI::least_significant_byte_first;
spi_ftdi_select(); spi_ftdi_select();
spi_read_addr(reg_address); spi_read_addr(reg_address);
@ -127,7 +127,7 @@ uint16_t CLCD::mem_read_16 (uint32_t reg_address) {
} }
// Write 4-Byte Address, Read 4-Bytes Data // Write 4-Byte Address, Read 4-Bytes Data
uint32_t CLCD::mem_read_32 (uint32_t reg_address) { uint32_t CLCD::mem_read_32(uint32_t reg_address) {
using namespace SPI::least_significant_byte_first; using namespace SPI::least_significant_byte_first;
spi_ftdi_select(); spi_ftdi_select();
spi_read_addr(reg_address); spi_read_addr(reg_address);
@ -147,14 +147,14 @@ static inline uint8_t reverse_byte(uint8_t a) {
} }
static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));} static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));}
void CLCD::spi_write_addr (uint32_t reg_address) { void CLCD::spi_write_addr(uint32_t reg_address) {
spi_send((reg_address >> 16) | 0x80); // Address [21:16] spi_send((reg_address >> 16) | 0x80); // Address [21:16]
spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8] spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
spi_send((reg_address >> 0) & 0xFF); // Address [7:0] spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
} }
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM
void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { void CLCD::mem_write_bulk(uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
spi_write_bulk<ram_write>(data, len, padding); spi_write_bulk<ram_write>(data, len, padding);
@ -162,7 +162,7 @@ void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len,
} }
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) { void CLCD::mem_write_bulk(uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) {
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
spi_write_bulk<pgm_write>(str, len, padding); spi_write_bulk<pgm_write>(str, len, padding);
@ -170,7 +170,7 @@ void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len,
} }
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) { void CLCD::mem_write_pgm(uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
spi_write_bulk<pgm_write>(data, len, padding); spi_write_bulk<pgm_write>(data, len, padding);
@ -178,7 +178,7 @@ void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len,
} }
// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images) // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images)
void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) { void CLCD::mem_write_xbm(uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) {
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
spi_write_bulk<xbm_write>(data, len, padding); spi_write_bulk<xbm_write>(data, len, padding);
@ -186,7 +186,7 @@ void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len,
} }
// Write 3-Byte Address, Write 1-Byte Data // Write 3-Byte Address, Write 1-Byte Data
void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) { void CLCD::mem_write_8(uint32_t reg_address, uint8_t data) {
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
spi_write_8(data); spi_write_8(data);
@ -194,16 +194,16 @@ void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) {
} }
// Write 3-Byte Address, Write 2-Bytes Data // Write 3-Byte Address, Write 2-Bytes Data
void CLCD::mem_write_16 (uint32_t reg_address, uint16_t data) { void CLCD::mem_write_16(uint32_t reg_address, uint16_t data) {
using namespace SPI::least_significant_byte_first; using namespace SPI::least_significant_byte_first;
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
spi_write_32(data); spi_write_16(data);
spi_ftdi_deselect(); spi_ftdi_deselect();
} }
// Write 3-Byte Address, Write 4-Bytes Data // Write 3-Byte Address, Write 4-Bytes Data
void CLCD::mem_write_32 (uint32_t reg_address, uint32_t data) { void CLCD::mem_write_32(uint32_t reg_address, uint32_t data) {
using namespace SPI::least_significant_byte_first; using namespace SPI::least_significant_byte_first;
spi_ftdi_select(); spi_ftdi_select();
spi_write_addr(reg_address); spi_write_addr(reg_address);
@ -281,7 +281,7 @@ void CLCD::CommandFifo::text(int16_t x, int16_t y, int16_t font, uint16_t optio
} }
// This sends the a toggle command to the command preprocessor, must be followed by str() // This sends the a toggle command to the command preprocessor, must be followed by str()
void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) { void CLCD::CommandFifo::toggle(int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) {
struct { struct {
int32_t type = CMD_TOGGLE; int32_t type = CMD_TOGGLE;
int16_t x; int16_t x;
@ -303,7 +303,7 @@ void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, u
} }
// This sends the a keys command to the command preprocessor, must be followed by str() // This sends the a keys command to the command preprocessor, must be followed by str()
void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) { void CLCD::CommandFifo::keys(int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) {
struct { struct {
int32_t type = CMD_KEYS; int32_t type = CMD_KEYS;
int16_t x; int16_t x;
@ -324,7 +324,7 @@ void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms) void CLCD::CommandFifo::clock(int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms)
{ {
struct { struct {
int32_t type = CMD_CLOCK; int32_t type = CMD_CLOCK;
@ -350,7 +350,7 @@ void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range) void CLCD::CommandFifo::gauge(int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range)
{ {
struct { struct {
int32_t type = CMD_GAUGE; int32_t type = CMD_GAUGE;
@ -376,7 +376,7 @@ void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val) void CLCD::CommandFifo::dial(int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val)
{ {
struct { struct {
int32_t type = CMD_DIAL; int32_t type = CMD_DIAL;
@ -396,7 +396,7 @@ void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options,
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) { void CLCD::CommandFifo::scrollbar(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) {
struct { struct {
int32_t type = CMD_SCROLLBAR; int32_t type = CMD_SCROLLBAR;
int16_t x; int16_t x;
@ -421,7 +421,7 @@ void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, u
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { void CLCD::CommandFifo::progress(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
struct { struct {
int32_t type = CMD_PROGRESS; int32_t type = CMD_PROGRESS;
int16_t x; int16_t x;
@ -444,7 +444,7 @@ void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, ui
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) { void CLCD::CommandFifo::slider(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
struct { struct {
int32_t type = CMD_SLIDER; int32_t type = CMD_SLIDER;
int16_t x; int16_t x;
@ -467,7 +467,7 @@ void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) { void CLCD::CommandFifo::gradient(int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) {
struct { struct {
int32_t type = CMD_GRADIENT; int32_t type = CMD_GRADIENT;
int16_t x0; int16_t x0;
@ -488,7 +488,7 @@ void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) { void CLCD::CommandFifo::number(int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) {
struct { struct {
int32_t type = CMD_NUMBER; int32_t type = CMD_NUMBER;
int16_t x; int16_t x;
@ -507,7 +507,7 @@ void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t opt
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) { void CLCD::CommandFifo::memzero(uint32_t ptr, uint32_t size) {
struct { struct {
uint32_t type = CMD_MEMZERO; uint32_t type = CMD_MEMZERO;
uint32_t ptr; uint32_t ptr;
@ -520,7 +520,7 @@ void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) { void CLCD::CommandFifo::memset(uint32_t ptr, uint32_t val, uint32_t size) {
struct { struct {
uint32_t type = CMD_MEMSET; uint32_t type = CMD_MEMSET;
uint32_t ptr; uint32_t ptr;
@ -535,7 +535,7 @@ void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) { void CLCD::CommandFifo::memcpy(uint32_t dst, uint32_t src, uint32_t size) {
struct { struct {
uint32_t type = CMD_MEMCPY; uint32_t type = CMD_MEMCPY;
uint32_t dst; uint32_t dst;
@ -550,7 +550,7 @@ void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) { void CLCD::CommandFifo::memcrc(uint32_t ptr, uint32_t num, uint32_t result) {
struct { struct {
uint32_t type = CMD_MEMCRC; uint32_t type = CMD_MEMCRC;
uint32_t ptr; uint32_t ptr;
@ -565,7 +565,7 @@ void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) { void CLCD::CommandFifo::memwrite(uint32_t ptr, uint32_t value) {
struct { struct {
uint32_t type = CMD_MEMWRITE; uint32_t type = CMD_MEMWRITE;
uint32_t ptr; uint32_t ptr;
@ -580,7 +580,7 @@ void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) { void CLCD::CommandFifo::append(uint32_t ptr, uint32_t size) {
struct { struct {
uint32_t type = CMD_APPEND; uint32_t type = CMD_APPEND;
uint32_t ptr; uint32_t ptr;
@ -593,7 +593,7 @@ void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::inflate (uint32_t ptr) { void CLCD::CommandFifo::inflate(uint32_t ptr) {
struct { struct {
uint32_t type = CMD_INFLATE; uint32_t type = CMD_INFLATE;
uint32_t ptr; uint32_t ptr;
@ -604,7 +604,7 @@ void CLCD::CommandFifo::inflate (uint32_t ptr) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::getptr (uint32_t result) { void CLCD::CommandFifo::getptr(uint32_t result) {
struct { struct {
uint32_t type = CMD_GETPTR; uint32_t type = CMD_GETPTR;
uint32_t result; uint32_t result;
@ -696,7 +696,7 @@ void CLCD::CommandFifo::loadimage(uint32_t ptr, uint32_t options) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::getprops (uint32_t ptr, uint32_t width, uint32_t height) { void CLCD::CommandFifo::getprops(uint32_t ptr, uint32_t width, uint32_t height) {
struct { struct {
uint32_t type = CMD_GETPROPS; uint32_t type = CMD_GETPROPS;
uint32_t ptr; uint32_t ptr;
@ -735,7 +735,7 @@ void CLCD::CommandFifo::rotate(int32_t a) {
cmd( &cmd_data, sizeof(cmd_data) ); cmd( &cmd_data, sizeof(cmd_data) );
} }
void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) { void CLCD::CommandFifo::translate(int32_t tx, int32_t ty) {
struct { struct {
uint32_t type = CMD_TRANSLATE; uint32_t type = CMD_TRANSLATE;
int32_t tx; int32_t tx;
@ -749,7 +749,7 @@ void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) {
} }
#if FTDI_API_LEVEL >= 810 #if FTDI_API_LEVEL >= 810
void CLCD::CommandFifo::setbase (uint8_t base) { void CLCD::CommandFifo::setbase(uint8_t base) {
struct { struct {
int32_t type = CMD_SETBASE; int32_t type = CMD_SETBASE;
uint32_t base; uint32_t base;
@ -855,7 +855,7 @@ void CLCD::CommandFifo::playvideo(uint32_t options) {
#endif #endif
#if FTDI_API_LEVEL >= 810 #if FTDI_API_LEVEL >= 810
void CLCD::CommandFifo::setrotate (uint8_t rotation) { void CLCD::CommandFifo::setrotate(uint8_t rotation) {
struct { struct {
uint32_t type = CMD_SETROTATE; uint32_t type = CMD_SETROTATE;
uint32_t rotation; uint32_t rotation;
@ -868,7 +868,7 @@ void CLCD::CommandFifo::setrotate (uint8_t rotation) {
#endif #endif
#if FTDI_API_LEVEL >= 810 #if FTDI_API_LEVEL >= 810
void CLCD::CommandFifo::romfont (uint8_t font, uint8_t romslot) { void CLCD::CommandFifo::romfont(uint8_t font, uint8_t romslot) {
struct { struct {
uint32_t type = CMD_ROMFONT; uint32_t type = CMD_ROMFONT;
uint32_t font; uint32_t font;
@ -1054,18 +1054,12 @@ void CLCD::init() {
spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control
ftdi_reset(); // Power down/up the FT8xx with the apropriate delays ftdi_reset(); // Power down/up the FT8xx with the apropriate delays
if (Use_Crystal == 1) { host_cmd(Use_Crystal ? CLKEXT : CLKINT, 0);
host_cmd(CLKEXT, 0);
}
else {
host_cmd(CLKINT, 0);
}
host_cmd(FTDI::ACTIVE, 0); // Activate the System Clock host_cmd(FTDI::ACTIVE, 0); // Activate the System Clock
/* read the device-id until it returns 0x7c or times out, should take less than 150ms */ /* read the device-id until it returns 0x7c or times out, should take less than 150ms */
uint8_t counter; uint8_t counter;
for(counter = 0; counter < 250; counter++) { for (counter = 0; counter < 250; counter++) {
uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C; uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C;
if (device_id == 0x7c) { if (device_id == 0x7c) {
#if ENABLED(TOUCH_UI_DEBUG) #if ENABLED(TOUCH_UI_DEBUG)
@ -1073,9 +1067,9 @@ void CLCD::init() {
#endif #endif
break; break;
} }
else { else
delay(1); delay(1);
}
if (counter == 249) { if (counter == 249) {
#if ENABLED(TOUCH_UI_DEBUG) #if ENABLED(TOUCH_UI_DEBUG)
SERIAL_ECHO_START(); SERIAL_ECHO_START();
@ -1130,7 +1124,7 @@ void CLCD::init() {
mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module
mem_write_16(REG::PWM_HZ, 0x00FA); mem_write_16(REG::PWM_HZ, ENABLED(LCD_FYSETC_TFT81050) ? 0x2710 : 0x00FA);
// Turning off dithering seems to help prevent horizontal line artifacts on certain colors // Turning off dithering seems to help prevent horizontal line artifacts on certain colors
mem_write_8(REG::DITHER, 0); mem_write_8(REG::DITHER, 0);

34
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
View File

@ -27,7 +27,11 @@
/********************************* SPI Functions *********************************/ /********************************* SPI Functions *********************************/
namespace FTDI { namespace FTDI {
#ifndef CLCD_USE_SOFT_SPI #ifndef CLCD_USE_SOFT_SPI
#ifndef __AVR__
SPIClass EVE_SPI(CLCD_SPI_BUS);
#endif
SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0); SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0);
#endif #endif
@ -57,12 +61,12 @@ namespace FTDI {
SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO); SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO);
#else #else
::SPI.begin(); SPI_OBJ.begin();
#endif #endif
} }
#ifdef CLCD_USE_SOFT_SPI #ifdef CLCD_USE_SOFT_SPI
uint8_t SPI::_soft_spi_xfer (uint8_t spiOutByte) { uint8_t SPI::_soft_spi_xfer(uint8_t spiOutByte) {
uint8_t spiIndex = 0x80; uint8_t spiIndex = 0x80;
uint8_t spiInByte = 0; uint8_t spiInByte = 0;
uint8_t k; uint8_t k;
@ -71,8 +75,8 @@ namespace FTDI {
for (k = 0; k < 8; k++) { // Output and Read each bit of spiOutByte and spiInByte for (k = 0; k < 8; k++) { // Output and Read each bit of spiOutByte and spiInByte
WRITE(CLCD_SOFT_SPI_MOSI, (spiOutByte & spiIndex) ? 1 : 0); // Output MOSI Bit WRITE(CLCD_SOFT_SPI_MOSI, (spiOutByte & spiIndex) ? 1 : 0); // Output MOSI Bit
WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock
if (READ(CLCD_SOFT_SPI_MISO)) spiInByte |= spiIndex; // MISO changes on the falling edge of clock, so sample it before
WRITE(CLCD_SOFT_SPI_SCLK, 0); WRITE(CLCD_SOFT_SPI_SCLK, 0);
if (READ(CLCD_SOFT_SPI_MISO)) spiInByte |= spiIndex;
spiIndex >>= 1; spiIndex >>= 1;
} }
interrupts(); interrupts();
@ -81,7 +85,7 @@ namespace FTDI {
#endif #endif
#ifdef CLCD_USE_SOFT_SPI #ifdef CLCD_USE_SOFT_SPI
void SPI::_soft_spi_send (uint8_t spiOutByte) { void SPI::_soft_spi_send(uint8_t spiOutByte) {
uint8_t k, spiIndex = 0x80; uint8_t k, spiIndex = 0x80;
noInterrupts(); noInterrupts();
@ -95,16 +99,12 @@ namespace FTDI {
} }
#endif #endif
void SPI::spi_read_bulk (void *data, uint16_t len) { void SPI::spi_read_bulk(void *data, uint16_t len) {
uint8_t* p = (uint8_t *)data; uint8_t* p = (uint8_t *)data;
#ifndef CLCD_USE_SOFT_SPI while (len--) *p++ = spi_recv();
::SPI.transfer(p, len);
#else
while (len--) *p++ = spi_recv();
#endif
} }
bool SPI::spi_verify_bulk (const void *data, uint16_t len) { bool SPI::spi_verify_bulk(const void *data, uint16_t len) {
const uint8_t* p = (const uint8_t *)data; const uint8_t* p = (const uint8_t *)data;
while (len--) if (*p++ != spi_recv()) return false; while (len--) if (*p++ != spi_recv()) return false;
return true; return true;
@ -113,7 +113,7 @@ namespace FTDI {
// CLCD SPI - Chip Select // CLCD SPI - Chip Select
void SPI::spi_ftdi_select() { void SPI::spi_ftdi_select() {
#ifndef CLCD_USE_SOFT_SPI #ifndef CLCD_USE_SOFT_SPI
::SPI.beginTransaction(spi_settings); SPI_OBJ.beginTransaction(spi_settings);
#endif #endif
WRITE(CLCD_SPI_CS, 0); WRITE(CLCD_SPI_CS, 0);
#ifdef CLCD_SPI_EXTRA_CS #ifdef CLCD_SPI_EXTRA_CS
@ -129,25 +129,25 @@ namespace FTDI {
WRITE(CLCD_SPI_EXTRA_CS, 1); WRITE(CLCD_SPI_EXTRA_CS, 1);
#endif #endif
#ifndef CLCD_USE_SOFT_SPI #ifndef CLCD_USE_SOFT_SPI
::SPI.endTransaction(); SPI_OBJ.endTransaction();
#endif #endif
} }
#ifdef SPI_FLASH_SS #ifdef SPI_FLASH_SS
// Serial SPI Flash SPI - Chip Select // Serial SPI Flash SPI - Chip Select
void SPI::spi_flash_select () { void SPI::spi_flash_select() {
#ifndef CLCD_USE_SOFT_SPI #ifndef CLCD_USE_SOFT_SPI
::SPI.beginTransaction(spi_settings); SPI_OBJ.beginTransaction(spi_settings);
#endif #endif
WRITE(SPI_FLASH_SS, 0); WRITE(SPI_FLASH_SS, 0);
delayMicroseconds(1); delayMicroseconds(1);
} }
// Serial SPI Flash SPI - Chip Deselect // Serial SPI Flash SPI - Chip Deselect
void SPI::spi_flash_deselect () { void SPI::spi_flash_deselect() {
WRITE(SPI_FLASH_SS, 1); WRITE(SPI_FLASH_SS, 1);
#ifndef CLCD_USE_SOFT_SPI #ifndef CLCD_USE_SOFT_SPI
::SPI.endTransaction(); SPI_OBJ.endTransaction();
#endif #endif
} }
#endif #endif

12
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.h
View File

@ -27,6 +27,14 @@
#endif #endif
namespace FTDI { namespace FTDI {
#if defined(__AVR__) || defined(CLCD_USE_SOFT_SPI)
#define SPI_OBJ ::SPI
#else
extern SPIClass EVE_SPI;
#define SPI_OBJ EVE_SPI
#endif
namespace SPI { namespace SPI {
#ifndef CLCD_USE_SOFT_SPI #ifndef CLCD_USE_SOFT_SPI
extern SPISettings spi_settings; extern SPISettings spi_settings;
@ -47,7 +55,7 @@ namespace FTDI {
#ifdef CLCD_USE_SOFT_SPI #ifdef CLCD_USE_SOFT_SPI
return _soft_spi_xfer(0x00); return _soft_spi_xfer(0x00);
#else #else
return ::SPI.transfer(0x00); SPI_OBJ.transfer(0x00);
#endif #endif
}; };
@ -55,7 +63,7 @@ namespace FTDI {
#ifdef CLCD_USE_SOFT_SPI #ifdef CLCD_USE_SOFT_SPI
_soft_spi_send(val); _soft_spi_send(val);
#else #else
::SPI.transfer(val); SPI_OBJ.transfer(val);
#endif #endif
}; };

4
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/sound_list.h
View File

@ -30,9 +30,9 @@ class SoundList {
public: public:
static const uint8_t n; static const uint8_t n;
static inline const char* name(uint8_t val) { static inline const char* name(uint8_t val) {
return (const char* ) pgm_read_ptr_near(&list[val].name); return (const char* ) pgm_read_ptr_far(&list[val].name);
} }
static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) { static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) {
return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_near(&list[val].data); return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_far(&list[val].data);
} }
}; };

9
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/pin_mappings.h
View File

@ -154,3 +154,12 @@
#define CLCD_SPI_EXTRA_CS SDSS #define CLCD_SPI_EXTRA_CS SDSS
#endif #endif
#endif #endif
#if EITHER(E3_EXP1_PINMAP, GENERIC_EXP2_PINMAP)
#ifndef __MARLIN_FIRMWARE__
#error "This pin mapping requires Marlin."
#endif
#define CLCD_MOD_RESET BTN_EN1
#define CLCD_SPI_CS LCD_PINS_RS
#endif

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/about_screen.cpp
View File

@ -82,7 +82,7 @@ void AboutScreen::onRedraw(draw_mode_t) {
); );
draw_text_box(cmd, FW_VERS_POS, progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium); draw_text_box(cmd, FW_VERS_POS, progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium);
draw_text_box(cmd, FW_INFO_POS, about_str, OPT_CENTER, font_medium); draw_text_box(cmd, FW_INFO_POS, about_str, OPT_CENTER, font_medium);
draw_text_box(cmd, INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny); draw_text_box(cmd.tag(3), INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny);
cmd.font(font_medium) cmd.font(font_medium)
.colors(normal_btn) .colors(normal_btn)

4
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/interface_settings_screen.cpp
View File

@ -74,7 +74,9 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) {
#define EDGE_R 30 #define EDGE_R 30
.font(font_small) .font(font_small)
.tag(0) .tag(0)
#if DISABLED(LCD_FYSETC_TFT81050)
.text(BTN_POS(1,2), BTN_SIZE(2,1), GET_TEXT_F(MSG_LCD_BRIGHTNESS), OPT_RIGHTX | OPT_CENTERY) .text(BTN_POS(1,2), BTN_SIZE(2,1), GET_TEXT_F(MSG_LCD_BRIGHTNESS), OPT_RIGHTX | OPT_CENTERY)
#endif
.text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY) .text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY)
.text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY); .text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY);
#if DISABLED(TOUCH_UI_NO_BOOTSCREEN) #if DISABLED(TOUCH_UI_NO_BOOTSCREEN)
@ -93,7 +95,9 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) {
cmd.font(font_medium) cmd.font(font_medium)
#define EDGE_R 30 #define EDGE_R 30
.colors(ui_slider) .colors(ui_slider)
#if DISABLED(LCD_FYSETC_TFT81050)
.tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128) .tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128)
#endif
.tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF) .tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF)
.colors(ui_toggle) .colors(ui_toggle)
.tag(4).toggle2(BTN_POS(3,4), BTN_SIZE(w,1), GET_TEXT_F(MSG_NO), GET_TEXT_F(MSG_YES), LockScreen::is_enabled()) .tag(4).toggle2(BTN_POS(3,4), BTN_SIZE(w,1), GET_TEXT_F(MSG_NO), GET_TEXT_F(MSG_YES), LockScreen::is_enabled())

44
Marlin/src/pins/ramps/pins_RAMPS.h
View File

@ -721,3 +721,47 @@
#define BTN_ENC 63 #define BTN_ENC 63
#endif #endif
#endif #endif
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue."
/** FYSECT TFT TFT81050 display pinout
*
* Board Display
* _____ _____
* (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK
* (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS
* (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI
* RESET | 7 8 | D49 (SD_DET) SD_DET | 7 8 | RESET
* NC | 9 10| GND GND | 9 10| 5V
* ----- -----
* EXP2 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP2-1 ----------- EXP1-10
* EXP2-2 ----------- EXP1-9
* EXP2-4 ----------- EXP1-8
* EXP2-4 ----------- EXP1-7
* EXP2-3 ----------- EXP1-6
* EXP2-6 ----------- EXP1-5
* EXP2-7 ----------- EXP1-4
* EXP2-8 ----------- EXP1-3
* EXP2-1 ----------- EXP1-2
* EXT1-10 ----------- EXP1-1
*
*/
#define BEEPER_PIN 37
#define BTN_EN1 31
#define LCD_PINS_RS 33
#define SD_DETECT_PIN 49
#define KILL_PIN -1
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050

99
Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
View File

@ -47,20 +47,20 @@
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN PC1 // X-STOP #define X_STOP_PIN PC1 // "X-STOP"
#define Y_STOP_PIN PC0 // Y-STOP #define Y_STOP_PIN PC0 // "Y-STOP"
#define Z_STOP_PIN PC15 // Z-STOP #define Z_STOP_PIN PC15 // "Z-STOP"
// //
// Z Probe must be this pin // Z Probe must be this pin
// //
#define Z_MIN_PROBE_PIN PC14 // PROBE #define Z_MIN_PROBE_PIN PC14 // "PROBE"
// //
// Filament Runout Sensor // Filament Runout Sensor
// //
#ifndef FIL_RUNOUT_PIN #ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PC2 // E0-STOP #define FIL_RUNOUT_PIN PC2 // "E0-STOP"
#endif #endif
// //
@ -149,9 +149,9 @@
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PC8 // HE #define HEATER_0_PIN PC8 // "HE"
#define HEATER_BED_PIN PC9 // HB #define HEATER_BED_PIN PC9 // "HB"
#define FAN_PIN PA8 // FAN0 #define FAN_PIN PA8 // "FAN0"
// //
// USB connect control // USB connect control
@ -159,8 +159,6 @@
#define USB_CONNECT_PIN PC13 #define USB_CONNECT_PIN PC13
#define USB_CONNECT_INVERTING false #define USB_CONNECT_INVERTING false
#define SD_DETECT_PIN PC4
/** /**
* _____ * _____
* 5V | 1 2 | GND * 5V | 1 2 | GND
@ -182,18 +180,31 @@
#define EXPA1_10_PIN PA15 #define EXPA1_10_PIN PA15
#if HAS_SPI_LCD #if HAS_SPI_LCD
#define BTN_ENC EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#if ENABLED(CR10_STOCKDISPLAY) #if ENABLED(CR10_STOCKDISPLAY)
#define BEEPER_PIN EXPA1_10_PIN #define BEEPER_PIN EXPA1_10_PIN
#define BTN_ENC EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#define LCD_PINS_RS EXPA1_04_PIN #define LCD_PINS_RS EXPA1_04_PIN
#define LCD_PINS_ENABLE EXPA1_03_PIN #define LCD_PINS_ENABLE EXPA1_03_PIN
#define LCD_PINS_D4 EXPA1_05_PIN #define LCD_PINS_D4 EXPA1_05_PIN
#elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
#define LCD_PINS_RS EXPA1_05_PIN
#define LCD_PINS_ENABLE EXPA1_09_PIN
#define LCD_PINS_D4 EXPA1_04_PIN
#define LCD_PINS_D5 EXPA1_06_PIN
#define LCD_PINS_D6 EXPA1_08_PIN
#define LCD_PINS_D7 EXPA1_10_PIN
#define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD!
#elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY)
/** Creality Ender-2 display pinout /** Creality Ender-2 display pinout
@ -207,6 +218,10 @@
* EXP1 * EXP1
*/ */
#define BTN_ENC EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN
#define DOGLCD_CS EXPA1_04_PIN #define DOGLCD_CS EXPA1_04_PIN
#define DOGLCD_A0 EXPA1_05_PIN #define DOGLCD_A0 EXPA1_05_PIN
#define DOGLCD_SCK EXPA1_10_PIN #define DOGLCD_SCK EXPA1_10_PIN
@ -215,17 +230,71 @@
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
#else #else
#error "Only CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP." #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP."
#endif #endif
#endif // HAS_SPI_LCD #endif // HAS_SPI_LCD
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_E3_DIP.h' for details. Comment out this line to continue."
/** FYSECT TFT TFT81050 display pinout
*
* Board Display
* _____ _____
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)
* RESET | 7 8 | PA9 (MOD_RESET) (PA15) SD_DET | 7 8 | RESET
* (BEEPER) PB6 | 9 10| PA15 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- EXP1-5
* SP11-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- EXP1-8
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXT1-10 ----------- EXP1-4
*
*/
#define CLCD_SPI_BUS 1 // SPI1 connector
#define BEEPER_PIN EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN
#define LCD_PINS_RS EXPA1_04_PIN
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
// //
// SD Support // SD Support
// //
#ifndef SDCARD_CONNECTION #ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD #define SDCARD_CONNECTION ONBOARD
#endif #endif
#define ON_BOARD_SPI_DEVICE 1 //SPI1 #if SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN PC4
#endif
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN EXPA1_10_PIN
#define SS_PIN EXPA1_06_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP."
#endif
#define ON_BOARD_SPI_DEVICE 1 // SPI1
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card

89
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h
View File

@ -40,19 +40,19 @@
// //
// Servos // Servos
// //
#define SERVO0_PIN PA1 #define SERVO0_PIN PA1 // "SERVOS"
// //
// Limit Switches // Limit Switches
// //
#define X_STOP_PIN PC0 #define X_STOP_PIN PC0 // "X-STOP"
#define Y_STOP_PIN PC1 #define Y_STOP_PIN PC1 // "Y-STOP"
#define Z_STOP_PIN PC2 #define Z_STOP_PIN PC2 // "Z-STOP"
// //
// Z Probe must be this pins // Z Probe must be this pin
// //
#define Z_MIN_PROBE_PIN PC14 #define Z_MIN_PROBE_PIN PC14 // "PROBE"
// //
// Filament Runout Sensor // Filament Runout Sensor
@ -83,15 +83,15 @@
// //
// Temperature Sensors // Temperature Sensors
// //
#define TEMP_0_PIN PA0 // Analog Input #define TEMP_0_PIN PA0 // Analog Input "TH0"
#define TEMP_BED_PIN PC3 // Analog Input #define TEMP_BED_PIN PC3 // Analog Input "TB0"
// //
// Heaters / Fans // Heaters / Fans
// //
#define HEATER_0_PIN PC8 // EXTRUDER #define HEATER_0_PIN PC8 // "HE"
#define HEATER_BED_PIN PC9 // BED #define HEATER_BED_PIN PC9 // "HB"
#define FAN_PIN PA8 #define FAN_PIN PA8 // "FAN0"
// //
// USB connect control // USB connect control
@ -99,8 +99,6 @@
#define USB_CONNECT_PIN PC13 #define USB_CONNECT_PIN PC13
#define USB_CONNECT_INVERTING false #define USB_CONNECT_INVERTING false
#define SD_DETECT_PIN PC4
/** /**
* _____ * _____
* 5V | 1 2 | GND * 5V | 1 2 | GND
@ -127,9 +125,9 @@
#define BEEPER_PIN EXPA1_10_PIN #define BEEPER_PIN EXPA1_10_PIN
#define BTN_ENC EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN #define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN #define BTN_EN2 EXPA1_06_PIN
#define BTN_ENC EXPA1_09_PIN
#define LCD_PINS_RS EXPA1_04_PIN #define LCD_PINS_RS EXPA1_04_PIN
#define LCD_PINS_ENABLE EXPA1_03_PIN #define LCD_PINS_ENABLE EXPA1_03_PIN
@ -159,9 +157,10 @@
* ----- * -----
* EXP1 * EXP1
*/ */
#define BTN_ENC EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN #define BTN_EN1 EXPA1_08_PIN
#define BTN_EN2 EXPA1_06_PIN #define BTN_EN2 EXPA1_06_PIN
#define BTN_ENC EXPA1_09_PIN
#define DOGLCD_CS EXPA1_04_PIN #define DOGLCD_CS EXPA1_04_PIN
#define DOGLCD_A0 EXPA1_05_PIN #define DOGLCD_A0 EXPA1_05_PIN
@ -171,19 +170,73 @@
#define LCD_BACKLIGHT_PIN -1 #define LCD_BACKLIGHT_PIN -1
#else #else
#error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3."
#error "Only ZONESTAR_LCD, MKS_MINI_12864, ENDER2_STOCKDISPLAY, and CR10_STOCKDISPLAY are currently supported on the BIGTREE_SKR_MINI_E3."
#endif #endif
#endif // HAS_SPI_LCD #endif // HAS_SPI_LCD
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue."
/** FYSECT TFT TFT81050 display pinout
*
* Board Display
* _____ _____
* 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK)
* (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10)
* (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI)
* RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | RESET
* (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V
* ----- -----
* EXP1 EXP1
*
* Needs custom cable:
*
* Board Adapter Display
* _________
* EXP1-1 ----------- EXP1-10
* EXP1-2 ----------- EXP1-9
* SPI1-4 ----------- EXP1-6
* EXP1-4 ----------- EXP1-5
* SPI1-3 ----------- EXP1-2
* EXP1-6 ----------- EXP1-4
* EXP1-7 ----------- EXP1-8
* EXP1-8 ----------- EXP1-3
* SPI1-1 ----------- EXP1-1
* EXP1-10 ----------- EXP1-4
*
*/
#define CLCD_SPI_BUS 1 // SPI1 connector
#define BEEPER_PIN EXPA1_09_PIN
#define BTN_EN1 EXPA1_08_PIN
#define LCD_PINS_RS EXPA1_04_PIN
#define LCD_PINS_ENABLE EXPA1_03_PIN
#define LCD_PINS_D4 EXPA1_05_PIN
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
// //
// SD Support // SD Support
// //
#ifndef SDCARD_CONNECTION #ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD #define SDCARD_CONNECTION ONBOARD
#endif #endif
#if SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN PC4
#endif
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN EXPA1_10_PIN
#define SS_PIN EXPA1_06_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
#endif
#define ON_BOARD_SPI_DEVICE 1 // SPI1 #define ON_BOARD_SPI_DEVICE 1 // SPI1
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card

Write Preview
Loading…
Cancel
Save