Browse Source

Init PWM-able auto fan pins with `SET_OUTPUT`

pull/1/head
Scott Lahteine 8 years ago
parent
commit
3475fd7b0f
  1. 28
      Marlin/temperature.cpp

28
Marlin/temperature.cpp

@ -1068,17 +1068,45 @@ void Temperature::init() {
#endif #endif
#if HAS_AUTO_FAN_0 #if HAS_AUTO_FAN_0
#if EXTRUDER_0_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_0_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_0_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#else
pinMode(EXTRUDER_0_AUTO_FAN_PIN, OUTPUT); pinMode(EXTRUDER_0_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif
#if HAS_AUTO_FAN_1 && (EXTRUDER_1_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) #if HAS_AUTO_FAN_1 && (EXTRUDER_1_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN)
#if EXTRUDER_1_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_1_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_1_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#else
pinMode(EXTRUDER_1_AUTO_FAN_PIN, OUTPUT); pinMode(EXTRUDER_1_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif
#if HAS_AUTO_FAN_2 && (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) #if HAS_AUTO_FAN_2 && (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN)
#if EXTRUDER_2_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_2_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_2_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#else
pinMode(EXTRUDER_2_AUTO_FAN_PIN, OUTPUT); pinMode(EXTRUDER_2_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif
#if HAS_AUTO_FAN_3 && (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) && (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN) #if HAS_AUTO_FAN_3 && (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) && (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN)
#if EXTRUDER_3_AUTO_FAN_PIN == FAN1_PIN
SET_OUTPUT(EXTRUDER_3_AUTO_FAN_PIN);
#if ENABLED(FAST_PWM_FAN)
setPwmFrequency(EXTRUDER_3_AUTO_FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
#endif
#else
pinMode(EXTRUDER_3_AUTO_FAN_PIN, OUTPUT); pinMode(EXTRUDER_3_AUTO_FAN_PIN, OUTPUT);
#endif #endif
#endif
// Use timer0 for temperature measurement // Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt // Interleave temperature interrupt with millies interrupt

Loading…
Cancel
Save