andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Clean up comments and spacing

pull/1/head
Richard Wackerbarth 10 years ago
parent
8c760f1c31 42465ee444
commit
316469e76a
5 changed files with 52 additions and 52 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 54
      Marlin/Marlin.ino
  2. 5
      Marlin/Marlin_main.cpp
  3. 7
      Marlin/pins_SANGUINOLOLU_11.h
  4. 28
      Marlin/servo.cpp

54
Marlin/Marlin.ino
View File

@ -1,30 +1,30 @@
/* -*- c++ -*- */ /**
* Marlin Firmware
/* *
Reprap firmware based on Sprinter and grbl. * Based on Sprinter and grbl.
Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
This program is free software: you can redistribute it and/or modify * This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or * the Free Software Foundation, either version 3 of the License, or
(at your option) any later version. * (at your option) any later version.
*
This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details. * GNU General Public License for more details.
*
You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ *
* About Marlin
/* *
This firmware is a mashup between Sprinter and grbl. * This firmware is a mashup between Sprinter and grbl.
(https://github.com/kliment/Sprinter) * - https://github.com/kliment/Sprinter
(https://github.com/simen/grbl/tree) * - https://github.com/simen/grbl/tree
*
It has preliminary support for Matthew Roberts advance algorithm * It has preliminary support for Matthew Roberts advance algorithm
http://reprap.org/pipermail/reprap-dev/2011-May/003323.html * - http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
*/ */
/* All the implementation is done in *.cpp files to get better compatibility with avr-gcc without the Arduino IDE */ /* All the implementation is done in *.cpp files to get better compatibility with avr-gcc without the Arduino IDE */

5
Marlin/Marlin_main.cpp
View File

@ -3805,7 +3805,7 @@ inline void gcode_M81() {
inline void gcode_M82() { axis_relative_modes[E_AXIS] = false; } inline void gcode_M82() { axis_relative_modes[E_AXIS] = false; }
/** /**
* M82: Set E codes relative while in Absolute Coordinates (G90) mode * M83: Set E codes relative while in Absolute Coordinates (G90) mode
*/ */
inline void gcode_M83() { axis_relative_modes[E_AXIS] = true; } inline void gcode_M83() { axis_relative_modes[E_AXIS] = true; }
@ -6153,6 +6153,9 @@ void mesh_plan_buffer_line(float x, float y, float z, const float e, float feed_
/** /**
* Prepare a single move and get ready for the next one * Prepare a single move and get ready for the next one
*
* (This may call plan_buffer_line several times to put
* smaller moves into the planner for DELTA or SCARA.)
*/ */
void prepare_move() { void prepare_move() {
clamp_to_software_endstops(destination); clamp_to_software_endstops(destination);

7
Marlin/pins_SANGUINOLOLU_11.h
View File

@ -50,19 +50,16 @@
#ifdef NUM_SERVOS #ifdef NUM_SERVOS
#define SERVO0_PIN -1 #define SERVO0_PIN -1
#if NUM_SERVOS > 1 #if NUM_SERVOS > 1
#define SERVO1_PIN -1 #define SERVO1_PIN -1
#endif
#if NUM_SERVOS > 2 #if NUM_SERVOS > 2
#define SERVO2_PIN -1 #define SERVO2_PIN -1
#endif
#if NUM_SERVOS > 3 #if NUM_SERVOS > 3
#define SERVO3_PIN -1 #define SERVO3_PIN -1
#endif #endif
#endif #endif
#endif
#endif
#define PS_ON_PIN -1 #define PS_ON_PIN -1
#define KILL_PIN -1 #define KILL_PIN -1

28
Marlin/servo.cpp
View File

@ -101,29 +101,29 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform #ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
// Interrupt handlers for Arduino // Interrupt handlers for Arduino
#if defined(_useTimer1) #ifdef _useTimer1
SIGNAL (TIMER1_COMPA_vect) { handle_interrupts(_timer1, &TCNT1, &OCR1A); } SIGNAL (TIMER1_COMPA_vect) { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif #endif
#if defined(_useTimer3) #ifdef _useTimer3
SIGNAL (TIMER3_COMPA_vect) { handle_interrupts(_timer3, &TCNT3, &OCR3A); } SIGNAL (TIMER3_COMPA_vect) { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif #endif
#if defined(_useTimer4) #ifdef _useTimer4
SIGNAL (TIMER4_COMPA_vect) { handle_interrupts(_timer4, &TCNT4, &OCR4A); } SIGNAL (TIMER4_COMPA_vect) { handle_interrupts(_timer4, &TCNT4, &OCR4A); }
#endif #endif
#if defined(_useTimer5) #ifdef _useTimer5
SIGNAL (TIMER5_COMPA_vect) { handle_interrupts(_timer5, &TCNT5, &OCR5A); } SIGNAL (TIMER5_COMPA_vect) { handle_interrupts(_timer5, &TCNT5, &OCR5A); }
#endif #endif
#else //!WIRING #else //!WIRING
// Interrupt handlers for Wiring // Interrupt handlers for Wiring
#if defined(_useTimer1) #ifdef _useTimer1
void Timer1Service() { handle_interrupts(_timer1, &TCNT1, &OCR1A); } void Timer1Service() { handle_interrupts(_timer1, &TCNT1, &OCR1A); }
#endif #endif
#if defined(_useTimer3) #ifdef _useTimer3
void Timer3Service() { handle_interrupts(_timer3, &TCNT3, &OCR3A); } void Timer3Service() { handle_interrupts(_timer3, &TCNT3, &OCR3A); }
#endif #endif
@ -131,7 +131,7 @@ static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t
static void initISR(timer16_Sequence_t timer) { static void initISR(timer16_Sequence_t timer) {
#if defined(_useTimer1) #ifdef _useTimer1
if (timer == _timer1) { if (timer == _timer1) {
TCCR1A = 0; // normal counting mode TCCR1A = 0; // normal counting mode
TCCR1B = _BV(CS11); // set prescaler of 8 TCCR1B = _BV(CS11); // set prescaler of 8
@ -144,31 +144,31 @@ static void initISR(timer16_Sequence_t timer) {
TIFR1 |= _BV(OCF1A); // clear any pending interrupts; TIFR1 |= _BV(OCF1A); // clear any pending interrupts;
TIMSK1 |= _BV(OCIE1A); // enable the output compare interrupt TIMSK1 |= _BV(OCIE1A); // enable the output compare interrupt
#endif #endif
#if defined(WIRING) #ifdef WIRING
timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service); timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service);
#endif #endif
} }
#endif #endif
#if defined(_useTimer3) #ifdef _useTimer3
if (timer == _timer3) { if (timer == _timer3) {
TCCR3A = 0; // normal counting mode TCCR3A = 0; // normal counting mode
TCCR3B = _BV(CS31); // set prescaler of 8 TCCR3B = _BV(CS31); // set prescaler of 8
TCNT3 = 0; // clear the timer count TCNT3 = 0; // clear the timer count
#if defined(__AVR_ATmega128__) #ifdef __AVR_ATmega128__
TIFR |= _BV(OCF3A); // clear any pending interrupts; TIFR |= _BV(OCF3A); // clear any pending interrupts;
ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt
#else #else
TIFR3 = _BV(OCF3A); // clear any pending interrupts; TIFR3 = _BV(OCF3A); // clear any pending interrupts;
TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
#endif #endif
#if defined(WIRING) #ifdef WIRING
timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
#endif #endif
} }
#endif #endif
#if defined(_useTimer4) #ifdef _useTimer4
if (timer == _timer4) { if (timer == _timer4) {
TCCR4A = 0; // normal counting mode TCCR4A = 0; // normal counting mode
TCCR4B = _BV(CS41); // set prescaler of 8 TCCR4B = _BV(CS41); // set prescaler of 8
@ -178,7 +178,7 @@ static void initISR(timer16_Sequence_t timer) {
} }
#endif #endif
#if defined(_useTimer5) #ifdef _useTimer5
if (timer == _timer5) { if (timer == _timer5) {
TCCR5A = 0; // normal counting mode TCCR5A = 0; // normal counting mode
TCCR5B = _BV(CS51); // set prescaler of 8 TCCR5B = _BV(CS51); // set prescaler of 8
@ -191,7 +191,7 @@ static void initISR(timer16_Sequence_t timer) {
static void finISR(timer16_Sequence_t timer) { static void finISR(timer16_Sequence_t timer) {
// Disable use of the given timer // Disable use of the given timer
#if defined(WIRING) #ifdef WIRING
if (timer == _timer1) { if (timer == _timer1) {
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__) #if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK1 TIMSK1

Write Preview
Loading…
Cancel
Save