Add RACK_AND_PINION_PROBE (#12218)

Marlin/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/default/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -802,6 +802,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Anet/A2/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Anet/A2plus/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -830,6 +830,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -789,6 +789,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/ArmEd/Configuration.h

@@ -783,6 +783,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -770,6 +770,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -783,6 +783,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -770,6 +770,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -781,6 +781,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -792,6 +792,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

@@ -801,6 +801,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/CR-8/Configuration.h

@@ -792,6 +792,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

@@ -786,6 +786,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/Ender-3/Configuration.h

@@ -786,6 +786,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

@@ -792,6 +792,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Einstart-S/Configuration.h

@@ -793,6 +793,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Felix/Configuration.h

@@ -764,6 +764,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -764,6 +764,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -788,6 +788,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Formbot/Raptor/Configuration.h

@@ -866,6 +866,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -820,6 +820,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h

@@ -803,6 +803,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -797,6 +797,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h

@@ -789,6 +789,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -798,6 +798,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -797,6 +797,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -786,6 +786,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/JGAurora/A5/Configuration.h

@@ -794,6 +794,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -802,6 +802,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -802,6 +802,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -781,6 +781,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -786,6 +786,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -786,6 +786,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h

@@ -822,6 +822,13 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -780,6 +780,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/SCARA/Configuration.h

@@ -795,6 +795,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -784,6 +784,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/STM32F4/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -813,6 +813,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/TheBorg/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -833,6 +833,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Tronxy/X3A/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

@@ -793,6 +793,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -811,6 +811,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -792,6 +792,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -782,6 +782,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h

@@ -918,6 +918,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -864,6 +864,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

@@ -864,6 +864,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -864,6 +864,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -869,6 +869,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -854,6 +854,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -854,6 +854,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -847,6 +847,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -857,6 +857,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 /**
  * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
  * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -795,6 +795,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/makibox/Configuration.h

@@ -785,6 +785,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -784,6 +784,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -777,6 +777,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/config/examples/wt150/Configuration.h

@@ -787,6 +787,13 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5  // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+  #define Z_PROBE_DEPLOY_X  X_MIN_POS
+  #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
 //
 // For Z_PROBE_ALLEN_KEY see the Delta example configurations.
 //

Marlin/src/inc/Conditionals_LCD.h

@@ -536,7 +536,7 @@
 /**
  * Set flags for enabled probes
  */
-#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE) || ENABLED(SENSORLESS_PROBING))
+#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE) || ENABLED(SENSORLESS_PROBING) || ENABLED(RACK_AND_PINION_PROBE))
 #define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
 
 #if !HAS_BED_PROBE

Marlin/src/inc/SanityCheck.h

@@ -891,7 +891,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
   + ENABLED(BLTOUCH) \
   + ENABLED(SOLENOID_PROBE) \
   + ENABLED(Z_PROBE_ALLEN_KEY) \
-  + ENABLED(Z_PROBE_SLED)
+  + ENABLED(Z_PROBE_SLED) \
+  + ENABLED(RACK_AND_PINION_PROBE)
   #error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
 #endif
 
@@ -934,6 +935,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
     #endif
   #endif
 
+  #if ENABLED(RACK_AND_PINION_PROBE) && !(defined(Z_PROBE_DEPLOY_X) && defined(Z_PROBE_RETRACT_X))
+    #error "RACK_AND_PINION_PROBE requires Z_PROBE_DEPLOY_X and Z_PROBE_RETRACT_X."
+  #endif
+
   /**
    * Require pin options and pins to be defined
    */

Marlin/src/module/probe.cpp

@@ -468,6 +468,10 @@ bool set_probe_deployed(const bool deploy) {
 
         deploy ? run_deploy_moves_script() : run_stow_moves_script();
 
+      #elif ENABLED(RACK_AND_PINION_PROBE)
+        
+        do_blocking_move_to_x(deploy ? Z_PROBE_DEPLOY_X : Z_PROBE_RETRACT_X);
+
       #endif
 
   #ifdef _TRIGGERED_WHEN_STOWED_TEST