A specific option to SLIM_LCD_MENUS

Marlin/Configuration_adv.h

@@ -473,6 +473,9 @@
 // Include a page of printer information in the LCD Main Menu
 //#define LCD_INFO_MENU
 
+// Leave out seldom-used LCD menu items to recover some Program Memory
+//#define SLIM_LCD_MENUS
+
 // Scroll a longer status message into view
 //#define STATUS_MESSAGE_SCROLLING
 

Marlin/src/lcd/ultralcd.cpp

@@ -176,9 +176,12 @@ uint16_t max_display_update_time = 0;
   void lcd_move_menu();
   void lcd_control_menu();
   void lcd_control_temperature_menu();
+  void lcd_control_motion_menu();
+
+  #if DISABLED(SLIM_LCD_MENUS)
     void lcd_control_temperature_preheat_material1_settings_menu();
     void lcd_control_temperature_preheat_material2_settings_menu();
-  void lcd_control_motion_menu();
+  #endif
 
   #if DISABLED(NO_VOLUMETRICS)
     void lcd_control_filament_menu();
@@ -2627,7 +2630,7 @@ void kill_screen(const char* lcd_msg) {
               lcd_bed_leveling
             #endif
           );
-    #elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY)
+    #elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY) && DISABLED(SLIM_LCD_MENUS)
       MENU_ITEM(gcode, MSG_BED_LEVELING, PSTR("G28\nG29"));
     #endif
 
@@ -2636,7 +2639,7 @@ void kill_screen(const char* lcd_msg) {
         MENU_ITEM(function, MSG_LEVEL_CORNERS, _lcd_level_bed_corners);
     #endif
 
-    #if HAS_M206_COMMAND
+    #if HAS_M206_COMMAND && DISABLED(SLIM_LCD_MENUS)
       //
       // Set Home Offsets
       //
@@ -3250,8 +3253,10 @@ void kill_screen(const char* lcd_msg) {
       MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
       MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
     #endif
+
     MENU_ITEM(function, MSG_RESTORE_FAILSAFE, lcd_factory_settings);
-    #if ENABLED(EEPROM_SETTINGS)
+
+    #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
       MENU_ITEM(submenu, MSG_INIT_EEPROM, lcd_init_eeprom_confirm);
     #endif
 
@@ -3463,6 +3468,7 @@ void kill_screen(const char* lcd_msg) {
 
     #endif // PIDTEMP
 
+    #if DISABLED(SLIM_LCD_MENUS)
       //
       // Preheat Material 1 conf
       //
@@ -3472,9 +3478,13 @@ void kill_screen(const char* lcd_msg) {
       // Preheat Material 2 conf
       //
       MENU_ITEM(submenu, MSG_PREHEAT_2_SETTINGS, lcd_control_temperature_preheat_material2_settings_menu);
+    #endif
+
     END_MENU();
   }
 
+  #if DISABLED(SLIM_LCD_MENUS)
+
     void _lcd_control_temperature_preheat_settings_menu(uint8_t material) {
       #if HOTENDS > 4
         #define MINTEMP_ALL MIN5(HEATER_0_MINTEMP, HEATER_1_MINTEMP, HEATER_2_MINTEMP, HEATER_3_MINTEMP, HEATER_4_MINTEMP)
@@ -3521,13 +3531,6 @@ void kill_screen(const char* lcd_msg) {
      */
     void lcd_control_temperature_preheat_material2_settings_menu() { _lcd_control_temperature_preheat_settings_menu(1); }
 
-
-  /**
-   *
-   * "Control" > "Motion" submenu
-   *
-   */
-
     void _reset_acceleration_rates() { planner.reset_acceleration_rates(); }
     #if ENABLED(DISTINCT_E_FACTORS)
       void _reset_e_acceleration_rate(const uint8_t e) { if (e == active_extruder) _reset_acceleration_rates(); }
@@ -3686,6 +3689,14 @@ void kill_screen(const char* lcd_msg) {
       END_MENU();
     }
 
+  #endif // !SLIM_LCD_MENUS
+
+  /**
+   *
+   * "Control" > "Motion" submenu
+   *
+   */
+
   void lcd_control_motion_menu() {
     START_MENU();
     MENU_BACK(MSG_CONTROL);
@@ -3696,6 +3707,8 @@ void kill_screen(const char* lcd_msg) {
       MENU_ITEM_EDIT(float32, MSG_ZPROBE_ZOFFSET, &zprobe_zoffset, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
     #endif
 
+    #if DISABLED(SLIM_LCD_MENUS)
+
       // M203 / M205 - Feedrate items
       MENU_ITEM(submenu, MSG_VELOCITY, lcd_control_motion_velocity_menu);
 
@@ -3708,6 +3721,8 @@ void kill_screen(const char* lcd_msg) {
       // M92 - Steps Per mm
       MENU_ITEM(submenu, MSG_STEPS_PER_MM, lcd_control_motion_steps_per_mm_menu);
 
+    #endif // !SLIM_LCD_MENUS
+
     // M540 S - Abort on endstop hit when SD printing
     #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
       MENU_ITEM_EDIT(bool, MSG_ENDSTOP_ABORT, &stepper.abort_on_endstop_hit);