Browse Source

Wrap Dual Y options in a conditional

pull/1/head
Scott Lahteine 9 years ago
committed by Richard Wackerbarth
parent
commit
28599c51c7
  1. 2
      Marlin/Configuration_adv.h
  2. 2
      Marlin/configurator/config/Configuration_adv.h
  3. 2
      Marlin/example_configurations/Felix/Configuration_adv.h
  4. 2
      Marlin/example_configurations/Hephestos/Configuration_adv.h
  5. 2
      Marlin/example_configurations/K8200/Configuration_adv.h
  6. 2
      Marlin/example_configurations/RigidBot/Configuration_adv.h
  7. 2
      Marlin/example_configurations/SCARA/Configuration_adv.h
  8. 2
      Marlin/example_configurations/TAZ4/Configuration_adv.h
  9. 2
      Marlin/example_configurations/WITBOX/Configuration_adv.h
  10. 2
      Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
  11. 2
      Marlin/example_configurations/delta/generic/Configuration_adv.h
  12. 2
      Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
  13. 2
      Marlin/example_configurations/makibox/Configuration_adv.h
  14. 2
      Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

2
Marlin/Configuration_adv.h

@ -157,8 +157,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/configurator/config/Configuration_adv.h

@ -157,8 +157,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/Felix/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/Hephestos/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/K8200/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/RigidBot/Configuration_adv.h

@ -157,8 +157,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/SCARA/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/TAZ4/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/WITBOX/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/delta/generic/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/makibox/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

2
Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@ -165,8 +165,10 @@
// Same again but for Y Axis.
//#define Y_DUAL_STEPPER_DRIVERS
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
// Define if the two Y drives need to rotate in opposite directions
#define INVERT_Y2_VS_Y_DIR true
#endif
// Enable this for dual x-carriage printers.
// A dual x-carriage design has the advantage that the inactive extruder can be parked which

Loading…
Cancel
Save