Browse Source

[2.0.x] BIBO Cyclops (#9541)

pull/1/head
shaktee 7 years ago
committed by Scott Lahteine
parent
commit
27faeafc1b
  1. 2
      Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h
  2. 1819
      Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
  3. 41
      Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

2
Marlin/src/config/examples/BIBO/TouchX/Configuration_adv.h

@ -32,7 +32,7 @@
*/ */
#ifndef CONFIGURATION_ADV_H #ifndef CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H
#define CONFIGURATION_ADV_H_VERSION 020000 #define CONFIGURATION_ADV_H_VERSION 020000
// @section temperature // @section temperature

1819
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

File diff suppressed because it is too large

41
Marlin/src/config/examples/BIBO/TouchX/Configuration.h → Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

@ -59,14 +59,14 @@
//============================= DELTA Printer =============================== //============================= DELTA Printer ===============================
//=========================================================================== //===========================================================================
// For a Delta printer start with one of the configuration files in the // For a Delta printer start with one of the configuration files in the
// example_configurations/delta directory and customize for your machine. // config/examples/delta directory and customize for your machine.
// //
//=========================================================================== //===========================================================================
//============================= SCARA Printer =============================== //============================= SCARA Printer ===============================
//=========================================================================== //===========================================================================
// For a SCARA printer start with the configuration files in // For a SCARA printer start with the configuration files in
// example_configurations/SCARA and customize for your machine. // config/examples/SCARA and customize for your machine.
// //
// @section info // @section info
@ -100,12 +100,21 @@
/** /**
* Select the serial port on the board to use for communication with the host. * Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins. * This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting. * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
* *
* :[0, 1, 2, 3, 4, 5, 6, 7] * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/ */
#define SERIAL_PORT 0 #define SERIAL_PORT 0
/**
* Select a secondary serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port -1 is the USB emulated serial port, if avaialble.
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT_2 -1
/** /**
* This setting determines the communication speed of the printer. * This setting determines the communication speed of the printer.
* *
@ -543,14 +552,14 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT {100,100,400,93.6} #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE {350, 350, 10, 25} #define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -558,7 +567,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION {1100,1100,300,5000} #define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -568,9 +577,9 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration in mm/s^2 for printing moves #define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration in mm/s^2 for retracts #define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -1433,6 +1442,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
// Enable one of the following options to specify your controller. // Enable one of the following options to specify your controller.
// //
//
// Original RADDS LCD Display+Encoder+SDCardReader
// http://doku.radds.org/dokumentation/lcd-display/
//
//#define RADDS_DISPLAY
// //
// ULTIMAKER Controller. // ULTIMAKER Controller.
// //
@ -1661,6 +1676,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
//#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
//
// AZSMZ 12864 LCD with SD
// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
//
//#define AZSMZ_12864
// Silvergate GLCD controller // Silvergate GLCD controller
// http://github.com/android444/Silvergate // http://github.com/android444/Silvergate
// //
Loading…
Cancel
Save