"SD card" => "Media" (#14951)

Marlin/src/lcd/language/language_an.h

@@ -33,8 +33,8 @@
 #define NOT_EXTENDED_ISO10646_1_5X7
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" parada.")
-#define MSG_SD_INSERTED                     _UxGT("Tarcheta mesa")
+#define MSG_MEDIA_INSERTED                  _UxGT("Tarcheta mesa")
-#define MSG_SD_REMOVED                      _UxGT("Tarcheta sacada")
+#define MSG_MEDIA_REMOVED                   _UxGT("Tarcheta sacada")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Menu prencipal")
 #define MSG_AUTOSTART                       _UxGT("Inicio automatico")
@@ -146,8 +146,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pausar impresion")
 #define MSG_RESUME_PRINT                    _UxGT("Contin. impresion")
 #define MSG_STOP_PRINT                      _UxGT("Detener Impresion")
-#define MSG_CARD_MENU                       _UxGT("Menu de SD")
+#define MSG_MEDIA_MENU                      _UxGT("Menu de SD")
-#define MSG_NO_CARD                         _UxGT("No i hai tarcheta")
+#define MSG_NO_MEDIA                        _UxGT("No i hai tarcheta")
 #define MSG_DWELL                           _UxGT("Reposo...")
 #define MSG_USERWAIT                        _UxGT("Aguardand ordines")
 #define MSG_PRINT_ABORTED                   _UxGT("Impres. cancelada")
@@ -163,8 +163,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("DesRet F")
 #define MSG_AUTORETRACT                     _UxGT("Retraccion auto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Cambear filamento")
-#define MSG_INIT_SDCARD                     _UxGT("Encetan. tarcheta")
+#define MSG_INIT_MEDIA                      _UxGT("Encetan. tarcheta")
-#define MSG_CHANGE_SDCARD                   _UxGT("Cambiar tarcheta")
+#define MSG_CHANGE_MEDIA                    _UxGT("Cambiar tarcheta")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z fuera")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Auto-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_bg.h

@@ -32,8 +32,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" Готов.")
-#define MSG_SD_INSERTED                     _UxGT("Картата е поставена")
+#define MSG_MEDIA_INSERTED                  _UxGT("Картата е поставена")
-#define MSG_SD_REMOVED                      _UxGT("Картата е извадена")
+#define MSG_MEDIA_REMOVED                   _UxGT("Картата е извадена")
 #define MSG_MAIN                            _UxGT("Меню")
 #define MSG_AUTOSTART                       _UxGT("Автостарт")
 #define MSG_DISABLE_STEPPERS                _UxGT("Изкл. двигатели")
@@ -114,8 +114,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Пауза")
 #define MSG_RESUME_PRINT                    _UxGT("Възобнови печата")
 #define MSG_STOP_PRINT                      _UxGT("Спри печата")
-#define MSG_CARD_MENU                       _UxGT("Меню карта")
+#define MSG_MEDIA_MENU                      _UxGT("Меню карта")
-#define MSG_NO_CARD                         _UxGT("Няма карта")
+#define MSG_NO_MEDIA                        _UxGT("Няма карта")
 #define MSG_DWELL                           _UxGT("Почивка...")
 #define MSG_USERWAIT                        _UxGT("Изчакване")
 #define MSG_PRINT_ABORTED                   _UxGT("Печатът е прекъснат")
@@ -131,8 +131,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Възврат  V")
 #define MSG_AUTORETRACT                     _UxGT("Автоoткат")
 #define MSG_FILAMENTCHANGE                  _UxGT("Смяна нишка")
-#define MSG_INIT_SDCARD                     _UxGT("Иниц. SD-Карта")
+#define MSG_INIT_MEDIA                      _UxGT("Иниц. SD-Карта")
-#define MSG_CHANGE_SDCARD                   _UxGT("Смяна SD-Карта")
+#define MSG_CHANGE_MEDIA                    _UxGT("Смяна SD-Карта")
 #define MSG_ZPROBE_OUT                      _UxGT("Z-сондата е извадена")
 #define MSG_ZPROBE_ZOFFSET                  _UxGT("Z Отстояние")
 #define MSG_BABYSTEP_X                      _UxGT("Министъпка X")

Marlin/src/lcd/language/language_ca.h

@@ -32,8 +32,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" preparada.")
-#define MSG_SD_INSERTED                     _UxGT("Targeta detectada.")
+#define MSG_MEDIA_INSERTED                  _UxGT("Targeta detectada.")
-#define MSG_SD_REMOVED                      _UxGT("Targeta extreta.")
+#define MSG_MEDIA_REMOVED                   _UxGT("Targeta extreta.")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops")
 #define MSG_MAIN                            _UxGT("Menú principal")
 #define MSG_AUTOSTART                       _UxGT("Inici automatic")
@@ -149,8 +149,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pausa impressio")
 #define MSG_RESUME_PRINT                    _UxGT("Repren impressio")
 #define MSG_STOP_PRINT                      _UxGT("Atura impressio.")
-#define MSG_CARD_MENU                       _UxGT("Imprimeix de SD")
+#define MSG_MEDIA_MENU                      _UxGT("Imprimeix de SD")
-#define MSG_NO_CARD                         _UxGT("No hi ha targeta")
+#define MSG_NO_MEDIA                        _UxGT("No hi ha targeta")
 #define MSG_DWELL                           _UxGT("En repos...")
 #define MSG_USERWAIT                        _UxGT("Esperant usuari..")
 #define MSG_PRINT_ABORTED                   _UxGT("Imp. cancelada")
@@ -166,8 +166,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("DesRet V")
 #define MSG_AUTORETRACT                     _UxGT("Auto retraccio")
 #define MSG_FILAMENTCHANGE                  _UxGT("Canvia filament")
-#define MSG_INIT_SDCARD                     _UxGT("Inicialitza SD")
+#define MSG_INIT_MEDIA                      _UxGT("Inicialitza SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Canvia SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Canvia SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z fora")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reinicia BLTouch")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST

Marlin/src/lcd/language/language_cz.h

@@ -42,8 +42,8 @@
 #define MSG_YES                             _UxGT("ANO")
 #define MSG_NO                              _UxGT("NE")
 #define MSG_BACK                            _UxGT("Zpět")
-#define MSG_SD_INSERTED                     _UxGT("Karta vložena")
+#define MSG_MEDIA_INSERTED                  _UxGT("Karta vložena")
-#define MSG_SD_REMOVED                      _UxGT("Karta vyjmuta")
+#define MSG_MEDIA_REMOVED                   _UxGT("Karta vyjmuta")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstopy") // max 8 znaku
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft Endstopy")
 #define MSG_MAIN                            _UxGT("Hlavní nabídka")
@@ -278,7 +278,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Načíst nastavení")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Obnovit výchozí")
 #define MSG_INIT_EEPROM                     _UxGT("Inic. EEPROM")
-#define MSG_SD_UPDATE                       _UxGT("Aktualizace z SD")
+#define MSG_MEDIA_UPDATE                    _UxGT("Aktualizace z SD")
 #define MSG_RESET_PRINTER                   _UxGT("Reset tiskárny")
 #define MSG_REFRESH                         _UxGT("Obnovit")
 #define MSG_WATCH                           _UxGT("Info obrazovka")
@@ -291,8 +291,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Obnovit tisk")
 #define MSG_STOP_PRINT                      _UxGT("Zastavit tisk")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Obnova výpadku")
-#define MSG_CARD_MENU                       _UxGT("Tisknout z SD")
+#define MSG_MEDIA_MENU                      _UxGT("Tisknout z SD")
-#define MSG_NO_CARD                         _UxGT("Žádná SD karta")
+#define MSG_NO_MEDIA                        _UxGT("Žádná SD karta")
 #define MSG_DWELL                           _UxGT("Uspáno...")
 #define MSG_USERWAIT                        _UxGT("Čekání na uživ...")
 #define MSG_PRINT_PAUSED                    _UxGT("Tisk pozastaven")
@@ -321,8 +321,8 @@
 #define MSG_FILAMENTUNLOAD                  _UxGT("Vysunout filament")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Vysunout vše")
 
-#define MSG_INIT_SDCARD                     _UxGT("Načíst SD kartu")
+#define MSG_INIT_MEDIA                      _UxGT("Načíst SD kartu")
-#define MSG_CHANGE_SDCARD                   _UxGT("Vyměnit SD kartu")
+#define MSG_CHANGE_MEDIA                    _UxGT("Vyměnit SD kartu")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z mimo podl")
 #define MSG_SKEW_FACTOR                     _UxGT("Faktor zkosení")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_da.h

@@ -33,8 +33,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" er klar")
-#define MSG_SD_INSERTED                     _UxGT("Kort isat")
+#define MSG_MEDIA_INSERTED                  _UxGT("Kort isat")
-#define MSG_SD_REMOVED                      _UxGT("Kort fjernet")
+#define MSG_MEDIA_REMOVED                   _UxGT("Kort fjernet")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Menu")
 #define MSG_AUTOSTART                       _UxGT("Autostart")
@@ -146,8 +146,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pause printet")
 #define MSG_RESUME_PRINT                    _UxGT("Forsæt printet")
 #define MSG_STOP_PRINT                      _UxGT("Stop printet")
-#define MSG_CARD_MENU                       _UxGT("Print fra SD")
+#define MSG_MEDIA_MENU                      _UxGT("Print fra SD")
-#define MSG_NO_CARD                         _UxGT("Intet SD kort")
+#define MSG_NO_MEDIA                        _UxGT("Intet SD kort")
 #define MSG_DWELL                           _UxGT("Dvale...")
 #define MSG_USERWAIT                        _UxGT("Venter på bruger...")
 #define MSG_PRINT_ABORTED                   _UxGT("Print annulleret")
@@ -163,8 +163,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Skift filament")
-#define MSG_INIT_SDCARD                     _UxGT("Init. SD card")
+#define MSG_INIT_MEDIA                      _UxGT("Init. SD card")
-#define MSG_CHANGE_SDCARD                   _UxGT("Skift SD kort")
+#define MSG_CHANGE_MEDIA                    _UxGT("Skift SD kort")
 #define MSG_ZPROBE_OUT                      _UxGT("Probe udenfor plade")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Selv-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_de.h

@@ -37,9 +37,9 @@
 #define MSG_YES                             _UxGT("JA")
 #define MSG_NO                              _UxGT("NEIN")
 #define MSG_BACK                            _UxGT("Zurück")
-#define MSG_SD_INSERTED                     _UxGT("SD-Karte erkannt")
+#define MSG_MEDIA_INSERTED                  _UxGT("SD-Karte erkannt")
-#define MSG_SD_REMOVED                      _UxGT("SD-Karte entfernt")
+#define MSG_MEDIA_REMOVED                   _UxGT("SD-Karte entfernt")
-#define MSG_SD_RELEASED                     _UxGT("SD-Karte freigeg.")
+#define MSG_MEDIA_RELEASED                  _UxGT("SD-Karte freigeg.")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstopp") // Max length 8 characters
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Software-Endstopp")
 #define MSG_MAIN                            _UxGT("Hauptmenü")
@@ -276,7 +276,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Konfig. laden")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Standardwerte laden")
 #define MSG_INIT_EEPROM                     _UxGT("Werkseinstellungen")
-#define MSG_SD_UPDATE                       _UxGT("SD-Firmware-Update")
+#define MSG_MEDIA_UPDATE                    _UxGT("SD-Firmware-Update")
 #define MSG_RESET_PRINTER                   _UxGT("Drucker neustarten")
 #define MSG_REFRESH                         _UxGT("Aktualisieren")
 #define MSG_WATCH                           _UxGT("Info")
@@ -294,8 +294,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("SD-Druck fortsetzen")
 #define MSG_STOP_PRINT                      _UxGT("SD-Druck abbrechen")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Wiederh. n. Stroma.")
-#define MSG_CARD_MENU                       _UxGT("Druck v. SD-Karte")
+#define MSG_MEDIA_MENU                      _UxGT("Druck v. SD-Karte")
-#define MSG_NO_CARD                         _UxGT("Keine SD-Karte")
+#define MSG_NO_MEDIA                        _UxGT("Keine SD-Karte")
 #define MSG_DWELL                           _UxGT("Warten...")
 #define MSG_USERWAIT                        _UxGT("Klick zum Fortsetzen")
 #define MSG_PRINT_PAUSED                    _UxGT("Druck pausiert...")
@@ -323,9 +323,9 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Filament laden")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Filament entladen")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Alles entladen")
-#define MSG_INIT_SDCARD                     _UxGT("SD-Karte initial.")  // Manually initialize the SD-card via user interface
+#define MSG_INIT_MEDIA                      _UxGT("SD-Karte initial.")  // Manually initialize the SD-card via user interface
-#define MSG_CHANGE_SDCARD                   _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
+#define MSG_CHANGE_MEDIA                    _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
-#define MSG_RELEASE_SDCARD                  _UxGT("SD-Karte freigeben") // if Marlin gets confused - M22
+#define MSG_RELEASE_MEDIA                   _UxGT("SD-Karte freigeben") // if Marlin gets confused - M22
 #define MSG_ZPROBE_OUT                      _UxGT("Z-Sonde außerhalb")
 #define MSG_SKEW_FACTOR                     _UxGT("Korrekturfaktor")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_el-gr.h

@@ -33,8 +33,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" έτοιμο.")
-#define MSG_SD_INSERTED                     _UxGT("Εισαγωγή κάρτας")
+#define MSG_MEDIA_INSERTED                  _UxGT("Εισαγωγή κάρτας")
-#define MSG_SD_REMOVED                      _UxGT("Αφαίρεση κάρτας")
+#define MSG_MEDIA_REMOVED                   _UxGT("Αφαίρεση κάρτας")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Βασική Οθόνη")
 #define MSG_AUTOSTART                       _UxGT("Αυτόματη εκκίνηση")
@@ -144,8 +144,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Παύση εκτύπωσης")
 #define MSG_RESUME_PRINT                    _UxGT("Συνέχιση εκτύπωσης")
 #define MSG_STOP_PRINT                      _UxGT("Διακοπή εκτύπωσης")
-#define MSG_CARD_MENU                       _UxGT("Εκτύπωση από SD")
+#define MSG_MEDIA_MENU                      _UxGT("Εκτύπωση από SD")
-#define MSG_NO_CARD                         _UxGT("Δεν βρέθηκε SD")
+#define MSG_NO_MEDIA                        _UxGT("Δεν βρέθηκε SD")
 #define MSG_DWELL                           _UxGT("Αναστολή λειτουργίας…")
 #define MSG_USERWAIT                        _UxGT("Αναμονή για χρήστη…")
 #define MSG_PRINT_ABORTED                   _UxGT("Διακόπτεται η εκτύπωση")
@@ -161,8 +161,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
 #define MSG_AUTORETRACT                     _UxGT("Αυτόματη ανάσυρση")
 #define MSG_FILAMENTCHANGE                  _UxGT("Αλλαγή νήματος")
-#define MSG_INIT_SDCARD                     _UxGT("Προετοιμασία κάρτας SD")
+#define MSG_INIT_MEDIA                      _UxGT("Προετοιμασία κάρτας SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Αλλαγή κάρτας SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Αλλαγή κάρτας SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Διερεύνηση Z εκτός κλίνης")
 #define MSG_YX_UNHOMED                      _UxGT("Επαναφορά Χ/Υ πριν από Ζ")
 #define MSG_XYZ_UNHOMED                     _UxGT("Επαναφορά ΧΥΖ πρώτα")

Marlin/src/lcd/language/language_el.h

@@ -33,8 +33,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" έτοιμο.")
-#define MSG_SD_INSERTED                     _UxGT("Εισαγωγή κάρτας")
+#define MSG_MEDIA_INSERTED                  _UxGT("Εισαγωγή κάρτας")
-#define MSG_SD_REMOVED                      _UxGT("Αφαίρεση κάρτας")
+#define MSG_MEDIA_REMOVED                   _UxGT("Αφαίρεση κάρτας")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Βασική Οθόνη")
 #define MSG_AUTOSTART                       _UxGT("Αυτόματη εκκίνηση")
@@ -144,8 +144,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Παύση εκτύπωσης")
 #define MSG_RESUME_PRINT                    _UxGT("Συνέχιση εκτύπωσης")
 #define MSG_STOP_PRINT                      _UxGT("Διακοπή εκτύπωσης")
-#define MSG_CARD_MENU                       _UxGT("Εκτύπωση από SD")
+#define MSG_MEDIA_MENU                      _UxGT("Εκτύπωση από SD")
-#define MSG_NO_CARD                         _UxGT("Δεν βρέθηκε SD")
+#define MSG_NO_MEDIA                        _UxGT("Δεν βρέθηκε SD")
 #define MSG_DWELL                           _UxGT("Αναστολή λειτουργίας")
 #define MSG_USERWAIT                        _UxGT("Αναμονή για χρήστη")
 #define MSG_PRINT_ABORTED                   _UxGT("Διακόπτεται η εκτύπωση") //SHORTEN
@@ -161,8 +161,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
 #define MSG_AUTORETRACT                     _UxGT("Αυτόματη ανάσυρση")
 #define MSG_FILAMENTCHANGE                  _UxGT("Αλλαγή νήματος")
-#define MSG_INIT_SDCARD                     _UxGT("Προετοιμασία κάρτας SD")  //SHORTEN
+#define MSG_INIT_MEDIA                      _UxGT("Προετοιμασία κάρτας SD")  //SHORTEN
-#define MSG_CHANGE_SDCARD                   _UxGT("Αλλαγή κάρτας SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Αλλαγή κάρτας SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Διερεύνηση Z εκτός Επ.Εκτύπωσης") //SHORTEN
 #define MSG_YX_UNHOMED                      _UxGT("Επαναφορά Χ/Υ πριν από Ζ") //SHORTEN
 #define MSG_XYZ_UNHOMED                     _UxGT("Επαναφορά ΧΥΖ πρώτα")

Marlin/src/lcd/language/language_en.h

@@ -61,14 +61,14 @@
 #ifndef MSG_BACK
   #define MSG_BACK                            _UxGT("Back")
 #endif
-#ifndef MSG_SD_INSERTED
+#ifndef MSG_MEDIA_INSERTED
-  #define MSG_SD_INSERTED                     _UxGT("Card Inserted")
+  #define MSG_MEDIA_INSERTED                  _UxGT("Media Inserted")
 #endif
-#ifndef MSG_SD_REMOVED
+#ifndef MSG_MEDIA_REMOVED
-  #define MSG_SD_REMOVED                      _UxGT("Card Removed")
+  #define MSG_MEDIA_REMOVED                   _UxGT("Media Removed")
 #endif
-#ifndef MSG_SD_RELEASED
+#ifndef MSG_MEDIA_RELEASED
-  #define MSG_SD_RELEASED                     _UxGT("Card Released")
+  #define MSG_MEDIA_RELEASED                  _UxGT("Media Released")
 #endif
 #ifndef MSG_LCD_ENDSTOPS
   #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
@@ -765,8 +765,8 @@
 #ifndef MSG_INIT_EEPROM
   #define MSG_INIT_EEPROM                     _UxGT("Initialize EEPROM")
 #endif
-#ifndef MSG_SD_UPDATE
+#ifndef MSG_MEDIA_UPDATE
-  #define MSG_SD_UPDATE                       _UxGT("SD Update")
+  #define MSG_MEDIA_UPDATE                    _UxGT("Media Update")
 #endif
 #ifndef MSG_RESET_PRINTER
   #define MSG_RESET_PRINTER                   _UxGT("Reset Printer")
@@ -819,11 +819,11 @@
 #ifndef MSG_OUTAGE_RECOVERY
   #define MSG_OUTAGE_RECOVERY                 _UxGT("Outage Recovery")
 #endif
-#ifndef MSG_CARD_MENU
+#ifndef MSG_MEDIA_MENU
-  #define MSG_CARD_MENU                       _UxGT("Print from SD")
+  #define MSG_MEDIA_MENU                      _UxGT("Print from Media")
 #endif
-#ifndef MSG_NO_CARD
+#ifndef MSG_NO_MEDIA
-  #define MSG_NO_CARD                         _UxGT("No SD Card")
+  #define MSG_NO_MEDIA                        _UxGT("No Media")
 #endif
 #ifndef MSG_DWELL
   #define MSG_DWELL                           _UxGT("Sleep...")
@@ -909,14 +909,14 @@
 #ifndef MSG_FILAMENTUNLOAD_ALL
   #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Unload All")
 #endif
-#ifndef MSG_INIT_SDCARD
+#ifndef MSG_INIT_MEDIA
-  #define MSG_INIT_SDCARD                     _UxGT("Init. SD Card")
+  #define MSG_INIT_MEDIA                      _UxGT("Init. Media")
 #endif
-#ifndef MSG_CHANGE_SDCARD
+#ifndef MSG_CHANGE_MEDIA
-  #define MSG_CHANGE_SDCARD                   _UxGT("Change SD Card")
+  #define MSG_CHANGE_MEDIA                    _UxGT("Change Media")
 #endif
-#ifndef MSG_RELEASE_SDCARD
+#ifndef MSG_RELEASE_MEDIA
-  #define MSG_RELEASE_SDCARD                  _UxGT("Release SD Card")
+  #define MSG_RELEASE_MEDIA                   _UxGT("Release Media")
 #endif
 #ifndef MSG_ZPROBE_OUT
   #define MSG_ZPROBE_OUT                      _UxGT("Z Probe Past Bed")

Marlin/src/lcd/language/language_es.h

@@ -34,8 +34,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" lista.")
 #define MSG_BACK                            _UxGT("Atrás")
-#define MSG_SD_INSERTED                     _UxGT("Tarjeta colocada")
+#define MSG_MEDIA_INSERTED                  _UxGT("Tarjeta colocada")
-#define MSG_SD_REMOVED                      _UxGT("Tarjeta retirada")
+#define MSG_MEDIA_REMOVED                   _UxGT("Tarjeta retirada")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Menú principal")
 #define MSG_AUTOSTART                       _UxGT("Inicio automático")
@@ -143,8 +143,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pausar impresión")
 #define MSG_RESUME_PRINT                    _UxGT("Reanudar impresión")
 #define MSG_STOP_PRINT                      _UxGT("Detener impresión")
-#define MSG_CARD_MENU                       _UxGT("Menú de SD")
+#define MSG_MEDIA_MENU                      _UxGT("Menú de SD")
-#define MSG_NO_CARD                         _UxGT("No hay tarjeta SD")
+#define MSG_NO_MEDIA                        _UxGT("No hay tarjeta SD")
 #define MSG_DWELL                           _UxGT("Reposo...")
 #define MSG_USERWAIT                        _UxGT("Esperando órdenes")
 #define MSG_PRINT_ABORTED                   _UxGT("Impresión cancelada")
@@ -160,8 +160,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("DesRet V")
 #define MSG_AUTORETRACT                     _UxGT("Retracción Auto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Cambiar filamento")
-#define MSG_INIT_SDCARD                     _UxGT("Iniciando tarjeta")
+#define MSG_INIT_MEDIA                      _UxGT("Iniciando tarjeta")
-#define MSG_CHANGE_SDCARD                   _UxGT("Cambiar tarjeta")
+#define MSG_CHANGE_MEDIA                    _UxGT("Cambiar tarjeta")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z fuera")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Auto-Prueba")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reiniciar BLTouch")

Marlin/src/lcd/language/language_eu.h

@@ -34,8 +34,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" prest.")
 #define MSG_BACK                            _UxGT("Atzera")
-#define MSG_SD_INSERTED                     _UxGT("Txartela sartuta")
+#define MSG_MEDIA_INSERTED                  _UxGT("Txartela sartuta")
-#define MSG_SD_REMOVED                      _UxGT("Txartela kenduta")
+#define MSG_MEDIA_REMOVED                   _UxGT("Txartela kenduta")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Menu nagusia")
 #define MSG_AUTOSTART                       _UxGT("Auto hasiera")
@@ -246,8 +246,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pausatu inprimak.")
 #define MSG_RESUME_PRINT                    _UxGT("Jarraitu inprima.")
 #define MSG_STOP_PRINT                      _UxGT("Gelditu inprima.")
-#define MSG_CARD_MENU                       _UxGT("SD-tik inprimatu")
+#define MSG_MEDIA_MENU                      _UxGT("SD-tik inprimatu")
-#define MSG_NO_CARD                         _UxGT("Ez dago SD-rik")
+#define MSG_NO_MEDIA                        _UxGT("Ez dago SD-rik")
 #define MSG_DWELL                           _UxGT("Lo egin...")
 #define MSG_USERWAIT                        _UxGT("Aginduak zain...")
 #define MSG_PRINT_PAUSED                    _UxGT("Inprim. geldi.")
@@ -268,8 +268,8 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Harizpia kargatu")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Harizpia deskargatu")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Erabat deskargatu")
-#define MSG_INIT_SDCARD                     _UxGT("Hasieratu SD-a")
+#define MSG_INIT_MEDIA                      _UxGT("Hasieratu SD-a")
-#define MSG_CHANGE_SDCARD                   _UxGT("Aldatu txartela")
+#define MSG_CHANGE_MEDIA                    _UxGT("Aldatu txartela")
 #define MSG_ZPROBE_OUT                      _UxGT("Z zunda kanpora")
 #define MSG_SKEW_FACTOR                     _UxGT("Okertze faktorea")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_fi.h

@@ -33,8 +33,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" valmis.")
-#define MSG_SD_INSERTED                     _UxGT("Kortti asetettu")
+#define MSG_MEDIA_INSERTED                  _UxGT("Kortti asetettu")
-#define MSG_SD_REMOVED                      _UxGT("Kortti poistettu")
+#define MSG_MEDIA_REMOVED                   _UxGT("Kortti poistettu")
 #define MSG_MAIN                            _UxGT("Palaa")
 #define MSG_AUTOSTART                       _UxGT("Automaatti")
 #define MSG_DISABLE_STEPPERS                _UxGT("Vapauta moottorit")
@@ -136,8 +136,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Keskeytä tulostus")
 #define MSG_RESUME_PRINT                    _UxGT("Jatka tulostusta")
 #define MSG_STOP_PRINT                      _UxGT("Pysäytä tulostus")
-#define MSG_CARD_MENU                       _UxGT("Korttivalikko")
+#define MSG_MEDIA_MENU                      _UxGT("Korttivalikko")
-#define MSG_NO_CARD                         _UxGT("Ei korttia")
+#define MSG_NO_MEDIA                        _UxGT("Ei korttia")
 #define MSG_DWELL                           _UxGT("Nukkumassa...")
 #define MSG_USERWAIT                        _UxGT("Odotet. valintaa")
 #define MSG_PRINT_ABORTED                   _UxGT("Print aborted")
@@ -153,8 +153,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
 #define MSG_AUTORETRACT                     _UxGT("AutoVeto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Change filament")
-#define MSG_INIT_SDCARD                     _UxGT("Init. SD-Card")
+#define MSG_INIT_MEDIA                      _UxGT("Init. SD-Card")
-#define MSG_CHANGE_SDCARD                   _UxGT("Change SD-Card")
+#define MSG_CHANGE_MEDIA                    _UxGT("Change SD-Card")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe out. bed")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_FIRST                           _UxGT("first")

Marlin/src/lcd/language/language_fr.h

@@ -36,9 +36,9 @@
 #define MSG_YES                             _UxGT("Oui")
 #define MSG_NO                              _UxGT("Non")
 #define MSG_BACK                            _UxGT("Retour")
-#define MSG_SD_INSERTED                     _UxGT("Carte insérée")
+#define MSG_MEDIA_INSERTED                  _UxGT("Carte insérée")
-#define MSG_SD_REMOVED                      _UxGT("Carte retirée")
+#define MSG_MEDIA_REMOVED                   _UxGT("Carte retirée")
-#define MSG_SD_RELEASED                     _UxGT("Carte libérée")
+#define MSG_MEDIA_RELEASED                  _UxGT("Carte libérée")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Butées")
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Butées SW")
 #define MSG_MAIN                            _UxGT("Menu principal")
@@ -273,7 +273,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Charger config.")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Restaurer défauts")
 #define MSG_INIT_EEPROM                     _UxGT("Initialiser EEPROM")
-#define MSG_SD_UPDATE                       _UxGT("MaJ Firmware SD")
+#define MSG_MEDIA_UPDATE                    _UxGT("MaJ Firmware SD")
 #define MSG_RESET_PRINTER                   _UxGT("RaZ imprimante")
 #define MSG_REFRESH                         _UxGT("Actualiser")
 #define MSG_WATCH                           _UxGT("Surveiller")
@@ -291,8 +291,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Reprendre impr.")
 #define MSG_STOP_PRINT                      _UxGT("Arrêter impr.")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Récupér. coupure")
-#define MSG_CARD_MENU                       _UxGT("Impression SD")
+#define MSG_MEDIA_MENU                      _UxGT("Impression SD")
-#define MSG_NO_CARD                         _UxGT("Pas de carte")
+#define MSG_NO_MEDIA                        _UxGT("Pas de carte")
 #define MSG_DWELL                           _UxGT("Repos...")
 #define MSG_USERWAIT                        _UxGT("Attente utilis.")
 #define MSG_PRINT_PAUSED                    _UxGT("Impr. en pause")
@@ -321,9 +321,9 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Charger filament")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Retrait filament")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Décharger tout")
-#define MSG_INIT_SDCARD                     _UxGT("Init. la carte SD")
+#define MSG_INIT_MEDIA                      _UxGT("Init. la carte SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Actualiser carte SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Actualiser carte SD")
-#define MSG_RELEASE_SDCARD                  _UxGT("Retirer carte SD")
+#define MSG_RELEASE_MEDIA                   _UxGT("Retirer carte SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonde Z hors lit")
 #define MSG_SKEW_FACTOR                     _UxGT("Facteur écart")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_gl.h

@@ -33,8 +33,8 @@
 #define NOT_EXTENDED_ISO10646_1_5X7
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" lista.")
-#define MSG_SD_INSERTED                     _UxGT("Tarxeta inserida")
+#define MSG_MEDIA_INSERTED                  _UxGT("Tarxeta inserida")
-#define MSG_SD_REMOVED                      _UxGT("Tarxeta retirada")
+#define MSG_MEDIA_REMOVED                   _UxGT("Tarxeta retirada")
 #define MSG_LCD_ENDSTOPS                    _UxGT("FinCarro")
 #define MSG_MAIN                            _UxGT("Menu principal")
 #define MSG_AUTOSTART                       _UxGT("Autoarranque")
@@ -145,8 +145,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pausar impres.")
 #define MSG_RESUME_PRINT                    _UxGT("Seguir impres.")
 #define MSG_STOP_PRINT                      _UxGT("Deter impres.")
-#define MSG_CARD_MENU                       _UxGT("Tarxeta SD")
+#define MSG_MEDIA_MENU                      _UxGT("Tarxeta SD")
-#define MSG_NO_CARD                         _UxGT("Sen tarxeta SD")
+#define MSG_NO_MEDIA                        _UxGT("Sen tarxeta SD")
 #define MSG_DWELL                           _UxGT("En repouso...")
 #define MSG_USERWAIT                        _UxGT("A espera...")
 #define MSG_PRINT_ABORTED                   _UxGT("Impre. cancelada")
@@ -162,8 +162,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Recuperacion V")
 #define MSG_AUTORETRACT                     _UxGT("Retraccion auto.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Cambiar filamen.")
-#define MSG_INIT_SDCARD                     _UxGT("Iniciando SD")
+#define MSG_INIT_MEDIA                      _UxGT("Iniciando SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Cambiar SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Cambiar SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda-Z sen cama")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_BLTOUCH_SELFTEST                _UxGT("Comprobar BLTouch")

Marlin/src/lcd/language/language_hr.h

@@ -33,8 +33,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" spreman.")
-#define MSG_SD_INSERTED                     _UxGT("SD kartica umetnuta")
+#define MSG_MEDIA_INSERTED                  _UxGT("SD kartica umetnuta")
-#define MSG_SD_REMOVED                      _UxGT("SD kartica uklonjena")
+#define MSG_MEDIA_REMOVED                   _UxGT("SD kartica uklonjena")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Main")
 #define MSG_AUTOSTART                       _UxGT("Auto pokretanje")
@@ -145,8 +145,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pauziraj print")
 #define MSG_RESUME_PRINT                    _UxGT("Nastavi print")
 #define MSG_STOP_PRINT                      _UxGT("Zaustavi print")
-#define MSG_CARD_MENU                       _UxGT("Printaj s SD kartice")
+#define MSG_MEDIA_MENU                      _UxGT("Printaj s SD kartice")
-#define MSG_NO_CARD                         _UxGT("Nema SD kartice")
+#define MSG_NO_MEDIA                        _UxGT("Nema SD kartice")
 #define MSG_DWELL                           _UxGT("Sleep...")
 #define MSG_USERWAIT                        _UxGT("Čekaj korisnika...")
 #define MSG_PRINT_ABORTED                   _UxGT("Print otkazan")
@@ -162,8 +162,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Promijeni filament")
-#define MSG_INIT_SDCARD                     _UxGT("Init. SD karticu")
+#define MSG_INIT_MEDIA                      _UxGT("Init. SD karticu")
-#define MSG_CHANGE_SDCARD                   _UxGT("Promijeni SD karticu")
+#define MSG_CHANGE_MEDIA                    _UxGT("Promijeni SD karticu")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe out. bed")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_it.h

@@ -35,9 +35,9 @@
 #define MSG_YES                             _UxGT("SI")
 #define MSG_NO                              _UxGT("NO")
 #define MSG_BACK                            _UxGT("Indietro")
-#define MSG_SD_INSERTED                     _UxGT("SD Card inserita")
+#define MSG_MEDIA_INSERTED                  _UxGT("SD Card inserita")
-#define MSG_SD_REMOVED                      _UxGT("SD Card rimossa")
+#define MSG_MEDIA_REMOVED                   _UxGT("SD Card rimossa")
-#define MSG_SD_RELEASED                     _UxGT("SD Card rilasciata")
+#define MSG_MEDIA_RELEASED                  _UxGT("SD Card rilasciata")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Finecor.") // Max 8 caratteri
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Finecorsa Soft")
 #define MSG_MAIN                            _UxGT("Menu principale")
@@ -274,7 +274,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Carica impostazioni")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Ripristina imp.")
 #define MSG_INIT_EEPROM                     _UxGT("Inizializza EEPROM")
-#define MSG_SD_UPDATE                       _UxGT("Aggiorna SD")
+#define MSG_MEDIA_UPDATE                    _UxGT("Aggiorna SD")
 #define MSG_RESET_PRINTER                   _UxGT("Resetta stampante")
 #define MSG_REFRESH                         _UxGT("Aggiorna")
 #define MSG_WATCH                           _UxGT("Schermata info")
@@ -292,8 +292,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Riprendi stampa")
 #define MSG_STOP_PRINT                      _UxGT("Arresta stampa")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Ripresa da PowerLoss")
-#define MSG_CARD_MENU                       _UxGT("Stampa da SD")
+#define MSG_MEDIA_MENU                      _UxGT("Stampa da SD")
-#define MSG_NO_CARD                         _UxGT("SD non presente")
+#define MSG_NO_MEDIA                        _UxGT("SD non presente")
 #define MSG_DWELL                           _UxGT("Sospensione...")
 #define MSG_USERWAIT                        _UxGT("Premi tasto..")
 #define MSG_PRINT_PAUSED                    _UxGT("Stampa sospesa")
@@ -322,9 +322,9 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Carica filamento")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Rimuovi filamento")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Rimuovi tutto")
-#define MSG_INIT_SDCARD                     _UxGT("Iniz. SD card")
+#define MSG_INIT_MEDIA                      _UxGT("Iniz. SD card")
-#define MSG_CHANGE_SDCARD                   _UxGT("Cambia SD card")
+#define MSG_CHANGE_MEDIA                    _UxGT("Cambia SD card")
-#define MSG_RELEASE_SDCARD                  _UxGT("Rilascia SD card")
+#define MSG_RELEASE_MEDIA                   _UxGT("Rilascia SD card")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe fuori piatto")
 #define MSG_SKEW_FACTOR                     _UxGT("Fattore distorsione")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_jp-kana.h

@@ -38,8 +38,8 @@
 
 // 片仮名表示定義
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" ready.")
-#define MSG_SD_INSERTED                     _UxGT("カードガソウニュウサレマシタ")        // "Card inserted"
+#define MSG_MEDIA_INSERTED                  _UxGT("カードガソウニュウサレマシタ")        // "Card inserted"
-#define MSG_SD_REMOVED                      _UxGT("カードガアリマセン")               // "Card removed"
+#define MSG_MEDIA_REMOVED                   _UxGT("カードガアリマセン")               // "Card removed"
 #define MSG_LCD_ENDSTOPS                    _UxGT("エンドストップ")                  // "Endstops" // Max length 8 characters
 #define MSG_MAIN                            _UxGT("メイン")                       // "Main"
 #define MSG_AUTOSTART                       _UxGT("ジドウカイシ")                   // "Autostart"
@@ -139,8 +139,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("イチジテイシ")                  // "Pause print"
 #define MSG_RESUME_PRINT                    _UxGT("プリントサイカイ")                // "Resume print"
 #define MSG_STOP_PRINT                      _UxGT("プリントテイシ")                 // "Stop print"
-#define MSG_CARD_MENU                       _UxGT("SDカードカラプリント")            // "Print from SD"
+#define MSG_MEDIA_MENU                      _UxGT("SDカードカラプリント")            // "Print from SD"
-#define MSG_NO_CARD                         _UxGT("SDカードガアリマセン")            // "No SD card"
+#define MSG_NO_MEDIA                        _UxGT("SDカードガアリマセン")            // "No SD card"
 #define MSG_DWELL                           _UxGT("キュウシ")                     // "Sleep..."
 #define MSG_USERWAIT                        _UxGT("シバラクオマチクダサイ")           // "Wait for user..."
 #define MSG_PRINT_ABORTED                   _UxGT("プリントガチュウシサレマシタ")       // "Print aborted"
@@ -156,8 +156,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("ホショウソクド mm/s")            // "UnRet  V"
 #define MSG_AUTORETRACT                     _UxGT("ジドウヒキコミ")                 // "AutoRetr."
 #define MSG_FILAMENTCHANGE                  _UxGT("フィラメントコウカン")              // "Change filament"
-#define MSG_INIT_SDCARD                     _UxGT("SDカードサイヨミコミ")             // "Init. SD card"
+#define MSG_INIT_MEDIA                      _UxGT("SDカードサイヨミコミ")             // "Init. SD card"
-#define MSG_CHANGE_SDCARD                   _UxGT("SDカードコウカン")               // "Change SD card"
+#define MSG_CHANGE_MEDIA                    _UxGT("SDカードコウカン")               // "Change SD card"
 #define MSG_ZPROBE_OUT                      _UxGT("Zプローブ ベッドガイ")            // "Z probe out. bed"
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch ジコシンダン")          // "BLTouch Self-Test"
 #define MSG_BLTOUCH_RESET                   _UxGT("BLTouch リセット")             // "Reset BLTouch"

Marlin/src/lcd/language/language_ko_KR.h

@@ -33,8 +33,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" 준비.")
 #define MSG_BACK                            _UxGT("뒤로")
-#define MSG_SD_INSERTED                     _UxGT("카드 삽입됨")
+#define MSG_MEDIA_INSERTED                  _UxGT("카드 삽입됨")
-#define MSG_SD_REMOVED                      _UxGT("카드 제거됨")
+#define MSG_MEDIA_REMOVED                   _UxGT("카드 제거됨")
 #define MSG_LCD_ENDSTOPS                    _UxGT("엔드스탑")
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("소프트 엔드스탑")
 #define MSG_MAIN                            _UxGT("뒤로")
@@ -259,8 +259,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("재시작")
 #define MSG_STOP_PRINT                      _UxGT("출력중지")
 //#define MSG_OUTAGE_RECOVERY               _UxGT("Outage Recovery")
-#define MSG_CARD_MENU                       _UxGT("SD 카드출력")
+#define MSG_MEDIA_MENU                      _UxGT("SD 카드출력")
-#define MSG_NO_CARD                         _UxGT("SD 카드없음")
+#define MSG_NO_MEDIA                        _UxGT("SD 카드없음")
 #define MSG_DWELL                           _UxGT("슬립모드...")
 //#define MSG_USERWAIT                      _UxGT("Click to resume...")
 #define MSG_PRINT_PAUSED                    _UxGT("일시 정지됨")
@@ -282,8 +282,8 @@
 //#define MSG_FILAMENTLOAD                  _UxGT("Load filament")
 //#define MSG_FILAMENTUNLOAD                _UxGT("Unload filament")
 //#define MSG_FILAMENTUNLOAD_ALL            _UxGT("Unload All")
-//#define MSG_INIT_SDCARD                   _UxGT("Init. SD card")
+//#define MSG_INIT_MEDIA                    _UxGT("Init. SD card")
-//#define MSG_CHANGE_SDCARD                 _UxGT("Change SD card")
+//#define MSG_CHANGE_MEDIA                  _UxGT("Change SD card")
 //#define MSG_ZPROBE_OUT                    _UxGT("Z Probe past bed")
 //#define MSG_SKEW_FACTOR                   _UxGT("Skew Factor")
 //#define MSG_BLTOUCH                       _UxGT("BLTouch")

Marlin/src/lcd/language/language_nl.h

@@ -34,8 +34,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" gereed.")
 #define MSG_BACK                            _UxGT("Terug")
-#define MSG_SD_INSERTED                     _UxGT("Kaart ingestoken")
+#define MSG_MEDIA_INSERTED                  _UxGT("Kaart ingestoken")
-#define MSG_SD_REMOVED                      _UxGT("Kaart verwijderd")
+#define MSG_MEDIA_REMOVED                   _UxGT("Kaart verwijderd")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstops") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Hoofdmenu")
 #define MSG_AUTOSTART                       _UxGT("Autostart")
@@ -154,8 +154,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Print pauzeren")
 #define MSG_RESUME_PRINT                    _UxGT("Print hervatten")
 #define MSG_STOP_PRINT                      _UxGT("Print stoppen")
-#define MSG_CARD_MENU                       _UxGT("Print van SD")
+#define MSG_MEDIA_MENU                      _UxGT("Print van SD")
-#define MSG_NO_CARD                         _UxGT("Geen SD kaart")
+#define MSG_NO_MEDIA                        _UxGT("Geen SD kaart")
 #define MSG_DWELL                           _UxGT("Slapen...")
 #define MSG_USERWAIT                        _UxGT("Wachten...")
 #define MSG_PRINT_ABORTED                   _UxGT("Print afgebroken")
@@ -171,8 +171,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  F")
 #define MSG_AUTORETRACT                     _UxGT("AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Verv. Filament")
-#define MSG_INIT_SDCARD                     _UxGT("Init. SD kaart")
+#define MSG_INIT_MEDIA                      _UxGT("Init. SD kaart")
-#define MSG_CHANGE_SDCARD                   _UxGT("Verv. SD Kaart")
+#define MSG_CHANGE_MEDIA                    _UxGT("Verv. SD Kaart")
 #define MSG_ZPROBE_OUT                      _UxGT("Z probe uit. bed")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Zelf-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_pl.h

@@ -30,8 +30,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" gotowy.")
-#define MSG_SD_INSERTED                     _UxGT("Karta włożona")
+#define MSG_MEDIA_INSERTED                  _UxGT("Karta włożona")
-#define MSG_SD_REMOVED                      _UxGT("Karta usunięta")
+#define MSG_MEDIA_REMOVED                   _UxGT("Karta usunięta")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Kranców.") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Menu główne")
 #define MSG_AUTOSTART                       _UxGT("Autostart")
@@ -144,8 +144,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pauza")
 #define MSG_RESUME_PRINT                    _UxGT("Wznowienie")
 #define MSG_STOP_PRINT                      _UxGT("Stop")
-#define MSG_CARD_MENU                       _UxGT("Karta SD")
+#define MSG_MEDIA_MENU                      _UxGT("Karta SD")
-#define MSG_NO_CARD                         _UxGT("Brak karty")
+#define MSG_NO_MEDIA                        _UxGT("Brak karty")
 #define MSG_DWELL                           _UxGT("Uśpij...")
 #define MSG_USERWAIT                        _UxGT("Oczekiwanie...")
 #define MSG_PRINT_ABORTED                   _UxGT("Druk przerwany")
@@ -161,8 +161,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("Cof. wycof.  V")
 #define MSG_AUTORETRACT                     _UxGT("Auto. wycofanie")
 #define MSG_FILAMENTCHANGE                  _UxGT("Zmień filament")
-#define MSG_INIT_SDCARD                     _UxGT("Inicjal. karty SD")
+#define MSG_INIT_MEDIA                      _UxGT("Inicjal. karty SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Zmiana karty SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Zmiana karty SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z za stołem")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
 #define MSG_BLTOUCH_RESET                   _UxGT("Reset BLTouch")

Marlin/src/lcd/language/language_pt-br.h

@@ -38,8 +38,8 @@
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" pronto.")
 
 #define MSG_BACK                            _UxGT("Voltar")
-#define MSG_SD_INSERTED                     _UxGT("Cartão inserido")
+#define MSG_MEDIA_INSERTED                  _UxGT("Cartão inserido")
-#define MSG_SD_REMOVED                      _UxGT("Cartão removido")
+#define MSG_MEDIA_REMOVED                   _UxGT("Cartão removido")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Fins de curso")
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft Fins curso")
 #define MSG_MAIN                            _UxGT("Menu principal")
@@ -261,7 +261,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Ler Configuração")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Restauro seguro")
 #define MSG_INIT_EEPROM                     _UxGT("Iniciar EEPROM")
-#define MSG_SD_UPDATE                       _UxGT("Atualiz. SD")
+#define MSG_MEDIA_UPDATE                    _UxGT("Atualiz. SD")
 #define MSG_RESET_PRINTER                   _UxGT("Resetar Impressora")
 #define MSG_REFRESH                         _UxGT("Atualização")
 #define MSG_WATCH                           _UxGT("Informações")
@@ -271,8 +271,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Resumir impressão")
 #define MSG_STOP_PRINT                      _UxGT("Parar impressão")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Recuperar Impressão")
-#define MSG_CARD_MENU                       _UxGT("Imprimir do SD")
+#define MSG_MEDIA_MENU                      _UxGT("Imprimir do SD")
-#define MSG_NO_CARD                         _UxGT("Sem cartão SD")
+#define MSG_NO_MEDIA                        _UxGT("Sem cartão SD")
 #define MSG_DWELL                           _UxGT("Dormindo...")
 #define MSG_USERWAIT                        _UxGT("Clique para retomar")
 #define MSG_PRINT_PAUSED                    _UxGT("Impressão Pausada")
@@ -299,8 +299,8 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Carregar Filamento")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Descarreg. Filamento")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Descarregar Todos")
-#define MSG_INIT_SDCARD                     _UxGT("Iniciar SD")
+#define MSG_INIT_MEDIA                      _UxGT("Iniciar SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Trocar SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Trocar SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda fora da mesa")
 #define MSG_SKEW_FACTOR                     _UxGT("Fator de Cisalho")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_pt.h

@@ -34,8 +34,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" pronta.")
-#define MSG_SD_INSERTED                     _UxGT("Cartão inserido")
+#define MSG_MEDIA_INSERTED                  _UxGT("Cartão inserido")
-#define MSG_SD_REMOVED                      _UxGT("Cartão removido")
+#define MSG_MEDIA_REMOVED                   _UxGT("Cartão removido")
 #define MSG_MAIN                            _UxGT("Menu principal")
 #define MSG_AUTOSTART                       _UxGT("Autostart")
 #define MSG_DISABLE_STEPPERS                _UxGT("Desactivar motores")
@@ -142,8 +142,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pausar impressão")
 #define MSG_RESUME_PRINT                    _UxGT("Retomar impressão")
 #define MSG_STOP_PRINT                      _UxGT("Parar impressão")
-#define MSG_CARD_MENU                       _UxGT("Imprimir do SD")
+#define MSG_MEDIA_MENU                      _UxGT("Imprimir do SD")
-#define MSG_NO_CARD                         _UxGT("Sem cartão SD")
+#define MSG_NO_MEDIA                        _UxGT("Sem cartão SD")
 #define MSG_DWELL                           _UxGT("Em espera...")
 #define MSG_USERWAIT                        _UxGT("Á espera de ordem")
 #define MSG_PRINT_ABORTED                   _UxGT("Impressão cancelada")
@@ -159,8 +159,8 @@
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT(" DesRet  V")
 #define MSG_AUTORETRACT                     _UxGT(" AutoRetr.")
 #define MSG_FILAMENTCHANGE                  _UxGT("Trocar filamento")
-#define MSG_INIT_SDCARD                     _UxGT("Inici. cartão SD")
+#define MSG_INIT_MEDIA                      _UxGT("Inici. cartão SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Trocar cartão SD")
+#define MSG_CHANGE_MEDIA                    _UxGT("Trocar cartão SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Sensor fora/base")
 #define MSG_HOME                            _UxGT("Home")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_FIRST                           _UxGT("first")

Marlin/src/lcd/language/language_ru.h

@@ -34,9 +34,9 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" готов.")
 #define MSG_BACK                            _UxGT("Назад")
-#define MSG_SD_INSERTED                     _UxGT("Карта вставлена")
+#define MSG_MEDIA_INSERTED                  _UxGT("Карта вставлена")
-#define MSG_SD_REMOVED                      _UxGT("Карта извлечена")
+#define MSG_MEDIA_REMOVED                   _UxGT("Карта извлечена")
-#define MSG_SD_RELEASED                     _UxGT("SD карта не активна")
+#define MSG_MEDIA_RELEASED                  _UxGT("SD карта не активна")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Эндстопы") // Max length 8 characters
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Прогр. эндстопы")
 #define MSG_MAIN                            _UxGT("Меню")
@@ -255,7 +255,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Загрузить настройки")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Вернуть настройки")
 #define MSG_INIT_EEPROM                     _UxGT("Инициализация EEPROM")
-#define MSG_SD_UPDATE                       _UxGT("Обновление прошивки")
+#define MSG_MEDIA_UPDATE                    _UxGT("Обновление прошивки")
 #define MSG_RESET_PRINTER                   _UxGT("Сброс принтера")
 #define MSG_REFRESH                         _UxGT("Обновить")
 #define MSG_WATCH                           _UxGT("Информационный экран")
@@ -273,8 +273,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Продолжить печать")
 #define MSG_STOP_PRINT                      _UxGT("Остановить печать")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Восстановение сбоя")
-#define MSG_CARD_MENU                       _UxGT("Печать с SD карты")
+#define MSG_MEDIA_MENU                      _UxGT("Печать с SD карты")
-#define MSG_NO_CARD                         _UxGT("Нет SD карты")
+#define MSG_NO_MEDIA                        _UxGT("Нет SD карты")
 #define MSG_DWELL                           _UxGT("Сон...")
 #define MSG_USERWAIT                        _UxGT("Продолжить...")
 #define MSG_PRINT_PAUSED                    _UxGT("Печать на паузе")
@@ -303,9 +303,9 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Загрузка филамента")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Выгрузка филамента")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Выгрузить всё")
-#define MSG_INIT_SDCARD                     _UxGT("Активировать SD")
+#define MSG_INIT_MEDIA                      _UxGT("Активировать SD")
-#define MSG_CHANGE_SDCARD                   _UxGT("Сменить SD карту")
+#define MSG_CHANGE_MEDIA                    _UxGT("Сменить SD карту")
-#define MSG_RELEASE_SDCARD                  _UxGT("Деактивировать SD")
+#define MSG_RELEASE_MEDIA                   _UxGT("Деактивировать SD")
 #define MSG_ZPROBE_OUT                      _UxGT("Z датчик вне стола")
 #define MSG_SKEW_FACTOR                     _UxGT("Фактор наклона")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_sk.h

@@ -43,9 +43,9 @@
 #define MSG_YES                             _UxGT("ÁNO")
 #define MSG_NO                              _UxGT("NIE")
 #define MSG_BACK                            _UxGT("Naspäť")
-#define MSG_SD_INSERTED                     _UxGT("Karta vložená")
+#define MSG_MEDIA_INSERTED                  _UxGT("Karta vložená")
-#define MSG_SD_REMOVED                      _UxGT("Karta vybraná")
+#define MSG_MEDIA_REMOVED                   _UxGT("Karta vybraná")
-#define MSG_SD_RELEASED                     _UxGT("Karta odpojená")
+#define MSG_MEDIA_RELEASED                  _UxGT("Karta odpojená")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstopy") // max 8 znakov
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft. endstopy")
 #define MSG_MAIN                            _UxGT("Hlavná ponuka")
@@ -281,7 +281,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Načítať nastavenie")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Obnoviť nastavenie")
 #define MSG_INIT_EEPROM                     _UxGT("Inicializ. EEPROM")
-#define MSG_SD_UPDATE                       _UxGT("Aktualizovať z SD")
+#define MSG_MEDIA_UPDATE                    _UxGT("Aktualizovať z SD")
 #define MSG_RESET_PRINTER                   _UxGT("Reštart. tlačiar.")
 #define MSG_REFRESH                         _UxGT("Obnoviť")
 #define MSG_WATCH                           _UxGT("Info. obrazovka")
@@ -299,8 +299,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Obnoviť tlač")
 #define MSG_STOP_PRINT                      _UxGT("Zastaviť tlač")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Obnova po výp. nap.")
-#define MSG_CARD_MENU                       _UxGT("Tlačiť z SD")
+#define MSG_MEDIA_MENU                      _UxGT("Tlačiť z SD")
-#define MSG_NO_CARD                         _UxGT("Žiadna SD karta")
+#define MSG_NO_MEDIA                        _UxGT("Žiadna SD karta")
 #define MSG_DWELL                           _UxGT("Spím...")
 #define MSG_USERWAIT                        _UxGT("Pokrač. kliknutím...")
 #define MSG_PRINT_PAUSED                    _UxGT("Tlač pozastavená")
@@ -329,9 +329,9 @@
 #define MSG_FILAMENTUNLOAD                  _UxGT("Vysunúť filament")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Vysunúť všetko")
 
-#define MSG_INIT_SDCARD                     _UxGT("Načítať SD kartu")
+#define MSG_INIT_MEDIA                      _UxGT("Načítať SD kartu")
-#define MSG_CHANGE_SDCARD                   _UxGT("Vymeniť SD kartu")
+#define MSG_CHANGE_MEDIA                    _UxGT("Vymeniť SD kartu")
-#define MSG_RELEASE_SDCARD                  _UxGT("Odpojiť SD kartu")
+#define MSG_RELEASE_MEDIA                   _UxGT("Odpojiť SD kartu")
 #define MSG_ZPROBE_OUT                      _UxGT("Sonda Z mimo podl.")
 #define MSG_SKEW_FACTOR                     _UxGT("Faktor skosenia")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_tr.h

@@ -1,4 +1,4 @@
-/**
+ /**
  * Marlin 3D Printer Firmware
  * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -39,8 +39,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" hazır.")
 #define MSG_BACK                            _UxGT("Geri")
-#define MSG_SD_INSERTED                     _UxGT("SD K. Yerleştirildi.")
+#define MSG_MEDIA_INSERTED                  _UxGT("SD K. Yerleştirildi.")
-#define MSG_SD_REMOVED                      _UxGT("SD Kart Çıkarıldı.")
+#define MSG_MEDIA_REMOVED                   _UxGT("SD Kart Çıkarıldı.")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Enstops") // Max length 8 characters
 #define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Yazılımsal Endstops")
 #define MSG_MAIN                            _UxGT("Ana")
@@ -260,7 +260,7 @@
 #define MSG_LOAD_EEPROM                     _UxGT("Hafızadan Yükle")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Fabrika Ayarları")
 #define MSG_INIT_EEPROM                     _UxGT("EEPROM'u başlat")
-#define MSG_SD_UPDATE                       _UxGT("SD Güncellemesi")
+#define MSG_MEDIA_UPDATE                    _UxGT("SD Güncellemesi")
 #define MSG_RESET_PRINTER                   _UxGT("Yazıcıyı Resetle")
 #define MSG_REFRESH                         _UxGT("Yenile")
 #define MSG_WATCH                           _UxGT("Bilgi Ekranı")
@@ -270,8 +270,8 @@
 #define MSG_RESUME_PRINT                    _UxGT("Sürdür")
 #define MSG_STOP_PRINT                      _UxGT("Durdur")
 #define MSG_OUTAGE_RECOVERY                 _UxGT("Kesinti Kurtarma")
-#define MSG_CARD_MENU                       _UxGT("SD Karttan Yazdır")
+#define MSG_MEDIA_MENU                      _UxGT("SD Karttan Yazdır")
-#define MSG_NO_CARD                         _UxGT("SD Kart Yok!")
+#define MSG_NO_MEDIA                        _UxGT("SD Kart Yok!")
 #define MSG_DWELL                           _UxGT("Uyku...")
 #define MSG_USERWAIT                        _UxGT("Operatör bekleniyor.")
 #define MSG_PRINT_PAUSED                    _UxGT("Baskı Duraklatıldı")
@@ -298,8 +298,8 @@
 #define MSG_FILAMENTLOAD                    _UxGT("Filaman Yükle")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Filaman Çıkart")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Tümünü Çıkart")
-#define MSG_INIT_SDCARD                     _UxGT("SD Kart Başlatılıyor")
+#define MSG_INIT_MEDIA                      _UxGT("SD Kart Başlatılıyor")
-#define MSG_CHANGE_SDCARD                   _UxGT("SD Kart Değiştir")
+#define MSG_CHANGE_MEDIA                    _UxGT("SD Kart Değiştir")
 #define MSG_ZPROBE_OUT                      _UxGT("Z Prob Açık. Tabla")
 #define MSG_SKEW_FACTOR                     _UxGT("Çarpıklık Faktörü")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")

Marlin/src/lcd/language/language_uk.h

@@ -33,8 +33,8 @@
 #define CHARSIZE 2
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT(" готовий.")
-#define MSG_SD_INSERTED                     _UxGT("Картка вставлена")
+#define MSG_MEDIA_INSERTED                  _UxGT("Картка вставлена")
-#define MSG_SD_REMOVED                      _UxGT("Картка видалена")
+#define MSG_MEDIA_REMOVED                   _UxGT("Картка видалена")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Кінцевик") // Max length 8 characters
 #define MSG_MAIN                            _UxGT("Меню")
 #define MSG_AUTOSTART                       _UxGT("Автостарт")
@@ -145,8 +145,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Призупинити друк")
 #define MSG_RESUME_PRINT                    _UxGT("Відновити друк")
 #define MSG_STOP_PRINT                      _UxGT("Скасувати друк")
-#define MSG_CARD_MENU                       _UxGT("Друкувати з SD")
+#define MSG_MEDIA_MENU                      _UxGT("Друкувати з SD")
-#define MSG_NO_CARD                         _UxGT("Відсутня SD карт.")
+#define MSG_NO_MEDIA                        _UxGT("Відсутня SD карт.")
 #define MSG_DWELL                           _UxGT("Сплячка...")
 #define MSG_USERWAIT                        _UxGT("Очікування дій...")
 #define MSG_PRINT_ABORTED                   _UxGT("Друк скасовано")
@@ -154,8 +154,8 @@
 #define MSG_KILLED                          _UxGT("ПЕРЕРВАНО. ")
 #define MSG_STOPPED                         _UxGT("ЗУПИНЕНО. ")
 #define MSG_FILAMENTCHANGE                  _UxGT("Зміна волокна")
-#define MSG_INIT_SDCARD                     _UxGT("Старт SD картки")
+#define MSG_INIT_MEDIA                      _UxGT("Старт SD картки")
-#define MSG_CHANGE_SDCARD                   _UxGT("Заміна SD карти")
+#define MSG_CHANGE_MEDIA                    _UxGT("Заміна SD карти")
 #define MSG_ZPROBE_OUT                      _UxGT("Z дет. не в межах")
 #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Само-Тест")
 #define MSG_BLTOUCH_RESET                   _UxGT("Скинути BLTouch")

Marlin/src/lcd/language/language_zh_CN.h

@@ -33,8 +33,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT("已就绪.")  //" ready."
 #define MSG_BACK                            _UxGT("返回")         // ”Back“
-#define MSG_SD_INSERTED                     _UxGT("存储卡已插入")  //"Card inserted"
+#define MSG_MEDIA_INSERTED                  _UxGT("存储卡已插入")  //"Card inserted"
-#define MSG_SD_REMOVED                      _UxGT("存储卡被拔出")  //"Card removed"
+#define MSG_MEDIA_REMOVED                   _UxGT("存储卡被拔出")  //"Card removed"
 #define MSG_LCD_ENDSTOPS                    _UxGT("挡块")  //"Endstops" // Max length 8 characters
 #define MSG_MAIN                            _UxGT("主菜单")  //"Main"
 #define MSG_AUTOSTART                       _UxGT("自动开始")  //"Autostart"
@@ -243,8 +243,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("暂停打印")  //"Pause print"
 #define MSG_RESUME_PRINT                    _UxGT("恢复打印")  //"Resume print"
 #define MSG_STOP_PRINT                      _UxGT("停止打印")  //"Stop print"
-#define MSG_CARD_MENU                       _UxGT("从存储卡上打印")  //"Print from SD"
+#define MSG_MEDIA_MENU                      _UxGT("从存储卡上打印")  //"Print from SD"
-#define MSG_NO_CARD                         _UxGT("无存储卡")  //"No SD card"
+#define MSG_NO_MEDIA                        _UxGT("无存储卡")  //"No SD card"
 #define MSG_DWELL                           _UxGT("休眠中 ...")  //"Sleep..."
 #define MSG_USERWAIT                        _UxGT("点击继续 ...")  //"Click to resume..."
 #define MSG_PRINT_PAUSED                    _UxGT("暫停打印") // "Print paused"
@@ -265,8 +265,8 @@
 #define MSG_FILAMENTLOAD                    _UxGT("装载丝料") // "Load filament"
 #define MSG_FILAMENTUNLOAD                  _UxGT("卸载丝料") // "Unload filament"
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("卸载全部") // "Unload All"
-#define MSG_INIT_SDCARD                     _UxGT("初始化存储卡")  //"Init. SD card"
+#define MSG_INIT_MEDIA                      _UxGT("初始化存储卡")  //"Init. SD card"
-#define MSG_CHANGE_SDCARD                   _UxGT("更换存储卡")  //"Change SD card"
+#define MSG_CHANGE_MEDIA                    _UxGT("更换存储卡")  //"Change SD card"
 #define MSG_ZPROBE_OUT                      _UxGT("Z探针在热床之外")  //"Z probe out. bed" Z probe is not within the physical limits
 #define MSG_SKEW_FACTOR                     _UxGT("偏斜因数") // "Skew Factor"
 #define MSG_BLTOUCH                         _UxGT("BLTouch")     // "BLTouch"

Marlin/src/lcd/language/language_zh_TW.h

@@ -33,8 +33,8 @@
 
 #define WELCOME_MSG                         MACHINE_NAME _UxGT("已就緒.")  //" ready."
 #define MSG_BACK                            _UxGT("返回")         // ”Back“
-#define MSG_SD_INSERTED                     _UxGT("記憶卡已插入")  //"Card inserted"
+#define MSG_MEDIA_INSERTED                  _UxGT("記憶卡已插入")  //"Card inserted"
-#define MSG_SD_REMOVED                      _UxGT("記憶卡被拔出")  //"Card removed"
+#define MSG_MEDIA_REMOVED                   _UxGT("記憶卡被拔出")  //"Card removed"
 #define MSG_LCD_ENDSTOPS                    _UxGT("擋塊")  //"Endstops" // Max length 8 characters
 #define MSG_MAIN                            _UxGT("主選單")  //"Main"
 #define MSG_AUTOSTART                       _UxGT("自動開始")  //"Autostart"
@@ -243,8 +243,8 @@
 #define MSG_PAUSE_PRINT                     _UxGT("暫停列印")  //"Pause print"
 #define MSG_RESUME_PRINT                    _UxGT("恢復列印")  //"Resume print"
 #define MSG_STOP_PRINT                      _UxGT("停止列印")  //"Stop print"
-#define MSG_CARD_MENU                       _UxGT("從記憶卡上列印")  //"Print from SD"
+#define MSG_MEDIA_MENU                      _UxGT("從記憶卡上列印")  //"Print from SD"
-#define MSG_NO_CARD                         _UxGT("無記憶卡")  //"No SD card"
+#define MSG_NO_MEDIA                        _UxGT("無記憶卡")  //"No SD card"
 #define MSG_DWELL                           _UxGT("休眠 ...")  //"Sleep..."
 #define MSG_USERWAIT                        _UxGT("點擊繼續 ...")  //"Click to resume..."
 #define MSG_PRINT_PAUSED                    _UxGT("列印已暫停") // "Print paused"
@@ -265,8 +265,8 @@
 #define MSG_FILAMENTLOAD                    _UxGT("裝載絲料") // "Load filament"
 #define MSG_FILAMENTUNLOAD                  _UxGT("卸載絲料") // "Unload filament"
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("卸載全部") // "Unload All"
-#define MSG_INIT_SDCARD                     _UxGT("初始化記憶卡")  //"Init. SD card"
+#define MSG_INIT_MEDIA                      _UxGT("初始化記憶卡")  //"Init. SD card"
-#define MSG_CHANGE_SDCARD                   _UxGT("更換記憶卡")  //"Change SD card"
+#define MSG_CHANGE_MEDIA                    _UxGT("更換記憶卡")  //"Change SD card"
 #define MSG_ZPROBE_OUT                      _UxGT("Z探針在熱床之外")  //"Z probe out. bed" Z probe is not within the physical limits
 #define MSG_SKEW_FACTOR                     _UxGT("偏斜因數") // "Skew Factor"
 #define MSG_BLTOUCH                         _UxGT("BLTouch")     // "BLTouch"

Marlin/src/lcd/menu/menu.h

@@ -351,7 +351,7 @@ void menu_main();
 void menu_move();
 
 #if ENABLED(SDSUPPORT)
-  void menu_sdcard();
+  void menu_media();
 #endif
 
 // First Fan Speed title in "Tune" and "Control>Temperature" menus

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -699,7 +699,7 @@ void menu_advanced_settings() {
 
   #if ENABLED(SD_FIRMWARE_UPDATE)
     bool sd_update_state = settings.sd_update_status();
-    MENU_ITEM_EDIT_CALLBACK(bool, MSG_SD_UPDATE, &sd_update_state, []{
+    MENU_ITEM_EDIT_CALLBACK(bool, MSG_MEDIA_UPDATE, &sd_update_state, []{
       //
       // Toggle the SD Firmware Update state in EEPROM
       //

Marlin/src/lcd/menu/menu_main.cpp

@@ -126,22 +126,22 @@ void menu_main() {
 
       if (card_detected) {
         if (!card_open) {
-          MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
+          MENU_ITEM(submenu, MSG_MEDIA_MENU, menu_media);
           MENU_ITEM(gcode,
             #if PIN_EXISTS(SD_DETECT)
-              MSG_CHANGE_SDCARD, PSTR("M21")
+              MSG_CHANGE_MEDIA, PSTR("M21")
             #else
-              MSG_RELEASE_SDCARD, PSTR("M22")
+              MSG_RELEASE_MEDIA, PSTR("M22")
             #endif
           );
         }
       }
       else {
         #if PIN_EXISTS(SD_DETECT)
-          MENU_ITEM(function, MSG_NO_CARD, nullptr);
+          MENU_ITEM(function, MSG_NO_MEDIA, nullptr);
         #else
-          MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21"));
+          MENU_ITEM(gcode, MSG_INIT_MEDIA, PSTR("M21"));
-          MENU_ITEM(function, MSG_SD_RELEASED, nullptr);
+          MENU_ITEM(function, MSG_MEDIA_RELEASED, nullptr);
         #endif
       }
     #endif // !HAS_ENCODER_WHEEL && SDSUPPORT
@@ -219,20 +219,20 @@ void menu_main() {
       if (!card_open) {
         MENU_ITEM(gcode,
           #if PIN_EXISTS(SD_DETECT)
-            MSG_CHANGE_SDCARD, PSTR("M21")
+            MSG_CHANGE_MEDIA, PSTR("M21")
           #else
-            MSG_RELEASE_SDCARD, PSTR("M22")
+            MSG_RELEASE_MEDIA, PSTR("M22")
           #endif
         );
-        MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
+        MENU_ITEM(submenu, MSG_MEDIA_MENU, menu_media);
       }
     }
     else {
       #if PIN_EXISTS(SD_DETECT)
-        MENU_ITEM(function, MSG_NO_CARD, nullptr);
+        MENU_ITEM(function, MSG_NO_MEDIA, nullptr);
       #else
-        MENU_ITEM(gcode, MSG_INIT_SDCARD, PSTR("M21"));
+        MENU_ITEM(gcode, MSG_INIT_MEDIA, PSTR("M21"));
-        MENU_ITEM(function, MSG_SD_RELEASED, nullptr);
+        MENU_ITEM(function, MSG_MEDIA_RELEASED, nullptr);
       #endif
     }
   #endif // HAS_ENCODER_WHEEL && SDSUPPORT

Marlin/src/lcd/menu/menu_sdcard.cpp → Marlin/src/lcd/menu/menu_media.cpp

@@ -62,7 +62,7 @@ void lcd_sd_updir() {
     //  ui.drawing_screen = screen_changed = true;
     //#endif
 
-    goto_screen(menu_sdcard, sd_encoder_position, sd_top_line, sd_items);
+    goto_screen(menu_media, sd_encoder_position, sd_top_line, sd_items);
     sd_encoder_position = 0xFFFF;
 
     defer_status_screen();
@@ -122,7 +122,7 @@ class MenuItem_sdfolder {
     }
 };
 
-void menu_sdcard() {
+void menu_media() {
   ui.encoder_direction_menus();
 
   const uint16_t fileCnt = card.get_num_Files();
@@ -149,9 +149,9 @@ void menu_sdcard() {
       card.getfilename_sorted(nr);
 
       if (card.flag.filenameIsDir)
-        MENU_ITEM(sdfolder, MSG_CARD_MENU, card);
+        MENU_ITEM(sdfolder, MSG_MEDIA_MENU, card);
       else
-        MENU_ITEM(sdfile, MSG_CARD_MENU, card);
+        MENU_ITEM(sdfile, MSG_MEDIA_MENU, card);
     }
     else {
       MENU_ITEM_DUMMY();

Marlin/src/lcd/ultralcd.cpp

@@ -828,13 +828,13 @@ void MarlinUI::update() {
         if (old_sd_status == 2)
           card.beginautostart();  // Initial boot
         else
-          set_status_P(PSTR(MSG_SD_INSERTED));
+          set_status_P(PSTR(MSG_MEDIA_INSERTED));
       }
       #if PIN_EXISTS(SD_DETECT)
         else {
           card.release();
           if (old_sd_status != 2) {
-            set_status_P(PSTR(MSG_SD_REMOVED));
+            set_status_P(PSTR(MSG_MEDIA_REMOVED));
             #if HAS_LCD_MENU
               return_to_status();
             #endif
@@ -967,7 +967,7 @@ void MarlinUI::update() {
     #if HAS_LCD_MENU && ENABLED(SCROLL_LONG_FILENAMES)
       // If scrolling of long file names is enabled and we are in the sd card menu,
       // cause a refresh to occur until all the text has scrolled into view.
-      if (currentScreen == menu_sdcard && !lcd_status_update_delay--) {
+      if (currentScreen == menu_media && !lcd_status_update_delay--) {
         lcd_status_update_delay = 4;
         if (++filename_scroll_pos > filename_scroll_max) {
           filename_scroll_pos = 0;