STM32F1xx support for TFTGLCD (#20515)

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -972,6 +972,12 @@
 
       MeshFlags done_flags{0};
       const xy_int8_t &lpos = location.pos;
+
+      #if IS_TFTGLCD_PANEL
+        lcd_mesh_edit_setup(0);                             // Change current screen before calling ui.ubl_plot
+        safe_delay(50);
+      #endif
+
       do {
         location = find_closest_mesh_point_of_type(SET_IN_BITMAP, pos, false, &done_flags);
 

Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp

@@ -32,7 +32,7 @@
  * and supports color output.
  */
 
-#if NONE(__AVR__, TARGET_LPC1768, __STM32F1__, STM32F4xx)
+#if NONE(__AVR__, TARGET_LPC1768, STM32F1, STM32F4xx)
   #warning "Selected platform not yet tested. Please contribute your good pin mappings."
 #endif
 
@@ -129,7 +129,7 @@ static uint8_t PanelDetected = 0;
 #if ANY(__AVR__, TARGET_LPC1768, __STM32F1__, ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
   #define SPI_SEND_ONE(V) SPI.transfer(V);
   #define SPI_SEND_TWO(V) SPI.transfer16(V);
-#elif defined(STM32F4xx)
+#elif EITHER(STM32F4xx, STM32F1xx)
   #define SPI_SEND_ONE(V) SPI.transfer(V, SPI_CONTINUE);
   #define SPI_SEND_TWO(V) SPI.transfer16(V, SPI_CONTINUE);
 #elif defined(ARDUINO_ARCH_ESP32)
@@ -139,7 +139,7 @@ static uint8_t PanelDetected = 0;
 
 #if ANY(__AVR__, ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__)
   #define SPI_SEND_SOME(V,L,Z)  SPI.transfer(&V[Z], L);
-#elif defined(STM32F4xx)
+#elif EITHER(STM32F4xx, STM32F1xx)
   #define SPI_SEND_SOME(V,L,Z)  SPI.transfer(&V[Z], L, SPI_CONTINUE);
 #elif ANY(TARGET_LPC1768, __STM32F1__, ARDUINO_ARCH_ESP32)
   #define SPI_SEND_SOME(V,L,Z)  do{ for (uint16_t i = 0; i < L; i++) SPI_SEND_ONE(V[(Z)+i]); }while(0)
@@ -276,7 +276,7 @@ uint8_t MarlinUI::read_slow_buttons(void) {
     Wire.endTransmission();
     #ifdef __AVR__
       Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 2, 0, 0, 1);
-    #elif defined(__STM32F1__)
+    #elif defined(STM32F1)
       Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, (uint8_t)2);
     #elif EITHER(STM32F4xx, TARGET_LPC1768)
       Wire.requestFrom(LCD_I2C_ADDRESS, 2);
@@ -330,7 +330,7 @@ void MarlinUI::init_lcd() {
     Wire.endTransmission(); // send buffer
     #ifdef __AVR__
       Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 1, 0, 0, 1);
-    #elif ANY(__STM32F1__, STM32F4xx, TARGET_LPC1768)
+    #elif ANY(STM32F1, STM32F4xx, TARGET_LPC1768)
       Wire.requestFrom(LCD_I2C_ADDRESS, 1);
     #endif
     t = (uint8_t)Wire.read();
@@ -626,7 +626,7 @@ Equal to 20x10 text LCD
 | ttc  ttc   %       | ttc - current temperature
 | tts  tts  %%%      | tts - setted temperature, %%% - percent for FAN
 | ICO  ICO  ICO  ICO | ICO - icon 48x48, placed in 2 text lines
-| ICO  ICO  ICO  ICO | ICO /
+| ICO  ICO  ICO  ICO | ICO
 
 or
 

Marlin/src/pins/stm32f1/pins_MORPHEUS.h

@@ -30,7 +30,7 @@
  * MORPHEUS Board pin assignments
  */
 
-#if NOT_TARGET(__STM32F1__)
+#if NOT_TARGET(__STM32F1__, STM32F1xx)
   #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
 #endif
 
@@ -90,3 +90,4 @@
 #define LED_PIN                             PC13
 #define SDSS                                PA3
 #define TFTGLCD_CS                          PA4
+#define SD_DETECT_PIN                       PC14