Browse Source

FYSETC S6 2.0 (#19140)

vanilla_fb_2.0.x
George Fu 4 years ago
committed by GitHub
parent
commit
1e124e6713
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 5
      Marlin/src/core/boards.h
  2. 2
      Marlin/src/pins/pins.h
  3. 35
      Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
  4. 67
      Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h

5
Marlin/src/core/boards.h

@ -345,8 +345,9 @@
#define BOARD_LERDGE_X 4215 // Lerdge X (STM32F407VE) #define BOARD_LERDGE_X 4215 // Lerdge X (STM32F407VE)
#define BOARD_VAKE403D 4216 // VAkE 403D (STM32F446VET6) #define BOARD_VAKE403D 4216 // VAkE 403D (STM32F446VET6)
#define BOARD_FYSETC_S6 4217 // FYSETC S6 board #define BOARD_FYSETC_S6 4217 // FYSETC S6 board
#define BOARD_FLYF407ZG 4218 // FLYF407ZG board (STM32F407ZG) #define BOARD_FYSETC_S6_V2_0 4218 // FYSETC S6 v2.0 board
#define BOARD_MKS_ROBIN2 4219 // MKS_ROBIN2 (STM32F407ZE) #define BOARD_FLYF407ZG 4219 // FLYF407ZG board (STM32F407ZG)
#define BOARD_MKS_ROBIN2 4220 // MKS_ROBIN2 (STM32F407ZE)
// //
// ARM Cortex M7 // ARM Cortex M7

2
Marlin/src/pins/pins.h

@ -606,6 +606,8 @@
#include "stm32f4/pins_FLYF407ZG.h" // STM32F4 env:FLYF407ZG #include "stm32f4/pins_FLYF407ZG.h" // STM32F4 env:FLYF407ZG
#elif MB(MKS_ROBIN2) #elif MB(MKS_ROBIN2)
#include "stm32f4/pins_MKS_ROBIN2.h" // STM32F4 env:MKS_ROBIN2 #include "stm32f4/pins_MKS_ROBIN2.h" // STM32F4 env:MKS_ROBIN2
#elif MB(FYSETC_S6_V2_0)
#include "stm32f4/pins_FYSETC_S6_V2_0.h" // STM32F4 env:FYSETC_S6
// //
// ARM Cortex M7 // ARM Cortex M7

35
Marlin/src/pins/stm32f4/pins_FYSETC_S6.h

@ -28,7 +28,7 @@
#endif #endif
#ifndef BOARD_INFO_NAME #ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "FYSETC_S6" #define BOARD_INFO_NAME "FYSETC S6"
#endif #endif
#ifndef DEFAULT_MACHINE_NAME #ifndef DEFAULT_MACHINE_NAME
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
@ -82,7 +82,9 @@
// //
#define X_STEP_PIN PE11 #define X_STEP_PIN PE11
#define X_DIR_PIN PE10 #define X_DIR_PIN PE10
#define X_ENABLE_PIN PE12 #ifndef X_ENABLE_PIN
#define X_ENABLE_PIN PE12
#endif
#define X_CS_PIN PE7 #define X_CS_PIN PE7
#define Y_STEP_PIN PD8 #define Y_STEP_PIN PD8
@ -118,23 +120,42 @@
// //
// Software serial // Software serial
// //
#ifndef X_SERIAL_TX_PIN
#define X_SERIAL_TX_PIN PE9 #define X_SERIAL_TX_PIN PE9
#endif
#ifndef X_SERIAL_RX_PIN
#define X_SERIAL_RX_PIN PE8 #define X_SERIAL_RX_PIN PE8
#endif
#ifndef Y_SERIAL_TX_PIN
#define Y_SERIAL_TX_PIN PE14 #define Y_SERIAL_TX_PIN PE14
#endif
#ifndef Y_SERIAL_RX_PIN
#define Y_SERIAL_RX_PIN PE13 #define Y_SERIAL_RX_PIN PE13
#endif
#ifndef Z_SERIAL_TX_PIN
#define Z_SERIAL_TX_PIN PD11 #define Z_SERIAL_TX_PIN PD11
#endif
#ifndef Z_SERIAL_RX_PIN
#define Z_SERIAL_RX_PIN PD12 #define Z_SERIAL_RX_PIN PD12
#endif
#ifndef E0_SERIAL_TX_PIN
#define E0_SERIAL_TX_PIN PD3 #define E0_SERIAL_TX_PIN PD3
#endif
#ifndef E0_SERIAL_RX_PIN
#define E0_SERIAL_RX_PIN PA15 #define E0_SERIAL_RX_PIN PA15
#endif
#ifndef E1_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN PC4 #define E1_SERIAL_TX_PIN PC4
#endif
#ifndef E1_SERIAL_RX_PIN
#define E1_SERIAL_RX_PIN PC5 #define E1_SERIAL_RX_PIN PC5
#endif
#ifndef E2_SERIAL_TX_PIN
#define E2_SERIAL_TX_PIN PE1 #define E2_SERIAL_TX_PIN PE1
#endif
#ifndef E2_SERIAL_RX_PIN
#define E2_SERIAL_RX_PIN PE0 #define E2_SERIAL_RX_PIN PE0
#endif
#endif #endif
// //

67
Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h

@ -0,0 +1,67 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define BOARD_INFO_NAME "FYSETC S6 2.0"
//
// EEPROM Emulation
//
#if NO_EEPROM_SELECTED
#undef NO_EEPROM_SELECTED
//#define FLASH_EEPROM_EMULATION
//#define SRAM_EEPROM_EMULATION
#define I2C_EEPROM
#endif
//
// Steppers
//
#define X_ENABLE_PIN PE9
#if HAS_TMC_UART
#define X_SERIAL_TX_PIN PE8
#define Y_SERIAL_TX_PIN PC4
#define Y_SERIAL_RX_PIN PC4
#define Z_SERIAL_TX_PIN PD12
#define E0_SERIAL_TX_PIN PA15
#define E1_SERIAL_TX_PIN PC5
#define E2_SERIAL_TX_PIN PE0
#endif
//
// Software SPI pins for TMC2130 stepper drivers
//
#define TMC_USE_SW_SPI
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI PE14
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO PE13
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK PE12
#endif
#endif
#include "pins_FYSETC_S6.h"
Loading…
Cancel
Save