Browse Source

Tweaks to CR-10S configuration

pull/1/head
Scott Lahteine 6 years ago
parent
commit
1d366db764
  1. 28
      Marlin/src/config/examples/Creality/CR-10S/Configuration.h

28
Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@ -90,7 +90,7 @@
*/
// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
//#define SHOW_CUSTOM_BOOTSCREEN
#define SHOW_CUSTOM_BOOTSCREEN
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
#define CUSTOM_STATUS_SCREEN_IMAGE
@ -675,9 +675,9 @@
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
#define DEFAULT_ACCELERATION 575 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves
/**
* Default Jerk (mm/s)
@ -687,8 +687,8 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
#define DEFAULT_XJERK 20.0
#define DEFAULT_YJERK 20.0
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.4
#define DEFAULT_EJERK 5.0
@ -934,15 +934,15 @@
// @section machine
// The size of the print bed
#define X_BED_SIZE 300
#define Y_BED_SIZE 300
#define X_BED_SIZE 296 // Nozzle is at X4 when homed
#define Y_BED_SIZE 298 // Nozzle is at Y2 when homed
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
#define Y_MIN_POS 0
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#define X_MAX_POS 319 // 15mm Extra space on the right end
#define Y_MAX_POS 306 // 4mm Extra space behind the bed
#define Z_MAX_POS 400
// Z raise distance for tool-change, as needed for some extruders
@ -1200,8 +1200,8 @@
// Manually set the home position. Leave these undefined for automatic settings.
// For DELTA this is the top-center of the Cartesian print volume.
//#define MANUAL_X_HOME_POS 0
//#define MANUAL_Y_HOME_POS 0
#define MANUAL_X_HOME_POS 4
#define MANUAL_Y_HOME_POS 2
//#define MANUAL_Z_HOME_POS 0
// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
@ -1216,13 +1216,13 @@
//#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_X_POINT 150 // X point for Z homing when homing all axes (G28).
#define Z_SAFE_HOMING_Y_POINT 150 // Y point for Z homing when homing all axes (G28).
#endif
// Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60)
#define HOMING_FEEDRATE_Z (4*60)
#define HOMING_FEEDRATE_Z (8*60)
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS

Loading…
Cancel
Save