Browse Source

[2.0.x] Automatically reset stepper timeout (#10179)

* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
pull/1/head
Scott Lahteine 7 years ago
committed by GitHub
parent
commit
1cb810ff1c
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 49
      Marlin/src/Marlin.cpp
  2. 2
      Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
  3. 5
      Marlin/src/gcode/config/M43.cpp
  4. 7
      Marlin/src/gcode/gcode.cpp
  5. 4
      Marlin/src/gcode/gcode.h
  6. 3
      Marlin/src/gcode/lcd/M0_M1.cpp
  7. 2
      Marlin/src/gcode/motion/G2_G3.cpp
  8. 1
      Marlin/src/gcode/queue.cpp
  9. 2
      Marlin/src/gcode/temperature/M104_M109.cpp
  10. 2
      Marlin/src/gcode/temperature/M140_M190.cpp
  11. 8
      Marlin/src/lcd/ultralcd.cpp
  12. 5
      Marlin/src/module/motion.cpp
  13. 4
      Marlin/src/module/planner.cpp
  14. 8
      Marlin/src/module/planner.h
  15. 3
      Marlin/src/module/probe.cpp
  16. 4
      Marlin/src/module/stepper.cpp

49
Marlin/src/Marlin.cpp

@ -336,7 +336,7 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
const millis_t ms = millis();
if (max_inactive_time && ELAPSED(ms, gcode.previous_cmd_ms + max_inactive_time)) {
if (max_inactive_time && ELAPSED(ms, gcode.previous_move_ms + max_inactive_time)) {
SERIAL_ERROR_START();
SERIAL_ECHOLNPAIR(MSG_KILL_INACTIVE_TIME, parser.command_ptr);
kill(PSTR(MSG_KILLED));
@ -349,23 +349,26 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#define MOVE_AWAY_TEST true
#endif
if (MOVE_AWAY_TEST && stepper_inactive_time && ELAPSED(ms, gcode.previous_cmd_ms + stepper_inactive_time)
&& !ignore_stepper_queue && !planner.blocks_queued()) {
#if ENABLED(DISABLE_INACTIVE_X)
disable_X();
#endif
#if ENABLED(DISABLE_INACTIVE_Y)
disable_Y();
#endif
#if ENABLED(DISABLE_INACTIVE_Z)
disable_Z();
#endif
#if ENABLED(DISABLE_INACTIVE_E)
disable_e_steppers();
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTIPANEL) // Only needed with an LCD
if (ubl.lcd_map_control) ubl.lcd_map_control = defer_return_to_status = false;
#endif
if (stepper_inactive_time) {
if (planner.has_blocks_queued())
gcode.previous_move_ms = ms; // reset_stepper_timeout to keep steppers powered
else if (MOVE_AWAY_TEST && !ignore_stepper_queue && ELAPSED(ms, gcode.previous_move_ms + stepper_inactive_time)) {
#if ENABLED(DISABLE_INACTIVE_X)
disable_X();
#endif
#if ENABLED(DISABLE_INACTIVE_Y)
disable_Y();
#endif
#if ENABLED(DISABLE_INACTIVE_Z)
disable_Z();
#endif
#if ENABLED(DISABLE_INACTIVE_E)
disable_e_steppers();
#endif
#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(ULTIPANEL) // Only needed with an LCD
if (ubl.lcd_map_control) ubl.lcd_map_control = defer_return_to_status = false;
#endif
}
}
#ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH
@ -424,8 +427,8 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#if ENABLED(EXTRUDER_RUNOUT_PREVENT)
if (thermalManager.degHotend(active_extruder) > EXTRUDER_RUNOUT_MINTEMP
&& ELAPSED(ms, gcode.previous_cmd_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL)
&& !planner.blocks_queued()
&& ELAPSED(ms, gcode.previous_move_ms + (EXTRUDER_RUNOUT_SECONDS) * 1000UL)
&& !planner.has_blocks_queued()
) {
#if ENABLED(SWITCHING_EXTRUDER)
const bool oldstatus = E0_ENABLE_READ;
@ -449,8 +452,6 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
}
#endif // !SWITCHING_EXTRUDER
gcode.refresh_cmd_timeout();
const float olde = current_position[E_AXIS];
current_position[E_AXIS] += EXTRUDER_RUNOUT_EXTRUDE;
planner.buffer_line_kinematic(current_position, MMM_TO_MMS(EXTRUDER_RUNOUT_SPEED), active_extruder);
@ -476,6 +477,8 @@ void manage_inactivity(bool ignore_stepper_queue/*=false*/) {
#endif // E_STEPPERS > 1
}
#endif // !SWITCHING_EXTRUDER
gcode.previous_move_ms = ms; // reset_stepper_timeout to keep steppers powered
}
#endif // EXTRUDER_RUNOUT_PREVENT
@ -541,7 +544,7 @@ void idle(
#if ENABLED(I2C_POSITION_ENCODERS)
static millis_t i2cpem_next_update_ms;
if (planner.blocks_queued() && ELAPSED(millis(), i2cpem_next_update_ms)) {
if (planner.has_blocks_queued() && ELAPSED(millis(), i2cpem_next_update_ms)) {
I2CPEM.update();
i2cpem_next_update_ms = millis() + I2CPE_MIN_UPD_TIME_MS;
}

2
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@ -779,7 +779,7 @@
wait_for_release();
while (!is_lcd_clicked()) {
idle();
gcode.refresh_cmd_timeout();
gcode.reset_stepper_timeout(); // Keep steppers powered
if (encoder_diff) {
do_blocking_move_to_z(current_position[Z_AXIS] + float(encoder_diff) * multiplier);
encoder_diff = 0;

5
Marlin/src/gcode/config/M43.cpp

@ -155,8 +155,6 @@ inline void servo_probe_test() {
} while (++i < 4);
if (probe_inverting != deploy_state) SERIAL_PROTOCOLLNPGM("WARNING - INVERTING setting probably backwards");
gcode.refresh_cmd_timeout();
if (deploy_state != stow_state) {
SERIAL_PROTOCOLLNPGM("BLTouch clone detected");
if (deploy_state) {
@ -182,8 +180,7 @@ inline void servo_probe_test() {
safe_delay(2);
if (0 == j % (500 * 1)) // keep cmd_timeout happy
gcode.refresh_cmd_timeout();
if (0 == j % (500 * 1)) gcode.reset_stepper_timeout(); // Keep steppers powered
if (deploy_state != READ(PROBE_TEST_PIN)) { // probe triggered

7
Marlin/src/gcode/gcode.cpp

@ -43,7 +43,7 @@ GcodeSuite gcode;
#include "../Marlin.h" // for idle() and suspend_auto_report
uint8_t GcodeSuite::target_extruder;
millis_t GcodeSuite::previous_cmd_ms;
millis_t GcodeSuite::previous_move_ms;
bool GcodeSuite::axis_relative_modes[] = AXIS_RELATIVE_MODES;
@ -121,8 +121,7 @@ void GcodeSuite::get_destination_from_command() {
* Dwell waits immediately. It does not synchronize. Use M400 instead of G4
*/
void GcodeSuite::dwell(millis_t time) {
refresh_cmd_timeout();
time += previous_cmd_ms;
time += millis();
while (PENDING(millis(), time)) idle();
}
@ -735,6 +734,8 @@ void GcodeSuite::process_next_command() {
#endif
}
reset_stepper_timeout(); // Keep steppers powered
// Parse the next command in the queue
parser.parse(current_command);
process_parsed_command();

4
Marlin/src/gcode/gcode.h

@ -280,8 +280,8 @@ public:
static bool select_coordinate_system(const int8_t _new);
#endif
static millis_t previous_cmd_ms;
FORCE_INLINE static void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
static millis_t previous_move_ms;
FORCE_INLINE static void reset_stepper_timeout() { previous_move_ms = millis(); }
static bool get_target_extruder_from_command();
static void get_destination_from_command();

3
Marlin/src/gcode/lcd/M0_M1.cpp

@ -75,10 +75,9 @@ void GcodeSuite::M0_M1() {
wait_for_user = true;
stepper.synchronize();
refresh_cmd_timeout();
if (ms > 0) {
ms += previous_cmd_ms; // wait until this time for a click
ms += previous_move_ms; // wait until this time for a click
while (PENDING(millis(), ms) && wait_for_user) idle();
}
else {

2
Marlin/src/gcode/motion/G2_G3.cpp

@ -269,7 +269,7 @@ void GcodeSuite::G2_G3(const bool clockwise) {
// Send the arc to the planner
plan_arc(destination, arc_offset, clockwise);
refresh_cmd_timeout();
reset_stepper_timeout();
}
else {
// Bad arguments

1
Marlin/src/gcode/queue.cpp

@ -204,7 +204,6 @@ void ok_to_send() {
const int16_t port = command_queue_port[cmd_queue_index_r];
if (port < 0) return;
#endif
gcode.refresh_cmd_timeout();
if (!send_ok[cmd_queue_index_r]) return;
SERIAL_PROTOCOLPGM_P(port, MSG_OK);
#if ENABLED(ADVANCED_OK)

2
Marlin/src/gcode/temperature/M104_M109.cpp

@ -185,7 +185,7 @@ void GcodeSuite::M109() {
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
reset_stepper_timeout(); // Keep steppers powered
const float temp = thermalManager.degHotend(target_extruder);

2
Marlin/src/gcode/temperature/M140_M190.cpp

@ -122,7 +122,7 @@ void GcodeSuite::M190() {
}
idle();
refresh_cmd_timeout(); // to prevent stepper_inactive_time from running out
reset_stepper_timeout(); // Keep steppers powered
const float temp = thermalManager.degBed();

8
Marlin/src/lcd/ultralcd.cpp

@ -1885,7 +1885,6 @@ void kill_screen(const char* lcd_msg) {
// Encoder knob or keypad buttons adjust the Z position
//
if (encoderPosition) {
gcode.refresh_cmd_timeout();
const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP);
line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5));
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
@ -2409,7 +2408,6 @@ void kill_screen(const char* lcd_msg) {
stepper.cleaning_buffer_counter = 0;
set_current_from_steppers_for_axis(ALL_AXES);
sync_plan_position();
gcode.refresh_cmd_timeout();
}
void _lcd_ubl_output_map_lcd() {
@ -2424,10 +2422,7 @@ void kill_screen(const char* lcd_msg) {
if (encoderPosition) {
step_scaler += (int32_t)encoderPosition;
x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM);
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM)
step_scaler = 0;
gcode.refresh_cmd_timeout();
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
encoderPosition = 0;
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
}
@ -2909,7 +2904,6 @@ void kill_screen(const char* lcd_msg) {
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
ENCODER_DIRECTION_NORMAL();
if (encoderPosition && !processing_manual_move) {
gcode.refresh_cmd_timeout();
// Start with no limits to movement
float min = current_position[axis] - 1000,

5
Marlin/src/module/motion.cpp

@ -266,8 +266,6 @@ void buffer_line_to_destination(const float fr_mm_s) {
if (DEBUGGING(LEVELING)) DEBUG_POS("prepare_uninterpolated_move_to_destination", destination);
#endif
gcode.refresh_cmd_timeout();
#if UBL_SEGMENTED
// ubl segmented line will do z-only moves in single segment
ubl.prepare_segmented_line_to(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s));
@ -435,12 +433,10 @@ void bracket_probe_move(const bool before) {
saved_feedrate_mm_s = feedrate_mm_s;
saved_feedrate_percentage = feedrate_percentage;
feedrate_percentage = 100;
gcode.refresh_cmd_timeout();
}
else {
feedrate_mm_s = saved_feedrate_mm_s;
feedrate_percentage = saved_feedrate_percentage;
gcode.refresh_cmd_timeout();
}
}
@ -859,7 +855,6 @@ float soft_endstop_min[XYZ] = { X_MIN_BED, Y_MIN_BED, Z_MIN_POS },
*/
void prepare_move_to_destination() {
clamp_to_software_endstops(destination);
gcode.refresh_cmd_timeout();
#if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE)

4
Marlin/src/module/planner.cpp

@ -468,7 +468,7 @@ void Planner::check_axes_activity() {
#endif
#endif
if (blocks_queued()) {
if (has_blocks_queued()) {
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++)
@ -1547,7 +1547,7 @@ void Planner::buffer_segment(const float &a, const float &b, const float &c, con
//*/
// Always split the first move into two (if not homing or probing)
if (!blocks_queued()) {
if (!has_blocks_queued()) {
#define _BETWEEN(A) (position[A##_AXIS] + target[A##_AXIS]) >> 1
const int32_t between[ABCE] = { _BETWEEN(A), _BETWEEN(B), _BETWEEN(C), _BETWEEN(E) };

8
Marlin/src/module/planner.h

@ -512,14 +512,14 @@ class Planner {
/**
* Does the buffer have any blocks queued?
*/
static bool blocks_queued() { return (block_buffer_head != block_buffer_tail); }
static bool has_blocks_queued() { return (block_buffer_head != block_buffer_tail); }
/**
* "Discard" the block and "release" the memory.
* Called when the current block is no longer needed.
*/
FORCE_INLINE static void discard_current_block() {
if (blocks_queued())
if (has_blocks_queued())
block_buffer_tail = BLOCK_MOD(block_buffer_tail + 1);
}
@ -528,7 +528,7 @@ class Planner {
* Called after an interrupted move to throw away the rest of the move.
*/
FORCE_INLINE static bool discard_continued_block() {
const bool discard = blocks_queued() && TEST(block_buffer[block_buffer_tail].flag, BLOCK_BIT_CONTINUED);
const bool discard = has_blocks_queued() && TEST(block_buffer[block_buffer_tail].flag, BLOCK_BIT_CONTINUED);
if (discard) discard_current_block();
return discard;
}
@ -539,7 +539,7 @@ class Planner {
* WARNING: Called from Stepper ISR context!
*/
static block_t* get_current_block() {
if (blocks_queued()) {
if (has_blocks_queued()) {
block_t * const block = &block_buffer[block_buffer_tail];
// If the block has no trapezoid calculated, it's unsafe to execute.

3
Marlin/src/module/probe.cpp

@ -545,9 +545,6 @@ static float run_z_probe() {
if (DEBUGGING(LEVELING)) DEBUG_POS(">>> run_z_probe", current_position);
#endif
// Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
gcode.refresh_cmd_timeout();
// Double-probing does a fast probe followed by a slow probe
#if MULTIPLE_PROBING == 2

4
Marlin/src/module/stepper.cpp

@ -1091,7 +1091,7 @@ void Stepper::init() {
/**
* Block until all buffered steps are executed / cleaned
*/
void Stepper::synchronize() { while (planner.blocks_queued() || cleaning_buffer_counter) idle(); }
void Stepper::synchronize() { while (planner.has_blocks_queued() || cleaning_buffer_counter) idle(); }
/**
* Set the stepper positions directly in steps
@ -1191,7 +1191,7 @@ void Stepper::finish_and_disable() {
void Stepper::quick_stop() {
cleaning_buffer_counter = 5000;
DISABLE_STEPPER_DRIVER_INTERRUPT();
while (planner.blocks_queued()) planner.discard_current_block();
while (planner.has_blocks_queued()) planner.discard_current_block();
current_block = NULL;
ENABLE_STEPPER_DRIVER_INTERRUPT();
#if ENABLED(ULTRA_LCD)

Loading…
Cancel
Save