Browse Source

🐛 Fix G38 with probe on Z_MIN (#22452)

vanilla_fb_2.0.x
Grayson 3 years ago
committed by Scott Lahteine
parent
commit
1866f51d08
  1. 4
      Marlin/src/inc/Conditionals_LCD.h
  2. 2
      Marlin/src/inc/Conditionals_post.h
  3. 32
      Marlin/src/module/endstops.cpp

4
Marlin/src/inc/Conditionals_LCD.h

@ -771,7 +771,7 @@
#endif
/**
* Set flags for enabled probes
* Set a flag for any type of bed probe, including the paper-test
*/
#if ANY(HAS_Z_SERVO_PROBE, FIX_MOUNTED_PROBE, NOZZLE_AS_PROBE, TOUCH_MI_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, SOLENOID_PROBE, SENSORLESS_PROBING, RACK_AND_PINION_PROBE)
#define HAS_BED_PROBE 1
@ -913,7 +913,7 @@
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && !BOTH(DELTA, SENSORLESS_PROBING)
#define USES_Z_MIN_PROBE_PIN 1
#endif
#if Z_HOME_TO_MIN && (!USES_Z_MIN_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING))
#if Z_HOME_TO_MIN && TERN1(USES_Z_MIN_PROBE_PIN, ENABLED(USE_PROBE_FOR_Z_HOMING))
#define HOMING_Z_WITH_PROBE 1
#endif
#ifndef Z_PROBE_LOW_POINT

2
Marlin/src/inc/Conditionals_post.h

@ -2533,7 +2533,7 @@
#if PIN_EXISTS(Z4_MAX)
#define HAS_Z4_MAX 1
#endif
#if BOTH(HAS_BED_PROBE, USES_Z_MIN_PROBE_PIN) && PIN_EXISTS(Z_MIN_PROBE)
#if HAS_BED_PROBE && PIN_EXISTS(Z_MIN_PROBE)
#define HAS_Z_MIN_PROBE_PIN 1
#endif

32
Marlin/src/module/endstops.cpp

@ -596,14 +596,15 @@ void _O2 Endstops::report_states() {
// endstop ISR or the Stepper ISR.
#if BOTH(DELTA, SENSORLESS_PROBING)
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_MAX
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_MAX_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_MAX_ENDSTOP_INVERTING
#define __ENDSTOP(AXIS, ...) AXIS ##_MAX
#define _ENDSTOP_PIN(AXIS, ...) AXIS ##_MAX_PIN
#define _ENDSTOP_INVERTING(AXIS, ...) AXIS ##_MAX_ENDSTOP_INVERTING
#else
#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
#define __ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
#endif
#define _ENDSTOP(AXIS, MINMAX) __ENDSTOP(AXIS, MINMAX)
// Check endstops - Could be called from Temperature ISR!
void Endstops::update() {
@ -615,9 +616,10 @@ void Endstops::update() {
#define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
#define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT))
#if BOTH(G38_PROBE_TARGET, HAS_Z_MIN_PROBE_PIN) && NONE(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY)
// If G38 command is active check Z_MIN_PROBE for ALL movement
if (G38_move) UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
#if ENABLED(G38_PROBE_TARGET) && NONE(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY)
#define HAS_G38_PROBE 1
// For G38 moves check the probe's pin for ALL movement
if (G38_move) UPDATE_ENDSTOP_BIT(Z, TERN(USES_Z_MIN_PROBE_PIN, MIN_PROBE, MIN));
#endif
// With Dual X, endstops are only checked in the homing direction for the active extruder
@ -746,7 +748,7 @@ void Endstops::update() {
COPY_LIVE_STATE(Z_MAX, Z4_MAX);
#endif
#endif
#elif !USES_Z_MIN_PROBE_PIN || Z_MAX_PIN != Z_MIN_PROBE_PIN
#elif TERN1(USES_Z_MIN_PROBE_PIN, Z_MAX_PIN != Z_MIN_PROBE_PIN)
// If this pin isn't the bed probe it's the Z endstop
UPDATE_ENDSTOP_BIT(Z, MAX);
#endif
@ -930,14 +932,10 @@ void Endstops::update() {
#define PROCESS_ENDSTOP_Z(MINMAX) PROCESS_DUAL_ENDSTOP(Z, MINMAX)
#endif
#if BOTH(G38_PROBE_TARGET, HAS_Z_MIN_PROBE_PIN) && NONE(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY)
#if ENABLED(G38_PROBE_AWAY)
#define _G38_OPEN_STATE (G38_move >= 4)
#else
#define _G38_OPEN_STATE LOW
#endif
// If G38 command is active check Z_MIN_PROBE for ALL movement
if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE)) != _G38_OPEN_STATE) {
#if HAS_G38_PROBE
#define _G38_OPEN_STATE TERN(G38_PROBE_AWAY, (G38_move >= 4), LOW)
// For G38 moves check the probe's pin for ALL movement
if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, TERN(USES_Z_MIN_PROBE_PIN, MIN_PROBE, MIN))) != _G38_OPEN_STATE) {
if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, TERN(X_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(X_AXIS); }
#if HAS_Y_AXIS
else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, TERN(Y_HOME_TO_MIN, MIN, MAX)); planner.endstop_triggered(Y_AXIS); }
@ -1043,7 +1041,7 @@ void Endstops::update() {
#if HAS_Z_MAX || (Z_SPI_SENSORLESS && Z_HOME_TO_MAX)
#if ENABLED(Z_MULTI_ENDSTOPS)
PROCESS_ENDSTOP_Z(MAX);
#elif !USES_Z_MIN_PROBE_PIN || Z_MAX_PIN != Z_MIN_PROBE_PIN // No probe or probe is Z_MIN || Probe is not Z_MAX
#elif TERN1(USES_Z_MIN_PROBE_PIN, Z_MAX_PIN != Z_MIN_PROBE_PIN) // No probe or probe is Z_MIN || Probe is not Z_MAX
PROCESS_ENDSTOP(Z, MAX);
#endif
#if CORE_DIAG(XZ, X, MIN)

Loading…
Cancel
Save