Add RESTORE_LEVELING_AFTER_G28 to example configs

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -932,6 +932,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -1022,6 +1022,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -919,6 +919,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

@@ -912,6 +912,12 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -900,6 +900,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -898,6 +898,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -900,6 +900,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -911,6 +911,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -922,6 +922,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -904,6 +904,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

@@ -931,6 +931,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Creality/Ender/Configuration.h

@@ -907,6 +907,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Felix/Configuration.h

@@ -894,6 +894,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -894,6 +894,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -918,6 +918,12 @@
 #define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -927,6 +927,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -919,6 +919,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -918,6 +918,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -916,6 +916,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/JGAurora/A5/Configuration.h

@@ -924,6 +924,12 @@
 //#define AUTO_BED_LEVELING_UBL
 #define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -932,6 +932,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -940,6 +940,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -911,6 +911,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -916,6 +916,12 @@
 //#define AUTO_BED_LEVELING_UBL
 #define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -916,6 +916,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -910,6 +910,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/SCARA/Configuration.h

@@ -924,6 +924,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -915,6 +915,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -943,6 +943,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/TheBorg/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -968,6 +968,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -903,6 +903,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

@@ -923,6 +923,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -903,6 +903,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -942,6 +942,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -913,6 +913,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -912,6 +912,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1042,6 +1042,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

@@ -1033,6 +1033,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -1042,6 +1042,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -1045,6 +1045,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -1029,6 +1029,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -1032,6 +1032,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -1032,6 +1032,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -1041,6 +1041,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -926,6 +926,12 @@
 #define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/makibox/Configuration.h

@@ -915,6 +915,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -913,6 +913,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -907,6 +907,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.

Marlin/src/config/examples/wt150/Configuration.h

@@ -917,6 +917,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.