andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575) 

This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
pull/1/head
Robert F-C 12 years ago
parent
67710df9f3
commit
1292d735ba
7 changed files with 765 additions and 674 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 61
      Marlin/Configuration.h
  2. 14
      Marlin/Marlin.pde
  3. 6
      Marlin/Marlin_main.cpp
  4. 99
      Marlin/pins.h
  5. 9
      Marlin/ultralcd.cpp
  6. 21
      Marlin/ultralcd.h
  7. 187
      Marlin/ultralcd_implementation_hitachi_HD44780.h

61
Marlin/Configuration.h
View File

@ -306,12 +306,21 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// please keep turned on if you can. // please keep turned on if you can.
//#define EEPROM_CHITCHAT //#define EEPROM_CHITCHAT
// Preheat Constants
#define PLA_PREHEAT_HOTEND_TEMP 180
#define PLA_PREHEAT_HPB_TEMP 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240
#define ABS_PREHEAT_HPB_TEMP 100
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
//LCD and SD support //LCD and SD support
//#define ULTRA_LCD //general lcd support, also 16x2 //#define ULTRA_LCD //general lcd support, also 16x2
//#define SDSUPPORT // Enable SD Card Support in Hardware Console //#define SDSUPPORT // Enable SD Card Support in Hardware Console
//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store. //#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
//#define ULTIPANEL //the ultipanel as on thingiverse #define ULTIPANEL //the ultipanel as on thingiverse
// The RepRapDiscount Smart Controller (white PCB) // The RepRapDiscount Smart Controller (white PCB)
// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller
@ -327,15 +336,42 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define NEWPANEL #define NEWPANEL
#endif #endif
// Preheat Constants // I2C PANELS
#define PLA_PREHEAT_HOTEND_TEMP 180
#define PLA_PREHEAT_HPB_TEMP 70
#define PLA_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255
#define ABS_PREHEAT_HOTEND_TEMP 240 #define LCD_I2C_SAINSMART_YWROBOT
#define ABS_PREHEAT_HPB_TEMP 100 #ifdef LCD_I2C_SAINSMART_YWROBOT
#define ABS_PREHEAT_FAN_SPEED 255 // Insert Value between 0 and 255 // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_PCF8575
#define ULTIPANEL
#define NEWPANEL
#define LCD_I2C_ADDRESS 0x27 // I2C Address of the port expander
#endif
// PANELOLU2 LCD with status LEDs, separate encoder and click inputs
//#define LCD_I2C_PANELOLU2
#ifdef LCD_I2C_PANELOLU2
// This uses the LiquidTWI2 library ( https://github.com/lincomatic/LiquidTWI2 ).
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_MCP23017
#define ULTIPANEL
#define NEWPANEL
#define LCD_I2C_ADDRESS 0x20
#define LCD_HAS_I2C_BUZZ //comment out to disable buzzer on LCD
#define LCD_HAS_STATUS_INDICATORS
#endif
// VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
//#define LCD_I2C_VIKI
#ifdef LCD_I2C_VIKI
// This uses the LiquidTWI2 library (https://github.com/lincomatic/LiquidTWI2).
// Make sure it is placed in the Arduino libraries directory.
#define LCD_I2C_TYPE_MCP23017
#define ULTIPANEL
#define NEWPANEL
#define LCD_I2C_ADDRESS 0x20
#define LCD_HAS_STATUS_INDICATORS
#endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
// #define NEWPANEL //enable this if you have a click-encoder panel // #define NEWPANEL //enable this if you have a click-encoder panel
@ -351,15 +387,6 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#endif #endif
#endif #endif
//The LCD is attached via an I2C port expander.
//#define LCD_I2C
#ifdef LCD_I2C
// Port Expander Type - 0=PCF8574 sainsmart/ywrobot
#define LCD_I2C_TYPE 0
// I2C Address of the port expander
#define LCD_I2C_ADDRESS 0x27
#endif
// Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN //#define FAST_PWM_FAN

14
Marlin/Marlin.pde
View File

@ -36,7 +36,21 @@
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
#ifdef LCD_I2C #ifdef LCD_I2C
#include <Wire.h> #include <Wire.h>
#if defined(LCD_I2C_TYPE_PCF8575)
#include <LiquidCrystal_I2C.h> #include <LiquidCrystal_I2C.h>
#elif defined(LCD_I2C_TYPE_MCP23017)
#ifdef PANELOLU2
#undef PANELOLU2
#include <LiquidTWI2.h>
#ifndef PANELOLU2
#error You must uncomment #define PANELOLU2 in LiquidTWI2.h for LiquidTWI2.cpp to compile correctly
#endif
#else
#include <LiquidTWI2.h>
#endif
#else
#error Unknown I2C LCD type
#endif
#else #else
#include <LiquidCrystal.h> #include <LiquidCrystal.h>
#endif #endif

6
Marlin/Marlin_main.cpp
View File

@ -853,13 +853,13 @@ void process_commands()
previous_millis_cmd = millis(); previous_millis_cmd = millis();
if (codenum > 0){ if (codenum > 0){
codenum += millis(); // keep track of when we started waiting codenum += millis(); // keep track of when we started waiting
while(millis() < codenum && !LCD_CLICKED){ while(millis() < codenum && !lcd_clicked()){
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
} }
}else{ }else{
while(!LCD_CLICKED){ while(!lcd_clicked()){
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();
lcd_update(); lcd_update();
@ -1592,7 +1592,7 @@ void process_commands()
delay(100); delay(100);
LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE); LCD_ALERTMESSAGEPGM(MSG_FILAMENTCHANGE);
uint8_t cnt=0; uint8_t cnt=0;
while(!LCD_CLICKED){ while(!lcd_clicked()){
cnt++; cnt++;
manage_heater(); manage_heater();
manage_inactivity(); manage_inactivity();

99
Marlin/pins.h
View File

@ -290,15 +290,6 @@
#define BTN_EN1 11 #define BTN_EN1 11
#define BTN_EN2 10 #define BTN_EN2 10
#define BTN_ENC 12 //the click #define BTN_ENC 12 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif #endif
/**************************************************************************************** /****************************************************************************************
@ -384,16 +375,6 @@
#ifdef ULTRA_LCD #ifdef ULTRA_LCD
#ifdef NEWPANEL #ifdef NEWPANEL
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define BLEN_A 0
#define BLEN_B 1
#define BLEN_C 2
#define LCD_PINS_RS 16 #define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17 #define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23 #define LCD_PINS_D4 23
@ -427,7 +408,7 @@
#else //old style panel with shift register #else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper //arduino pin witch triggers an piezzo beeper
#define BEEPER 33 No Beeper added #define BEEPER 33 // No Beeper added
//buttons are attached to a shift register //buttons are attached to a shift register
// Not wired this yet // Not wired this yet
@ -442,25 +423,6 @@
#define LCD_PINS_D5 25 #define LCD_PINS_D5 25
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif #endif
#endif //ULTRA_LCD #endif //ULTRA_LCD
@ -735,23 +697,12 @@
#define LCD_PINS_D7 27 #define LCD_PINS_D7 27
//The encoder and click button //The encoder and click button
#define BTN_EN1 11 //must be a hardware interrupt pin #define BTN_EN1 11
#define BTN_EN2 10 //must be hardware interrupt pin #define BTN_EN2 10
#define BTN_ENC 16 //the switch #define BTN_ENC 16 //the switch
//not connected to a pin //not connected to a pin
#define SDCARDDETECT -1 #define SDCARDDETECT -1
//from the same bit in the RAMPS Newpanel define
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#endif //Newpanel #endif //Newpanel
#endif //Ultipanel #endif //Ultipanel
@ -834,17 +785,8 @@
#define BTN_EN2 42 #define BTN_EN2 42
#define BTN_ENC 19 //the click #define BTN_ENC 19 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT 38 #define SDCARDDETECT 38
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else //old style panel with shift register #else //old style panel with shift register
//arduino pin witch triggers an piezzo beeper //arduino pin witch triggers an piezzo beeper
#define BEEPER 18 #define BEEPER 18
@ -862,32 +804,7 @@
#define LCD_PINS_D6 20 #define LCD_PINS_D6 20
#define LCD_PINS_D7 19 #define LCD_PINS_D7 19
//encoder rotation values
#ifndef ULTIMAKERCONTROLLER
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else
#define encrot0 0
#define encrot1 1
#define encrot2 3
#define encrot3 2
#endif
#define SDCARDDETECT -1 #define SDCARDDETECT -1
//bits in the shift register that carry the buttons for:
// left up center down right red
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
#endif #endif
#endif //ULTRA_LCD #endif //ULTRA_LCD
@ -1455,17 +1372,7 @@
#define BTN_EN2 64 #define BTN_EN2 64
#define BTN_ENC 43 //the click #define BTN_ENC 43 //the click
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define SDCARDDETECT -1 // Ramps does not use this port #define SDCARDDETECT -1 // Ramps does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif #endif
#endif //ULTRA_LCD #endif //ULTRA_LCD

9
Marlin/ultralcd.cpp
View File

@ -714,6 +714,10 @@ void lcd_update()
lcd_buttons_update(); lcd_buttons_update();
#ifdef LCD_HAS_EXTRA_BUTTONS
buttons |= lcd_read_extra_buttons(); // buttons which take too long to read in interrupt context
#endif
#if (SDCARDDETECT > -1) #if (SDCARDDETECT > -1)
if((IS_SD_INSERTED != lcd_oldcardstatus)) if((IS_SD_INSERTED != lcd_oldcardstatus))
{ {
@ -858,6 +862,11 @@ void lcd_buttons_update()
} }
#endif//ULTIPANEL #endif//ULTIPANEL
bool lcd_clicked()
{
return LCD_CLICKED;
}
/********************************/ /********************************/
/** Float conversion utilities **/ /** Float conversion utilities **/
/********************************/ /********************************/

21
Marlin/ultralcd.h
View File

@ -20,7 +20,6 @@
#ifdef ULTIPANEL #ifdef ULTIPANEL
void lcd_buttons_update(); void lcd_buttons_update();
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#else #else
FORCE_INLINE void lcd_buttons_update() {} FORCE_INLINE void lcd_buttons_update() {}
#endif #endif
@ -33,25 +32,7 @@
extern int absPreheatHPBTemp; extern int absPreheatHPBTemp;
extern int absPreheatFanSpeed; extern int absPreheatFanSpeed;
#ifdef NEWPANEL bool lcd_clicked();
#define EN_C (1<<BLEN_C)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define LCD_CLICKED (buttons&EN_C)
#else
//atomatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
#define B_MI (1<<BL_MI)
#define B_DW (1<<BL_DW)
#define B_RI (1<<BL_RI)
#define B_ST (1<<BL_ST)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define LCD_CLICKED ((buttons&B_MI)||(buttons&B_ST))
#endif//NEWPANEL
#else //no lcd #else //no lcd
FORCE_INLINE void lcd_update() {} FORCE_INLINE void lcd_update() {}

187
Marlin/ultralcd_implementation_hitachi_HD44780.h
View File

@ -6,12 +6,9 @@
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters. * When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
**/ **/
#if LANGUAGE_CHOICE == 6 // Declare LCD class to use
#include "LiquidCrystalRus.h" #if defined(LCD_I2C_TYPE_PCF8575)
#define LCD_CLASS LiquidCrystalRus // note: these are virtual pins on the PCF8575 controller not Arduino pins
#else
#ifdef LCD_I2C
#if LCD_I2C_TYPE = 0
#define LCD_I2C_PIN_BL 3 #define LCD_I2C_PIN_BL 3
#define LCD_I2C_PIN_EN 2 #define LCD_I2C_PIN_EN 2
#define LCD_I2C_PIN_RW 1 #define LCD_I2C_PIN_RW 1
@ -20,16 +17,131 @@
#define LCD_I2C_PIN_D5 5 #define LCD_I2C_PIN_D5 5
#define LCD_I2C_PIN_D6 6 #define LCD_I2C_PIN_D6 6
#define LCD_I2C_PIN_D7 7 #define LCD_I2C_PIN_D7 7
#endif
#include <Wire.h> #include <Wire.h>
#include <LCD.h> #include <LCD.h>
#include <LiquidCrystal_I2C.h> #include <LiquidCrystal_I2C.h>
#define LCD_CLASS LiquidCrystal_I2C #define LCD_CLASS LiquidCrystal_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
#elif defined(LCD_I2C_TYPE_MCP23017)
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
#define LED_A 0x04 //100
#define LED_B 0x02 //010
#define LED_C 0x01 //001
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
LCD_CLASS lcd(LCD_I2C_ADDRESS); //An alternative I2C master address can be used in place of "0"
#elif defined(LCD_I2C_TYPE_MCP23008)
#include <Wire.h>
#include <LiquidTWI2.h>
#define LCD_CLASS LiquidTWI2
LCD_CLASS lcd(LCD_I2C_ADDRESS); //An alternative I2C master address can be used in place of "0"
#else
#if LANGUAGE_CHOICE == 6
#include "LiquidCrystalRus.h"
#define LCD_CLASS LiquidCrystalRus
#else #else
#include <LiquidCrystal.h> #include <LiquidCrystal.h>
#define LCD_CLASS LiquidCrystal #define LCD_CLASS LiquidCrystal
#endif #endif
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
// provide default button bitmask and encoder definitions (note this is not pin or motherboard specific)
#ifdef LCD_I2C_VIKI
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define EN_C (1<<BLEN_C) // The stop/pause/resume button comes through BTN_ENC pin (for consistency with NEWPANEL code)
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
#define EN_A (1<<BLEN_A)
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
// button and encoder bit positions within 'buttons'
#define B_ST (EN_C) // The pause/stop/resume button is mapped to EN_C for consistency with NEWPANEL
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining buttons are I2C read buttons.
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
// I2C buttons are likely to take too long to read inside interrupt context and so we read them during lcd_update
#define LCD_HAS_EXTRA_BUTTONS
#elif defined(NEWPANEL)
//from the same bit in the RAMPS Newpanel define
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define BLEN_C 2
#define BLEN_B 1
#define BLEN_A 0
#define EN_C (1<<BLEN_C)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define LCD_CLICKED (buttons&EN_C)
#else // old style ULTIPANEL
//encoder rotation values
#ifndef ULTIMAKERCONTROLLER
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else
#define encrot0 0
#define encrot1 1
#define encrot2 3
#define encrot3 2
#endif
//bits in the shift register that carry the buttons for:
// left up center down right red(stop)
#define BL_LE 7
#define BL_UP 6
#define BL_MI 5
#define BL_DW 4
#define BL_RI 3
#define BL_ST 2
#define BLEN_B 1
#define BLEN_A 0
//automatic, do not change
#define B_LE (1<<BL_LE)
#define B_UP (1<<BL_UP)
#define B_MI (1<<BL_MI)
#define B_DW (1<<BL_DW)
#define B_RI (1<<BL_RI)
#define B_ST (1<<BL_ST)
#define EN_B (1<<BLEN_B)
#define EN_A (1<<BLEN_A)
#define LCD_CLICKED (buttons&(B_MI|B_ST))
#endif//else NEWPANEL
#ifdef LCD_HAS_STATUS_INDICATORS
//forward declaration
static void lcd_implementation_update_indicators();
#endif #endif
/* Custom characters defined in the first 8 characters of the LCD */ /* Custom characters defined in the first 8 characters of the LCD */
@ -43,12 +155,6 @@
#define LCD_STR_CLOCK "\x07" #define LCD_STR_CLOCK "\x07"
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */ #define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
#ifdef LCD_I2C
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
#else
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
#endif
static void lcd_implementation_init() static void lcd_implementation_init()
{ {
byte bedTemp[8] = byte bedTemp[8] =
@ -135,14 +241,23 @@ static void lcd_implementation_init()
B00000 B00000
}; //thanks Sonny Mounicou }; //thanks Sonny Mounicou
#ifdef LCD_I2C #if defined(LCDI2C_TYPE_PCF8575)
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#ifdef LCD_I2C_PIN_BL #ifdef LCD_I2C_PIN_BL
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE); lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
lcd.setBacklight(HIGH); lcd.setBacklight(HIGH);
#endif #endif
#endif #elif defined(LCD_I2C_TYPE_MCP23017)
lcd.setMCPType(LTI_TYPE_MCP23017);
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
lcd.setBacklight(0); //set all the LEDs off to begin with
#elif defined(LCD_I2C_TYPE_MCP23008)
lcd.setMCPType(LTI_TYPE_MCP23008);
lcd.begin(LCD_WIDTH, LCD_HEIGHT); lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#else
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
#endif
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp); lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
lcd.createChar(LCD_STR_DEGREE[0], degree); lcd.createChar(LCD_STR_DEGREE[0], degree);
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer); lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
@ -324,6 +439,9 @@ static void lcd_implementation_status_screen()
//Status message line on the last line //Status message line on the last line
lcd.setCursor(0, LCD_HEIGHT - 1); lcd.setCursor(0, LCD_HEIGHT - 1);
lcd.print(lcd_status_message); lcd.print(lcd_status_message);
#ifdef LCD_HAS_STATUS_INDICATORS
lcd_implementation_update_indicators();
#endif
} }
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char) static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
{ {
@ -512,7 +630,9 @@ static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pst
static void lcd_implementation_quick_feedback() static void lcd_implementation_quick_feedback()
{ {
#if BEEPER > -1 #ifdef LCD_HAS_I2C_BUZZ
lcd.buzz(300,4000);
#elif defined(BEEPER) && BEEPER > -1
SET_OUTPUT(BEEPER); SET_OUTPUT(BEEPER);
for(int8_t i=0;i<10;i++) for(int8_t i=0;i<10;i++)
{ {
@ -523,4 +643,37 @@ static void lcd_implementation_quick_feedback()
} }
#endif #endif
} }
#ifdef LCD_HAS_STATUS_INDICATORS
static void lcd_implementation_update_indicators()
{
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
//set the LEDS - referred to as backlights by the LiquidTWI2 library
static uint8_t ledsprev = 0;
uint8_t leds = 0;
if (isHeatingBed()) leds |= LED_A;
if (isHeatingHotend(0)) leds |= LED_B;
if (fanSpeed) leds |= LED_C;
#if EXTRUDERS > 1
if (isHeatingHotend(1)) leds |= LED_C;
#endif
if (leds != ledsprev) {
lcd.setBacklight(leds);
ledsprev = leds;
}
#endif
}
#endif
#ifdef LCD_HAS_EXTRA_BUTTONS
static uint8_t lcd_read_extra_buttons()
{
#ifdef LCD_I2C_TYPE_MCP23017
// the I2C button bit positions are shifted by three bits from the native LiquidTWI2 position
// this is potentially too slow to call inside interrupt context
return lcd.readButtons() << B_I2C_BTN_OFFSET;
#endif
}
#endif
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H

Write Preview
Loading…
Cancel
Save