More explicit EEPROM types (#17127)

Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp

@@ -54,7 +54,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)
+#if ENABLED(FLASH_EEPROM_EMULATION)
 
 #include "../shared/Marduino.h"
 #include "../shared/persistent_store_api.h"
@@ -1016,5 +1016,5 @@ void eeprom_flush() {
   ee_Flush();
 }
 
-#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
+#endif // FLASH_EEPROM_EMULATION
 #endif // ARDUINO_ARCH_AVR

Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h

@@ -20,3 +20,9 @@
  *
  */
 #pragma once
+
+#if USE_EMULATED_EEPROM
+  #undef SRAM_EEPROM_EMULATION
+  #undef SDCARD_EEPROM_EMULATION
+  #define FLASH_EEPROM_EMULATION 1
+#endif

Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp

@@ -29,7 +29,7 @@
 #include "../../inc/MarlinConfig.h"
 #include "../shared/persistent_store_api.h"
 
-#if !defined(E2END) && NONE(I2C_EEPROM, SPI_EEPROM)
+#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
   #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
 #endif
 
@@ -38,7 +38,7 @@ extern void eeprom_flush();
 bool PersistentStore::access_start() { return true; }
 
 bool PersistentStore::access_finish() {
-  #if NONE(I2C_EEPROM, SPI_EEPROM)
+  #if ENABLED(FLASH_EEPROM_EMULATION)
     eeprom_flush();
   #endif
   return true;

Marlin/src/HAL/HAL_LPC1768/inc/Conditionals_post.h

@@ -20,3 +20,11 @@
  *
  */
 #pragma once
+
+#if ENABLED(EEPROM_SETTINGS)
+  #undef USE_REAL_EEPROM
+  #define USE_EMULATED_EEPROM 1
+  #if DISABLED(FLASH_EEPROM_EMULATION)
+    #define SDCARD_EEPROM_EMULATION 1
+  #endif
+#endif

Marlin/src/HAL/HAL_LPC1768/persistent_store_flash.cpp

@@ -38,13 +38,11 @@
  */
 #include "../../inc/MarlinConfigPre.h"
 
-#if ENABLED(EEPROM_SETTINGS)
+#if ENABLED(FLASH_EEPROM_EMULATION)
 
 #include "persistent_store_api.h"
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(FLASH_EEPROM_EMULATION)
-
 extern "C" {
   #include <lpc17xx_iap.h>
 }
@@ -128,5 +126,4 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
 size_t PersistentStore::capacity() { return EEPROM_SIZE; }
 
 #endif // FLASH_EEPROM_EMULATION
-#endif // EEPROM_SETTINGS
 #endif // TARGET_LPC1768

Marlin/src/HAL/HAL_LPC1768/persistent_store_sdcard.cpp

@@ -22,15 +22,12 @@
  */
 #ifdef TARGET_LPC1768
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS)
+#if ENABLED(SDCARD_EEPROM_EMULATION)
 
-#include "../../inc/MarlinConfig.h"
 #include "persistent_store_api.h"
 
-#if DISABLED(FLASH_EEPROM_EMULATION)
-
 #include <chanfs/diskio.h>
 #include <chanfs/ff.h>
 
@@ -178,6 +175,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uin
 
 size_t PersistentStore::capacity() { return 4096; } // 4KiB of Emulated EEPROM
 
-#endif // !FLASH_EEPROM_EMULATION
-#endif // EEPROM_SETTINGS
+#endif // SDCARD_EEPROM_EMULATION
 #endif // TARGET_LPC1768

Marlin/src/HAL/HAL_SAMD51/inc/Conditionals_post.h

@@ -20,3 +20,9 @@
  *
  */
 #pragma once
+
+#if USE_EMULATED_EEPROM
+  #undef SRAM_EEPROM_EMULATION
+  #undef SDCARD_EEPROM_EMULATION
+  #define FLASH_EEPROM_EMULATION 1
+#endif

Marlin/src/HAL/HAL_SAMD51/inc/SanityCheck.h

@@ -23,7 +23,7 @@
  * Test SAMD51 specific configuration values for errors at compile-time.
  */
 
-#if ENABLED(EEPROM_SETTINGS) && NONE(SPI_EEPROM, I2C_EEPROM)
+#if ENABLED(FLASH_EEPROM_EMULATION)
   #warning "Did you activate the SmartEEPROM? See https://github.com/GMagician/SAMD51-SmartEEprom-Manager/releases"
 #endif
 

Marlin/src/HAL/HAL_SAMD51/persistent_store_eeprom.cpp

@@ -27,7 +27,7 @@
 
 #include "../shared/persistent_store_api.h"
 
-#if NONE(SPI_EEPROM, I2C_EEPROM)
+#if ENABLED(FLASH_EEPROM_EMULATION)
   #define NVMCTRL_CMD(c)    do{                                                 \
                               SYNC(!NVMCTRL->STATUS.bit.READY);                 \
                               NVMCTRL->INTFLAG.bit.DONE = true;                 \
@@ -41,7 +41,7 @@
 #endif
 
 bool PersistentStore::access_start() {
-  #if NONE(SPI_EEPROM, I2C_EEPROM)
+  #if ENABLED(FLASH_EEPROM_EMULATION)
     NVMCTRL->SEECFG.reg = NVMCTRL_SEECFG_WMODE_BUFFERED;  // Buffered mode and segment reallocation active
   #endif
 
@@ -49,7 +49,7 @@ bool PersistentStore::access_start() {
 }
 
 bool PersistentStore::access_finish() {
-  #if NONE(SPI_EEPROM, I2C_EEPROM)
+  #if ENABLED(FLASH_EEPROM_EMULATION)
     NVMCTRL_FLUSH();
     if (!NVMCTRL->SEESTAT.bit.LOCK)
       NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_LSEE);    // Lock E2P data write access
@@ -59,14 +59,20 @@ bool PersistentStore::access_finish() {
 }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  #if NONE(SPI_EEPROM, I2C_EEPROM)
+  #if ENABLED(FLASH_EEPROM_EMULATION)
     if (NVMCTRL->SEESTAT.bit.RLOCK)
       NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_USEE);    // Unlock E2P data write access
   #endif
 
   while (size--) {
     const uint8_t v = *value;
-    #if ANY(SPI_EEPROM, I2C_EEPROM)
+    #if ENABLED(FLASH_EEPROM_EMULATION)
+      SYNC(NVMCTRL->SEESTAT.bit.BUSY);
+      if (NVMCTRL->INTFLAG.bit.SEESFULL)
+        NVMCTRL_FLUSH();      // Next write will trigger a sector reallocation. I need to flush 'pagebuffer'
+      ((volatile uint8_t *)SEEPROM_ADDR)[pos] = v;
+      SYNC(!NVMCTRL->INTFLAG.bit.SEEWRC);
+    #else
       uint8_t * const p = (uint8_t * const)pos;
       if (v != eeprom_read_byte(p)) {
         eeprom_write_byte(p, v);
@@ -76,12 +82,6 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
           return true;
         }
       }
-    #else
-      SYNC(NVMCTRL->SEESTAT.bit.BUSY);
-      if (NVMCTRL->INTFLAG.bit.SEESFULL)
-        NVMCTRL_FLUSH();      // Next write will trigger a sector reallocation. I need to flush 'pagebuffer'
-      ((volatile uint8_t *)SEEPROM_ADDR)[pos] = v;
-      SYNC(!NVMCTRL->INTFLAG.bit.SEEWRC);
     #endif
     crc16(crc, &v, 1);
     pos++;
@@ -93,11 +93,11 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   while (size--) {
     uint8_t c;
-    #if ANY(SPI_EEPROM, I2C_EEPROM)
-      c = eeprom_read_byte((uint8_t*)pos);
-    #else
+    #if ENABLED(FLASH_EEPROM_EMULATION)
       SYNC(NVMCTRL->SEESTAT.bit.BUSY);
       c = ((volatile uint8_t *)SEEPROM_ADDR)[pos];
+    #else
+      c = eeprom_read_byte((uint8_t*)pos);
     #endif
     if (writing) *value = c;
     crc16(crc, &c, 1);
@@ -108,9 +108,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
 }
 
 size_t PersistentStore::capacity() {
-  #if ANY(SPI_EEPROM, I2C_EEPROM)
-    return E2END + 1;
-  #else
+  #if ENABLED(FLASH_EEPROM_EMULATION)
     const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
                   sblk = NVMCTRL->SEESTAT.bit.SBLK;
 
@@ -121,6 +119,8 @@ size_t PersistentStore::capacity() {
     else if (sblk <= 4 || psz == 5) return 16384;
     else if (sblk >= 9 && psz == 7) return 65536;
     else                            return 32768;
+  #else
+    return E2END + 1;
   #endif
 }
 

Marlin/src/HAL/HAL_STM32/persistent_store_impl.cpp

@@ -24,7 +24,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) && ANY(SRAM_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+#if EITHER(USE_REAL_EEPROM, SRAM_EEPROM_EMULATION)
 
 #include "../shared/persistent_store_api.h"
 
@@ -41,7 +41,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     uint8_t v = *value;
 
     // Save to either external EEPROM, program flash or Backup SRAM
-    #if EITHER(SPI_EEPROM, I2C_EEPROM)
+    #if USE_REAL_EEPROM
       // EEPROM has only ~100,000 write cycles,
       // so only write bytes that have changed!
       uint8_t * const p = (uint8_t * const)pos;
@@ -68,7 +68,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   do {
     // Read from either external EEPROM, program flash or Backup SRAM
     const uint8_t c = (
-      #if EITHER(SPI_EEPROM, I2C_EEPROM)
+      #if USE_REAL_EEPROM
         eeprom_read_byte((uint8_t*)pos)
       #else
         (*(__IO uint8_t *)(BKPSRAM_BASE + ((uint8_t*)pos)))
@@ -85,13 +85,13 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
 
 size_t PersistentStore::capacity() {
   return (
-    #if ENABLED(SRAM_EEPROM_EMULATION)
-      4096 // 4kB
-    #else
+    #if USE_REAL_EEPROM
       E2END + 1
+    #else
+      4096 // 4kB
     #endif
   );
 }
 
-#endif // EEPROM_SETTINGS && (SRAM_EEPROM_EMULATION || SPI_EEPROM || I2C_EEPROM)
+#endif // USE_REAL_EEPROM || SRAM_EEPROM_EMULATION
 #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC

Marlin/src/HAL/HAL_STM32/persistent_store_sdcard.cpp

@@ -28,7 +28,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) && NONE(FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+#if ENABLED(SDCARD_EEPROM_EMULATION)
 
 #include "../shared/persistent_store_api.h"
 
@@ -99,5 +99,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uin
 
 size_t PersistentStore::capacity() { return HAL_EEPROM_SIZE; }
 
-#endif // EEPROM_SETTINGS
-#endif // STM32
+#endif // SDCARD_EEPROM_EMULATION
+#endif // STM32 && !STM32GENERIC

Marlin/src/HAL/HAL_STM32F1/persistent_store_eeprom.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) && EITHER(SPI_EEPROM, I2C_EEPROM)
+#if USE_REAL_EEPROM
 
 #include "../shared/persistent_store_api.h"
 
@@ -73,5 +73,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
 
 size_t PersistentStore::capacity() { return E2END + 1; }
 
-#endif // EEPROM_SETTINGS && EITHER(SPI_EEPROM, I2C_EEPROM)
+#endif // USE_REAL_EEPROM
 #endif // __STM32F1__

Marlin/src/HAL/HAL_STM32F1/persistent_store_sdcard.cpp

@@ -29,7 +29,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS) && NONE(FLASH_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+#if ENABLED(SDCARD_EEPROM_EMULATION)
 
 #include "../shared/persistent_store_api.h"
 
@@ -100,6 +100,6 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uin
 
 size_t PersistentStore::capacity() { return HAL_EEPROM_SIZE; }
 
-#endif // EEPROM_SETTINGS
+#endif // SDCARD_EEPROM_EMULATION
 
 #endif // __STM32F1__

Marlin/src/HAL/HAL_STM32_F4_F7/EmulatedEeprom.cpp

@@ -27,13 +27,7 @@
 // Include configs and pins to get all EEPROM flags
 #include "../../inc/MarlinConfig.h"
 
-#ifdef STM32F7
-  #define HAS_EMULATED_EEPROM 1
-#else
-  #define HAS_EMULATED_EEPROM NONE(I2C_EEPROM, SPI_EEPROM)
-#endif
-
-#if HAS_EMULATED_EEPROM && ENABLED(EEPROM_SETTINGS)
+#if ENABLED(FLASH_EEPROM_EMULATION)
 
 // ------------------------
 // Includes
@@ -118,5 +112,5 @@ void eeprom_update_block(const void *__src, void *__dst, size_t __n) {
 
 }
 
-#endif // EEPROM_SETTINGS
+#endif // FLASH_EEPROM_EMULATION
 #endif // STM32GENERIC && (STM32F4 || STM32F7)

Marlin/src/HAL/HAL_STM32_F4_F7/inc/Conditionals_post.h

@@ -20,3 +20,11 @@
  *
  */
 #pragma once
+
+#if ENABLED(EEPROM_SETTINGS) && defined(STM32F7)
+  #undef USE_REAL_EEPROM
+  #define USE_EMULATED_EEPROM 1
+  #undef SRAM_EEPROM_EMULATION
+  #undef SDCARD_EEPROM_EMULATION
+  #define FLASH_EEPROM_EMULATION 1
+#endif

Marlin/src/inc/Conditionals_post.h

@@ -35,6 +35,23 @@
   #define HAS_LINEAR_E_JERK 1
 #endif
 
+#if ENABLED(EEPROM_SETTINGS)
+  #if NONE(FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION, SDCARD_EEPROM_EMULATION) && EITHER(I2C_EEPROM, SPI_EEPROM)
+    #define USE_REAL_EEPROM 1
+  #else
+    #define USE_EMULATED_EEPROM 1
+  #endif
+  #if NONE(USE_REAL_EEPROM, FLASH_EEPROM_EMULATION, SRAM_EEPROM_EMULATION)
+    #define SDCARD_EEPROM_EMULATION 1
+  #endif
+#else
+  #undef I2C_EEPROM
+  #undef SPI_EEPROM
+  #undef SDCARD_EEPROM_EMULATION
+  #undef SRAM_EEPROM_EMULATION
+  #undef FLASH_EEPROM_EMULATION
+#endif
+
 #ifdef TEENSYDUINO
   #undef max
   #define max(a,b) ((a)>(b)?(a):(b))

Marlin/src/module/printcounter.h

@@ -28,7 +28,7 @@
 // Print debug messages with M111 S2
 //#define DEBUG_PRINTCOUNTER
 
-#if EITHER(I2C_EEPROM, SPI_EEPROM)
+#if USE_REAL_EEPROM
   // round up address to next page boundary (assuming 32 byte pages)
   #define STATS_EEPROM_ADDRESS 0x40
 #else
@@ -57,7 +57,7 @@ class PrintCounter: public Stopwatch {
   private:
     typedef Stopwatch super;
 
-    #if EITHER(I2C_EEPROM, SPI_EEPROM) || defined(CPU_32_BIT)
+    #if USE_REAL_EEPROM || defined(CPU_32_BIT)
       typedef uint32_t eeprom_address_t;
     #else
       typedef uint16_t eeprom_address_t;

Marlin/src/sd/cardreader.cpp

@@ -370,7 +370,7 @@ void CardReader::mount() {
   else {
     flag.mounted = true;
     SERIAL_ECHO_MSG(STR_SD_CARD_OK);
-    #if ENABLED(EEPROM_SETTINGS) && NONE(FLASH_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+    #if ENABLED(SDCARD_EEPROM_EMULATION)
       settings.first_load();
     #endif
   }
@@ -622,7 +622,7 @@ void CardReader::checkautostart() {
   if (autostart_index < 0 || flag.sdprinting) return;
 
   if (!isMounted()) mount();
-  #if ENABLED(EEPROM_SETTINGS) && NONE(FLASH_EEPROM_EMULATION, SPI_EEPROM, I2C_EEPROM)
+  #if ENABLED(SDCARD_EEPROM_EMULATION)
     else settings.first_load();
   #endif