Patches to prepare REPRAPWORLD_GRAPHICAL_LCD

Marlin/Conditionals.h

@@ -118,7 +118,11 @@
     #define REPRAP_DISCOUNT_SMART_CONTROLLER
   #endif
 
-  #if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(RIGIDBOT_PANEL) || ENABLED(REPRAPWORLD_KEYPAD)
+  #if ENABLED(ULTIMAKERCONTROLLER)              \
+   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
+   || ENABLED(G3D_PANEL)                        \
+   || ENABLED(RIGIDBOT_PANEL)                   \
+   || ENABLED(REPRAPWORLD_KEYPAD)
     #define ULTIPANEL
     #define NEWPANEL
   #endif
@@ -130,11 +134,11 @@
     #define NEWPANEL
   #endif
 
-
   #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
     #define DOGLCD
     #define U8GLIB_ST7920
     #define ULTIPANEL
+    #define NEWPANEL
   #endif
 
   /**

Marlin/Configuration.h

@@ -1124,7 +1124,6 @@
 //
 //#define REPRAPWORLD_GRAPHICAL_LCD
 
-
 //
 // Activate one of these if you have a Panucatt Devices
 // Viki 2.0 or mini Viki with Graphic LCD

Marlin/pins_MEGATRONICS_3.h

@@ -106,26 +106,17 @@
 
 #define BEEPER_PIN 61
 
-
-
-
 #if ENABLED(DOGLCD)
 
   #if ENABLED(U8GLIB_ST7920)
-    
     #define LCD_PINS_RS     56 //CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE 51 //SID (MOSI)
     #define LCD_PINS_D4     52 //SCK (CLK) clock
-
-        #define BTN_EN1             44
-        #define BTN_EN2             45
-        #define BTN_ENC             33
-
-        
     #define SD_DETECT_PIN 35
   #endif
 
 #else
+
   #define LCD_PINS_RS 32
   #define LCD_PINS_ENABLE 31
   #define LCD_PINS_D4 14
@@ -137,25 +128,16 @@
   #define SHIFT_LD 35
   #define SHIFT_OUT 34
   #define SHIFT_EN 44
-  //buttons are directly attached using keypad
-  #define BTN_EN1 44
-  #define BTN_EN2 45
-  #define BTN_ENC 33 //the click
-
-  #define BLEN_C 2
-  #define BLEN_B 1
-  #define BLEN_A 0
 
   #define SD_DETECT_PIN 56 // Megatronics v3.1 only
-#endif
 
+#endif
 
 // Buttons are directly attached using keypad
 #define BTN_EN1 44
 #define BTN_EN2 45
-#define BTN_ENC 33 // the click
+#define BTN_ENC 33
 
 #define BLEN_C 2
 #define BLEN_B 1
 #define BLEN_A 0
-

Marlin/pins_MINITRONICS.h

@@ -76,12 +76,9 @@
 
 #define BEEPER_PIN -1
 
-
-
 #if ENABLED(DOGLCD)
 
   #if ENABLED(U8GLIB_ST7920)
-    
     #define LCD_PINS_RS     15 //CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE 11 //SID (MOSI)
     #define LCD_PINS_D4     10 //SCK (CLK) clock     
@@ -90,11 +87,11 @@
     #define BTN_EN2 17
     #define BTN_ENC 25
 
-        
     #define SD_DETECT_PIN 30
   #endif
 
 #else
+
   #define LCD_PINS_RS -1
   #define LCD_PINS_ENABLE -1
   #define LCD_PINS_D4 -1
@@ -105,11 +102,12 @@
   // Buttons are directly attached using keypad
   #define BTN_EN1 -1
   #define BTN_EN2 -1
-#define BTN_ENC -1 // the click
+  #define BTN_ENC -1
 
   #define BLEN_C 2
   #define BLEN_B 1
   #define BLEN_A 0
 
   #define SD_DETECT_PIN -1  // Minitronics doesn't use this
+
 #endif

Marlin/pins_RAMPS_14.h

@@ -139,25 +139,13 @@
   #define SLED_PIN           -1
 #endif
 
-
+#if ENABLED(ULTRA_LCD)
 
   #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-
-
     #define LCD_PINS_RS     49 //CS chip select /SS chip slave select
     #define LCD_PINS_ENABLE 51 //SID (MOSI)
     #define LCD_PINS_D4     52 //SCK (CLK) clock
-
+  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
-  #define BTN_EN1             64
-  #define BTN_EN2             59
-  #define BTN_ENC             63
-
-  
-  #define SD_DETECT_PIN 42
-
-#elif ENABLED(ULTRA_LCD)
-
-  #if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
     #define LCD_PINS_RS 40
     #define LCD_PINS_ENABLE 42
     #define LCD_PINS_D4 65
@@ -198,6 +186,11 @@
         #define LCD_PIN_BL 39
       #endif
 
+    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+      #define BTN_EN1 64
+      #define BTN_EN2 59
+      #define BTN_ENC 63
+      #define SD_DETECT_PIN 42
     #elif ENABLED(LCD_I2C_PANELOLU2)
       #define BTN_EN1 47  // reverse if the encoder turns the wrong way.
       #define BTN_EN2 43