chzj333
5 years ago
committed by
Scott Lahteine
Scott Lahteine
6 changed files with 358 additions and 11 deletions
@ -0,0 +1,254 @@ |
|||||
|
/**
|
||||
|
* Marlin 3D Printer Firmware |
||||
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
|
* |
||||
|
* Based on Sprinter and grbl. |
||||
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
||||
|
* |
||||
|
* This program is free software: you can redistribute it and/or modify |
||||
|
* it under the terms of the GNU General Public License as published by |
||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||
|
* (at your option) any later version. |
||||
|
* |
||||
|
* This program is distributed in the hope that it will be useful, |
||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
|
* GNU General Public License for more details. |
||||
|
* |
||||
|
* You should have received a copy of the GNU General Public License |
||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
* |
||||
|
*/ |
||||
|
#pragma once |
||||
|
|
||||
|
#ifndef TARGET_STM32F4 |
||||
|
#error "Oops! Select an STM32F4 board in 'Tools > Board.'" |
||||
|
#elif HOTENDS > 3 || E_STEPPERS > 3 |
||||
|
#error "BIGTREE SKR Pro V1.1 supports up to 3 hotends / E-steppers." |
||||
|
#endif |
||||
|
|
||||
|
#define BOARD_NAME "BIGTREE Btt002 1.0" |
||||
|
|
||||
|
#define SRAM_EEPROM_EMULATION |
||||
|
|
||||
|
// Ignore temp readings during development.
|
||||
|
//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000
|
||||
|
|
||||
|
//
|
||||
|
// Servos
|
||||
|
//
|
||||
|
#define SERVO0_PIN PC3 |
||||
|
|
||||
|
//
|
||||
|
// Limit Switches
|
||||
|
//
|
||||
|
#define X_MIN_PIN PD3 |
||||
|
#define X_MAX_PIN PD3 |
||||
|
#define Y_MIN_PIN PD2 |
||||
|
#define Y_MAX_PIN PD2 |
||||
|
#define Z_MIN_PIN PD1 |
||||
|
#define Z_MAX_PIN PD1 |
||||
|
|
||||
|
//
|
||||
|
// Z Probe must be this pins ##
|
||||
|
//
|
||||
|
#ifndef Z_MIN_PROBE_PIN |
||||
|
#define Z_MIN_PROBE_PIN PD1 |
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Steppers
|
||||
|
//
|
||||
|
#define X_STEP_PIN PA9 |
||||
|
#define X_DIR_PIN PA10 |
||||
|
#define X_ENABLE_PIN PA8 |
||||
|
#ifndef X_CS_PIN |
||||
|
#define X_CS_PIN PE2 |
||||
|
#endif |
||||
|
|
||||
|
#define Y_STEP_PIN PC8 |
||||
|
#define Y_DIR_PIN PC9 |
||||
|
#define Y_ENABLE_PIN PC7 |
||||
|
#ifndef Y_CS_PIN |
||||
|
#define Y_CS_PIN PE3 |
||||
|
#endif |
||||
|
|
||||
|
#define Z_STEP_PIN PD15 |
||||
|
#define Z_DIR_PIN PC6 |
||||
|
#define Z_ENABLE_PIN PD14 |
||||
|
#ifndef Z_CS_PIN |
||||
|
#define Z_CS_PIN PE4 |
||||
|
#endif |
||||
|
|
||||
|
#define E0_STEP_PIN PD12 |
||||
|
#define E0_DIR_PIN PD13 |
||||
|
#define E0_ENABLE_PIN PD11 |
||||
|
#ifndef E0_CS_PIN |
||||
|
#define E0_CS_PIN PD7 |
||||
|
#endif |
||||
|
|
||||
|
/*
|
||||
|
//SKR_PRO_V1.1
|
||||
|
#define E1_STEP_PIN PD15 |
||||
|
#define E1_DIR_PIN PE7 |
||||
|
#define E1_ENABLE_PIN PA3 |
||||
|
#ifndef E1_CS_PIN |
||||
|
#define E1_CS_PIN PG15 |
||||
|
#endif |
||||
|
|
||||
|
#define E2_STEP_PIN PD13 |
||||
|
#define E2_DIR_PIN PG9 |
||||
|
#define E2_ENABLE_PIN PF0 |
||||
|
#ifndef E2_CS_PIN |
||||
|
#define E2_CS_PIN PG12 |
||||
|
#endif |
||||
|
*/ |
||||
|
//
|
||||
|
// Software SPI pins for TMC2130 stepper drivers
|
||||
|
//
|
||||
|
#if ENABLED(TMC_USE_SW_SPI) |
||||
|
#ifndef TMC_SW_MOSI |
||||
|
#define TMC_SW_MOSI PB15 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_MISO |
||||
|
#define TMC_SW_MISO PB14 |
||||
|
#endif |
||||
|
#ifndef TMC_SW_SCK |
||||
|
#define TMC_SW_SCK PB13 |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#if HAS_TMC220x |
||||
|
/**
|
||||
|
* TMC2208/TMC2209 stepper drivers |
||||
|
* |
||||
|
* Hardware serial communication ports. |
||||
|
* If undefined software serial is used according to the pins below |
||||
|
*/ |
||||
|
//#define X_HARDWARE_SERIAL Serial1
|
||||
|
//#define X2_HARDWARE_SERIAL Serial1
|
||||
|
//#define Y_HARDWARE_SERIAL Serial1
|
||||
|
//#define Y2_HARDWARE_SERIAL Serial1
|
||||
|
//#define Z_HARDWARE_SERIAL Serial1
|
||||
|
//#define Z2_HARDWARE_SERIAL Serial1
|
||||
|
//#define E0_HARDWARE_SERIAL Serial1
|
||||
|
//#define E1_HARDWARE_SERIAL Serial1
|
||||
|
//#define E2_HARDWARE_SERIAL Serial1
|
||||
|
//#define E3_HARDWARE_SERIAL Serial1
|
||||
|
//#define E4_HARDWARE_SERIAL Serial1
|
||||
|
|
||||
|
//
|
||||
|
// Software serial ##
|
||||
|
//
|
||||
|
#define X_SERIAL_TX_PIN PE2 |
||||
|
#define X_SERIAL_RX_PIN PE2 |
||||
|
|
||||
|
#define Y_SERIAL_TX_PIN PE3 |
||||
|
#define Y_SERIAL_RX_PIN PE3 |
||||
|
|
||||
|
#define Z_SERIAL_TX_PIN PE4 |
||||
|
#define Z_SERIAL_RX_PIN PE4 |
||||
|
|
||||
|
#define E0_SERIAL_TX_PIN PD7 |
||||
|
#define E0_SERIAL_RX_PIN PD7 |
||||
|
|
||||
|
//#define E1_SERIAL_TX_PIN PD1
|
||||
|
//#define E1_SERIAL_RX_PIN PD1
|
||||
|
|
||||
|
//#define E2_SERIAL_TX_PIN PD6
|
||||
|
//#define E2_SERIAL_RX_PIN PD6
|
||||
|
#endif |
||||
|
|
||||
|
//
|
||||
|
// Temperature Sensors
|
||||
|
//
|
||||
|
#define TEMP_0_PIN PA2 // T1 <-> E0
|
||||
|
#define TEMP_1_PIN PA0 // T2 <-> E1
|
||||
|
//#define TEMP_2_PIN PC2 // T3 <-> E2 SKR_PRO
|
||||
|
#define TEMP_BED_PIN PA1 // T0 <-> Bed
|
||||
|
|
||||
|
//
|
||||
|
// Heaters / Fans
|
||||
|
//
|
||||
|
#define HEATER_0_PIN PE6 // Heater0
|
||||
|
//#define HEATER_1_PIN PD14 // Heater1
|
||||
|
//#define HEATER_2_PIN PB0 // Heater1
|
||||
|
#define HEATER_BED_PIN PE5 // Hotbed
|
||||
|
#define FAN_PIN PB9 // Fan0
|
||||
|
#define FAN1_PIN PB8 // Fan1
|
||||
|
//#define FAN2_PIN PE6 // Fan2
|
||||
|
|
||||
|
// HAL SPI pins group
|
||||
|
#define SCK_PIN PA5 // SPI SCLK
|
||||
|
#define MYSSEL PA4 // SPI SSEL
|
||||
|
#define MISO_PIN PA6 // SPI MISO
|
||||
|
#define MOSI_PIN PA7 // SPI MOSI
|
||||
|
|
||||
|
//
|
||||
|
// Misc. Functions
|
||||
|
//
|
||||
|
#define SDSS PA4 |
||||
|
|
||||
|
/**
|
||||
|
* -------------------------------------SKR_MK3----------------------------------------------- |
||||
|
* _____ _____ | |
||||
|
* PA3 | · · | GND 5V | · · | GND | |
||||
|
* NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) | |
||||
|
* (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) | |
||||
|
* (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) | |
||||
|
* (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) | |
||||
|
* ￣￣ ￣￣ | |
||||
|
* EXP2 EXP1 | |
||||
|
* --------------------------------------------------------------------------------------------- |
||||
|
*/ |
||||
|
//
|
||||
|
// LCDs and Controllers
|
||||
|
//
|
||||
|
#if HAS_SPI_LCD |
||||
|
#define BEEPER_PIN PE7 |
||||
|
#define BTN_ENC PB1 |
||||
|
|
||||
|
#if ENABLED(CR10_STOCKDISPLAY) |
||||
|
#define LCD_PINS_RS PE12 |
||||
|
|
||||
|
#define BTN_EN1 PE9 |
||||
|
#define BTN_EN2 PE10 |
||||
|
|
||||
|
#define LCD_PINS_ENABLE PE13 |
||||
|
#define LCD_PINS_D4 PE11 |
||||
|
|
||||
|
#else |
||||
|
|
||||
|
#define LCD_PINS_RS PE8 |
||||
|
|
||||
|
#define BTN_EN1 PC5 |
||||
|
#define BTN_EN2 PB0 |
||||
|
#define SD_DETECT_PIN PC4 |
||||
|
|
||||
|
#define LCD_SDSS PA4 |
||||
|
|
||||
|
#define LCD_PINS_ENABLE PE9 |
||||
|
#define LCD_PINS_D4 PE10 |
||||
|
|
||||
|
#if ENABLED(ULTIPANEL) |
||||
|
#define LCD_PINS_D5 PE11 |
||||
|
#define LCD_PINS_D6 PE12 |
||||
|
#define LCD_PINS_D7 PE13 |
||||
|
#endif |
||||
|
|
||||
|
#endif |
||||
|
|
||||
|
// Alter timing for graphical display
|
||||
|
#if HAS_GRAPHICAL_LCD |
||||
|
#ifndef ST7920_DELAY_1 |
||||
|
#define ST7920_DELAY_1 DELAY_NS(96) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_2 |
||||
|
#define ST7920_DELAY_2 DELAY_NS(48) |
||||
|
#endif |
||||
|
#ifndef ST7920_DELAY_3 |
||||
|
#define ST7920_DELAY_3 DELAY_NS(600) |
||||
|
#endif |
||||
|
#endif |
||||
|
|
||||
|
#endif // HAS_SPI_LCD
|
||||
@ -0,0 +1,65 @@ |
|||||
|
{ |
||||
|
"build": { |
||||
|
"core": "stm32", |
||||
|
"cpu": "cortex-m4", |
||||
|
"extra_flags": "-DSTM32F407xx", |
||||
|
"f_cpu": "168000000L", |
||||
|
"hwids": [ |
||||
|
[ |
||||
|
"0x1EAF", |
||||
|
"0x0003" |
||||
|
], |
||||
|
[ |
||||
|
"0x0483", |
||||
|
"0x3748" |
||||
|
] |
||||
|
], |
||||
|
"ldscript": "stm32f407xg.ld", |
||||
|
"mcu": "stm32f407vet6", |
||||
|
"variant": "BIGTREE_GENERIC_STM32F407_5X" |
||||
|
}, |
||||
|
"debug": { |
||||
|
"jlink_device": "STM32F407VE", |
||||
|
"openocd_target": "stm32f4x", |
||||
|
"svd_path": "STM32F40x.svd", |
||||
|
"tools": { |
||||
|
"stlink": { |
||||
|
"server": { |
||||
|
"arguments": [ |
||||
|
"-f", |
||||
|
"scripts/interface/stlink.cfg", |
||||
|
"-c", |
||||
|
"transport select hla_swd", |
||||
|
"-f", |
||||
|
"scripts/target/stm32f4x.cfg", |
||||
|
"-c", |
||||
|
"reset_config none" |
||||
|
], |
||||
|
"executable": "bin/openocd", |
||||
|
"package": "tool-openocd" |
||||
|
} |
||||
|
} |
||||
|
} |
||||
|
}, |
||||
|
"frameworks": [ |
||||
|
"arduino", |
||||
|
"stm32cube" |
||||
|
], |
||||
|
"name": "STM32F407VE (64k RAM. 512k Flash)", |
||||
|
"upload": { |
||||
|
"disable_flushing": false, |
||||
|
"maximum_ram_size": 65536, |
||||
|
"maximum_size": 524288, |
||||
|
"protocol": "stlink", |
||||
|
"protocols": [ |
||||
|
"stlink", |
||||
|
"dfu", |
||||
|
"jlink" |
||||
|
], |
||||
|
"require_upload_port": true, |
||||
|
"use_1200bps_touch": false, |
||||
|
"wait_for_upload_port": false |
||||
|
}, |
||||
|
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", |
||||
|
"vendor": "Generic" |
||||
|
} |
||||
Loading…
Reference in new issue