Browse Source

Optional `M42`/`M226`; Add more features filters (#19664)

vanilla_fb_2.0.x
Scott Lahteine 4 years ago
committed by GitHub
parent
commit
0988af453c
No known key found for this signature in database GPG Key ID: 4AEE18F83AFDEB23
  1. 5
      Marlin/Configuration_adv.h
  2. 6
      Marlin/src/gcode/control/M226.cpp
  3. 7
      Marlin/src/gcode/control/M42.cpp
  4. 9
      Marlin/src/gcode/gcode.cpp
  5. 9
      Marlin/src/gcode/gcode.h
  6. 32
      Marlin/src/inc/MarlinConfig.h
  7. 14
      Marlin/src/inc/MarlinConfigPre.h
  8. 2
      Marlin/src/pins/pins.h
  9. 47
      buildroot/share/PlatformIO/scripts/common-dependencies.h
  10. 8
      buildroot/share/PlatformIO/scripts/common-dependencies.py
  11. 50
      platformio.ini

5
Marlin/Configuration_adv.h

@ -3559,6 +3559,11 @@
//
//#define M100_FREE_MEMORY_WATCHER
//
// M42 - Set pin states
//
//#define DIRECT_PIN_CONTROL
//
// M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
//

6
Marlin/src/gcode/control/M226.cpp

@ -20,6 +20,10 @@
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(DIRECT_PIN_CONTROL)
#include "../gcode.h"
#include "../../MarlinCore.h" // for pin_is_protected and idle()
#include "../../module/stepper.h"
@ -50,3 +54,5 @@ void GcodeSuite::M226() {
} // pin_state -1 0 1 && pin > -1
} // parser.seen('P')
}
#endif // DIRECT_PIN_CONTROL

7
Marlin/src/gcode/control/M42.cpp

@ -20,9 +20,12 @@
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(DIRECT_PIN_CONTROL)
#include "../gcode.h"
#include "../../MarlinCore.h" // for pin_is_protected
#include "../../inc/MarlinConfig.h"
#if HAS_FAN
#include "../../module/temperature.h"
@ -96,3 +99,5 @@ void GcodeSuite::M42() {
extDigitalWrite(pin, pin_status);
analogWrite(pin, pin_status);
}
#endif // DIRECT_PIN_CONTROL

9
Marlin/src/gcode/gcode.cpp

@ -445,7 +445,10 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
#endif // SDSUPPORT
case 31: M31(); break; // M31: Report time since the start of SD print or last M109
case 42: M42(); break; // M42: Change pin state
#if ENABLED(DIRECT_PIN_CONTROL)
case 42: M42(); break; // M42: Change pin state
#endif
#if ENABLED(PINS_DEBUGGING)
case 43: M43(); break; // M43: Read pin state
@ -620,7 +623,9 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
case 221: M221(); break; // M221: Set Flow Percentage
#endif
case 226: M226(); break; // M226: Wait until a pin reaches a state
#if ENABLED(DIRECT_PIN_CONTROL)
case 226: M226(); break; // M226: Wait until a pin reaches a state
#endif
#if HAS_SERVOS
case 280: M280(); break; // M280: Set servo position absolute

9
Marlin/src/gcode/gcode.h

@ -109,7 +109,7 @@
* The '#' is necessary when calling from within sd files, as it stops buffer prereading
* M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT)
* M34 - Set SD Card sorting options. (Requires SDCARD_SORT_ALPHA)
* M42 - Change pin status via gcode: M42 P<pin> S<value>. LED pin assumed if P is omitted.
* M42 - Change pin status via gcode: M42 P<pin> S<value>. LED pin assumed if P is omitted. (Requires DIRECT_PIN_CONTROL)
* M43 - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
* M48 - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs> S<chizoid>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
* M73 - Set the progress percentage. (Requires LCD_SET_PROGRESS_MANUALLY)
@ -183,7 +183,7 @@
* M220 - Set Feedrate Percentage: "M220 S<percent>" (i.e., "FR" on the LCD)
* Use "M220 B" to back up the Feedrate Percentage and "M220 R" to restore it. (Requires PRUSA_MMU2)
* M221 - Set Flow Percentage: "M221 S<percent>"
* M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>"
* M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>" (Requires DIRECT_PIN_CONTROL)
* M240 - Trigger a camera to take a photograph. (Requires PHOTO_GCODE)
* M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support)
* M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS)
@ -544,8 +544,7 @@ private:
#endif
#endif
static void M42();
TERN_(DIRECT_PIN_CONTROL, static void M42());
TERN_(PINS_DEBUGGING, static void M43());
TERN_(Z_MIN_PROBE_REPEATABILITY_TEST, static void M48());
@ -673,7 +672,7 @@ private:
static void M221();
#endif
static void M226();
TERN_(DIRECT_PIN_CONTROL, static void M226());
TERN_(PHOTO_GCODE, static void M240());

32
Marlin/src/inc/MarlinConfig.h

@ -27,21 +27,31 @@
#include "MarlinConfigPre.h"
#include "../HAL/HAL.h"
#ifndef __MARLIN_DEPS__
#include "../HAL/HAL.h"
#endif
#include "../pins/pins.h"
#include HAL_PATH(../HAL, timers.h)
#include HAL_PATH(../HAL, spi_pins.h)
#ifndef __MARLIN_DEPS__
#include HAL_PATH(../HAL, timers.h)
#include HAL_PATH(../HAL, spi_pins.h)
#endif
#include "Conditionals_post.h"
#include HAL_PATH(../HAL, inc/Conditionals_post.h)
#include "../core/types.h" // Ahead of sanity-checks
#ifndef __MARLIN_DEPS__
#include HAL_PATH(../HAL, inc/Conditionals_post.h)
#include "../core/types.h" // Ahead of sanity-checks
#include "SanityCheck.h"
#include HAL_PATH(../HAL, inc/SanityCheck.h)
#include "SanityCheck.h"
#include HAL_PATH(../HAL, inc/SanityCheck.h)
// Include all core headers
#include "../core/language.h"
#include "../core/utility.h"
#include "../core/serial.h"
// Include all core headers
#include "../core/language.h"
#include "../core/utility.h"
#include "../core/serial.h"
#endif

14
Marlin/src/inc/MarlinConfigPre.h

@ -30,7 +30,9 @@
//
#include <stdint.h>
#include "../HAL/platforms.h"
#ifndef __MARLIN_DEPS__
#include "../HAL/platforms.h"
#endif
#include "../core/boards.h"
#include "../core/macros.h"
@ -45,10 +47,16 @@
#include "Version.h"
#include "Conditionals_LCD.h"
#include HAL_PATH(../HAL, inc/Conditionals_LCD.h)
#ifndef __MARLIN_DEPS__
#include HAL_PATH(../HAL, inc/Conditionals_LCD.h)
#endif
#include "../core/drivers.h"
#include "../../Configuration_adv.h"
#include "Conditionals_adv.h"
#include HAL_PATH(../HAL, inc/Conditionals_adv.h)
#ifndef __MARLIN_DEPS__
#include HAL_PATH(../HAL, inc/Conditionals_adv.h)
#endif

2
Marlin/src/pins/pins.h

@ -52,7 +52,7 @@
#define HAS_FREE_AUX2_PINS !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD))
// Test the target within the included pins file
#ifdef __MARLIN_PREBUILD__
#ifdef __MARLIN_DEPS__
#define NOT_TARGET(V...) 0
#else
#define NOT_TARGET(V...) NONE(V)

47
buildroot/share/PlatformIO/scripts/common-dependencies.h

@ -19,7 +19,6 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* The purpose of this file is just include Marlin Configuration files,
@ -27,44 +26,9 @@
* Used by common-dependencies.py
*/
#include <stdint.h>
#define NUM_SERIAL 1 // Normally provided by HAL/HAL.h
// Include platform headers
//#include "../../../../Marlin/src/HAL/platforms.h"
#include "../../../../Marlin/src/core/boards.h"
#include "../../../../Marlin/src/core/macros.h"
#include "../../../../Marlin/Configuration.h"
#include "../../../../Marlin/Version.h"
#include "../../../../Marlin/src/inc/Conditionals_LCD.h"
#ifdef HAL_PATH
#include HAL_PATH(../../../../Marlin/src/HAL, inc/Conditionals_LCD.h)
#endif
#include "../../../../Marlin/src/core/drivers.h"
#include "../../../../Marlin/Configuration_adv.h"
#include "../../../../Marlin/src/inc/Conditionals_adv.h"
#ifdef HAL_PATH
#include HAL_PATH(../../../../Marlin/src/HAL, inc/Conditionals_adv.h)
#endif
//#include "../../../../Marlin/src/pins/pins.h"
#ifdef HAL_PATH
#include HAL_PATH(../../../../Marlin/src/HAL, timers.h)
#include HAL_PATH(../../../../Marlin/src/HAL, spi_pins.h)
#endif
#include "../../../../Marlin/src/inc/Conditionals_post.h"
#ifdef HAL_PATH
#include HAL_PATH(../../../../Marlin/src/HAL, inc/Conditionals_post.h)
#endif
#include "../../../../Marlin/src/inc/MarlinConfig.h"
//
// Conditionals only used for [features]
@ -89,6 +53,10 @@
#define HAS_EXTRUDERS
#endif
#if ENABLED(DUET_SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
#define HAS_SMART_EFF_MOD
#endif
#if HAS_LCD_MENU
#if ENABLED(BACKLASH_GCODE)
#define HAS_MENU_BACKLASH
@ -145,6 +113,3 @@
#define HAS_MENU_UBL
#endif
#endif
// Include pins for the current board. Platform tests will be skipped. No HAL-defined pins.
#include "../../../../Marlin/src/pins/pins.h"

8
buildroot/share/PlatformIO/scripts/common-dependencies.py

@ -39,6 +39,12 @@ def parse_pkg_uri(spec):
FEATURE_CONFIG = {}
def add_to_feat_cnf(feature, flines):
try:
feat = FEATURE_CONFIG[feature]
except:
FEATURE_CONFIG[feature] = {}
feat = FEATURE_CONFIG[feature]
atoms = re.sub(',\\s*', '\n', flines).strip().split('\n')
for dep in atoms:
@ -238,7 +244,7 @@ def load_marlin_features():
else:
cmd += ['-D' + s]
cmd += ['-D__MARLIN_PREBUILD__ -w -dM -E -x c++ buildroot/share/PlatformIO/scripts/common-dependencies.h']
cmd += ['-D__MARLIN_DEPS__ -w -dM -E -x c++ buildroot/share/PlatformIO/scripts/common-dependencies.h']
cmd = ' '.join(cmd)
blab(cmd)
define_list = subprocess.check_output(cmd, shell=True).splitlines()

50
platformio.ini

@ -27,6 +27,7 @@ include_dir = Marlin
[common]
default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/lcd/HD44780> -<src/lcd/TFTGLCD> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft>
-<src/HAL/STM32/tft> -<src/HAL/STM32F1/tft>
-<src/lcd/menu>
-<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
-<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
@ -53,10 +54,13 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/lcd/extui/example.cpp>
-<src/lcd/extui/malyan_lcd.cpp>
-<src/lcd/extui/lib/ftdi_eve_touch_ui>
-<src/lcd/extui/anycubic_chiron_lcd.cpp>
-<src/lcd/extui/anycubic_chiron_lcd.cpp> -<src/lcd/extui/lib/anycubic_chiron>
-<src/lcd/extui/anycubic_i3mega_lcd.cpp> -<src/lcd/extui/lib/anycubic_i3mega>
-<src/lcd/lcdprint.cpp>
-<src/lcd/touch/touch_buttons.cpp>
-<src/sd/usb_flashdrive>
-<src/HAL/shared/backtrace>
-<src/feature/babystep.cpp>
-<src/feature/backlash.cpp>
-<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
-<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
@ -65,7 +69,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
-<src/feature/bltouch.cpp>
-<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
-<src/feature/caselight> -<src/gcode/feature/caselight>
-<src/feature/caselight.cpp> -<src/gcode/feature/caselight>
-<src/feature/closedloop.cpp>
-<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
-<src/feature/dac> -<src/feature/digipot>
@ -80,6 +84,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/feature/joystick.cpp>
-<src/feature/leds/blinkm.cpp>
-<src/feature/leds/leds.cpp>
-<src/feature/leds/neopixel.cpp>
-<src/feature/leds/pca9533.cpp>
-<src/feature/leds/pca9632.cpp>
-<src/feature/leds/printer_event_leds.cpp>
@ -95,7 +100,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/feature/probe_temp_comp.cpp>
-<src/feature/runout.cpp> -<src/gcode/feature/runout>
-<src/feature/snmm.cpp>
-<src/feature/solenoid.cpp>
-<src/feature/solenoid.cpp> -<src/gcode/control/M380_M381.cpp>
-<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
-<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
-<src/feature/twibus.cpp>
@ -106,7 +111,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/gcode/bedlevel/M420.cpp>
-<src/gcode/calibrate/G33.cpp>
-<src/gcode/calibrate/G34_M422.cpp>
-<src/gcode/calibrate/G76_M871.cpp>
-<src/gcode/calibrate/G76_M192_M871.cpp>
-<src/gcode/calibrate/G425.cpp>
-<src/gcode/calibrate/M12.cpp>
-<src/gcode/calibrate/M48.cpp>
@ -114,14 +119,19 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/gcode/calibrate/M425.cpp>
-<src/gcode/calibrate/M666.cpp>
-<src/gcode/calibrate/M852.cpp>
-<src/gcode/control/M42.cpp> -<src/gcode/control/M226.cpp>
-<src/gcode/config/M43.cpp>
-<src/gcode/config/M217.cpp>
-<src/gcode/config/M218.cpp>
-<src/gcode/config/M221.cpp>
-<src/gcode/config/M281.cpp>
-<src/gcode/config/M301.cpp>
-<src/gcode/config/M302.cpp>
-<src/gcode/config/M304.cpp>
-<src/gcode/config/M305.cpp>
-<src/gcode/config/M540.cpp>
-<src/gcode/config/M575.cpp>
-<src/gcode/config/M672.cpp>
-<src/gcode/control/M7-M9.cpp>
-<src/gcode/control/M211.cpp>
-<src/gcode/control/M605.cpp>
@ -169,8 +179,10 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/gcode/scara>
-<src/gcode/sd>
-<src/gcode/temp/M104_M109.cpp>
-<src/gcode/temp/M155.cpp>
-<src/gcode/units/G20_G21.cpp>
-<src/gcode/units/M149.cpp>
-<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp>
-<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
-<src/libs/hex_print.cpp>
-<src/libs/least_squares_fit.cpp>
@ -214,9 +226,13 @@ HAS_WIRED_LCD = src_filter=+<src/lcd/lcdprint.cpp>
HAS_MARLINUI_HD44780 = src_filter=+<src/lcd/HD44780>
HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1
src_filter=+<src/lcd/dogm>
HAS_(FSMC|SPI)_TFT = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft>
HAS_FSMC_TFT = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
HAS_SPI_TFT = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
HAS_GRAPHICAL_TFT = src_filter=+<src/lcd/tft>
DWIN_CREALITY_LCD = src_filter=+<src/lcd/dwin>
IS_TFTGLCD_PANEL = src_filter=+<src/lcd/TFTGLCD>
HAS_TOUCH_XPT2046 = src_filter=+<src/lcd/touch/touch_buttons.cpp>
HAS_LCD_MENU = src_filter=+<src/lcd/menu>
HAS_GAMES = src_filter=+<src/lcd/menu/game/game.cpp>
MARLIN_BRICKOUT = src_filter=+<src/lcd/menu/game/brickout.cpp>
@ -242,7 +258,7 @@ HAS_MENU_TEMPERATURE = src_filter=+<src/lcd/menu/menu_temperature.cpp>
HAS_MENU_TMC = src_filter=+<src/lcd/menu/menu_tmc.cpp>
HAS_MENU_TOUCH_SCREEN = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
HAS_MENU_UBL = src_filter=+<src/lcd/menu/menu_ubl.cpp>
ANYCUBIC_LCD_CHIRON = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp>
ANYCUBIC_LCD_CHIRON = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp> +<src/lcd/extui/lib/anycubic_chiron>
ANYCUBIC_LCD_I3MEGA = src_filter=+<src/lcd/extui/anycubic_i3mega_lcd.cpp> +<src/lcd/extui/lib/anycubic_i3mega>
HAS_DGUS_LCD = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui/dgus_lcd.cpp>
TOUCH_UI_FTDI_EVE = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
@ -258,13 +274,15 @@ BARICUDA = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/fea
BINARY_FILE_TRANSFER = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
BLTOUCH = src_filter=+<src/feature/bltouch.cpp>
CANCEL_OBJECTS = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight> +<src/gcode/feature/caselight>
CASE_LIGHT_ENABLE = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
USE_CONTROLLER_FAN = src_filter=+<src/feature/controllerfan.cpp>
DAC_STEPPER_CURRENT = src_filter=+<src/feature/dac>
DIRECT_STEPPING = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
EMERGENCY_PARSER = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
I2C_POSITION_ENCODERS = src_filter=+<src/feature/encoder_i2c.cpp>
IIC_BL24CXX_EEPROM = src_filter=+<src/libs/BL24CXX.cpp>
HAS_SPI_FLASH = src_filter=+<src/libs/W25Qxx.cpp>
HAS_FANMUX = src_filter=+<src/feature/fanmux.cpp>
FILAMENT_WIDTH_SENSOR = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
FWRETRACT = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
@ -285,10 +303,10 @@ ADVANCED_PAUSE_FEATURE = src_filter=+<src/feature/pause.cpp> +<src/gcode/featur
AUTO_POWER_CONTROL = src_filter=+<src/feature/power.cpp>
HAS_POWER_MONITOR = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
POWER_LOSS_RECOVERY = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M192_M871.cpp>
HAS_FILAMENT_SENSOR = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
MK2_MULTIPLEXER = src_filter=+<src/feature/snmm.cpp>
EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp>
EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
HAS_CUTTER = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
EXPERIMENTAL_I2CBUS = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
Z_STEPPER_AUTO_ALIGN = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
@ -304,14 +322,19 @@ BACKLASH_GCODE = src_filter=+<src/gcode/calibrate/M425.cpp>
IS_KINEMATIC = src_filter=+<src/gcode/calibrate/M665.cpp>
HAS_EXTRA_ENDSTOPS = src_filter=+<src/gcode/calibrate/M666.cpp>
SKEW_CORRECTION_GCODE = src_filter=+<src/gcode/calibrate/M852.cpp>
PINS_DEBUGGING = src_filter=-<src/gcode/config/M43.cpp>
DIRECT_PIN_CONTROL = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
PINS_DEBUGGING = src_filter=+<src/gcode/config/M43.cpp>
NO_VOLUMETRICS = src_filter=-<src/gcode/config/M200-M205.cpp>
HAS_MULTI_EXTRUDER = src_filter=+<src/gcode/config/M217.cpp>
HAS_HOTEND_OFFSET = src_filter=+<src/gcode/config/M218.cpp>
EDITABLE_SERVO_ANGLES = src_filter=+<src/gcode/config/M281.cpp>
PIDTEMP = src_filter=+<src/gcode/config/M301.cpp>
PREVENT_COLD_EXTRUSION = src_filter=+<src/gcode/config/M302.cpp>
PIDTEMPBED = src_filter=+<src/gcode/config/M304.cpp>
HAS_USER_THERMISTORS = src_filter=+<src/gcode/config/M305.cpp>
SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
BAUD_RATE_GCODE = src_filter=+<src/gcode/config/M575.cpp>
HAS_SMART_EFF_MOD = src_filter=+<src/gcode/config/M672.cpp>
COOLANT_CONTROL = src_filter=+<src/gcode/control/M7-M9.cpp>
HAS_SOFTWARE_ENDSTOPS = src_filter=+<src/gcode/control/M211.cpp>
HAS_DUPLICATION_MODE = src_filter=+<src/gcode/control/M605.cpp>
@ -336,12 +359,13 @@ LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
ARC_SUPPORT = src_filter=+<src/gcode/motion/G2_G3.cpp>
GCODE_MOTION_MODES = src_filter=+<src/gcode/motion/G80.cpp>
BABYSTEPPING = src_filter=+<src/gcode/motion/M290.cpp>
BABYSTEPPING = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
Z_PROBE_SLED = src_filter=+<src/gcode/probe/G31_G32.cpp>
G38_PROBE_TARGET = src_filter=+<src/gcode/probe/G38.cpp>
MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
SDSUPPORT = src_filter=+<src/gcode/sd>
HAS_EXTRUDERS = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
INCH_MODE_SUPPORT = src_filter=+<src/gcode/units/G20_G21.cpp>
TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
NEED_HEX_PRINT = src_filter=+<src/libs/hex_print.cpp>
@ -559,7 +583,7 @@ extends = env:at90usb1286_cdc
[env:DUE]
platform = atmelsam
board = due
src_filter = ${common.default_src_filter} +<src/HAL/DUE>
src_filter = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>
[env:DUE_USB]
platform = atmelsam
@ -635,7 +659,7 @@ lib_ldf_mode = off
lib_compat_mode = strict
extra_scripts = ${common.extra_scripts}
Marlin/src/HAL/LPC1768/upload_extra_script.py
src_filter = ${common.default_src_filter} +<src/HAL/LPC1768>
src_filter = ${common.default_src_filter} +<src/HAL/LPC1768> +<src/HAL/shared/backtrace>
lib_deps = ${common.lib_deps}
Servo
custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
@ -674,7 +698,7 @@ build_flags = ${common.build_flags}
-DUSBCON -DUSBD_USE_CDC
-DTIM_IRQ_PRIO=13
build_unflags = -std=gnu++11
src_filter = ${common.default_src_filter} +<src/HAL/STM32>
src_filter = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>
#
# HAL/STM32F1 Common Environment values

Loading…
Cancel
Save