Browse Source

SKR 1.3 sensorless endstops hack (#16659)

pull/1/head
ellensp 5 years ago
committed by Scott Lahteine
parent
commit
0949c0f326
  1. 29
      Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h

29
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h

@ -25,32 +25,31 @@
/**
* Limit Switches
*
* For Stallguard homing to max swap the min / max pins so
* the MAX physical connectors can be used for other things.
*/
#if X_HOME_DIR == -1 || !X_STALL_SENSITIVITY
#if X_HOME_DIR > 0 && X_STALL_SENSITIVITY && !defined(USE_XMAX_PLUG)
// For StallGuard homing to MAX swap the MIN / MAX pins
// so the MAX physical connectors may be used for other things.
#define X_MIN_PIN P1_28 // X_MAX (free)
#define X_MAX_PIN P1_29 // X_MIN
#else // else, non-endstop is free and appears in M43 output
#define X_MIN_PIN P1_29 // X_MIN
#define X_MAX_PIN P1_28 // X_MAX
#else
#define X_MIN_PIN P1_28 // X_MAX
#define X_MAX_PIN P1_29 // X_MIN
#endif
#if Y_HOME_DIR == -1 || !Y_STALL_SENSITIVITY
#if Y_HOME_DIR > 0 && Y_STALL_SENSITIVITY && !defined(USE_YMAX_PLUG)
#define Y_MIN_PIN P1_26 // Y_MAX (free)
#define Y_MAX_PIN P1_27 // Y_MIN
#else
#define Y_MIN_PIN P1_27 // Y_MIN
#define Y_MAX_PIN P1_26 // Y_MAX
#else
#define Y_MIN_PIN P1_26 // Y_MAX
#define Y_MAX_PIN P1_27 // Y_MIN
#endif
#if Z_HOME_DIR == -1 || !Z_STALL_SENSITIVITY
#if Z_HOME_DIR > 0 && Z_STALL_SENSITIVITY && !defined(USE_ZMAX_PLUG)
#define Z_MIN_PIN P1_24 // Z_MAX (free)
#define Z_MAX_PIN P1_25 // Z_MIN
#else
#define Z_MIN_PIN P1_25 // Z_MIN
#define Z_MAX_PIN P1_24 // Z_MAX
#else
#define Z_MIN_PIN P1_24 // Z_MAX
#define Z_MAX_PIN P1_25 // Z_MIN
#endif
#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups

Loading…
Cancel
Save