Add TMC26XStepper, not ignore

5 years ago · 08434b3605
1 changed files with 27 additions and 21 deletions
--- a/platformio.ini
+++ b/platformio.ini
@ -32,7 +32,6 @@ lib_deps =
  Adafruit NeoPixel@1.1.3
  LiquidTWI2=https://github.com/lincomatic/LiquidTWI2/archive/master.zip
  Arduino-L6470=https://github.com/ameyer/Arduino-L6470/archive/dev.zip
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
  SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
  SailfishRGB_LED=https://github.com/mikeshub/SailfishRGB_LED/archive/master.zip
  SlowSoftI2CMaster=https://github.com/mikeshub/SlowSoftI2CMaster/archive/master.zip
@ -57,6 +56,7 @@ board             = megaatmega2560
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000

@ -70,6 +70,7 @@ board             = megaatmega1280
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000

@ -86,6 +87,7 @@ framework     = arduino
 board         = at90usb1286
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_CDC.py
 monitor_speed = 250000
@ -102,6 +104,7 @@ framework     = arduino
 board         = at90usb1286
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 extra_scripts = pre:buildroot/share/atom/create_custom_upload_command_DFU.py
 monitor_speed = 250000
@ -118,7 +121,6 @@ framework     = arduino
 board         = due
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
-lib_ignore    = TMC26XStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
 monitor_speed = 250000
 [env:DUE_USB]
@ -127,7 +129,6 @@ framework     = arduino
 board         = dueUSB
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
-lib_ignore    = TMC26XStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
 monitor_speed = 250000
 [env:DUE_debug]
@ -139,7 +140,6 @@ build_flags   = ${common.build_flags}
  -funwind-tables
  -mpoke-function-name
 lib_deps      = ${common.lib_deps}
-lib_ignore    = TMC26XStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_DUE>
 monitor_speed = 250000

@ -195,7 +195,7 @@ board         = sanguino_atmega1284p
 build_flags   = ${common.build_flags} -fmerge-all-constants
 upload_speed  = 57600
 lib_deps      = ${common.lib_deps}
-lib_ignore    = TMCStepper, TMC26XStepper
+lib_ignore    = TMCStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000

@ -209,7 +209,7 @@ board         = sanguino_atmega1284p
 build_flags   = ${common.build_flags}
 upload_speed  = 115200
 lib_deps      = ${common.lib_deps}
-lib_ignore    = TMCStepper, TMC26XStepper
+lib_ignore    = TMCStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000

@ -223,6 +223,7 @@ board             = reprap_rambo
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000

@ -235,6 +236,7 @@ framework     = arduino
 board         = sanguino_atmega644p
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000

@ -247,6 +249,7 @@ framework     = arduino
 board         = sanguino_atmega1284p
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed = 250000

@ -262,7 +265,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
  -DDEBUG_LEVEL=0
 build_unflags = -std=gnu++11
 lib_deps      = ${common.lib_deps}
-lib_ignore    = U8glib-HAL, TMC26XStepper, Adafruit NeoPixel
+lib_ignore    = U8glib-HAL, Adafruit NeoPixel
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 monitor_speed = 250000

@ -282,7 +285,7 @@ build_flags       = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags     = -std=gnu++11
 lib_deps          = ${common.lib_deps}
  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
-lib_ignore        = TMC26XStepper, Adafruit NeoPixel
+lib_ignore        = Adafruit NeoPixel
 lib_ldf_mode      = chain
 src_filter        = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 monitor_speed     = 250000
@ -303,7 +306,7 @@ build_flags       = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
  -DDEBUG_LEVEL=0
 build_unflags     = -std=gnu++11
 lib_deps          = ${common.lib_deps}
-lib_ignore        = TMC26XStepper, Adafruit NeoPixel
+lib_ignore        = Adafruit NeoPixel
 src_filter        = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 monitor_speed     = 115200
 upload_protocol   = stlink
@ -318,7 +321,7 @@ framework     = arduino
 board         = disco_f407vg
 build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMCStepper, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel, TMCStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F7>
 monitor_speed = 250000

@ -331,7 +334,7 @@ framework     = arduino
 board         = remram_v1
 build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMCStepper, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel, TMCStepper
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32_F4_F7> -<src/HAL/HAL_STM32_F4_F7/STM32F4>
 monitor_speed = 250000

@ -344,7 +347,7 @@ framework   = arduino
 board       = armed_v1
 build_flags = ${common.build_flags} -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
 lib_deps    = ${common.lib_deps}
-lib_ignore  = Adafruit NeoPixel, TMC26XStepper
+lib_ignore  = Adafruit NeoPixel
 src_filter  = ${common.default_src_filter} +<src/HAL/HAL_STM32>
 monitor_speed = 250000

@ -363,7 +366,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel

 #
 # MKS Robin (STM32F103ZET6)
@ -378,7 +381,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags = -std=gnu++11
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel

 #
 # MKS ROBIN LITE/LITE2 (STM32F103RCT6)
@ -393,7 +396,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags = -std=gnu++11
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel

 #
 # MKS Robin Mini (STM32F103VET6)
@ -408,7 +411,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags = -std=gnu++11
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel

 #
 # MKS Robin Nano (STM32F103VET6)
@ -423,7 +426,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags = -std=gnu++11
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel

 #
 # JGAurora A5S A1 (STM32F103ZET6)
@ -438,7 +441,7 @@ build_flags   = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
 build_unflags = -std=gnu++11
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
 lib_deps      = ${common.lib_deps}
-lib_ignore    = Adafruit NeoPixel, TMC26XStepper
+lib_ignore    = Adafruit NeoPixel
 monitor_speed = 250000

 #
@ -454,7 +457,7 @@ extra_scripts = pre:buildroot/share/PlatformIO/scripts/black_stm32f407vet6.py
 build_flags = ${common.build_flags}
  -DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
 lib_deps = ${common.lib_deps}
-lib_ignore = Adafruit NeoPixel, TMCStepper, TMC26XStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
+lib_ignore = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
 src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
 monitor_speed = 250000

@ -470,7 +473,7 @@ build_flags = ${common.build_flags}
  -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
  -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -DHAVE_HWSERIAL6
 lib_deps = ${common.lib_deps}
-lib_ignore = Adafruit NeoPixel, TMC26XStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
+lib_ignore = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
 src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32>
 monitor_speed = 250000

@ -483,6 +486,7 @@ framework     = arduino
 board         = teensy31
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 lib_ignore    = Adafruit NeoPixel
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_TEENSY31_32>
 monitor_speed = 250000
@ -496,6 +500,7 @@ framework     = arduino
 board         = teensy35
 build_flags   = ${common.build_flags}
 lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 lib_ignore    = Adafruit NeoPixel
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_TEENSY35_36>
 monitor_speed = 250000
@ -539,6 +544,7 @@ board             = fysetc_f6_13
 build_flags       = ${common.build_flags}
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/HAL_AVR>
 monitor_speed     = 250000

@ -566,6 +572,6 @@ framework     = arduino
 build_flags   = ${common.build_flags} -std=gnu++17
 build_unflags = -std=gnu++11
 lib_deps      = ${common.lib_deps}
-lib_ignore    = U8glib-HAL, TMC26XStepper
+lib_ignore    = U8glib-HAL
 src_filter    = ${common.default_src_filter} +<src/HAL/HAL_SAMD51>
 debug_tool    = jlink