Added compile checks for lots of defines in Configuration.h

.travis.yml

@@ -29,10 +29,132 @@ before_script:
   # remove Marlin.pde as it confuses ino after it finds Marlin.ino
   - rm Marlin/Marlin.pde
 script:
+  # build default config
   - ino build -m mega2560
+  # backup configuration.h
+  - cp Marlin/Configuration.h Marlin/Configuration.h.backup
+  - cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
+  # change extruder numbers from 1 to 2
+  - sed -i 's/#define EXTRUDERS 1/#define EXTRUDERS 2/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # change extruder numbers from 2 to 3
+  - sed -i 's/#define EXTRUDERS 2/#define EXTRUDERS 3/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable PIDTEMPBED 
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define PIDTEMPBED/#define PIDTEMPBED/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable THERMAL RUNAWAY PROTECTION for extruders & bed
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_PERIOD/#define THERMAL_RUNAWAY_PROTECTION_PERIOD/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS/#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD/#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS/#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable AUTO_BED_LEVELING
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ENABLE_AUTO_BED_LEVELING/#define ENABLE_AUTO_BED_LEVELING/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable EEPROM_SETTINGS & EEPROM_CHITCHAT
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define EEPROM_SETTINGS/#define EEPROM_SETTINGS/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define EEPROM_CHITCHAT/#define EEPROM_CHITCHAT/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  ### LCDS ###
+  # ULTIMAKERCONTROLLER
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ULTIMAKERCONTROLLER/#define ULTIMAKERCONTROLLER/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # MAKRPANEL
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define MAKRPANEL/#define MAKRPANEL/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # REPRAP_DISCOUNT_SMART_CONTROLLER
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define REPRAP_DISCOUNT_SMART_CONTROLLER/#define REPRAP_DISCOUNT_SMART_CONTROLLER/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # G3D_PANE
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define G3D_PANEL/#define G3D_PANEL/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER/#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # REPRAPWORLD_KEYPAD
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ULTRA_LCD/#define ULTRA_LCD/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define REPRAPWORLD_KEYPAD/#define REPRAPWORLD_KEYPAD/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0/#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # RA_CONTROL_PANEL
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define RA_CONTROL_PANEL/#define RA_CONTROL_PANEL/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  ### I2C PANELS ###
+  # LCD_I2C_SAINSMART_YWROBOT
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define LCD_I2C_SAINSMART_YWROBOT/#define LCD_I2C_SAINSMART_YWROBOT/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # LCD_I2C_PANELOLU2
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define LCD_I2C_PANELOLU2/#define LCD_I2C_PANELOLU2/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # LCD_I2C_VIKI
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define LCD_I2C_VIKI/#define LCD_I2C_VIKI/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # SAV_3DLCD
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define SAV_3DLCD/#define SAV_3DLCD/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # Enable filament sensor
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define FILAMENT_SENSOR/#define FILAMENT_SENSOR/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+   # Enable filament sensor with LCD display
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ULTIMAKERCONTROLLER/#define ULTIMAKERCONTROLLER/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define FILAMENT_SENSOR/#define FILAMENT_SENSOR/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define FILAMENT_LCD_DISPLAY/#define FILAMENT_LCD_DISPLAY/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  ######## Example Configurations ##############
+  # Delta Config
   - cp Marlin/example_configurations/delta/Configuration* Marlin/
   - rm -rf .build/
   - ino build -m mega2560
+  # Makibox Config  need to check board type for Teensy++ 2.0
+  #- cp Marlin/example_configurations/makibox/Configuration* Marlin/
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # SCARA Config
+  - cp Marlin/example_configurations/SCARA/Configuration* Marlin/
+  - rm -rf .build/
+  - ino build -m mega2560
+  # tvrrug Config need to check board type for sanguino atmega644p
+  #- cp Marlin/example_configurations/tvrrug/Round2/Configuration* Marlin/
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  ######## Board Types #############
   - sed -i 's/#define MOTHERBOARD BOARD_RAMPS_13_EFB/#define MOTHERBOARD BOARD_DUEMILANOVE_328P/g' Marlin/Configuration.h
   - rm -rf .build/
   - ino build -m atmega328