mks-viva
3 years ago
committed by
Scott Lahteine
Scott Lahteine
5 changed files with 428 additions and 8 deletions
@ -0,0 +1,372 @@ |
|||
/**
|
|||
* Marlin 3D Printer Firmware |
|||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|||
* |
|||
* Based on Sprinter and grbl. |
|||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm |
|||
* |
|||
* This program is free software: you can redistribute it and/or modify |
|||
* it under the terms of the GNU General Public License as published by |
|||
* the Free Software Foundation, either version 3 of the License, or |
|||
* (at your option) any later version. |
|||
* |
|||
* This program is distributed in the hope that it will be useful, |
|||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
|||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|||
* GNU General Public License for more details. |
|||
* |
|||
* You should have received a copy of the GNU General Public License |
|||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|||
* |
|||
*/ |
|||
#pragma once |
|||
|
|||
#define ALLOW_STM32DUINO |
|||
#include "env_validate.h" |
|||
|
|||
#if HOTENDS > 3 || E_STEPPERS > 5 |
|||
#error "MKS Monster supports up to 3 hotends and 5 E-steppers." |
|||
#elif HAS_FSMC_TFT |
|||
#error "MKS Monster doesn't support FSMC-based TFT displays." |
|||
#endif |
|||
|
|||
#define BOARD_INFO_NAME "MKS Monster8 V1.x" |
|||
|
|||
// USB Flash Drive support
|
|||
#define HAS_OTG_USB_HOST_SUPPORT |
|||
|
|||
//#define DISABLE_DEBUG
|
|||
|
|||
// Avoid conflict with TIMER_TONE
|
|||
#define STEP_TIMER 10 |
|||
|
|||
// Use one of these or SDCard-based Emulation will be used
|
|||
//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation
|
|||
//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation
|
|||
#define I2C_EEPROM // Need use jumpers set i2c for EEPROM
|
|||
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
|
|||
#define I2C_SCL_PIN PB8 // I2C_SCL and CAN_RX
|
|||
#define I2C_SDA_PIN PB9 // I2C_SDA and CAN_TX
|
|||
|
|||
//
|
|||
// Servos
|
|||
//
|
|||
#define SERVO0_PIN PA8 // Enable BLTOUCH
|
|||
|
|||
//
|
|||
// Limit Switches for diag signal
|
|||
//
|
|||
#define X_DIAG_PIN PA14 // Driver0 diag signal is connect to X-
|
|||
#define Y_DIAG_PIN PA15 // Driver1 diag signal is connect to Y-
|
|||
#define Z_DIAG_PIN PB13 // Driver2 diag signal is connect to Z-
|
|||
#define E0_DIAG_PIN PA13 // Driver3 diag signal is connect to X+
|
|||
#define E1_DIAG_PIN PC5 // Driver4 diag signal is connect to Y+
|
|||
#define E2_DIAG_PIN PB12 // Driver5 diag signal is connect to Z+
|
|||
#define E3_DIAG_PIN -1 // Driver6 diag signal is not connect
|
|||
#define E4_DIAG_PIN -1 // Driver7 diag signal is not connect
|
|||
|
|||
// Limit Switches for endstop
|
|||
#define X_MIN_PIN PA14 |
|||
#define X_MAX_PIN PA13 |
|||
#define Y_MIN_PIN PA15 |
|||
#define Y_MAX_PIN PC5 |
|||
#define Z_MIN_PIN PB13 |
|||
#define Z_MAX_PIN PB12 |
|||
|
|||
//
|
|||
// Steppers
|
|||
// Driver 0 1 2 3 4 5 6 7
|
|||
// For X Y Z E0 E1 E2 E3 E4(default pin settings)
|
|||
//
|
|||
//Driver0
|
|||
#define X_ENABLE_PIN PC15 |
|||
#define X_STEP_PIN PC14 |
|||
#define X_DIR_PIN PC13 |
|||
#ifndef X_CS_PIN |
|||
#define X_CS_PIN PE6 |
|||
#endif |
|||
//Driver1
|
|||
#define Y_ENABLE_PIN PC15 |
|||
#define Y_STEP_PIN PE5 |
|||
#define Y_DIR_PIN PE4 |
|||
#ifndef Y_CS_PIN |
|||
#define Y_CS_PIN PE3 |
|||
#endif |
|||
//Driver2
|
|||
#define Z_ENABLE_PIN PE2 |
|||
#define Z_STEP_PIN PE1 |
|||
#define Z_DIR_PIN PE0 |
|||
#ifndef Z_CS_PIN |
|||
#define Z_CS_PIN PB7 |
|||
#endif |
|||
//Driver3
|
|||
#define E0_ENABLE_PIN PB6 |
|||
#define E0_STEP_PIN PB5 |
|||
#define E0_DIR_PIN PB4 |
|||
#ifndef E0_CS_PIN |
|||
#define E0_CS_PIN PB3 |
|||
#endif |
|||
//Driver4
|
|||
#define E1_ENABLE_PIN PD7 |
|||
#define E1_STEP_PIN PD6 |
|||
#define E1_DIR_PIN PD5 |
|||
#ifndef E1_CS_PIN |
|||
#define E1_CS_PIN PD4 |
|||
#endif |
|||
//Driver5
|
|||
#define E2_ENABLE_PIN PD3 |
|||
#define E2_STEP_PIN PD2 |
|||
#define E2_DIR_PIN PD1 |
|||
#ifndef E2_CS_PIN |
|||
#define E2_CS_PIN PD0 |
|||
#endif |
|||
//Driver6
|
|||
#define E3_ENABLE_PIN PC8 |
|||
#define E3_STEP_PIN PC7 |
|||
#define E3_DIR_PIN PC6 |
|||
#ifndef E3_CS_PIN |
|||
#define E3_CS_PIN PD15 |
|||
#endif |
|||
//Driver7
|
|||
#define E4_ENABLE_PIN PD14 |
|||
#define E4_STEP_PIN PD13 |
|||
#define E4_DIR_PIN PD12 |
|||
#ifndef E4_CS_PIN |
|||
#define E4_CS_PIN PD11 |
|||
#endif |
|||
|
|||
//
|
|||
// Software SPI pins for TMC2130 stepper drivers
|
|||
// This board only supports SW SPI for stepper drivers
|
|||
//
|
|||
#if HAS_TMC_SPI |
|||
#define TMC_USE_SW_SPI |
|||
#endif |
|||
#if ENABLED(TMC_USE_SW_SPI) |
|||
#if !defined(TMC_SW_MOSI) || TMC_SW_MOSI == -1 |
|||
#define TMC_SW_MOSI PE14 |
|||
#endif |
|||
#if !defined(TMC_SW_MISO) || TMC_SW_MISO == -1 |
|||
#define TMC_SW_MISO PE13 |
|||
#endif |
|||
#if !defined(TMC_SW_SCK) || TMC_SW_SCK == -1 |
|||
#define TMC_SW_SCK PE12 |
|||
#endif |
|||
#endif |
|||
|
|||
#if HAS_TMC_UART |
|||
//
|
|||
// Software serial
|
|||
// No Hardware serial for steppers
|
|||
//
|
|||
#define X_SERIAL_TX_PIN PE6 |
|||
#define X_SERIAL_RX_PIN PE6 |
|||
|
|||
#define Y_SERIAL_TX_PIN PE3 |
|||
#define Y_SERIAL_RX_PIN PE3 |
|||
|
|||
#define Z_SERIAL_TX_PIN PB7 |
|||
#define Z_SERIAL_RX_PIN PB7 |
|||
|
|||
#define E0_SERIAL_TX_PIN PB3 |
|||
#define E0_SERIAL_RX_PIN PB3 |
|||
|
|||
#define E1_SERIAL_TX_PIN PD4 |
|||
#define E1_SERIAL_RX_PIN PD4 |
|||
|
|||
#define E2_SERIAL_TX_PIN PD0 |
|||
#define E2_SERIAL_RX_PIN PD0 |
|||
|
|||
#define E3_SERIAL_TX_PIN PD15 |
|||
#define E3_SERIAL_RX_PIN PD15 |
|||
|
|||
#define E4_SERIAL_TX_PIN PD11 |
|||
#define E4_SERIAL_RX_PIN PD11 |
|||
|
|||
// Reduce baud rate to improve software serial reliability
|
|||
#define TMC_BAUD_RATE 19200 |
|||
#endif |
|||
|
|||
//
|
|||
// Temperature Sensors
|
|||
//
|
|||
#define TEMP_0_PIN PC1 // TH0
|
|||
#define TEMP_1_PIN PC2 // TH1
|
|||
#define TEMP_2_PIN PC3 // TH2
|
|||
#define TEMP_BED_PIN PC0 // TB
|
|||
|
|||
//
|
|||
// Heaters / Fans
|
|||
//
|
|||
#define HEATER_0_PIN PB1 // HE0
|
|||
#define HEATER_1_PIN PB0 // HE1
|
|||
#define HEATER_2_PIN PA3 // HE2
|
|||
#define HEATER_BED_PIN PB10 // H-BED
|
|||
|
|||
#define FAN_PIN PA2 // FAN0
|
|||
#define FAN1_PIN PA1 // FAN1
|
|||
#define FAN2_PIN PA0 // FAN2
|
|||
|
|||
//
|
|||
// Misc. Functions
|
|||
//
|
|||
#define MT_DET_1 Y_MAX_PIN |
|||
#define MT_DET_2 Z_MAX_PIN |
|||
#define PW_DET Y_MAX_PIN |
|||
#define PW_OFF Z_MAX_PIN |
|||
|
|||
#ifndef FIL_RUNOUT_PIN |
|||
#define FIL_RUNOUT_PIN MT_DET_1 |
|||
#endif |
|||
#ifndef FIL_RUNOUT2_PIN |
|||
#define FIL_RUNOUT2_PIN MT_DET_2 |
|||
#endif |
|||
|
|||
#define POWER_LOSS_PIN PW_DET |
|||
#define PS_ON_PIN PW_OFF |
|||
|
|||
// Random Info
|
|||
#define USB_SERIAL -1 // USB Serial
|
|||
|
|||
#ifndef SDCARD_CONNECTION |
|||
#define SDCARD_CONNECTION ONBOARD |
|||
#endif |
|||
|
|||
//
|
|||
// Onboard SD card
|
|||
//
|
|||
// detect pin dont work when ONBOARD and NO_SD_HOST_DRIVE disabled
|
|||
#if SD_CONNECTION_IS(ONBOARD) |
|||
#define ENABLE_SPI3 |
|||
#define SD_SS_PIN -1 |
|||
#define SDSS PC9 |
|||
#define SD_SCK_PIN PC10 |
|||
#define SD_MISO_PIN PC11 |
|||
#define SD_MOSI_PIN PC12 |
|||
#define SD_DETECT_PIN PC4 |
|||
//
|
|||
// LCD SD
|
|||
//
|
|||
#elif SD_CONNECTION_IS(LCD) |
|||
#define ENABLE_SPI1 |
|||
#define SDSS PA4 |
|||
#define SD_SCK_PIN PA5 |
|||
#define SD_MISO_PIN PA6 |
|||
#define SD_MOSI_PIN PA7 |
|||
#define SD_DETECT_PIN PB11 |
|||
#endif |
|||
|
|||
/**
|
|||
* _____ _____ |
|||
* (BEEPER)PB2 | · · | PE10(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK) |
|||
* (LCD_EN)PE11 | · · | PD10(LCD_RS) (BTN_EN1) PE9 | · · | PA4 (SPI1 CS) |
|||
* (LCD_D4)PD9 | · · PD8(LCD_D5) (BTN_EN2) PE8 | · · PA7 (SPI1 MOSI) |
|||
* (LCD_D6)PE15 | · · | PE7(LCD_D7) (SPI1_RS) PB11 | · · | RESET |
|||
* GND | · · | 5V GND | · · | 3.3V |
|||
* ￣￣￣ ￣￣￣ |
|||
* EXP1 EXP2 |
|||
*/ |
|||
|
|||
#if ANY(TFT_COLOR_UI, TFT_CLASSIC_UI) |
|||
#ifndef TOUCH_CALIBRATION_X |
|||
#define TOUCH_CALIBRATION_X -17253 |
|||
#endif |
|||
#ifndef TOUCH_CALIBRATION_Y |
|||
#define TOUCH_CALIBRATION_Y 11579 |
|||
#endif |
|||
#ifndef TOUCH_OFFSET_X |
|||
#define TOUCH_OFFSET_X 514 |
|||
#endif |
|||
#ifndef TOUCH_OFFSET_Y |
|||
#define TOUCH_OFFSET_Y -24 |
|||
#endif |
|||
#ifndef TOUCH_ORIENTATION |
|||
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE |
|||
#endif |
|||
|
|||
#define TFT_CS_PIN PE15 |
|||
#define TFT_SCK_PIN PA5 |
|||
#define TFT_MISO_PIN PA6 |
|||
#define TFT_MOSI_PIN PA7 |
|||
#define TFT_DC_PIN PE7 |
|||
#define TFT_RST_PIN PD10 |
|||
#define TFT_A0_PIN TFT_DC_PIN |
|||
|
|||
#define TFT_RESET_PIN PD10 |
|||
#define TFT_BACKLIGHT_PIN PE11 |
|||
|
|||
#define TOUCH_BUTTONS_HW_SPI |
|||
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1 |
|||
|
|||
#define LCD_BACKLIGHT_PIN PE11 |
|||
#ifndef TFT_WIDTH |
|||
#define TFT_WIDTH 480 |
|||
#endif |
|||
#ifndef TFT_HEIGHT |
|||
#define TFT_HEIGHT 320 |
|||
#endif |
|||
|
|||
#define TOUCH_CS_PIN PD9 // SPI1_NSS
|
|||
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
|||
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
|||
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
|||
|
|||
#define BTN_EN1 PE9 |
|||
#define BTN_EN2 PE8 |
|||
#define BEEPER_PIN PB2 |
|||
#define BTN_ENC PE10 |
|||
|
|||
#define LCD_READ_ID 0xD3 |
|||
#define LCD_USE_DMA_SPI |
|||
|
|||
#define TFT_BUFFER_SIZE 14400 |
|||
|
|||
#elif HAS_WIRED_LCD |
|||
|
|||
#define BEEPER_PIN PB2 |
|||
#define BTN_ENC PE10 |
|||
#define LCD_PINS_ENABLE PE11 |
|||
#define LCD_PINS_RS PD10 |
|||
#define BTN_EN1 PE9 |
|||
#define BTN_EN2 PE8 |
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
|
|||
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|||
#if ENABLED(MKS_MINI_12864) |
|||
//#define LCD_BACKLIGHT_PIN -1
|
|||
//#define LCD_RESET_PIN -1
|
|||
#define DOGLCD_A0 PD11 |
|||
#define DOGLCD_CS PE15 |
|||
//#define DOGLCD_SCK PA5
|
|||
//#define DOGLCD_MOSI PA7
|
|||
|
|||
#elif ENABLED(MKS_MINI_12864_V3) |
|||
#define DOGLCD_CS PE11 |
|||
#define DOGLCD_A0 PD10 |
|||
#define LCD_PINS_DC DOGLCD_A0 |
|||
#define LCD_BACKLIGHT_PIN -1 |
|||
#define LCD_RESET_PIN PD9 |
|||
#define NEOPIXEL_PIN PD8 |
|||
#define DOGLCD_MOSI PA7 |
|||
#define DOGLCD_SCK PA5 |
|||
#if SD_CONNECTION_IS(ONBOARD) |
|||
#define FORCE_SOFT_SPI |
|||
#endif |
|||
//#define LCD_SCREEN_ROT_180
|
|||
|
|||
#else |
|||
|
|||
#define LCD_PINS_D4 PD9 |
|||
#if ENABLED(ULTIPANEL) |
|||
#define LCD_PINS_D5 PD8 |
|||
#define LCD_PINS_D6 PE15 |
|||
#define LCD_PINS_D7 PE7 |
|||
#endif |
|||
|
|||
#define BOARD_ST7920_DELAY_1 DELAY_NS(96) |
|||
#define BOARD_ST7920_DELAY_2 DELAY_NS(48) |
|||
#define BOARD_ST7920_DELAY_3 DELAY_NS(600) |
|||
|
|||
#endif // !MKS_MINI_12864
|
|||
|
|||
#endif // HAS_WIRED_LCD
|
|||
Loading…
Reference in new issue