Browse Source

More translatable LCD strings (#15190)

pull/1/head
Ludy 5 years ago
committed by Scott Lahteine
parent
commit
068c303742
  1. 2
      Marlin/src/feature/tmc_util.cpp
  2. 14
      Marlin/src/gcode/bedlevel/G26.cpp
  3. 4
      Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
  4. 22
      Marlin/src/lcd/language/language_de.h
  5. 45
      Marlin/src/lcd/language/language_en.h
  6. 4
      Marlin/src/lcd/menu/menu_ubl.cpp
  7. 10
      Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp

2
Marlin/src/feature/tmc_util.cpp

@ -1118,7 +1118,7 @@ void test_tmc_connection(const bool test_x, const bool test_y, const bool test_z
#endif
}
if (axis_connection) ui.set_status_P(PSTR("TMC CONNECTION ERROR"));
if (axis_connection) ui.set_status_P(PSTR(MSG_ERROR_TMC));
}
#endif // HAS_TRINAMIC

14
Marlin/src/gcode/bedlevel/G26.cpp

@ -168,7 +168,7 @@ int8_t g26_prime_flag;
*/
bool user_canceled() {
if (!ui.button_pressed()) return false; // Return if the button isn't pressed
ui.set_status_P(PSTR("Mesh Validation Stopped."), 99);
ui.set_status_P(PSTR(MSG_G26_CANCELED), 99);
#if HAS_LCD_MENU
ui.quick_feedback();
#endif
@ -386,7 +386,7 @@ inline bool turn_on_heaters() {
if (g26_bed_temp > 25) {
#if HAS_SPI_LCD
ui.set_status_P(PSTR("G26 Heating Bed."), 99);
ui.set_status_P(PSTR(MSG_G26_HEATING_BED), 99);
ui.quick_feedback();
#if HAS_LCD_MENU
ui.capture();
@ -407,7 +407,7 @@ inline bool turn_on_heaters() {
// Start heating the active nozzle
#if HAS_SPI_LCD
ui.set_status_P(PSTR("G26 Heating Nozzle."), 99);
ui.set_status_P(PSTR(MSG_G26_HEATING_NOZZLE), 99);
ui.quick_feedback();
#endif
thermalManager.setTargetHotend(g26_hotend_temp, active_extruder);
@ -441,7 +441,7 @@ inline bool prime_nozzle() {
if (g26_prime_flag == -1) { // The user wants to control how much filament gets purged
ui.capture();
ui.set_status_P(PSTR("User-Controlled Prime"), 99);
ui.set_status_P(PSTR(MSG_G26_MANUAL_PRIME), 99);
ui.chirp();
set_destination_from_current();
@ -465,7 +465,7 @@ inline bool prime_nozzle() {
ui.wait_for_release();
ui.set_status_P(PSTR("Done Priming"), 99);
ui.set_status_P(PSTR(MSG_G26_PRIME_DONE), 99);
ui.quick_feedback();
ui.release();
}
@ -473,7 +473,7 @@ inline bool prime_nozzle() {
#endif
{
#if HAS_SPI_LCD
ui.set_status_P(PSTR("Fixed Length Prime."), 99);
ui.set_status_P(PSTR(MSG_G26_FIXED_LENGTH), 99);
ui.quick_feedback();
#endif
set_destination_from_current();
@ -852,7 +852,7 @@ void GcodeSuite::G26() {
} while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
LEAVE:
ui.set_status_P(PSTR("Leaving G26"), -1);
ui.set_status_P(PSTR(MSG_G26_LEAVING), -1);
retract_filament(destination);
destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;

4
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp

@ -289,11 +289,11 @@ void DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable
// Don't let the user in the dark why there is no reaction.
if (!ExtUI::isMediaInserted()) {
setstatusmessagePGM(PSTR("No SD Card"));
setstatusmessagePGM(PSTR(MSG_NO_MEDIA));
return;
}
if (card.flag.abort_sd_printing) {
setstatusmessagePGM(PSTR("Aborting..."));
setstatusmessagePGM(PSTR(MSG_MEDIA_ABORTING));
return;
}
}

22
Marlin/src/lcd/language/language_de.h

@ -37,9 +37,14 @@
#define MSG_YES _UxGT("JA")
#define MSG_NO _UxGT("NEIN")
#define MSG_BACK _UxGT("Zurück")
#define MSG_MEDIA_ABORTING _UxGT("Abbruch...")
#define MSG_MEDIA_INSERTED _UxGT("Medium erkannt")
#define MSG_MEDIA_REMOVED _UxGT("Medium entfernt")
#define MSG_MEDIA_RELEASED _UxGT("Medium freigeg.")
#define MSG_MEDIA_RELEASED _UxGT("Medium freigegeben")
#define MSG_MEDIA_WAITING _UxGT("Warten auf Medium")
#define MSG_MEDIA_READ_ERROR _UxGT("Medium Lesefehler")
#define MSG_MEDIA_USB_REMOVED _UxGT("USB Gerät entfernt")
#define MSG_MEDIA_USB_FAILED _UxGT("USB Start fehlge.")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopp") // Max length 8 characters
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Software-Endstopp")
#define MSG_MAIN _UxGT("Hauptmenü")
@ -94,6 +99,7 @@
#define MSG_LEVEL_BED _UxGT("Bett nivellieren")
#define MSG_LEVEL_CORNERS _UxGT("Ecken nivellieren")
#define MSG_NEXT_CORNER _UxGT("Nächste Ecke")
#define MSG_MESH_EDITOR _UxGT("Netz Editor")
#define MSG_EDIT_MESH _UxGT("Netz bearbeiten")
#define MSG_EDITING_STOPPED _UxGT("Netzbearb. angeh.")
#define MSG_PROBING_MESH _UxGT("Messpunkt")
@ -144,6 +150,12 @@
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT(PREHEAT_1_LABEL " Netz validieren")
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT(PREHEAT_2_LABEL " Netz validieren")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
#define MSG_G26_HEATING_NOZZLE _UxGT("G26 Heating Nozzle")
#define MSG_G26_HEATING_BED _UxGT("G26 heizt Bett")
#define MSG_G26_FIXED_LENGTH _UxGT("Feste Länge Prime")
#define MSG_G26_PRIME_DONE _UxGT("Priming fertig")
#define MSG_G26_CANCELED _UxGT("G26 abgebrochen")
#define MSG_G26_LEAVING _UxGT("G26 verlassen")
#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
#define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.")
@ -173,6 +185,7 @@
#define MSG_UBL_NO_STORAGE _UxGT("Kein Speicher")
#define MSG_UBL_SAVE_ERROR _UxGT("Err:UBL speichern")
#define MSG_UBL_RESTORE_ERROR _UxGT("Err:UBL wiederherst.")
#define MSG_UBL_Z_OFFSET _UxGT("Z-Versatz: ")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Versatz angehalten")
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Schrittweises UBL")
@ -296,7 +309,7 @@
#define MSG_STOP_PRINT _UxGT("SD-Druck abbrechen")
#define MSG_OUTAGE_RECOVERY _UxGT("Wiederh. n. Stroma.")
#define MSG_MEDIA_MENU _UxGT("Druck vom Medium")
#define MSG_NO_MEDIA _UxGT("Keine Medium")
#define MSG_NO_MEDIA _UxGT("Kein Medium")
#define MSG_DWELL _UxGT("Warten...")
#define MSG_USERWAIT _UxGT("Klick zum Fortsetzen")
#define MSG_PRINT_PAUSED _UxGT("Druck pausiert...")
@ -377,8 +390,8 @@
#define MSG_SHORT_DAY _UxGT("t") // One character only
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#define MSG_HEATING _UxGT("Extr. heizt...")
#define MSG_COOLING _UxGT("Extr. kühlt...")
#define MSG_HEATING _UxGT("heizt...")
#define MSG_COOLING _UxGT("kühlt...")
#define MSG_BED_HEATING _UxGT("Bett heizt...")
#define MSG_BED_COOLING _UxGT("Bett kühlt...")
#define MSG_CHAMBER_HEATING _UxGT("Gehäuse heizt...")
@ -432,6 +445,7 @@
#define MSG_INFO_PSU _UxGT("Netzteil")
#define MSG_DRIVE_STRENGTH _UxGT("Motorleistung")
#define MSG_DAC_PERCENT _UxGT("Treiber %")
#define MSG_ERROR_TMC _UxGT("TMC Verbindungsfehler")
#define MSG_DAC_EEPROM_WRITE _UxGT("Werte speichern")
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("DRUCK PAUSIERT")
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("FILAMENT LADEN")

45
Marlin/src/lcd/language/language_en.h

@ -61,6 +61,9 @@
#ifndef MSG_BACK
#define MSG_BACK _UxGT("Back")
#endif
#ifndef MSG_MEDIA_ABORTING
#define MSG_MEDIA_ABORTING _UxGT("Aborting...")
#endif
#ifndef MSG_MEDIA_INSERTED
#define MSG_MEDIA_INSERTED _UxGT("Media Inserted")
#endif
@ -70,6 +73,18 @@
#ifndef MSG_MEDIA_RELEASED
#define MSG_MEDIA_RELEASED _UxGT("Media Released")
#endif
#ifndef MSG_MEDIA_WAITING
#define MSG_MEDIA_WAITING _UxGT("Waiting for media")
#endif
#ifndef MSG_MEDIA_READ_ERROR
#define MSG_MEDIA_READ_ERROR _UxGT("Media read error")
#endif
#ifndef MSG_MEDIA_USB_REMOVED
#define MSG_MEDIA_USB_REMOVED _UxGT("USB device removed")
#endif
#ifndef MSG_MEDIA_USB_FAILED
#define MSG_MEDIA_USB_FAILED _UxGT("USB start failed")
#endif
#ifndef MSG_LCD_ENDSTOPS
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#endif
@ -232,6 +247,9 @@
#ifndef MSG_NEXT_CORNER
#define MSG_NEXT_CORNER _UxGT("Next Corner")
#endif
#ifndef MSG_MESH_EDITOR
#define MSG_MESH_EDITOR _UxGT("Mesh Editor")
#endif
#ifndef MSG_EDIT_MESH
#define MSG_EDIT_MESH _UxGT("Edit Mesh")
#endif
@ -382,6 +400,27 @@
#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
#endif
#ifndef MSG_G26_HEATING_BED
#define MSG_G26_HEATING_BED _UxGT("G26 Heating Bed")
#endif
#ifndef MSG_G26_HEATING_NOZZLE
#define MSG_G26_HEATING_NOZZLE _UxGT("G26 Heating Nozzle")
#endif
#ifndef MSG_G26_MANUAL_PRIME
#define MSG_G26_MANUAL_PRIME _UxGT("Manual priming...")
#endif
#ifndef MSG_G26_FIXED_LENGTH
#define MSG_G26_FIXED_LENGTH _UxGT("Fixed Length Prime")
#endif
#ifndef MSG_G26_PRIME_DONE
#define MSG_G26_PRIME_DONE _UxGT("Done Priming")
#endif
#ifndef MSG_G26_CANCELED
#define MSG_G26_CANCELED _UxGT("G26 Canceled")
#endif
#ifndef MSG_G26_LEAVING
#define MSG_G26_LEAVING _UxGT("Leaving G26")
#endif
#ifndef MSG_UBL_CONTINUE_MESH
#define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh")
#endif
@ -469,6 +508,9 @@
#ifndef MSG_UBL_RESTORE_ERROR
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore")
#endif
#ifndef MSG_UBL_Z_OFFSET
#define MSG_UBL_Z_OFFSET _UxGT("Z-Offset: ")
#endif
#ifndef MSG_UBL_Z_OFFSET_STOPPED
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped")
#endif
@ -1217,6 +1259,9 @@
#ifndef MSG_DAC_PERCENT
#define MSG_DAC_PERCENT _UxGT("Driver %")
#endif
#ifndef MSG_ERROR_TMC
#define MSG_ERROR_TMC _UxGT("TMC CONNECTION ERROR")
#endif
#ifndef MSG_DAC_EEPROM_WRITE
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#endif

4
Marlin/src/lcd/menu/menu_ubl.cpp

@ -79,7 +79,7 @@ void _lcd_mesh_edit_NOP() {
float lcd_mesh_edit() {
ui.goto_screen(_lcd_mesh_edit_NOP);
ui.refresh(LCDVIEW_CALL_REDRAW_NEXT);
_lcd_mesh_fine_tune(PSTR("Mesh Editor"));
_lcd_mesh_fine_tune(PSTR(MSG_MESH_EDITOR));
return mesh_edit_value;
}
@ -89,7 +89,7 @@ void lcd_mesh_edit_setup(const float &initial) {
}
void _lcd_z_offset_edit() {
_lcd_mesh_fine_tune(PSTR("Z-Offset: "));
_lcd_mesh_fine_tune(PSTR(MSG_UBL_Z_OFFSET));
}
float lcd_z_offset_edit() {

10
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp

@ -117,7 +117,7 @@ bool Sd2Card::usbStartup() {
if (!UHS_START) {
SERIAL_ECHOLNPGM(" failed.");
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM("USB start failed");
LCD_MESSAGEPGM(MSG_MEDIA_USB_FAILED);
#endif
return false;
}
@ -214,7 +214,7 @@ void Sd2Card::idle() {
SERIAL_ECHOLNPGM("Waiting for media");
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM("Waiting for media");
LCD_MESSAGEPGM(MSG_MEDIA_WAITING);
#endif
GOTO_STATE_AFTER_DELAY(state, 2000);
}
@ -231,7 +231,7 @@ void Sd2Card::idle() {
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
if (state != MEDIA_READY)
LCD_MESSAGEPGM("USB device removed");
LCD_MESSAGEPGM(MSG_MEDIA_USB_REMOVED);
#endif
GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 );
}
@ -242,14 +242,14 @@ void Sd2Card::idle() {
SERIAL_ECHOLNPGM("Media removed");
#endif
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM("Media removed");
LCD_MESSAGEPGM(MSG_MEDIA_REMOVED);
#endif
GOTO_STATE_AFTER_DELAY( WAIT_FOR_DEVICE, 0 );
}
else if (task_state == UHS_STATE(ERROR)) {
#if EITHER(ULTRA_LCD, EXTENSIBLE_UI)
LCD_MESSAGEPGM("Media read error");
LCD_MESSAGEPGM(MSG_MEDIA_READ_ERROR);
#endif
GOTO_STATE_AFTER_DELAY( MEDIA_ERROR, 0 );
}

Loading…
Cancel
Save