andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Bring some configs up to date

pull/1/head
Scott Lahteine 7 years ago
parent
d7fd78cb91
commit
048486390e
5 changed files with 6 additions and 9 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 3
      Marlin/Configuration.h
  2. 3
      Marlin/src/config/default/Configuration.h
  3. 5
      Marlin/src/config/examples/Tronxy/X1/Configuration.h
  4. 2
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
  5. 2
      Marlin/src/config/examples/stm32f103ret6/Configuration.h

3
Marlin/Configuration.h
View File

@ -1642,11 +1642,10 @@
//#define CR10_STOCKDISPLAY //#define CR10_STOCKDISPLAY
// //
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED // http://reprap.org/wiki/MKS_12864OLED
// //
// Tiny, but very sharp OLED display // Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
// //
//#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

3
Marlin/src/config/default/Configuration.h
View File

@ -1642,11 +1642,10 @@
//#define CR10_STOCKDISPLAY //#define CR10_STOCKDISPLAY
// //
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED // http://reprap.org/wiki/MKS_12864OLED
// //
// Tiny, but very sharp OLED display // Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
// //
//#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

5
Marlin/src/config/examples/Tronxy/X1/Configuration.h
View File

@ -94,7 +94,7 @@
// @section machine // @section machine
/** /**
* Select which serial port on the board will be used for communication with the host. * Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins. * This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting. * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
* *
@ -1627,11 +1627,10 @@
//#define CR10_STOCKDISPLAY //#define CR10_STOCKDISPLAY
// //
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED // http://reprap.org/wiki/MKS_12864OLED
// //
// Tiny, but very sharp OLED display // Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
// //
//#define MKS_12864OLED // Uses the SH1106 controller (default) //#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller //#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

2
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
View File

@ -94,7 +94,7 @@
// @section machine // @section machine
/** /**
* Select which serial port on the board will be used for communication with the host. * Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins. * This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting. * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
* *

2
Marlin/src/config/examples/stm32f103ret6/Configuration.h
View File

@ -94,7 +94,7 @@
// @section machine // @section machine
/** /**
* Select which serial port on the board will be used for communication with the host. * Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins. * This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting. * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
* *

Write Preview
Loading…
Cancel
Save