andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

🎨 Handle more pre-defined pins in pins_postprocess (#22771)

vanilla_fb_2.0.x
Scott Lahteine 3 years ago
parent
89898181bd
commit
03d7fbd755
5 changed files with 660 additions and 83 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 4
      Marlin/src/MarlinCore.cpp
  2. 4
      Marlin/src/inc/SanityCheck.h
  3. 457
      Marlin/src/inc/Warnings.cpp
  4. 251
      Marlin/src/pins/pins_postprocess.h
  5. 9
      buildroot/share/PlatformIO/scripts/preflight-checks.py

4
Marlin/src/MarlinCore.cpp
View File

@ -30,10 +30,6 @@
#include "MarlinCore.h"
#if ENABLED(MARLIN_DEV_MODE)
#warning "WARNING! Disable MARLIN_DEV_MODE for the final build!"
#endif
#include "HAL/shared/Delay.h"
#include "HAL/shared/esp_wifi.h"
#include "HAL/shared/cpu_exception/exception_hook.h"

4
Marlin/src/inc/SanityCheck.h
View File

@ -1001,10 +1001,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
static_assert(WITHIN(npp_xyz.z, Z_MIN_POS, Z_MAX_POS), "NOZZLE_PARK_POINT.Z is out of bounds (Z_MIN_POS, Z_MAX_POS).");
#endif
#if !HAS_RESUME_CONTINUE && DISABLED(HOST_PROMPT_SUPPORT) && DISABLED(EXTENSIBLE_UI)
#warning "Your Configuration provides no method to acquire user feedback!"
#endif
/**
* Instant Freeze
*/

457
Marlin/src/inc/Warnings.cpp
View File

@ -0,0 +1,457 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* Warnings.cpp
* Test configuration values and give warnings at compile-time.
*/
#include "MarlinConfig.h"
//
// Warnings! Located here so they will appear just once in the build output.
//
#if ENABLED(MARLIN_DEV_MODE)
#warning "WARNING! Disable MARLIN_DEV_MODE for the final build!"
#endif
#if NONE(HAS_RESUME_CONTINUE, HOST_PROMPT_SUPPORT)
#warning "Your Configuration provides no method to acquire user feedback!"
#endif
#if AUTO_ASSIGNED_X2_STEPPER
#warning "Auto-assigned X2 STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_X2_MS1
#warning "Auto-assigned X2_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_X2_MS2
#warning "Auto-assigned X2_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_X2_MS3
#warning "Auto-assigned X2_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_X2_CS
#warning "Auto-assigned X2_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_X2_DIAG
#if X2_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned X2_DIAG_PIN to X_MIN_PIN."
#elif X2_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned X2_DIAG_PIN to X_MAX_PIN."
#elif X2_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned X2_DIAG_PIN to Y_MIN_PIN."
#elif X2_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned X2_DIAG_PIN to Y_MAX_PIN."
#elif X2_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned X2_DIAG_PIN to Z_MIN_PIN."
#elif X2_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned X2_DIAG_PIN to Z_MAX_PIN."
#elif X2_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned X2_DIAG_PIN to X_DIAG_PIN."
#elif X2_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned X2_DIAG_PIN to Y_DIAG_PIN."
#elif X2_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned X2_DIAG_PIN to Z_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E0_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E1_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E2_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E3_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E4_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E5_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E6_DIAG_PIN."
#elif X2_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned X2_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_Y2_STEPPER
#warning "Auto-assigned Y2 STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_Y2_MS1
#warning "Auto-assigned Y2_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_Y2_MS2
#warning "Auto-assigned Y2_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_Y2_MS3
#warning "Auto-assigned Y2_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_Y2_CS
#warning "Auto-assigned Y2_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_Y2_DIAG
#if Y2_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned Y2_DIAG_PIN to X_MIN_PIN."
#elif Y2_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned Y2_DIAG_PIN to X_MAX_PIN."
#elif Y2_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned Y2_DIAG_PIN to Y_MIN_PIN."
#elif Y2_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned Y2_DIAG_PIN to Y_MAX_PIN."
#elif Y2_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned Y2_DIAG_PIN to Z_MIN_PIN."
#elif Y2_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned Y2_DIAG_PIN to Z_MAX_PIN."
#elif Y2_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned Y2_DIAG_PIN to X_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned Y2_DIAG_PIN to Y_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned Y2_DIAG_PIN to Z_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E0_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E1_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E2_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E3_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E4_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E5_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E6_DIAG_PIN."
#elif Y2_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned Y2_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_Z2_STEPPER
#warning "Auto-assigned Z2 STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_Z2_MS1
#warning "Auto-assigned Z2_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_Z2_MS2
#warning "Auto-assigned Z2_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_Z2_MS3
#warning "Auto-assigned Z2_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_Z2_CS
#warning "Auto-assigned Z2_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_Z2_DIAG
#if Z2_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned Z2_DIAG_PIN to X_MIN_PIN."
#elif Z2_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned Z2_DIAG_PIN to X_MAX_PIN."
#elif Z2_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned Z2_DIAG_PIN to Y_MIN_PIN."
#elif Z2_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned Z2_DIAG_PIN to Y_MAX_PIN."
#elif Z2_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned Z2_DIAG_PIN to Z_MIN_PIN."
#elif Z2_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned Z2_DIAG_PIN to Z_MAX_PIN."
#elif Z2_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned Z2_DIAG_PIN to X_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned Z2_DIAG_PIN to Y_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned Z2_DIAG_PIN to Z_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E0_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E1_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E2_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E3_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E4_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E5_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E6_DIAG_PIN."
#elif Z2_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned Z2_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_Z3_STEPPER
#warning "Auto-assigned Z3 STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_Z3_CS
#warning "Auto-assigned Z3_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_Z3_MS1
#warning "Auto-assigned Z3_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_Z3_MS2
#warning "Auto-assigned Z3_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_Z3_MS3
#warning "Auto-assigned Z3_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_Z3_DIAG
#if Z3_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned Z3_DIAG_PIN to X_MIN_PIN."
#elif Z3_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned Z3_DIAG_PIN to X_MAX_PIN."
#elif Z3_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned Z3_DIAG_PIN to Y_MIN_PIN."
#elif Z3_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned Z3_DIAG_PIN to Y_MAX_PIN."
#elif Z3_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned Z3_DIAG_PIN to Z_MIN_PIN."
#elif Z3_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned Z3_DIAG_PIN to Z_MAX_PIN."
#elif Z3_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned Z3_DIAG_PIN to X_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned Z3_DIAG_PIN to Y_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned Z3_DIAG_PIN to Z_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E0_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E1_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E2_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E3_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E4_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E5_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E6_DIAG_PIN."
#elif Z3_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned Z3_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_Z4_STEPPER
#warning "Auto-assigned Z4 STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_Z4_CS
#warning "Auto-assigned Z4_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_Z4_MS1
#warning "Auto-assigned Z4_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_Z4_MS2
#warning "Auto-assigned Z4_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_Z4_MS3
#warning "Auto-assigned Z4_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_Z4_DIAG
#if Z4_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned Z4_DIAG_PIN to X_MIN_PIN."
#elif Z4_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned Z4_DIAG_PIN to X_MAX_PIN."
#elif Z4_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned Z4_DIAG_PIN to Y_MIN_PIN."
#elif Z4_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned Z4_DIAG_PIN to Y_MAX_PIN."
#elif Z4_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned Z4_DIAG_PIN to Z_MIN_PIN."
#elif Z4_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned Z4_DIAG_PIN to Z_MAX_PIN."
#elif Z4_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned Z4_DIAG_PIN to X_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned Z4_DIAG_PIN to Y_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned Z4_DIAG_PIN to Z_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E0_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E1_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E2_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E3_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E4_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E5_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E6_DIAG_PIN."
#elif Z4_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned Z4_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_I_STEPPER
#warning "Auto-assigned I STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_I_CS
#warning "Auto-assigned I_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_I_MS1
#warning "Auto-assigned I_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_I_MS2
#warning "Auto-assigned I_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_I_MS3
#warning "Auto-assigned I_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_I_DIAG
#if I_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned I_DIAG_PIN to X_MIN_PIN."
#elif I_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned I_DIAG_PIN to X_MAX_PIN."
#elif I_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned I_DIAG_PIN to Y_MIN_PIN."
#elif I_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned I_DIAG_PIN to Y_MAX_PIN."
#elif I_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned I_DIAG_PIN to Z_MIN_PIN."
#elif I_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned I_DIAG_PIN to Z_MAX_PIN."
#elif I_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned I_DIAG_PIN to X_DIAG_PIN."
#elif I_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned I_DIAG_PIN to Y_DIAG_PIN."
#elif I_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned I_DIAG_PIN to Z_DIAG_PIN."
#elif I_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned I_DIAG_PIN to E0_DIAG_PIN."
#elif I_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned I_DIAG_PIN to E1_DIAG_PIN."
#elif I_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned I_DIAG_PIN to E2_DIAG_PIN."
#elif I_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned I_DIAG_PIN to E3_DIAG_PIN."
#elif I_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned I_DIAG_PIN to E4_DIAG_PIN."
#elif I_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned I_DIAG_PIN to E5_DIAG_PIN."
#elif I_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned I_DIAG_PIN to E6_DIAG_PIN."
#elif I_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned I_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_J_STEPPER
#warning "Auto-assigned J STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_J_CS
#warning "Auto-assigned J_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_J_MS1
#warning "Auto-assigned J_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_J_MS2
#warning "Auto-assigned J_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_J_MS3
#warning "Auto-assigned J_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_J_DIAG
#if J_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned J_DIAG_PIN to X_MIN_PIN."
#elif J_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned J_DIAG_PIN to X_MAX_PIN."
#elif J_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned J_DIAG_PIN to Y_MIN_PIN."
#elif J_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned J_DIAG_PIN to Y_MAX_PIN."
#elif J_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned J_DIAG_PIN to Z_MIN_PIN."
#elif J_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned J_DIAG_PIN to Z_MAX_PIN."
#elif J_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned J_DIAG_PIN to X_DIAG_PIN."
#elif J_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned J_DIAG_PIN to Y_DIAG_PIN."
#elif J_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned J_DIAG_PIN to Z_DIAG_PIN."
#elif J_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned J_DIAG_PIN to E0_DIAG_PIN."
#elif J_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned J_DIAG_PIN to E1_DIAG_PIN."
#elif J_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned J_DIAG_PIN to E2_DIAG_PIN."
#elif J_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned J_DIAG_PIN to E3_DIAG_PIN."
#elif J_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned J_DIAG_PIN to E4_DIAG_PIN."
#elif J_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned J_DIAG_PIN to E5_DIAG_PIN."
#elif J_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned J_DIAG_PIN to E6_DIAG_PIN."
#elif J_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned J_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif
#if AUTO_ASSIGNED_K_STEPPER
#warning "Auto-assigned K STEP/DIR/ENABLE_PINs to unused En_STEP/DIR/ENABLE_PINs."
#endif
#if AUTO_ASSIGNED_K_CS
#warning "Auto-assigned K_CS_PIN to an unused En_CS_PIN."
#endif
#if AUTO_ASSIGNED_K_MS1
#warning "Auto-assigned K_MS1_PIN to an unused En_MS1_PIN."
#endif
#if AUTO_ASSIGNED_K_MS2
#warning "Auto-assigned K_MS2_PIN to an unused En_MS2_PIN."
#endif
#if AUTO_ASSIGNED_K_MS3
#warning "Auto-assigned K_MS3_PIN to an unused En_MS3_PIN."
#endif
#if AUTO_ASSIGNED_K_DIAG
#if K_USE_ENDSTOP == _XMIN_
#warning "Auto-assigned K_DIAG_PIN to X_MIN_PIN."
#elif K_USE_ENDSTOP == _XMAX_
#warning "Auto-assigned K_DIAG_PIN to X_MAX_PIN."
#elif K_USE_ENDSTOP == _YMIN_
#warning "Auto-assigned K_DIAG_PIN to Y_MIN_PIN."
#elif K_USE_ENDSTOP == _YMAX_
#warning "Auto-assigned K_DIAG_PIN to Y_MAX_PIN."
#elif K_USE_ENDSTOP == _ZMIN_
#warning "Auto-assigned K_DIAG_PIN to Z_MIN_PIN."
#elif K_USE_ENDSTOP == _ZMAX_
#warning "Auto-assigned K_DIAG_PIN to Z_MAX_PIN."
#elif K_USE_ENDSTOP == _XDIAG_
#warning "Auto-assigned K_DIAG_PIN to X_DIAG_PIN."
#elif K_USE_ENDSTOP == _YDIAG_
#warning "Auto-assigned K_DIAG_PIN to Y_DIAG_PIN."
#elif K_USE_ENDSTOP == _ZDIAG_
#warning "Auto-assigned K_DIAG_PIN to Z_DIAG_PIN."
#elif K_USE_ENDSTOP == _E0DIAG_
#warning "Auto-assigned K_DIAG_PIN to E0_DIAG_PIN."
#elif K_USE_ENDSTOP == _E1DIAG_
#warning "Auto-assigned K_DIAG_PIN to E1_DIAG_PIN."
#elif K_USE_ENDSTOP == _E2DIAG_
#warning "Auto-assigned K_DIAG_PIN to E2_DIAG_PIN."
#elif K_USE_ENDSTOP == _E3DIAG_
#warning "Auto-assigned K_DIAG_PIN to E3_DIAG_PIN."
#elif K_USE_ENDSTOP == _E4DIAG_
#warning "Auto-assigned K_DIAG_PIN to E4_DIAG_PIN."
#elif K_USE_ENDSTOP == _E5DIAG_
#warning "Auto-assigned K_DIAG_PIN to E5_DIAG_PIN."
#elif K_USE_ENDSTOP == _E6DIAG_
#warning "Auto-assigned K_DIAG_PIN to E6_DIAG_PIN."
#elif K_USE_ENDSTOP == _E7DIAG_
#warning "Auto-assigned K_DIAG_PIN to E7_DIAG_PIN."
#endif
#endif

251
Marlin/src/pins/pins_postprocess.h
View File

@ -542,6 +542,7 @@
#define __EPIN(p,q) E##p##_##q##_PIN
#define _EPIN(p,q) __EPIN(p,q)
#define DIAG_REMAPPED(p,q) (PIN_EXISTS(q) && _EPIN(p##_E_INDEX, DIAG) == q##_PIN)
#define _En_DIAG_(p) _E##p##_DIAG_
// The E0/E1 steppers are always used for Dual E
#if ENABLED(E_DUAL_STEPPER_DRIVERS)
@ -554,6 +555,11 @@
#endif
// The X2 axis, if any, should be the next open extruder port
#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS) && !defined(X2_DIAG_PIN) && !defined(X2_STEP_PIN) && !PIN_EXISTS(X2_CS_PIN)
#define Y2_E_INDEX INCREMENT(X2_E_INDEX)
#else
#define Y2_E_INDEX X2_E_INDEX
#endif
#if EITHER(DUAL_X_CARRIAGE, X_DUAL_STEPPER_DRIVERS)
#ifndef X2_STEP_PIN
#define X2_STEP_PIN _EPIN(X2_E_INDEX, STEP)
@ -561,19 +567,33 @@
#define X2_ENABLE_PIN _EPIN(X2_E_INDEX, ENABLE)
#if X2_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(X2_STEP)
#error "No E stepper plug left for X2!"
#else
#define AUTO_ASSIGNED_X2_STEPPER 1
#endif
#endif
#ifndef X2_MS1_PIN
#define X2_MS1_PIN _EPIN(X2_E_INDEX, MS1)
#if PIN_EXISTS(X2_MS1)
#define AUTO_ASSIGNED_X2_MS1 1
#endif
#endif
#ifndef X2_MS2_PIN
#define X2_MS2_PIN _EPIN(X2_E_INDEX, MS2)
#if PIN_EXISTS(X2_MS2)
#define AUTO_ASSIGNED_X2_MS2 1
#endif
#endif
#ifndef X2_MS3_PIN
#define X2_MS3_PIN _EPIN(X2_E_INDEX, MS3)
#if PIN_EXISTS(X2_MS3)
#define AUTO_ASSIGNED_X2_MS3 1
#endif
#endif
#if AXIS_HAS_SPI(X2) && !defined(X2_CS_PIN)
#define X2_CS_PIN _EPIN(X2_E_INDEX, CS)
#if PIN_EXISTS(X2_CS)
#define AUTO_ASSIGNED_X2_CS 1
#endif
#endif
#if AXIS_HAS_UART(X2)
#ifndef X2_SERIAL_TX_PIN
@ -587,7 +607,7 @@
//
// Auto-assign pins for stallGuard sensorless homing
//
#if !defined(X2_USE_ENDSTOP) && defined(X2_STALL_SENSITIVITY) && ENABLED(X_DUAL_ENDSTOPS) && _PEXI(X2_E_INDEX, DIAG)
#if !defined(X2_DIAG_PIN) && !defined(X2_USE_ENDSTOP) && defined(X2_STALL_SENSITIVITY) && ENABLED(X_DUAL_ENDSTOPS) && _PEXI(X2_E_INDEX, DIAG)
#define X2_DIAG_PIN _EPIN(X2_E_INDEX, DIAG)
#if DIAG_REMAPPED(X2, X_MIN) // If already remapped in the pins file...
#define X2_USE_ENDSTOP _XMIN_
@ -601,16 +621,12 @@
#define X2_USE_ENDSTOP _YMAX_
#elif DIAG_REMAPPED(X2, Z_MAX)
#define X2_USE_ENDSTOP _ZMAX_
#else // Otherwise use the driver DIAG_PIN directly
#define _X2_USE_ENDSTOP(P) _E##P##_DIAG_
#define X2_USE_ENDSTOP _X2_USE_ENDSTOP(X2_E_INDEX)
#else // Otherwise pick the next free En_DIAG_PIN directly
#define X2_USE_ENDSTOP _En_DIAG_(X2_E_INDEX)
#endif
#undef X2_DIAG_PIN
#define AUTO_ASSIGNED_X2_DIAG 1
#undef X2_DIAG_PIN // Defined in Conditionals_post.h based on X2_USE_ENDSTOP
#endif
#define Y2_E_INDEX INCREMENT(X2_E_INDEX)
#else
#define Y2_E_INDEX X2_E_INDEX
#endif
#ifndef X2_CS_PIN
@ -627,6 +643,11 @@
#endif
// The Y2 axis, if any, should be the next open extruder port
#if ENABLED(Y_DUAL_STEPPER_DRIVERS) && !defined(Y2_DIAG_PIN) && !defined(Y2_STEP_PIN) && !PIN_EXISTS(Y2_CS_PIN)
#define Z2_E_INDEX INCREMENT(Y2_E_INDEX)
#else
#define Z2_E_INDEX Y2_E_INDEX
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
#ifndef Y2_STEP_PIN
#define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP)
@ -634,19 +655,33 @@
#define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE)
#if Y2_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(Y2_STEP)
#error "No E stepper plug left for Y2!"
#else
#define AUTO_ASSIGNED_Y2_STEPPER 1
#endif
#endif
#ifndef Y2_MS1_PIN
#define Y2_MS1_PIN _EPIN(Y2_E_INDEX, MS1)
#if PIN_EXISTS(Y2_MS1)
#define AUTO_ASSIGNED_Y2_MS1 1
#endif
#endif
#ifndef Y2_MS2_PIN
#define Y2_MS2_PIN _EPIN(Y2_E_INDEX, MS2)
#if PIN_EXISTS(Y2_MS2)
#define AUTO_ASSIGNED_Y2_MS2 1
#endif
#endif
#ifndef Y2_MS3_PIN
#define Y2_MS3_PIN _EPIN(Y2_E_INDEX, MS3)
#if PIN_EXISTS(Y2_MS3)
#define AUTO_ASSIGNED_Y2_MS3 1
#endif
#endif
#if AXIS_HAS_SPI(Y2) && !defined(Y2_CS_PIN)
#define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS)
#if PIN_EXISTS(Y2_CS)
#define AUTO_ASSIGNED_Y2_CS 1
#endif
#endif
#if AXIS_HAS_UART(Y2)
#ifndef Y2_SERIAL_TX_PIN
@ -657,7 +692,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(Y2_USE_ENDSTOP) && defined(Y2_STALL_SENSITIVITY) && ENABLED(Y_DUAL_ENDSTOPS) && _PEXI(Y2_E_INDEX, DIAG)
#if !defined(Y2_DIAG_PIN) && !defined(Y2_USE_ENDSTOP) && defined(Y2_STALL_SENSITIVITY) && ENABLED(Y_DUAL_ENDSTOPS) && _PEXI(Y2_E_INDEX, DIAG)
#define Y2_DIAG_PIN _EPIN(Y2_E_INDEX, DIAG)
#if DIAG_REMAPPED(Y2, X_MIN)
#define Y2_USE_ENDSTOP _XMIN_
@ -672,14 +707,11 @@
#elif DIAG_REMAPPED(Y2, Z_MAX)
#define Y2_USE_ENDSTOP _ZMAX_
#else
#define _Y2_USE_ENDSTOP(P) _E##P##_DIAG_
#define Y2_USE_ENDSTOP _Y2_USE_ENDSTOP(Y2_E_INDEX)
#define Y2_USE_ENDSTOP _En_DIAG_(Y2_E_INDEX)
#endif
#undef Y2_DIAG_PIN
#define AUTO_ASSIGNED_Y2_DIAG 1
#undef Y2_DIAG_PIN // Defined in Conditionals_post.h based on Y2_USE_ENDSTOP
#endif
#define Z2_E_INDEX INCREMENT(Y2_E_INDEX)
#else
#define Z2_E_INDEX Y2_E_INDEX
#endif
#ifndef Y2_CS_PIN
@ -696,6 +728,11 @@
#endif
// The Z2 axis, if any, should be the next open extruder port
#if NUM_Z_STEPPER_DRIVERS >= 2 && !defined(Z2_DIAG_PIN) && !defined(Z2_STEP_PIN) && !PIN_EXISTS(Z2_CS_PIN)
#define Z3_E_INDEX INCREMENT(Z2_E_INDEX)
#else
#define Z3_E_INDEX Z2_E_INDEX
#endif
#if NUM_Z_STEPPER_DRIVERS >= 2
#ifndef Z2_STEP_PIN
#define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP)
@ -703,19 +740,33 @@
#define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE)
#if Z2_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(Z2_STEP)
#error "No E stepper plug left for Z2!"
#else
#define AUTO_ASSIGNED_Z2_STEPPER 1
#endif
#endif
#ifndef Z2_MS1_PIN
#define Z2_MS1_PIN _EPIN(Z2_E_INDEX, MS1)
#if PIN_EXISTS(Z2_MS1)
#define AUTO_ASSIGNED_Z2_MS1 1
#endif
#endif
#ifndef Z2_MS2_PIN
#define Z2_MS2_PIN _EPIN(Z2_E_INDEX, MS2)
#if PIN_EXISTS(Z2_MS2)
#define AUTO_ASSIGNED_Z2_MS2 1
#endif
#endif
#ifndef Z2_MS3_PIN
#define Z2_MS3_PIN _EPIN(Z2_E_INDEX, MS3)
#if PIN_EXISTS(Z2_MS3)
#define AUTO_ASSIGNED_Z2_MS3 1
#endif
#endif
#if AXIS_HAS_SPI(Z2) && !defined(Z2_CS_PIN)
#define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS)
#if PIN_EXISTS(Z2_CS)
#define AUTO_ASSIGNED_Z2_CS 1
#endif
#endif
#if AXIS_HAS_UART(Z2)
#ifndef Z2_SERIAL_TX_PIN
@ -726,7 +777,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(Z2_USE_ENDSTOP) && defined(Z2_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 2 && _PEXI(Z2_E_INDEX, DIAG)
#if !defined(Z2_DIAG_PIN) && !defined(Z2_USE_ENDSTOP) && defined(Z2_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 2 && _PEXI(Z2_E_INDEX, DIAG)
#define Z2_DIAG_PIN _EPIN(Z2_E_INDEX, DIAG)
#if DIAG_REMAPPED(Z2, X_MIN)
#define Z2_USE_ENDSTOP _XMIN_
@ -741,14 +792,11 @@
#elif DIAG_REMAPPED(Z2, Z_MAX)
#define Z2_USE_ENDSTOP _ZMAX_
#else
#define _Z2_USE_ENDSTOP(P) _E##P##_DIAG_
#define Z2_USE_ENDSTOP _Z2_USE_ENDSTOP(Z2_E_INDEX)
#define Z2_USE_ENDSTOP _En_DIAG_(Z2_E_INDEX)
#endif
#undef Z2_DIAG_PIN
#define AUTO_ASSIGNED_Z2_DIAG 1
#undef Z2_DIAG_PIN // Defined in Conditionals_post.h based on Z2_USE_ENDSTOP
#endif
#define Z3_E_INDEX INCREMENT(Z2_E_INDEX)
#else
#define Z3_E_INDEX Z2_E_INDEX
#endif
#ifndef Z2_CS_PIN
@ -764,6 +812,12 @@
#define Z2_MS3_PIN -1
#endif
// The Z3 axis, if any, should be the next open extruder port
#if NUM_Z_STEPPER_DRIVERS >= 3 && !defined(Z3_DIAG_PIN) && !defined(Z3_STEP_PIN) && !PIN_EXISTS(Z3_CS_PIN)
#define Z4_E_INDEX INCREMENT(Z3_E_INDEX)
#else
#define Z4_E_INDEX Z3_E_INDEX
#endif
#if NUM_Z_STEPPER_DRIVERS >= 3
#ifndef Z3_STEP_PIN
#define Z3_STEP_PIN _EPIN(Z3_E_INDEX, STEP)
@ -771,21 +825,33 @@
#define Z3_ENABLE_PIN _EPIN(Z3_E_INDEX, ENABLE)
#if Z3_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(Z3_STEP)
#error "No E stepper plug left for Z3!"
#else
#define AUTO_ASSIGNED_Z3_STEPPER 1
#endif
#endif
#if AXIS_HAS_SPI(Z3)
#ifndef Z3_CS_PIN
#if AXIS_HAS_SPI(Z3) && !defined(Z3_CS_PIN)
#define Z3_CS_PIN _EPIN(Z3_E_INDEX, CS)
#if PIN_EXISTS(Z3_CS)
#define AUTO_ASSIGNED_Z3_CS 1
#endif
#endif
#ifndef Z3_MS1_PIN
#define Z3_MS1_PIN _EPIN(Z3_E_INDEX, MS1)
#if PIN_EXISTS(Z3_MS1)
#define AUTO_ASSIGNED_Z3_MS1 1
#endif
#endif
#ifndef Z3_MS2_PIN
#define Z3_MS2_PIN _EPIN(Z3_E_INDEX, MS2)
#if PIN_EXISTS(Z3_MS2)
#define AUTO_ASSIGNED_Z3_MS2 1
#endif
#endif
#ifndef Z3_MS3_PIN
#define Z3_MS3_PIN _EPIN(Z3_E_INDEX, MS3)
#if PIN_EXISTS(Z3_MS3)
#define AUTO_ASSIGNED_Z3_MS3 1
#endif
#endif
#if AXIS_HAS_UART(Z3)
#ifndef Z3_SERIAL_TX_PIN
@ -796,7 +862,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(Z3_USE_ENDSTOP) && defined(Z3_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3 && _PEXI(Z3_E_INDEX, DIAG)
#if !defined(Z3_DIAG_PIN) && !defined(Z3_USE_ENDSTOP) && defined(Z3_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 3 && _PEXI(Z3_E_INDEX, DIAG)
#define Z3_DIAG_PIN _EPIN(Z3_E_INDEX, DIAG)
#if DIAG_REMAPPED(Z3, X_MIN)
#define Z3_USE_ENDSTOP _XMIN_
@ -811,14 +877,11 @@
#elif DIAG_REMAPPED(Z3, Z_MAX)
#define Z3_USE_ENDSTOP _ZMAX_
#else
#define _Z3_USE_ENDSTOP(P) _E##P##_DIAG_
#define Z3_USE_ENDSTOP _Z3_USE_ENDSTOP(Z3_E_INDEX)
#define Z3_USE_ENDSTOP _En_DIAG_(Z3_E_INDEX)
#endif
#undef Z3_DIAG_PIN
#define AUTO_ASSIGNED_Z3_DIAG 1
#undef Z3_DIAG_PIN // Defined in Conditionals_post.h based on Z3_USE_ENDSTOP
#endif
#define Z4_E_INDEX INCREMENT(Z3_E_INDEX)
#else
#define Z4_E_INDEX Z3_E_INDEX
#endif
#ifndef Z3_CS_PIN
@ -834,6 +897,12 @@
#define Z3_MS3_PIN -1
#endif
// The Z4 axis, if any, should be the next open extruder port
#if NUM_Z_STEPPER_DRIVERS >= 4 && !defined(Z4_DIAG_PIN) && !defined(Z4_STEP_PIN) && !PIN_EXISTS(Z4_CS_PIN)
#define I_E_INDEX INCREMENT(Z4_E_INDEX)
#else
#define I_E_INDEX Z4_E_INDEX
#endif
#if NUM_Z_STEPPER_DRIVERS >= 4
#ifndef Z4_STEP_PIN
#define Z4_STEP_PIN _EPIN(Z4_E_INDEX, STEP)
@ -841,21 +910,33 @@
#define Z4_ENABLE_PIN _EPIN(Z4_E_INDEX, ENABLE)
#if Z4_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(Z4_STEP)
#error "No E stepper plug left for Z4!"
#else
#define AUTO_ASSIGNED_Z4_STEPPER 1
#endif
#endif
#if AXIS_HAS_SPI(Z4)
#ifndef Z4_CS_PIN
#if AXIS_HAS_SPI(Z4) && !defined(Z4_CS_PIN)
#define Z4_CS_PIN _EPIN(Z4_E_INDEX, CS)
#if PIN_EXISTS(Z4_CS)
#define AUTO_ASSIGNED_Z4_CS 1
#endif
#endif
#ifndef Z4_MS1_PIN
#define Z4_MS1_PIN _EPIN(Z4_E_INDEX, MS1)
#if PIN_EXISTS(Z4_MS1)
#define AUTO_ASSIGNED_Z4_MS1 1
#endif
#endif
#ifndef Z4_MS2_PIN
#define Z4_MS2_PIN _EPIN(Z4_E_INDEX, MS2)
#if PIN_EXISTS(Z4_MS2)
#define AUTO_ASSIGNED_Z4_MS2 1
#endif
#endif
#ifndef Z4_MS3_PIN
#define Z4_MS3_PIN _EPIN(Z4_E_INDEX, MS3)
#if PIN_EXISTS(Z4_MS3)
#define AUTO_ASSIGNED_Z4_MS3 1
#endif
#endif
#if AXIS_HAS_UART(Z4)
#ifndef Z4_SERIAL_TX_PIN
@ -866,7 +947,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(Z4_USE_ENDSTOP) && defined(Z4_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4 && _PEXI(Z4_E_INDEX, DIAG)
#if !defined(Z4_DIAG_PIN) && !defined(Z4_USE_ENDSTOP) && defined(Z4_STALL_SENSITIVITY) && ENABLED(Z_MULTI_ENDSTOPS) && NUM_Z_STEPPER_DRIVERS >= 4 && _PEXI(Z4_E_INDEX, DIAG)
#define Z4_DIAG_PIN _EPIN(Z4_E_INDEX, DIAG)
#if DIAG_REMAPPED(Z4, X_MIN)
#define Z4_USE_ENDSTOP _XMIN_
@ -881,14 +962,11 @@
#elif DIAG_REMAPPED(Z4, Z_MAX)
#define Z4_USE_ENDSTOP _ZMAX_
#else
#define _Z4_USE_ENDSTOP(P) _E##P##_DIAG_
#define Z4_USE_ENDSTOP _Z4_USE_ENDSTOP(Z4_E_INDEX)
#define Z4_USE_ENDSTOP _En_DIAG_(Z4_E_INDEX)
#endif
#undef Z4_DIAG_PIN
#define AUTO_ASSIGNED_Z4_DIAG 1
#undef Z4_DIAG_PIN // Defined in Conditionals_post.h based on Z4_USE_ENDSTOP
#endif
#define I_E_INDEX INCREMENT(Z4_E_INDEX)
#else
#define I_E_INDEX Z4_E_INDEX
#endif
#ifndef Z4_CS_PIN
@ -904,6 +982,12 @@
#define Z4_MS3_PIN -1
#endif
// The I axis, if any, should be the next open extruder port
#if LINEAR_AXES >= 4 && !defined(I_DIAG_PIN) && !defined(I_STEP_PIN) && !PIN_EXISTS(I_CS_PIN)
#define J_E_INDEX INCREMENT(I_E_INDEX)
#else
#define J_E_INDEX I_E_INDEX
#endif
#if LINEAR_AXES >= 4
#ifndef I_STEP_PIN
#define I_STEP_PIN _EPIN(I_E_INDEX, STEP)
@ -911,21 +995,33 @@
#define I_ENABLE_PIN _EPIN(I_E_INDEX, ENABLE)
#if I_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(I_STEP)
#error "No E stepper plug left for I!"
#else
#define AUTO_ASSIGNED_I_STEPPER 1
#endif
#endif
#if AXIS_HAS_SPI(I)
#ifndef I_CS_PIN
#if AXIS_HAS_SPI(I) && !defined(I_CS_PIN)
#define I_CS_PIN _EPIN(I_E_INDEX, CS)
#if PIN_EXISTS(I_CS)
#define AUTO_ASSIGNED_I_CS 1
#endif
#endif
#ifndef I_MS1_PIN
#define I_MS1_PIN _EPIN(I_E_INDEX, MS1)
#if PIN_EXISTS(I_MS1)
#define AUTO_ASSIGNED_I_MS1 1
#endif
#endif
#ifndef I_MS2_PIN
#define I_MS2_PIN _EPIN(I_E_INDEX, MS2)
#if PIN_EXISTS(I_MS2)
#define AUTO_ASSIGNED_I_MS2 1
#endif
#endif
#ifndef I_MS3_PIN
#define I_MS3_PIN _EPIN(I_E_INDEX, MS3)
#if PIN_EXISTS(I_MS3)
#define AUTO_ASSIGNED_I_MS3 1
#endif
#endif
#if AXIS_HAS_UART(I)
#ifndef I_SERIAL_TX_PIN
@ -936,7 +1032,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(I_USE_ENDSTOP) && defined(I_STALL_SENSITIVITY) && _PEXI(I_E_INDEX, DIAG)
#if !defined(I_DIAG_PIN) && !defined(I_USE_ENDSTOP) && defined(I_STALL_SENSITIVITY) && _PEXI(I_E_INDEX, DIAG)
#define I_DIAG_PIN _EPIN(I_E_INDEX, DIAG)
#if DIAG_REMAPPED(I, X_MIN)
#define I_USE_ENDSTOP _XMIN_
@ -951,14 +1047,11 @@
#elif DIAG_REMAPPED(I, Z_MAX)
#define I_USE_ENDSTOP _ZMAX_
#else
#define _I_USE_ENDSTOP(P) _E##P##_DIAG_
#define I_USE_ENDSTOP _I_USE_ENDSTOP(I_E_INDEX)
#define I_USE_ENDSTOP _En_DIAG_(I_E_INDEX)
#endif
#undef I_DIAG_PIN
#define AUTO_ASSIGNED_I_DIAG 1
#undef I_DIAG_PIN // Defined in Conditionals_post.h based on I_USE_ENDSTOP
#endif
#define J_E_INDEX INCREMENT(I_E_INDEX)
#else
#define J_E_INDEX I_E_INDEX
#endif
#ifndef I_CS_PIN
@ -974,6 +1067,12 @@
#define I_MS3_PIN -1
#endif
// The J axis, if any, should be the next open extruder port
#if LINEAR_AXES >= 5 && !defined(J_DIAG_PIN) && !defined(J_STEP_PIN) && !PIN_EXISTS(J_CS_PIN)
#define K_E_INDEX INCREMENT(J_E_INDEX)
#else
#define K_E_INDEX J_E_INDEX
#endif
#if LINEAR_AXES >= 5
#ifndef J_STEP_PIN
#define J_STEP_PIN _EPIN(J_E_INDEX, STEP)
@ -981,21 +1080,33 @@
#define J_ENABLE_PIN _EPIN(J_E_INDEX, ENABLE)
#if I_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(J_STEP)
#error "No E stepper plug left for J!"
#else
#define AUTO_ASSIGNED_J_STEPPER 1
#endif
#endif
#if AXIS_HAS_SPI(J)
#ifndef J_CS_PIN
#if AXIS_HAS_SPI(J) && !defined(J_CS_PIN)
#define J_CS_PIN _EPIN(J_E_INDEX, CS)
#if PIN_EXISTS(J_CS)
#define AUTO_ASSIGNED_J_CS 1
#endif
#endif
#ifndef J_MS1_PIN
#define J_MS1_PIN _EPIN(J_E_INDEX, MS1)
#if PIN_EXISTS(J_MS1)
#define AUTO_ASSIGNED_J_MS1 1
#endif
#endif
#ifndef J_MS2_PIN
#define J_MS2_PIN _EPIN(J_E_INDEX, MS2)
#if PIN_EXISTS(J_MS2)
#define AUTO_ASSIGNED_J_MS2 1
#endif
#endif
#ifndef J_MS3_PIN
#define J_MS3_PIN _EPIN(J_E_INDEX, MS3)
#if PIN_EXISTS(J_MS3)
#define AUTO_ASSIGNED_J_MS3 1
#endif
#endif
#if AXIS_HAS_UART(J)
#ifndef J_SERIAL_TX_PIN
@ -1006,7 +1117,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(J_USE_ENDSTOP) && defined(J_STALL_SENSITIVITY) && _PEXI(J_E_INDEX, DIAG)
#if !defined(J_DIAG_PIN) && !defined(J_USE_ENDSTOP) && defined(J_STALL_SENSITIVITY) && _PEXI(J_E_INDEX, DIAG)
#define J_DIAG_PIN _EPIN(J_E_INDEX, DIAG)
#if DIAG_REMAPPED(J, X_MIN)
#define J_USE_ENDSTOP _XMIN_
@ -1021,14 +1132,11 @@
#elif DIAG_REMAPPED(I, Z_MAX)
#define J_USE_ENDSTOP _ZMAX_
#else
#define _J_USE_ENDSTOP(P) _E##P##_DIAG_
#define J_USE_ENDSTOP _J_USE_ENDSTOP(J_E_INDEX)
#define J_USE_ENDSTOP _En_DIAG_(J_E_INDEX)
#endif
#undef J_DIAG_PIN
#define AUTO_ASSIGNED_J_DIAG 1
#undef J_DIAG_PIN // Defined in Conditionals_post.h based on J_USE_ENDSTOP
#endif
#define K_E_INDEX INCREMENT(J_E_INDEX)
#else
#define K_E_INDEX J_E_INDEX
#endif
#ifndef J_CS_PIN
@ -1044,6 +1152,7 @@
#define J_MS3_PIN -1
#endif
// The K axis, if any, should be the next open extruder port
#if LINEAR_AXES >= 6
#ifndef K_STEP_PIN
#define K_STEP_PIN _EPIN(K_E_INDEX, STEP)
@ -1051,21 +1160,33 @@
#define K_ENABLE_PIN _EPIN(K_E_INDEX, ENABLE)
#if K_E_INDEX >= MAX_E_STEPPERS || !PIN_EXISTS(K_STEP)
#error "No E stepper plug left for K!"
#else
#define AUTO_ASSIGNED_K_STEPPER 1
#endif
#endif
#if AXIS_HAS_SPI(K)
#ifndef K_CS_PIN
#if AXIS_HAS_SPI(K) && !defined(K_CS_PIN)
#define K_CS_PIN _EPIN(K_E_INDEX, CS)
#if PIN_EXISTS(K_CS)
#define AUTO_ASSIGNED_K_CS 1
#endif
#endif
#ifndef K_MS1_PIN
#define K_MS1_PIN _EPIN(K_E_INDEX, MS1)
#if PIN_EXISTS(K_MS1)
#define AUTO_ASSIGNED_K_MS1 1
#endif
#endif
#ifndef K_MS2_PIN
#define K_MS2_PIN _EPIN(K_E_INDEX, MS2)
#if PIN_EXISTS(K_MS2)
#define AUTO_ASSIGNED_K_MS2 1
#endif
#endif
#ifndef K_MS3_PIN
#define K_MS3_PIN _EPIN(K_E_INDEX, MS3)
#if PIN_EXISTS(K_MS3)
#define AUTO_ASSIGNED_K_MS3 1
#endif
#endif
#if AXIS_HAS_UART(K)
#ifndef K_SERIAL_TX_PIN
@ -1076,7 +1197,7 @@
#endif
#endif
// Auto-assign pins for stallGuard sensorless homing
#if !defined(K_USE_ENDSTOP) && defined(K_STALL_SENSITIVITY) && _PEXI(K_E_INDEX, DIAG)
#if !defined(K_DIAG_PIN) && !defined(K_USE_ENDSTOP) && defined(K_STALL_SENSITIVITY) && _PEXI(K_E_INDEX, DIAG)
#define K_DIAG_PIN _EPIN(K_E_INDEX, DIAG)
#if DIAG_REMAPPED(K, X_MIN)
#define K_USE_ENDSTOP _XMIN_
@ -1091,10 +1212,10 @@
#elif DIAG_REMAPPED(K, Z_MAX)
#define K_USE_ENDSTOP _ZMAX_
#else
#define _K_USE_ENDSTOP(P) _E##P##_DIAG_
#define K_USE_ENDSTOP _K_USE_ENDSTOP(K_E_INDEX)
#define K_USE_ENDSTOP _En_DIAG_(K_E_INDEX)
#endif
#undef K_DIAG_PIN
#define AUTO_ASSIGNED_K_DIAG 1
#undef K_DIAG_PIN // Defined in Conditionals_post.h based on K_USE_ENDSTOP
#endif
#endif

9
buildroot/share/PlatformIO/scripts/preflight-checks.py
View File

@ -75,11 +75,18 @@ def sanity_check_target():
err = "ERROR: Config files found in directory %s. Please move them into the Marlin subfolder." % p
raise SystemExit(err)
#
# Give warnings on every build
#
warnfile = os.path.join(env['PROJECT_BUILD_DIR'], build_env, "src", "src", "inc", "Warnings.cpp.o")
if os.path.exists(warnfile):
os.remove(warnfile)
#
# Check for old files indicating an entangled Marlin (mixing old and new code)
#
mixedin = []
for p in [ os.path.join(env['PROJECT_DIR'], "Marlin/src/lcd/dogm") ]:
p = os.path.join(env['PROJECT_DIR'], "Marlin", "src", "lcd", "dogm")
for f in [ "ultralcd_DOGM.cpp", "ultralcd_DOGM.h" ]:
if os.path.isfile(os.path.join(p, f)):
mixedin += [ f ]

Write Preview
Loading…
Cancel
Save