andrey
/
Marlin_FB4S
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Fix MAX31865 on SPI (PT100/1000) support (#20074)

vanilla_fb_2.0.x
JoAnn Manges 4 years ago
committed by Scott Lahteine
parent
012745b218
commit
02c3c314fe
7 changed files with 128 additions and 100 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Unified View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 10
      Marlin/Configuration.h
  2. 9
      Marlin/src/inc/Conditionals_post.h
  3. 10
      Marlin/src/inc/SanityCheck.h
  4. 177
      Marlin/src/module/temperature.cpp
  5. 2
      Marlin/src/module/temperature.h
  6. 8
      buildroot/share/PlatformIO/variants/archim/variant.h
  7. 2
      platformio.ini

10
Marlin/Configuration.h
View File

@ -436,11 +436,11 @@
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
#define DUMMY_THERMISTOR_999_VALUE 100 #define DUMMY_THERMISTOR_999_VALUE 100
// Resistor values when using a MAX31865 (sensor -5) // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
// Sensor value is typically 100 (PT100) or 1000 (PT1000) //#define MAX31865_SENSOR_OHMS_0 100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules. //#define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for AdaFruit PT100; 4300 for AdaFruit PT1000
//#define MAX31865_SENSOR_OHMS 100 //#define MAX31865_SENSOR_OHMS_1 100
//#define MAX31865_CALIBRATION_OHMS 430 //#define MAX31865_CALIBRATION_OHMS_1 430
// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
// from the two sensors differ too much the print will be aborted. // from the two sensors differ too much the print will be aborted.

9
Marlin/src/inc/Conditionals_post.h
View File

@ -445,9 +445,9 @@
#define HEATER_0_MAX6675_TMAX 1024 #define HEATER_0_MAX6675_TMAX 1024
#endif #endif
#if TEMP_SENSOR_0 == -5 #if TEMP_SENSOR_0 == -5
#define MAX6675_IS_MAX31865 1 #define MAX6675_0_IS_MAX31865 1
#elif TEMP_SENSOR_0 == -3 #elif TEMP_SENSOR_0 == -3
#define MAX6675_IS_MAX31855 1 #define MAX6675_0_IS_MAX31855 1
#endif #endif
#elif TEMP_SENSOR_0 == -4 #elif TEMP_SENSOR_0 == -4
#define HEATER_0_USES_AD8495 1 #define HEATER_0_USES_AD8495 1
@ -473,6 +473,11 @@
#define HEATER_1_MAX6675_TMIN 0 #define HEATER_1_MAX6675_TMIN 0
#define HEATER_1_MAX6675_TMAX 1024 #define HEATER_1_MAX6675_TMAX 1024
#endif #endif
#if TEMP_SENSOR_1 == -5
#define MAX6675_1_IS_MAX31865 1
#elif TEMP_SENSOR_1 == -3
#define MAX6675_1_IS_MAX31855 1
#endif
#if TEMP_SENSOR_1 != TEMP_SENSOR_0 #if TEMP_SENSOR_1 != TEMP_SENSOR_0
#if TEMP_SENSOR_1 == -5 #if TEMP_SENSOR_1 == -5
#error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match."

10
Marlin/src/inc/SanityCheck.h
View File

@ -405,6 +405,10 @@
#error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins." #error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins."
#elif defined(MAX6675_SS2) #elif defined(MAX6675_SS2)
#error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins." #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
#elif defined(MAX31865_SENSOR_OHMS)
#error "MAX31865_SENSOR_OHMS is now MAX31865_SENSOR_OHMS_0. Please update your configuration."
#elif defined(MAX31865_CALIBRATION_OHMS)
#error "MAX31865_CALIBRATION_OHMS is now MAX31865_CALIBRATION_OHMS_0. Please update your configuration."
#elif defined(SPINDLE_LASER_ENABLE) #elif defined(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h." #error "SPINDLE_LASER_ENABLE is now SPINDLE_FEATURE or LASER_FEATURE. Please update your Configuration_adv.h."
#elif defined(SPINDLE_LASER_ENABLE_PIN) #elif defined(SPINDLE_LASER_ENABLE_PIN)
@ -1814,8 +1818,10 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT." #error "TEMP_SENSOR_1 is required with TEMP_SENSOR_1_AS_REDUNDANT."
#endif #endif
#if MAX6675_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS) && defined(MAX31865_CALIBRATION_OHMS)) #if MAX6675_0_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_0) && defined(MAX31865_CALIBRATION_OHMS_0))
#error "MAX31865_SENSOR_OHMS and MAX31865_CALIBRATION_OHMS must be set in Configuration.h when using a MAX31865 temperature sensor." #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set in Configuration.h if TEMP_SENSOR_0 is MAX31865."
#elif MAX6675_1_IS_MAX31865 && !(defined(MAX31865_SENSOR_OHMS_1) && defined(MAX31865_CALIBRATION_OHMS_1))
#error "MAX31865_SENSOR_OHMS_1 and MAX31865_CALIBRATION_OHMS_1 must be set in Configuration.h if TEMP_SENSOR_1 is MAX31865."
#endif #endif
/** /**

177
Marlin/src/module/temperature.cpp
View File

@ -44,30 +44,44 @@
#include "../lcd/extui/ui_api.h" #include "../lcd/extui/ui_api.h"
#endif #endif
#if MAX6675_IS_MAX31865 #if MAX6675_0_IS_MAX31865 || MAX6675_1_IS_MAX31865
#include <Adafruit_MAX31865.h> #include <Adafruit_MAX31865.h>
#ifndef MAX31865_CS_PIN #if MAX6675_0_IS_MAX31865 && !defined(MAX31865_CS_PIN) && PIN_EXISTS(MAX6675_SS)
#define MAX31865_CS_PIN MAX6675_SS_PIN // HW:49 SW:65 for example #define MAX31865_CS_PIN MAX6675_SS_PIN
#endif
#if MAX6675_1_IS_MAX31865 && !defined(MAX31865_CS2_PIN) && PIN_EXISTS(MAX6675_SS2)
#define MAX31865_CS2_PIN MAX6675_SS2_PIN
#endif #endif
#ifndef MAX31865_MOSI_PIN #ifndef MAX31865_MOSI_PIN
#define MAX31865_MOSI_PIN MOSI_PIN // 63 #define MAX31865_MOSI_PIN MOSI_PIN
#endif #endif
#ifndef MAX31865_MISO_PIN #ifndef MAX31865_MISO_PIN
#define MAX31865_MISO_PIN MAX6675_DO_PIN // 42 #define MAX31865_MISO_PIN MAX6675_DO_PIN
#endif #endif
#ifndef MAX31865_SCK_PIN #ifndef MAX31865_SCK_PIN
#define MAX31865_SCK_PIN MAX6675_SCK_PIN // 40 #define MAX31865_SCK_PIN MAX6675_SCK_PIN
#endif #endif
Adafruit_MAX31865 max31865 = Adafruit_MAX31865(MAX31865_CS_PIN #if MAX6675_0_IS_MAX31865 && PIN_EXISTS(MAX31865_CS)
#define HAS_MAX31865 1
Adafruit_MAX31865 max31865_0 = Adafruit_MAX31865(MAX31865_CS_PIN
#if MAX31865_CS_PIN != MAX6675_SS_PIN #if MAX31865_CS_PIN != MAX6675_SS_PIN
, MAX31865_MOSI_PIN // For software SPI also set MOSI/MISO/SCK , MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK
, MAX31865_MISO_PIN #endif
, MAX31865_SCK_PIN );
#endif
#if MAX6675_1_IS_MAX31865 && PIN_EXISTS(MAX31865_CS2)
#define HAS_MAX31865 1
Adafruit_MAX31865 max31865_1 = Adafruit_MAX31865(MAX31865_CS2_PIN
#if MAX31865_CS2_PIN != MAX6675_SS2_PIN
, MAX31865_MOSI_PIN, MAX31865_MISO_PIN, MAX31865_SCK_PIN // For software SPI also set MOSI/MISO/SCK
#endif #endif
); );
#endif #endif
#endif
#define MAX6675_SEPARATE_SPI (EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PINS_EXIST(MAX6675_SCK, MAX6675_DO)) #if EITHER(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) && PINS_EXIST(MAX6675_SCK, MAX6675_DO)
#define MAX6675_SEPARATE_SPI 1
#endif
#if MAX6675_SEPARATE_SPI #if MAX6675_SEPARATE_SPI
#include "../libs/private_spi.h" #include "../libs/private_spi.h"
@ -1471,13 +1485,7 @@ void Temperature::manage_heater() {
#if HEATER_0_USER_THERMISTOR #if HEATER_0_USER_THERMISTOR
return user_thermistor_to_deg_c(CTI_HOTEND_0, raw); return user_thermistor_to_deg_c(CTI_HOTEND_0, raw);
#elif HEATER_0_USES_MAX6675 #elif HEATER_0_USES_MAX6675
return ( return TERN(MAX6675_0_IS_MAX31865, max31865_0.temperature(MAX31865_SENSOR_OHMS_0, MAX31865_CALIBRATION_OHMS_0), raw * 0.25);
#if MAX6675_IS_MAX31865
max31865.temperature(MAX31865_SENSOR_OHMS, MAX31865_CALIBRATION_OHMS)
#else
raw * 0.25
#endif
);
#elif HEATER_0_USES_AD595 #elif HEATER_0_USES_AD595
return TEMP_AD595(raw); return TEMP_AD595(raw);
#elif HEATER_0_USES_AD8495 #elif HEATER_0_USES_AD8495
@ -1489,7 +1497,7 @@ void Temperature::manage_heater() {
#if HEATER_1_USER_THERMISTOR #if HEATER_1_USER_THERMISTOR
return user_thermistor_to_deg_c(CTI_HOTEND_1, raw); return user_thermistor_to_deg_c(CTI_HOTEND_1, raw);
#elif HEATER_1_USES_MAX6675 #elif HEATER_1_USES_MAX6675
return raw * 0.25; return TERN(MAX6675_1_IS_MAX31865, max31865_1.temperature(MAX31865_SENSOR_OHMS_1, MAX31865_CALIBRATION_OHMS_1), raw * 0.25);
#elif HEATER_1_USES_AD595 #elif HEATER_1_USES_AD595
return TEMP_AD595(raw); return TEMP_AD595(raw);
#elif HEATER_1_USES_AD8495 #elif HEATER_1_USES_AD8495
@ -1691,7 +1699,8 @@ void Temperature::updateTemperaturesFromRawValues() {
*/ */
void Temperature::init() { void Temperature::init() {
TERN_(MAX6675_IS_MAX31865, max31865.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE TERN_(MAX6675_0_IS_MAX31865, max31865_0.begin(MAX31865_2WIRE)); // MAX31865_2WIRE, MAX31865_3WIRE, MAX31865_4WIRE
TERN_(MAX6675_1_IS_MAX31865, max31865_1.begin(MAX31865_2WIRE));
#if EARLY_WATCHDOG #if EARLY_WATCHDOG
// Flag that the thermalManager should be running // Flag that the thermalManager should be running
@ -2200,27 +2209,19 @@ void Temperature::disable_all_heaters() {
#define THERMOCOUPLE_MAX_ERRORS 15 #define THERMOCOUPLE_MAX_ERRORS 15
#endif #endif
int Temperature::read_max6675( int Temperature::read_max6675(TERN_(HAS_MULTI_6675, const uint8_t hindex/*=0*/)) {
#if COUNT_6675 > 1
const uint8_t hindex
#endif
) {
#if COUNT_6675 == 1
constexpr uint8_t hindex = 0;
#else
// Needed to return the correct temp when this is called too soon
static uint16_t max6675_temp_previous[COUNT_6675] = { 0 };
#endif
static uint8_t max6675_errors[COUNT_6675] = { 0 };
#define MAX6675_HEAT_INTERVAL 250UL #define MAX6675_HEAT_INTERVAL 250UL
#if MAX6675_IS_MAX31855 #if MAX6675_0_IS_MAX31855 || MAX6675_1_IS_MAX31855
static uint32_t max6675_temp = 2000; static uint32_t max6675_temp = 2000;
#define MAX6675_ERROR_MASK 7 #define MAX6675_ERROR_MASK 7
#define MAX6675_DISCARD_BITS 18 #define MAX6675_DISCARD_BITS 18
#define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64 #define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64
#elif HAS_MAX31865
static uint16_t max6675_temp = 2000; // From datasheet 16 bits D15-D0
#define MAX6675_ERROR_MASK 1 // D0 Bit not used
#define MAX6675_DISCARD_BITS 1 // Data is in D15-D1
#define MAX6675_SPEED_BITS 3 // (_BV(SPR1)) // clock ÷ 64
#else #else
static uint16_t max6675_temp = 2000; static uint16_t max6675_temp = 2000;
#define MAX6675_ERROR_MASK 4 #define MAX6675_ERROR_MASK 4
@ -2228,22 +2229,44 @@ void Temperature::disable_all_heaters() {
#define MAX6675_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16 #define MAX6675_SPEED_BITS 2 // (_BV(SPR0)) // clock ÷ 16
#endif #endif
// Return last-read value between readings #if HAS_MULTI_6675
static millis_t next_max6675_ms[COUNT_6675] = { 0 }; // Needed to return the correct temp when this is called between readings
millis_t ms = millis(); static uint16_t max6675_temp_previous[COUNT_6675] = { 0 };
if (PENDING(ms, next_max6675_ms[hindex])) #define MAX6675_TEMP(I) max6675_temp_previous[I]
return int( #define MAX6675_SEL(A,B) (hindex ? (B) : (A))
#if COUNT_6675 == 1 #define MAX6675_WRITE(V) do{ switch (hindex) { case 1: WRITE(MAX6675_SS2_PIN, V); break; default: WRITE(MAX6675_SS_PIN, V); } }while(0)
max6675_temp #define MAX6675_SET_OUTPUT() do{ switch (hindex) { case 1: SET_OUTPUT(MAX6675_SS2_PIN); break; default: SET_OUTPUT(MAX6675_SS_PIN); } }while(0)
#else
constexpr uint8_t hindex = 0;
#define MAX6675_TEMP(I) max6675_temp
#if MAX6675_1_IS_MAX31865
#define MAX6675_SEL(A,B) B
#else #else
max6675_temp_previous[hindex] // Need to return the correct previous value #define MAX6675_SEL(A,B) A
#endif #endif
); #if HEATER_0_USES_MAX6675
#define MAX6675_WRITE(V) WRITE(MAX6675_SS_PIN, V)
#define MAX6675_SET_OUTPUT() SET_OUTPUT(MAX6675_SS_PIN)
#else
#define MAX6675_WRITE(V) WRITE(MAX6675_SS2_PIN, V)
#define MAX6675_SET_OUTPUT() SET_OUTPUT(MAX6675_SS2_PIN)
#endif
#endif
static uint8_t max6675_errors[COUNT_6675] = { 0 };
// Return last-read value between readings
static millis_t next_max6675_ms[COUNT_6675] = { 0 };
millis_t ms = millis();
if (PENDING(ms, next_max6675_ms[hindex])) return int(MAX6675_TEMP(hindex));
next_max6675_ms[hindex] = ms + MAX6675_HEAT_INTERVAL; next_max6675_ms[hindex] = ms + MAX6675_HEAT_INTERVAL;
#if MAX6675_IS_MAX31865 #if HAS_MAX31865
max6675_temp = int(max31865.temperature(MAX31865_SENSOR_OHMS, MAX31865_CALIBRATION_OHMS)); Adafruit_MAX31865 &maxref = MAX6675_SEL(max31865_0, max31865_1);
max6675_temp = int(maxref.temperature(
MAX6675_SEL(MAX31865_SENSOR_OHMS_0, MAX31865_SENSOR_OHMS_1),
MAX6675_SEL(MAX31865_CALIBRATION_OHMS_0, MAX31865_CALIBRATION_OHMS_1)
));
#endif #endif
// //
@ -2254,39 +2277,24 @@ void Temperature::disable_all_heaters() {
spiInit(MAX6675_SPEED_BITS); spiInit(MAX6675_SPEED_BITS);
#endif #endif
#if COUNT_6675 > 1 MAX6675_SET_OUTPUT();
#define WRITE_MAX6675(V) do{ switch (hindex) { case 1: WRITE(MAX6675_SS2_PIN, V); break; default: WRITE(MAX6675_SS_PIN, V); } }while(0) MAX6675_WRITE(LOW); // enable TT_MAX6675
#define SET_OUTPUT_MAX6675() do{ switch (hindex) { case 1: SET_OUTPUT(MAX6675_SS2_PIN); break; default: SET_OUTPUT(MAX6675_SS_PIN); } }while(0)
#elif HEATER_1_USES_MAX6675
#define WRITE_MAX6675(V) WRITE(MAX6675_SS2_PIN, V)
#define SET_OUTPUT_MAX6675() SET_OUTPUT(MAX6675_SS2_PIN)
#else
#define WRITE_MAX6675(V) WRITE(MAX6675_SS_PIN, V)
#define SET_OUTPUT_MAX6675() SET_OUTPUT(MAX6675_SS_PIN)
#endif
SET_OUTPUT_MAX6675();
WRITE_MAX6675(LOW); // enable TT_MAX6675
DELAY_NS(100); // Ensure 100ns delay DELAY_NS(100); // Ensure 100ns delay
// Read a big-endian temperature value // Read a big-endian temperature value
max6675_temp = 0; max6675_temp = 0;
for (uint8_t i = sizeof(max6675_temp); i--;) { for (uint8_t i = sizeof(max6675_temp); i--;) {
max6675_temp |= ( max6675_temp |= TERN(MAX6675_SEPARATE_SPI, max6675_spi.receive(), spiRec());
#if MAX6675_SEPARATE_SPI
max6675_spi.receive()
#else
spiRec()
#endif
);
if (i > 0) max6675_temp <<= 8; // shift left if not the last byte if (i > 0) max6675_temp <<= 8; // shift left if not the last byte
} }
WRITE_MAX6675(HIGH); // disable TT_MAX6675 MAX6675_WRITE(HIGH); // disable TT_MAX6675
if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max6675_temp & MAX6675_ERROR_MASK)) { const uint8_t fault_31865 = TERN1(HAS_MAX31865, maxref.readFault());
max6675_errors[hindex] += 1;
if (DISABLED(IGNORE_THERMOCOUPLE_ERRORS) && (max6675_temp & MAX6675_ERROR_MASK) && fault_31865) {
max6675_errors[hindex]++;
if (max6675_errors[hindex] > THERMOCOUPLE_MAX_ERRORS) { if (max6675_errors[hindex] > THERMOCOUPLE_MAX_ERRORS) {
SERIAL_ERROR_START(); SERIAL_ERROR_START();
SERIAL_ECHOPGM("Temp measurement error! "); SERIAL_ECHOPGM("Temp measurement error! ");
@ -2298,18 +2306,29 @@ void Temperature::disable_all_heaters() {
SERIAL_ECHOLNPGM("Short to GND"); SERIAL_ECHOLNPGM("Short to GND");
else if (max6675_temp & 4) else if (max6675_temp & 4)
SERIAL_ECHOLNPGM("Short to VCC"); SERIAL_ECHOLNPGM("Short to VCC");
#elif HAS_MAX31865
if (fault_31865) {
maxref.clearFault();
SERIAL_ECHOPAIR("MAX31865 Fault :(", fault_31865, ") >>");
if (fault_31865 & MAX31865_FAULT_HIGHTHRESH)
SERIAL_ECHOLNPGM("RTD High Threshold");
else if (fault_31865 & MAX31865_FAULT_LOWTHRESH)
SERIAL_ECHOLNPGM("RTD Low Threshold");
else if (fault_31865 & MAX31865_FAULT_REFINLOW)
SERIAL_ECHOLNPGM("REFIN- > 0.85 x Bias");
else if (fault_31865 & MAX31865_FAULT_REFINHIGH)
SERIAL_ECHOLNPGM("REFIN- < 0.85 x Bias - FORCE- open");
else if (fault_31865 & MAX31865_FAULT_RTDINLOW)
SERIAL_ECHOLNPGM("REFIN- < 0.85 x Bias - FORCE- open");
else if (fault_31865 & MAX31865_FAULT_OVUV)
SERIAL_ECHOLNPGM("Under/Over voltage");
}
#else #else
SERIAL_ECHOLNPGM("MAX6675"); SERIAL_ECHOLNPGM("MAX6675");
#endif #endif
// Thermocouple open // Thermocouple open
max6675_temp = 4 * ( max6675_temp = 4 * MAX6675_SEL(HEATER_0_MAX6675_TMAX, HEATER_1_MAX6675_TMAX);
#if COUNT_6675 > 1
hindex ? HEATER_1_MAX6675_TMAX : HEATER_0_MAX6675_TMAX
#else
TERN(HEATER_1_USES_MAX6675, HEATER_1_MAX6675_TMAX, HEATER_0_MAX6675_TMAX)
#endif
);
} }
else else
max6675_temp >>= MAX6675_DISCARD_BITS; max6675_temp >>= MAX6675_DISCARD_BITS;
@ -2319,13 +2338,11 @@ void Temperature::disable_all_heaters() {
max6675_errors[hindex] = 0; max6675_errors[hindex] = 0;
} }
#if ENABLED(MAX6675_IS_MAX31855) #if MAX6675_0_IS_MAX31855 || MAX6675_1_IS_MAX31855
if (max6675_temp & 0x00002000) max6675_temp |= 0xFFFFC000; // Support negative temperature if (max6675_temp & 0x00002000) max6675_temp |= 0xFFFFC000; // Support negative temperature
#endif #endif
#if COUNT_6675 > 1 MAX6675_TEMP(hindex) = max6675_temp;
max6675_temp_previous[hindex] = max6675_temp;
#endif
return int(max6675_temp); return int(max6675_temp);
} }

2
Marlin/src/module/temperature.h
View File

@ -811,7 +811,7 @@ class Temperature {
#if HAS_MAX6675 #if HAS_MAX6675
#define COUNT_6675 1 + BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675) #define COUNT_6675 1 + BOTH(HEATER_0_USES_MAX6675, HEATER_1_USES_MAX6675)
#if COUNT_6675 > 1 #if COUNT_6675 > 1
#define HAS_MULTI_6675 #define HAS_MULTI_6675 1
#define READ_MAX6675(N) read_max6675(N) #define READ_MAX6675(N) read_max6675(N)
#else #else
#define READ_MAX6675(N) read_max6675() #define READ_MAX6675(N) read_max6675()

8
buildroot/share/PlatformIO/variants/archim/variant.h
View File

@ -55,10 +55,10 @@ extern "C"{
*----------------------------------------------------------------------------*/ *----------------------------------------------------------------------------*/
// Number of pins defined in PinDescription array // Number of pins defined in PinDescription array
#define PINS_COUNT (79U) #define PINS_COUNT 79
#define NUM_DIGITAL_PINS (66U) #define NUM_DIGITAL_PINS 66
#define NUM_ANALOG_INPUTS (12U) #define NUM_ANALOG_INPUTS 12
#define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1) #define analogInputToDigitalPin(p) ((p < 12) ? (p) + 54 : -1)
#define digitalPinToPort(P) ( g_APinDescription[P].pPort ) #define digitalPinToPort(P) ( g_APinDescription[P].pPort )
#define digitalPinToBitMask(P) ( g_APinDescription[P].ulPin ) #define digitalPinToBitMask(P) ( g_APinDescription[P].ulPin )

2
platformio.ini
View File

@ -222,7 +222,7 @@ HAS_L64XX = Arduino-L6470@0.8.0
src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470> src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 NEOPIXEL_LED = Adafruit NeoPixel@1.5.0
src_filter=+<src/feature/leds/neopixel.cpp> src_filter=+<src/feature/leds/neopixel.cpp>
MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 MAX6675_._IS_MAX31865 = Adafruit MAX31865 library@~1.1.0
USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0 USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0
USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4 USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4
USES_LIQUIDTWI2 = LiquidTWI2@1.2.7 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7

Write Preview
Loading…
Cancel
Save