Marlin_FB4S/Marlin/src/pins/mega/pins_LEAPFROG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Leapfrog Driver board pin assignments
 */

#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
  #error "Oops! Select 'Mega 1280' or 'Mega 2560' in 'Tools > Board.'"
#endif

#define BOARD_INFO_NAME "Leapfrog"

//
// Limit Switches
//
#define X_MIN_PIN                             47
#define X_MAX_PIN                              2
#define Y_MIN_PIN                             48
#define Y_MAX_PIN                             15
#define Z_MIN_PIN                             49
#define Z_MAX_PIN                             -1

//
// Steppers
//
#define X_STEP_PIN                            28
#define X_DIR_PIN                             63
#define X_ENABLE_PIN                          29

#define Y_STEP_PIN                            14  // A6
#define Y_DIR_PIN                             15  // A0
#define Y_ENABLE_PIN                          39

#define Z_STEP_PIN                            31  // A2
#define Z_DIR_PIN                             32  // A6
#define Z_ENABLE_PIN                          30  // A1

#define E0_STEP_PIN                           34  // 34
#define E0_DIR_PIN                            35  // 35
#define E0_ENABLE_PIN                         33  // 33

#define E1_STEP_PIN                           37  // 37
#define E1_DIR_PIN                            40  // 40
#define E1_ENABLE_PIN                         36  // 36

//
// Temperature Sensors
//
#define TEMP_0_PIN                            13  // Analog Input (D27)
#define TEMP_1_PIN                            15  // Analog Input (1)
#define TEMP_BED_PIN                          14  // Analog Input (1,2 or I2C)

//
// Heaters / Fans
//
#define HEATER_0_PIN                           9
#define HEATER_1_PIN                           8  // 12
#define HEATER_2_PIN                          11  // 13
#define HEATER_BED_PIN                        10  // 14/15

#define FAN_PIN                                7

//
// Misc. Functions
//
#define SDSS                                  11
#define LED_PIN                               13
#define SOL1_PIN                              16
#define SOL2_PIN                              17

/*  Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31)  */