Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

205 lines
4.7 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include "../inc/MarlinConfig.h"
#if ENABLED(EXPERIMENTAL_I2CBUS)
#include "twibus.h"
#include <Wire.h>
TWIBus::TWIBus() {
#if I2C_SLAVE_ADDRESS == 0
Wire.begin(); // No address joins the BUS as the master
#else
Wire.begin(I2C_SLAVE_ADDRESS); // Join the bus as a slave
#endif
this->reset();
}
void TWIBus::reset() {
this->buffer_s = 0;
this->buffer[0] = 0x00;
}
void TWIBus::address(const uint8_t adr) {
if (!WITHIN(adr, 8, 127)) {
SERIAL_ECHO_MSG("Bad I2C address (8-127)");
}
this->addr = adr;
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("address"), adr);
#endif
}
void TWIBus::addbyte(const char c) {
if (this->buffer_s >= COUNT(this->buffer)) return;
this->buffer[this->buffer_s++] = c;
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("addbyte"), c);
#endif
}
void TWIBus::addbytes(char src[], uint8_t bytes) {
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("addbytes"), bytes);
#endif
while (bytes--) this->addbyte(*src++);
}
void TWIBus::addstring(char str[]) {
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("addstring"), str);
#endif
while (char c = *str++) this->addbyte(c);
}
void TWIBus::send() {
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("send"), this->addr);
#endif
Wire.beginTransmission(this->addr);
Wire.write(this->buffer, this->buffer_s);
Wire.endTransmission();
this->reset();
}
// static
void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) {
SERIAL_ECHO_START();
serialprintPGM(prefix);
SERIAL_ECHOPAIR(": from:", adr);
SERIAL_ECHOPAIR(" bytes:", bytes);
SERIAL_ECHOPGM(" data:");
}
// static
void TWIBus::echodata(uint8_t bytes, const char prefix[], uint8_t adr) {
echoprefix(bytes, prefix, adr);
while (bytes-- && Wire.available()) SERIAL_CHAR(Wire.read());
SERIAL_EOL();
}
void TWIBus::echobuffer(const char prefix[], uint8_t adr) {
echoprefix(this->buffer_s, prefix, adr);
for (uint8_t i = 0; i < this->buffer_s; i++) SERIAL_CHAR(this->buffer[i]);
SERIAL_EOL();
}
bool TWIBus::request(const uint8_t bytes) {
if (!this->addr) return false;
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("request"), bytes);
#endif
// requestFrom() is a blocking function
if (Wire.requestFrom(this->addr, bytes) == 0) {
#if ENABLED(DEBUG_TWIBUS)
debug("request fail", this->addr);
#endif
return false;
}
return true;
}
void TWIBus::relay(const uint8_t bytes) {
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("relay"), bytes);
#endif
if (this->request(bytes))
echodata(bytes, PSTR("i2c-reply"), this->addr);
}
uint8_t TWIBus::capture(char *dst, const uint8_t bytes) {
this->reset();
uint8_t count = 0;
while (count < bytes && Wire.available())
dst[count++] = Wire.read();
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("capture"), count);
#endif
return count;
}
// static
void TWIBus::flush() {
while (Wire.available()) Wire.read();
}
#if I2C_SLAVE_ADDRESS > 0
void TWIBus::receive(uint8_t bytes) {
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("receive"), bytes);
#endif
echodata(bytes, PSTR("i2c-receive"), 0);
}
void TWIBus::reply(char str[]/*=NULL*/) {
#if ENABLED(DEBUG_TWIBUS)
debug(PSTR("reply"), str);
#endif
if (str) {
this->reset();
this->addstring(str);
}
Wire.write(this->buffer, this->buffer_s);
this->reset();
}
#endif
#if ENABLED(DEBUG_TWIBUS)
// static
void TWIBus::prefix(const char func[]) {
SERIAL_ECHOPGM("TWIBus::");
serialprintPGM(func);
SERIAL_ECHOPGM(": ");
}
void TWIBus::debug(const char func[], uint32_t adr) {
if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(adr); }
}
void TWIBus::debug(const char func[], char c) {
if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(c); }
}
void TWIBus::debug(const char func[], char str[]) {
if (DEBUGGING(INFO)) { prefix(func); SERIAL_ECHOLN(str); }
}
#endif
#endif // EXPERIMENTAL_I2CBUS