Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

1296 lines
57 KiB

#ifndef LANGUAGE_H
#define LANGUAGE_H
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
//
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// Languages
// 1 English
// 2 Polish
// 3 French (awaiting translation!)
// 4 German
// 5 Spanish
// 6 Russian
// 7 Italian
// 8 Portuguese
#ifndef LANGUAGE_CHOICE
#define LANGUAGE_CHOICE 1 // Pick your language from the list above
#endif
#define PROTOCOL_VERSION "1.0"
#if MOTHERBOARD == 7 || MOTHERBOARD == 71
#define MACHINE_NAME "Ultimaker"
#define FIRMWARE_URL "http://firmware.ultimaker.com"
#else
#define MACHINE_NAME "Mendel"
#define FIRMWARE_URL "http://www.mendel-parts.com"
#endif
#define STRINGIFY_(n) #n
#define STRINGIFY(n) STRINGIFY_(n)
#if LANGUAGE_CHOICE == 1
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disable Steppers"
#define MSG_AUTO_HOME "Auto Home"
#define MSG_SET_ORIGIN "Set Origin"
#define MSG_PREHEAT_PLA "Preheat PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"
#define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"
#define MSG_COOLDOWN "Cooldown"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_PREHEAT_PLA "Preheat PLA"
#define MSG_PREHEAT_ABS "Preheat ABS"
#define MSG_MOVE_AXIS "Move Axis"
#define MSG_SPEED "Speed"
#define MSG_NOZZLE "Nozzle"
#define MSG_NOZZLE1 "Nozzle2"
#define MSG_NOZZLE2 "Nozzle3"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Fan speed"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Control"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VMAX "Vmax "
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_RECTRACT "Rectract"
#define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Motion"
#define MSG_STORE_EPROM "Store memory"
#define MSG_LOAD_EPROM "Load memory"
#define MSG_RESTORE_FAILSAFE "Restore Failsafe"
#define MSG_REFRESH "Refresh"
#define MSG_WATCH "Watch"
#define MSG_PREPARE "Prepare"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pause Print"
#define MSG_RESUME_PRINT "Resume Print"
#define MSG_STOP_PRINT "Stop Print"
#define MSG_CARD_MENU "Card Menu"
#define MSG_NO_CARD "No Card"
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Wait for user..."
#define MSG_NO_MOVE "No move."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "STOPPED. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACTF "Retract F"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"
#define MSG_AUTORETRACT "AutoRetr."
// Serial Console Messages
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " External Reset"
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Done saving file."
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
#define MSG_FILE_PRINTED "Done printing file"
#define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_END_FILE_LIST "End file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_HEATING "Heating..."
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Count X: "
#define MSG_ERR_KILLED "Printer halted. kill() called!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
#define MSG_RESEND "Resend: "
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_OPENED "File opened: "
#define MSG_SD_SIZE " Size: "
#define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
#define MSG_STEPPER_TO_HIGH "Steprate to high: "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#endif
#if LANGUAGE_CHOICE == 2
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Gotowe."
#define MSG_SD_INSERTED "Karta wlozona"
#define MSG_SD_REMOVED "Karta usunieta"
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Wylacz silniki"
#define MSG_AUTO_HOME "Auto. poz. zerowa"
#define MSG_SET_ORIGIN "Ustaw punkt zerowy"
#define MSG_PREHEAT_PLA "Rozgrzej PLA"
#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"
#define MSG_PREHEAT_ABS "Rozgrzej ABS"
#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"
#define MSG_COOLDOWN "Chlodzenie"
#define MSG_EXTRUDE "Ekstruzja"
#define MSG_RETRACT "Cofanie"
#define MSG_MOVE_AXIS "Ruch osi"
#define MSG_SPEED "Predkosc"
#define MSG_NOZZLE "Dysza"
#define MSG_NOZZLE1 "Dysza2"
#define MSG_NOZZLE2 "Dysza3"
#define MSG_BED "Loze"
#define MSG_FAN_SPEED "Obroty wiatraka"
#define MSG_FLOW "Przeplyw"
#define MSG_CONTROL "Kontrola"
#define MSG_MIN " \002 Min"
#define MSG_MAX " \002 Max"
#define MSG_FACTOR " \002 Mnoznik"
#define MSG_AUTOTEMP "Auto. temp."
#define MSG_ON "Wl. "
#define MSG_OFF "Wyl."
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Acc"
#define MSG_VXY_JERK "Zryw Vxy"
#define MSG_VMAX "Vmax"
#define MSG_X "x"
#define MSG_Y "y"
#define MSG_Z "z"
#define MSG_E "e"
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "Vskok min"
#define MSG_AMAX "Amax"
#define MSG_A_RETRACT "A-wycofanie"
#define MSG_XSTEPS "krokiX/mm"
#define MSG_YSTEPS "krokiY/mm"
#define MSG_ZSTEPS "krokiZ/mm"
#define MSG_ESTEPS "krokiE/mm"
#define MSG_RECTRACT "Wycofanie"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Ruch"
#define MSG_STORE_EPROM "Zapisz w pamieci"
#define MSG_LOAD_EPROM "Wczytaj z pamieci"
#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
#define MSG_REFRESH "\004Odswiez"
#define MSG_WATCH "Obserwuj"
#define MSG_PREPARE "Przygotuj"
#define MSG_CONTROL "Kontroluj"
#define MSG_TUNE "Strojenie"
#define MSG_PAUSE_PRINT "Pauza"
#define MSG_RESUME_PRINT "Wznowienie"
#define MSG_STOP_PRINT "Stop"
#define MSG_CARD_MENU "Menu SDCard"
#define MSG_NO_CARD "Brak karty"
#define MSG_DWELL "Uspij..."
#define MSG_USERWAIT "Czekaj na uzytkownika..."
#define MSG_NO_MOVE "Brak ruchu."
#define MSG_PART_RELEASE "Czesciowe zwolnienie"
#define MSG_KILLED "Ubity. "
#define MSG_STOPPED "Zatrzymany. "
#define MSG_STEPPER_RELEASED "Zwolniony."
#define MSG_CONTROL_RETRACT "Wycofaj mm"
#define MSG_CONTROL_RETRACTF "Wycofaj F"
#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"
#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"
#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof. F"
#define MSG_AUTORETRACT "Auto. wycofanie"
// Serial Console Messages
#define MSG_Enqueing "Kolejkowanie \""
#define MSG_POWERUP "Zasilanie wlaczone"
#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
#define MSG_WATCHDOG_RESET " Reset (watchdog)"
#define MSG_SOFTWARE_RESET " Reset (programowy)"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
#define MSG_FREE_MEMORY " Wolna pamiec: "
#define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Plik zapisany."
#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
#define MSG_BEGIN_FILE_LIST "Start listy plikow"
#define MSG_END_FILE_LIST "Koniec listy plikow"
#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
#define MSG_HEATING "Nagrzewanie ekstrudera..."
#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
#define MSG_BED_HEATING "Nagrzewanie loza..."
#define MSG_BED_DONE "Nagrzewanie loza zakonczone."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Liczenie X: "
#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
#define MSG_RESEND "Wyslij ponownie: "
#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
#define MSG_ENDSTOP_HIT "WYZWOLONY"
#define MSG_ENDSTOP_OPEN "otwarty"
#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
#define MSG_SD_FILE_OPENED "Otwarto plik:"
#define MSG_SD_SIZE " Rozmiar:"
#define MSG_SD_FILE_SELECTED "Wybrano plik"
#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
#define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
#endif
#if LANGUAGE_CHOICE == 3
#define WELCOME_MSG MACHINE_NAME " Pret."
#define MSG_SD_INSERTED "Carte inseree"
#define MSG_SD_REMOVED "Carte retiree"
#define MSG_MAIN " Principal \003"
#define MSG_AUTOSTART " Demarrage auto."
#define MSG_DISABLE_STEPPERS " Desactiver moteurs"
#define MSG_AUTO_HOME " Home auto."
#define MSG_SET_ORIGIN " Regler origine"
#define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"
#define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_PREHEAT_ABS_SETTINGS " Regl. prechauffe ABS"
#define MSG_COOLDOWN " Refroidissement"
#define MSG_EXTRUDE " Extrusion"
#define MSG_RETRACT " Retractation"
#define MSG_PREHEAT_PLA " Prechauffage PLA"
#define MSG_PREHEAT_ABS " Prechauffage ABS"
#define MSG_MOVE_AXIS " Deplacer axe \x7E"
#define MSG_SPEED " Vitesse:"
#define MSG_NOZZLE " \002Buse:"
#define MSG_NOZZLE1 " \002Buse2:"
#define MSG_NOZZLE2 " \002Buse3:"
#define MSG_BED " \002Lit:"
#define MSG_FAN_SPEED " Vitesse ventilateur:"
#define MSG_FLOW " Flux:"
#define MSG_CONTROL " Controle \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Facteur:"
#define MSG_AUTOTEMP " Temp. Auto.:"
#define MSG_ON "Marche "
#define MSG_OFF "Arret"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " Vdepl min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_XSTEPS " Xpas/mm:"
#define MSG_YSTEPS " Ypas/mm:"
#define MSG_ZSTEPS " Zpas/mm:"
#define MSG_ESTEPS " Epas/mm:"
#define MSG_MAIN_WIDE " Principal \003"
#define MSG_RECTRACT_WIDE " Rectractater \x7E"
#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
#define MSG_TEMPERATURE_RTN " Temperature \003"
#define MSG_MOTION_WIDE " Mouvement \x7E"
#define MSG_STORE_EPROM " Sauvegarder memoire"
#define MSG_LOAD_EPROM " Lire memoire"
#define MSG_RESTORE_FAILSAFE " Restaurer memoire"
#define MSG_REFRESH "\004Actualiser"
#define MSG_WATCH " Surveiller \003"
#define MSG_PREPARE " Preparer \x7E"
#define MSG_PREPARE_ALT " Prepare \003"
#define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_RETRACT_ARROW " Retracter \x7E"
#define MSG_TUNE " Regler \x7E"
#define MSG_PAUSE_PRINT " Pause impression \x7E"
#define MSG_RESUME_PRINT " Reprendre impression \x7E"
#define MSG_STOP_PRINT " Arreter impression \x7E"
#define MSG_CARD_MENU " Menu carte \x7E"
#define MSG_NO_CARD " Pas de carte"
#define MSG_DWELL "Repos..."
#define MSG_USERWAIT "Attente de l'utilisateur..."
#define MSG_NO_MOVE "Aucun mouvement."
#define MSG_PART_RELEASE "Relache partielle"
#define MSG_KILLED "TUE."
#define MSG_STOPPED "STOPPE."
#define MSG_STEPPER_RELEASED "RELACHE."
#define MSG_CONTROL_RETRACT " Retractation mm:"
#define MSG_CONTROL_RETRACTF " Retractation F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_AUTORETRACT " Retract. Auto.:"
// Serial Console Messages
#define MSG_Enqueing "Mise en tampon \""
#define MSG_POWERUP "Allumage"
#define MSG_EXTERNAL_RESET " RAZ Externe"
#define MSG_BROWNOUT_RESET " RAZ defaut alim."
#define MSG_WATCHDOG_RESET " RAZ Watchdog"
#define MSG_SOFTWARE_RESET " RAZ logicielle"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Auteur: "
#define MSG_CONFIGURATION_VER " Derniere MaJ: "
#define MSG_FREE_MEMORY " Memoire libre: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Fichier enregistre."
#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "
#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "
#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "
#define MSG_FILE_PRINTED "Impression terminee"
#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"
#define MSG_END_FILE_LIST "Fin de la liste de fichiers"
#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"
#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"
#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"
#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "
#define MSG_HEATING "En chauffe..."
#define MSG_HEATING_COMPLETE "Chauffe terminee."
#define MSG_BED_HEATING "Chauffe du lit."
#define MSG_BED_DONE "Chauffe du lit terminee."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Compteur X: "
#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"
#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"
#define MSG_RESEND "Renvoie: "
#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""
#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "
#define MSG_INVALID_EXTRUDER "Extrudeur invalide"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Affichage du status des fin de course"
#define MSG_ENDSTOP_HIT "DECLENCHE"
#define MSG_ENDSTOP_OPEN "OUVERT"
#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"
#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"
#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"
#define MSG_SD_OPENROOT_FAIL "Echec openRoot"
#define MSG_SD_CARD_OK "Carte SD Ok"
#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"
#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "
#define MSG_SD_FILE_OPENED "Fichier ouvert: "
#define MSG_SD_SIZE " Taille: "
#define MSG_SD_FILE_SELECTED "Fichier selectionne"
#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "
#define MSG_SD_PRINTING_BYTE "Octet impression SD "
#define MSG_SD_NOT_PRINTING "Pas d'impression SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "
#define MSG_STEPPER_TO_HIGH "Steprate trop eleve: "
#define MSG_ENDSTOPS_HIT "Fin de course atteint: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"
#endif
#if LANGUAGE_CHOICE == 4
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Bereit."
#define MSG_SD_INSERTED "SDKarte erkannt"
#define MSG_SD_REMOVED "SDKarte entfernt"
#define MSG_MAIN " Hauptmneü \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Stepper abschalten"
#define MSG_AUTO_HOME " Auto Nullpunkt"
#define MSG_SET_ORIGIN " Setze Nullpunkt"
#define MSG_PREHEAT_PLA " Vorwärmen PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
#define MSG_PREHEAT_ABS " Vorwärmen ABS"
#define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen"
#define MSG_COOLDOWN " Abkühlen"
#define MSG_EXTRUDE " Extrude"
#define MSG_RETRACT " Retract"
#define MSG_MOVE_AXIS " Achsen bewegen\x7E"
#define MSG_SPEED " Geschw:"
#define MSG_NOZZLE " \002Düse:"
#define MSG_NOZZLE1 " \002Düse2:"
#define MSG_NOZZLE2 " \002Düse3:"
#define MSG_BED " \002Bett:"
#define MSG_FAN_SPEED " Lüftergeschw.:"
#define MSG_FLOW " Fluß:"
#define MSG_CONTROL " Einstellungen \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Faktor:"
#define MSG_AUTOTEMP " AutoTemp:"
#define MSG_ON "Ein "
#define MSG_OFF "Aus "
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-Retract:"
#define MSG_XSTEPS " Xsteps/mm:"
#define MSG_YSTEPS " Ysteps/mm:"
#define MSG_ZSTEPS " Zsteps/mm:"
#define MSG_ESTEPS " Esteps/mm:"
#define MSG_MAIN_WIDE " Hauptmenü \003"
#define MSG_RECTRACT_WIDE " Rectract \x7E"
#define MSG_WATCH " Beobachten \003"
#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
#define MSG_TEMPERATURE_RTN " Temperatur \003"
#define MSG_MOTION_WIDE " Bewegung \x7E"
#define MSG_STORE_EPROM " EPROM speichern"
#define MSG_LOAD_EPROM " EPROM laden"
#define MSG_RESTORE_FAILSAFE " Standardkonfig."
#define MSG_REFRESH "\004Aktualisieren"
#define MSG_PREPARE " Vorbereitung \x7E"
#define MSG_PREPARE_ALT " Vorbereitung \003"
#define MSG_CONTROL_ARROW " Einstellungen \x7E"
#define MSG_TUNE " Justierung \x7E"
#define MSG_PAUSE_PRINT " Druck anhalten\x7E"
#define MSG_RESUME_PRINT " Druck fortsetz\x7E"
#define MSG_STOP_PRINT " Druck stoppen \x7E"
#define MSG_CARD_MENU " SDKarten Menü \x7E"
#define MSG_NO_CARD " Keine SDKarte"
#define MSG_DWELL "Warten..."
#define MSG_USERWAIT "Warte auf Nutzer..."
#define MSG_NO_MOVE "Kein Zug."
#define MSG_PART_RELEASE "Stepper tlw frei"
#define MSG_KILLED "KILLED"
#define MSG_STOPPED "GESTOPPT"
#define MSG_STEPPER_RELEASED "Stepper frei"
#define MSG_CONTROL_RETRACT " Retract mm:"
#define MSG_CONTROL_RETRACTF " Retract F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_AUTORETRACT " AutoRetr.:"
// Serial Console Messages
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " External Reset"
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin: "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Last Updated: "
#define MSG_FREE_MEMORY " Free Memory: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Done saving file."
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
#define MSG_FILE_PRINTED "Done printing file"
#define MSG_BEGIN_FILE_LIST "Begin file list"
#define MSG_END_FILE_LIST "End file list"
#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
#define MSG_HEATING "Heating..."
#define MSG_HEATING_COMPLETE "Heating done."
#define MSG_BED_HEATING "Bed Heating."
#define MSG_BED_DONE "Bed done."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Printer halted. kill() called !!"
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
#define MSG_RESEND "Resend:"
#define MSG_UNKNOWN_COMMAND "Unknown command:\""
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Reporting endstop status"
#define MSG_ENDSTOP_HIT "TRIGGERED"
#define MSG_ENDSTOP_OPEN "open"
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
#define MSG_SD_INIT_FAIL "SD init fail"
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
#define MSG_SD_FILE_OPENED "File opened:"
#define MSG_SD_SIZE " Size:"
#define MSG_SD_FILE_SELECTED "File selected"
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
#define MSG_SD_PRINTING_BYTE "SD printing byte "
#define MSG_SD_NOT_PRINTING "Not SD printing"
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
#define MSG_STEPPER_TO_HIGH "Steprate to high : "
#define MSG_ENDSTOPS_HIT "endstops hit: "
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
#endif
#if LANGUAGE_CHOICE == 5
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Lista."
#define MSG_SD_INSERTED "Tarjeta SD Colocada"
#define MSG_SD_REMOVED "Tarjeta SD Retirada"
#define MSG_MAIN " Menu Principal \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Apagar Motores"
#define MSG_AUTO_HOME " Llevar Ejes al Cero"
#define MSG_SET_ORIGIN " Establecer Cero"
#define MSG_COOLDOWN " Enfriar"
#define MSG_EXTRUDE " Extruir"
#define MSG_RETRACT " Retraer"
#define MSG_PREHEAT_PLA " Precalentar PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
#define MSG_PREHEAT_ABS " Precalentar ABS"
#define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
#define MSG_MOVE_AXIS " Mover Ejes \x7E"
#define MSG_SPEED " Velocidad:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_NOZZLE1 " \002Nozzle2:"
#define MSG_NOZZLE2 " \002Nozzle3:"
#define MSG_BED " \002Base:"
#define MSG_FAN_SPEED " Ventilador:"
#define MSG_FLOW " Flujo:"
#define MSG_CONTROL " Control \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retrac.:"
#define MSG_XSTEPS " Xpasos/mm:"
#define MSG_YSTEPS " Ypasos/mm:"
#define MSG_ZSTEPS " Zpasos/mm:"
#define MSG_ESTEPS " Epasos/mm:"
#define MSG_MAIN_WIDE " Menu Principal \003"
#define MSG_RECTRACT_WIDE " Retraer \x7E"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
#define MSG_TEMPERATURE_RTN " Temperatura \003"
#define MSG_MOTION_WIDE " Movimiento \x7E"
#define MSG_STORE_EPROM " Guardar Memoria"
#define MSG_LOAD_EPROM " Cargar Memoria"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
#define MSG_REFRESH "\004Volver a cargar"
#define MSG_WATCH " Monitorizar \003"
#define MSG_PREPARE " Preparar \x7E"
#define MSG_PREPARE_ALT " Preparar \003"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_RETRACT_ARROW " Retraer \x7E"
#define MSG_TUNE " Ajustar \x7E"
#define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
#define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
#define MSG_STOP_PRINT " Detener Impresion \x7E"
#define MSG_CARD_MENU " Menu de SD \x7E"
#define MSG_NO_CARD " No hay Tarjeta SD"
#define MSG_DWELL "Reposo..."
#define MSG_USERWAIT "Esperando Ordenes..."
#define MSG_NO_MOVE "Sin movimiento"
#define MSG_PART_RELEASE "Desacople Parcial"
#define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_STOPPED "PARADA. "
#define MSG_STEPPER_RELEASED "Desacoplada."
#define MSG_CONTROL_RETRACT " Retraer mm:"
#define MSG_CONTROL_RETRACTF " Retraer F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
#define MSG_AUTORETRACT " AutoRetr.:"
// Serial Console Messages
#define MSG_Enqueing "En cola \""
#define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
#define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autor: "
#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
#define MSG_FREE_MEMORY " Memoria libre: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Guardado."
#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
#define MSG_FILE_PRINTED "Impresion terminada"
#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
#define MSG_END_FILE_LIST "Fin de la lista de archivos"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
#define MSG_HEATING "Calentando..."
#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
#define MSG_BED_HEATING "Calentando la base."
#define MSG_BED_DONE "Base Caliente."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Cuenta X:"
#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
#define MSG_RESEND "Reenviar:"
#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_M119_REPORT "Comprobando fines de carrera."
#define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_ENDSTOP_OPEN "abierto"
#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
#define MSG_SD_CARD_OK "Tarjeta SD OK"
#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
#define MSG_SD_FILE_OPENED "Archivo abierto:"
#define MSG_SD_SIZE " Tamaño:"
#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
12 years ago
#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
#endif
#if LANGUAGE_CHOICE == 6
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Готов."
#define MSG_SD_INSERTED "Карта вставлена"
#define MSG_SD_REMOVED "Карта извлечена"
#define MSG_MAIN " Меню \003"
#define MSG_AUTOSTART " Автостарт "
#define MSG_DISABLE_STEPPERS " Выключить двигатели"
#define MSG_AUTO_HOME " Парковка "
#define MSG_SET_ORIGIN " Запомнить ноль "
#define MSG_PREHEAT_PLA " Преднагрев PLA "
#define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
#define MSG_PREHEAT_ABS " Преднагрев ABS "
#define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
#define MSG_COOLDOWN " Охлаждение "
#define MSG_EXTRUDE " Экструзия "
#define MSG_RETRACT " Откат"
#define MSG_MOVE_AXIS " Движение по осям \x7E"
#define MSG_SPEED " Скорость:"
#define MSG_NOZZLE " \002 Фильера:"
#define MSG_NOZZLE1 " \002 Фильера2:"
#define MSG_NOZZLE2 " \002 Фильера3:"
#define MSG_BED " \002 Кровать:"
#define MSG_FAN_SPEED " Куллер:"
#define MSG_FLOW " Поток:"
#define MSG_CONTROL " Настройки \003"
#define MSG_MIN " \002 Минимум:"
#define MSG_MAX " \002 Максимум:"
#define MSG_FACTOR " \002 Фактор:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "Вкл. "
#define MSG_OFF "Выкл. "
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_XSTEPS " X шаг/mm:"
#define MSG_YSTEPS " Y шаг/mm:"
#define MSG_ZSTEPS " Z шаг/mm:"
#define MSG_ESTEPS " E шаг/mm:"
#define MSG_MAIN_WIDE " Меню \003"
#define MSG_RECTRACT_WIDE " Откат подачи \x7E"
#define MSG_TEMPERATURE_WIDE " Температура \x7E"
#define MSG_TEMPERATURE_RTN " Температура \003"
#define MSG_MOTION_WIDE " Скорости \x7E"
#define MSG_STORE_EPROM " Сохранить настройки"
#define MSG_LOAD_EPROM " Загрузить настройки"
#define MSG_RESTORE_FAILSAFE " Сброс настроек "
#define MSG_REFRESH "\004Обновить "
#define MSG_WATCH " Обзор \003"
#define MSG_PREPARE " Действия \x7E"
#define MSG_PREPARE_ALT " Действия \003"
#define MSG_CONTROL_ARROW " Настройки \x7E"
#define MSG_RETRACT_ARROW " Настройки отката \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_PAUSE_PRINT " Пауза печати \x7E"
#define MSG_RESUME_PRINT " Продолжить печать \x7E"
#define MSG_STOP_PRINT " Остановить печать \x7E"
#define MSG_CARD_MENU " Меню карты \x7E"
#define MSG_NO_CARD " Нет карты"
#define MSG_DWELL "Сон..."
#define MSG_USERWAIT "Нажмите для продолж."
#define MSG_NO_MOVE "Нет движения. "
#define MSG_PART_RELEASE " Извлечение принта "
#define MSG_KILLED "УБИТО. "
#define MSG_STOPPED "ОСТАНОВЛЕНО. "
#define MSG_STEPPER_RELEASED "Двигатели отключены."
#define MSG_CONTROL_RETRACT " Откат mm:"
#define MSG_CONTROL_RETRACTF " Откат F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
#define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
#define MSG_AUTORETRACT " АвтоОткат:"
// Serial Console Messages
#define MSG_Enqueing "Запланировано \""
#define MSG_POWERUP "Включение питания"
#define MSG_EXTERNAL_RESET " Внешний сброс"
#define MSG_BROWNOUT_RESET " Brown out сброс"
#define MSG_WATCHDOG_RESET " Watchdog сброс"
#define MSG_SOFTWARE_RESET " программный сброс"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Автор: "
#define MSG_CONFIGURATION_VER " Последнее обновление: "
#define MSG_FREE_MEMORY " Памяти свободно: "
#define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Файл записан."
#define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
#define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
#define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
#define MSG_FILE_PRINTED "Печать файла завершена"
#define MSG_BEGIN_FILE_LIST "Список файлов"
#define MSG_END_FILE_LIST "Конец списка файлов"
#define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
#define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
#define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
#define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
#define MSG_HEATING "Нагрев... "
#define MSG_HEATING_COMPLETE "Наргето. "
#define MSG_BED_HEATING "Нагрев стола... "
#define MSG_BED_DONE "Стол нагрет. "
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Count X:"
#define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
#define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
#define MSG_RESEND "Переотправка:"
#define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
#define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
#define MSG_INVALID_EXTRUDER "Ошибка экструдера"
#define MSG_X_MIN "x_min:"
#define MSG_X_MAX "x_max:"
#define MSG_Y_MIN "y_min:"
#define MSG_Y_MAX "y_max:"
#define MSG_Z_MIN "z_min:"
#define MSG_Z_MAX "z_max:"
#define MSG_SD_CANT_OPEN_SUBDIR "Не открыть папку"
#define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
#define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
#define MSG_SD_OPENROOT_FAIL "Не прочесть содержимое корня"
#define MSG_SD_CARD_OK "SD карта в порядке"
#define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
#define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
#define MSG_SD_FILE_OPENED "Файл открыт:"
#define MSG_SD_SIZE " Размер:"
#define MSG_SD_FILE_SELECTED "Файл выбран"
#define MSG_SD_WRITE_TO_FILE "Запись в файл: "
#define MSG_SD_PRINTING_BYTE "SD печать byte "
#define MSG_SD_NOT_PRINTING "нет SD печати"
#define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
#define MSG_SD_CANT_ENTER_SUBDIR "Не зайти в папку:"
#define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
#define MSG_ENDSTOPS_HIT "концевик сработал: "
#define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
#define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
#define MSG_M119_REPORT "Статус концевиков"
#define MSG_ENDSTOP_HIT "Срабатывание концевика"
#define MSG_ENDSTOP_OPEN "Концевик освобожден"
#endif
#if LANGUAGE_CHOICE == 7
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Pronto."
#define MSG_SD_INSERTED "SD Card inserita"
#define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_MAIN " Menu principale \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disabilita Motori Passo-Passo"
#define MSG_AUTO_HOME " Auto Home"
#define MSG_SET_ORIGIN " Imposta Origini Assi"
#define MSG_PREHEAT_PLA " Preriscalda PLA"
#define MSG_PREHEAT_PLA_SETTINGS " Impostazioni Preriscaldamento PLA"
#define MSG_PREHEAT_ABS " Preriscalda ABS"
#define MSG_PREHEAT_ABS_SETTINGS " Impostazioni Preriscaldamento ABS"
#define MSG_COOLDOWN " Rafredda"
#define MSG_EXTRUDE " Estrudi"
#define MSG_RETRACT " Ritrai"
#define MSG_MOVE_AXIS " Muovi Asse \x7E"
#define MSG_SPEED " Velcità:"
#define MSG_NOZZLE " \002Ugello:"
#define MSG_NOZZLE1 " \002Ugello2:"
#define MSG_NOZZLE2 " \002Ugello3:"
#define MSG_BED " \002Piatto:"
#define MSG_FAN_SPEED " Velocità Ventola:"
#define MSG_FLOW " Flusso:"
#define MSG_CONTROL " Controllo \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-ritrai:"
#define MSG_XSTEPS " Xpassi/mm:"
#define MSG_YSTEPS " Ypassi/mm:"
#define MSG_ZSTEPS " Zpassi/mm:"
#define MSG_ESTEPS " Epassi/mm:"
#define MSG_MAIN_WIDE " Menu Principale \003"
#define MSG_RECTRACT_WIDE " Ritrai \x7E"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
#define MSG_TEMPERATURE_RTN " Temperatura \003"
#define MSG_MOTION_WIDE " Movimento \x7E"
#define MSG_STORE_EPROM " Salva in memoria"
#define MSG_LOAD_EPROM " Carica dalla memoria"
#define MSG_RESTORE_FAILSAFE " Configurazioni di default"
#define MSG_REFRESH "\004Aggiorna"
#define MSG_WATCH " Guarda \003"
#define MSG_PREPARE " Prepara \x7E"
#define MSG_PREPARE_ALT " Prepara \003"
#define MSG_CONTROL_ARROW " Controllo \x7E"
#define MSG_RETRACT_ARROW " Ritrai \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_PAUSE_PRINT " Metti in Pausa la Stampa \x7E"
#define MSG_RESUME_PRINT " Riprendi Stampa \x7E"
#define MSG_STOP_PRINT " Arresta Stampa \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_DWELL " Sospensione..."
#define MSG_USERWAIT "Attendi utente..."
#define MSG_NO_MOVE "Nessun movimento."
#define MSG_PART_RELEASE "Rilascio Parziale"
#define MSG_KILLED "UCCISO. "
#define MSG_STOPPED "ARRESTATO. "
#define MSG_STEPPER_RELEASED "Rilasciato."
#define MSG_CONTROL_RETRACT " Ritrai mm:"
#define MSG_CONTROL_RETRACTF " Ritrai F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Salta mm:"
#define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
#define MSG_AUTORETRACT " AutoRilascio.:"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
// Serial Console Messages
#define MSG_Enqueing "accodamento \""
#define MSG_POWERUP "Accensione"
#define MSG_EXTERNAL_RESET " Reset Esterno"
#define MSG_BROWNOUT_RESET " Brown out Reset"
#define MSG_WATCHDOG_RESET " Watchdog Reset"
#define MSG_SOFTWARE_RESET " Software Reset"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Autore: "
#define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
#define MSG_FREE_MEMORY " Memoria Libera: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "File Salvato."
#define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea:"
#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea:"
#define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea:"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea:"
#define MSG_FILE_PRINTED "File stampato"
#define MSG_BEGIN_FILE_LIST "Inizio Lista File"
#define MSG_END_FILE_LIST "Fine Lista File"
#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
#define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
#define MSG_HEATING "Riscaldamento..."
#define MSG_HEATING_COMPLETE "Riscaldamento concluso."
#define MSG_BED_HEATING "Riscaldamento Piatto."
#define MSG_BED_DONE "Piatto Pronto."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Calcola X:"
#define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
#define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
#define MSG_RESEND "Reinviato:"
#define MSG_UNKNOWN_COMMAND "Comando sconosciuto:\""
#define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
#define MSG_INVALID_EXTRUDER "Estrusore non valido"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Segnalazione stato degli endstop"
#define MSG_ENDSTOP_HIT "INNESCATO"
#define MSG_ENDSTOP_OPEN "aperto"
#define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
#define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
#define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
#define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
#define MSG_SD_CARD_OK "SD card ok"
#define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
#define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
#define MSG_SD_FILE_OPENED "File aperto:"
#define MSG_SD_SIZE " Dimensione:"
#define MSG_SD_FILE_SELECTED "File selezionato"
#define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
#define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
#define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella:"
#define MSG_STEPPER_TO_HIGH "Steprate troppo alto : "
#define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
#endif
#if LANGUAGE_CHOICE == 8
// LCD Menu Messages
#define WELCOME_MSG MACHINE_NAME " Pronta."
#define MSG_SD_INSERTED "Cartao SD inserido"
#define MSG_SD_REMOVED "Cartao SD removido"
#define MSG_MAIN " Menu Principal \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Apagar Motores"
#define MSG_AUTO_HOME " Ir para Origen"
#define MSG_SET_ORIGIN " Estabelecer Origen"
#define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
#define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
#define MSG_COOLDOWN " Esfriar"
#define MSG_EXTRUDE " Extrudar"
#define MSG_RETRACT " Retrair"
#define MSG_PREHEAT_PLA " pre-aquecer PLA"
#define MSG_PREHEAT_ABS " pre-aquecer ABS"
#define MSG_MOVE_AXIS " Mover eixo \x7E"
#define MSG_SPEED " Velocidade:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_NOZZLE1 " \002Nozzle2:"
#define MSG_NOZZLE2 " \002Nozzle3:"
#define MSG_BED " \002Base:"
#define MSG_FAN_SPEED " Velocidade Ventoinha:"
#define MSG_FLOW " Fluxo:"
#define MSG_CONTROL " Controle \003"
#define MSG_MIN " \002 Min:"
#define MSG_MAX " \002 Max:"
#define MSG_FACTOR " \002 Fact:"
#define MSG_AUTOTEMP " Autotemp:"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P " PID-P: "
#define MSG_PID_I " PID-I: "
#define MSG_PID_D " PID-D: "
#define MSG_PID_C " PID-C: "
#define MSG_ACC " Acc:"
#define MSG_VXY_JERK " Vxy-jerk: "
#define MSG_VMAX " Vmax "
#define MSG_X "x:"
#define MSG_Y "y:"
#define MSG_Z "z:"
#define MSG_E "e:"
#define MSG_VMIN " Vmin:"
#define MSG_VTRAV_MIN " VTrav min:"
#define MSG_AMAX " Amax "
#define MSG_A_RETRACT " A-retract:"
#define MSG_XSTEPS " Xpasso/mm:"
#define MSG_YSTEPS " Ypasso/mm:"
#define MSG_ZSTEPS " Zpasso/mm:"
#define MSG_ESTEPS " Epasso/mm:"
#define MSG_MAIN_WIDE " Menu Principal \003"
#define MSG_RECTRACT_WIDE " Retrair \x7E"
#define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
#define MSG_TEMPERATURE_RTN " Temperatura \003"
#define MSG_MOTION_WIDE " Movimento \x7E"
#define MSG_STORE_EPROM " Guardar memoria"
#define MSG_LOAD_EPROM " Carregar memoria"
#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
#define MSG_REFRESH "\004Recarregar"
#define MSG_WATCH " Monitorar \003"
#define MSG_PREPARE " Preparar \x7E"
#define MSG_PREPARE_ALT " Preparar \003"
#define MSG_CONTROL_ARROW " Controle \x7E"
#define MSG_RETRACT_ARROW " Retrair \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
#define MSG_RESUME_PRINT " Resumir Impressao \x7E"
#define MSG_STOP_PRINT " Parar Impressao \x7E"
#define MSG_CARD_MENU " Menu cartao SD \x7E"
#define MSG_NO_CARD " Sem cartao SD"
#define MSG_DWELL "Repouso..."
#define MSG_USERWAIT "Esperando Ordem..."
#define MSG_NO_MOVE "Sem movimento."
#define MSG_PART_RELEASE "Lancamento Parcial"
#define MSG_KILLED "PARADA DE EMERGENCIA. "
#define MSG_STOPPED "PARADA. "
#define MSG_STEPPER_RELEASED "Lancado."
#define MSG_CONTROL_RETRACT " Retrair mm:"
#define MSG_CONTROL_RETRACTF " Retrair F:"
#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
#define MSG_AUTORETRACT " AutoRetr.:"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
// Serial Console Messages
#define MSG_Enqueing "enqueing \""
#define MSG_POWERUP "PowerUp"
#define MSG_EXTERNAL_RESET " Reset Externo"
#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
#define MSG_WATCHDOG_RESET " Reset por Bloqueio"
#define MSG_SOFTWARE_RESET " Reset por Software"
#define MSG_MARLIN "Marlin "
#define MSG_AUTHOR " | Author: "
#define MSG_CONFIGURATION_VER " Ultima atualizacao: "
#define MSG_FREE_MEMORY " memoria Livre: "
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
#define MSG_OK "ok"
#define MSG_FILE_SAVED "Guardado."
#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
#define MSG_FILE_PRINTED "Impressao terminada"
#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
#define MSG_END_FILE_LIST "Fim da lista de arquivos"
#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
#define MSG_HEATING "Aquecendo..."
#define MSG_HEATING_COMPLETE "Aquecido."
#define MSG_BED_HEATING "Aquecendo a Base."
#define MSG_BED_DONE "Base quente."
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
#define MSG_COUNT_X " Conta X:"
#define MSG_ERR_KILLED "Impressora parada com kill() !!"
#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
#define MSG_RESEND "Reenviar:"
#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
#define MSG_INVALID_EXTRUDER "Extrusor invalido"
#define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: "
#define MSG_Y_MAX "y_max: "
#define MSG_Z_MIN "z_min: "
#define MSG_Z_MAX "z_max: "
#define MSG_M119_REPORT "Relatando estado do ponto final"
#define MSG_ENDSTOP_HIT "PULSADO"
#define MSG_ENDSTOP_OPEN "Aberto"
#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
#define MSG_SD_CARD_OK "cartao SD ok"
#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
#define MSG_SD_FILE_OPENED "Arquivo aberto:"
#define MSG_SD_SIZE " Size:"
#define MSG_SD_FILE_SELECTED "Arquivo selecionado"
#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
#define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
#endif
#endif // ifndef LANGUAGE_H