Marlin 2.0 for Flying Bear 4S/5
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

149 lines
4.6 KiB

/**********************************************************************
* $Id$ lpc17xx_nvic.c 2010-05-21
*//**
* @file lpc17xx_nvic.c
* @brief Contains all expansion functions support for
* NVIC firmware library on LPC17xx. The main
* NVIC functions are defined in core_cm3.h
* @version 2.0
* @date 21. May. 2010
* @author NXP MCU SW Application Team
*
* Copyright(C) 2010, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @addtogroup NVIC
* @{
*/
/* Includes ------------------------------------------------------------------- */
#include "lpc17xx_nvic.h"
/* Private Macros ------------------------------------------------------------- */
/** @addtogroup NVIC_Private_Macros
* @{
*/
/* Vector table offset bit mask */
#define NVIC_VTOR_MASK 0x3FFFFF80
/**
* @}
*/
/* Public Functions ----------------------------------------------------------- */
/** @addtogroup NVIC_Public_Functions
* @{
*/
/*****************************************************************************//**
* @brief De-initializes the NVIC peripheral registers to their default
* reset values.
* @param None
* @return None
*
* These following NVIC peripheral registers will be de-initialized:
* - Disable Interrupt (32 IRQ interrupt sources that matched with LPC17xx)
* - Clear all Pending Interrupts (32 IRQ interrupt source that matched with LPC17xx)
* - Clear all Interrupt Priorities (32 IRQ interrupt source that matched with LPC17xx)
*******************************************************************************/
void NVIC_DeInit(void)
{
uint8_t tmp;
/* Disable all interrupts */
NVIC->ICER[0] = 0xFFFFFFFF;
NVIC->ICER[1] = 0x00000001;
/* Clear all pending interrupts */
NVIC->ICPR[0] = 0xFFFFFFFF;
NVIC->ICPR[1] = 0x00000001;
/* Clear all interrupt priority */
for (tmp = 0; tmp < 32; tmp++) {
NVIC->IP[tmp] = 0x00;
}
}
/*****************************************************************************//**
* @brief De-initializes the SCB peripheral registers to their default
* reset values.
* @param none
* @return none
*
* These following SCB NVIC peripheral registers will be de-initialized:
* - Interrupt Control State register
* - Interrupt Vector Table Offset register
* - Application Interrupt/Reset Control register
* - System Control register
* - Configuration Control register
* - System Handlers Priority Registers
* - System Handler Control and State Register
* - Configurable Fault Status Register
* - Hard Fault Status Register
* - Debug Fault Status Register
*******************************************************************************/
void NVIC_SCBDeInit(void)
{
uint8_t tmp;
SCB->ICSR = 0x0A000000;
SCB->VTOR = 0x00000000;
SCB->AIRCR = 0x05FA0000;
SCB->SCR = 0x00000000;
SCB->CCR = 0x00000000;
7 years ago
for (tmp = 0; tmp < (sizeof(SCB->SHP) / sizeof(SCB->SHP[0])); tmp++) {
SCB->SHP[tmp] = 0x00;
}
SCB->SHCSR = 0x00000000;
SCB->CFSR = 0xFFFFFFFF;
SCB->HFSR = 0xFFFFFFFF;
SCB->DFSR = 0xFFFFFFFF;
}
/*****************************************************************************//**
* @brief Set Vector Table Offset value
* @param offset Offset value
* @return None
*******************************************************************************/
void NVIC_SetVTOR(uint32_t offset)
{
// SCB->VTOR = (offset & NVIC_VTOR_MASK);
SCB->VTOR = offset;
}
/**
* @}
*/
/**
* @}
*/
/* --------------------------------- End Of File ------------------------------ */