[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
/**
|
|
|
|
|
* Marlin 3D Printer Firmware
|
|
|
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
*
|
|
|
|
|
* Based on Sprinter and grbl.
|
|
|
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
*
|
|
|
|
|
* This program is free software: you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
|
|
|
* (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
#pragma once
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* MALYAN M200 pin assignments
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#if NOT_TARGET(__STM32F1__, STM32F1xx, STM32F0xx)
|
|
|
|
|
#error "Oops! Select an STM32 board in your IDE."
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef BOARD_INFO_NAME
|
|
|
|
|
#define BOARD_INFO_NAME "Malyan M200"
|
|
|
|
|
#endif
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
// Prevents hanging from an extra watchdog init
|
|
|
|
|
#define DISABLE_WATCHDOG_INIT
|
|
|
|
|
|
|
|
|
|
// Assume Flash EEPROM
|
|
|
|
|
#if NO_EEPROM_SELECTED
|
|
|
|
|
#define FLASH_EEPROM_EMULATION
|
|
|
|
|
#endif
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
#define SDSS SD_SS_PIN // Also in HAL/STM32F1/spi_pins.h
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
// Based on PWM timer usage, we have to use these timers and soft PWM for the fans
|
|
|
|
|
// On STM32F103:
|
|
|
|
|
// PB3, PB6, PB7, and PB8 can be used with pwm, which rules out TIM2 and TIM4.
|
|
|
|
|
// On STM32F070, 16 and 17 are in use, but 1 and 3 are available.
|
Squashed commit of the following:
commit 4b9fce2e8588f5dea0658e93fa0260830a851874
Merge: ecb08b15be e17d710c5c
Author: Sergey <sergey@terentiev.me>
Date: Mon Dec 27 16:47:22 2021 +0300
Merge branch '2.0.x' into vanilla_fb_2.0.x
commit e17d710c5c4c96e069f64854e3fcdb77abcf90e1
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat Dec 25 22:13:20 2021 -0600
🔖 Marlin 2.0.9.3
commit 9b13ae239953df3b00ad18a241e001723c3f4756
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Sat Dec 25 19:41:01 2021 -0800
🐛 Fix MKS Robin E3 NeoPixel pin default (#23350)
commit 06f36dc7467f0053767f307a18933df556074d99
Author: kaidegit <60053077+kaidegit@users.noreply.github.com>
Date: Sun Dec 26 10:12:20 2021 +0800
🐛 Fix open for bin rename (#23351)
commit 98eca9cb23084f0c21ae85b382e6f473eb40ebbf
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat Dec 25 03:27:45 2021 -0600
🔧 Move MOTHERBOARD closer to top
commit 626879500388c4a203022c5fc03c32d5a8281348
Author: fflosi <34758322+fflosi@users.noreply.github.com>
Date: Sat Dec 25 05:57:07 2021 -0300
✨ Per-axis TMC hold multiplier (#23345)
commit b4f0922a7caea03b3c3315d48d86109bcc84c4be
Author: Sola <42537573+solawc@users.noreply.github.com>
Date: Fri Dec 24 14:03:32 2021 +0800
✨ MKS TinyBee board support (#23340)
Co-Authored-By: Sola <42537573+solawc@users.noreply.github.com>
commit aef613acd394d72d17cda8b431bcfcc2165c9608
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Thu Dec 23 15:19:39 2021 +0700
🔧 Group FAST_PWM_FAN.options (#23331)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 9ecfa1d2528a57eaa71a25acaac3e87fb45e0eb1
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date: Tue Dec 21 23:09:55 2021 -0500
✨ BLTouch High Speed mode runtime configuration (#22916, #23337)
Co-Authored-By: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit e0bed1e344946154cc94cb58fbca281b360ee4a9
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Wed Dec 22 15:44:04 2021 +1300
✨ Option to reset EEPROM on first run (#23276)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit d21fa25ab8c369ff800e0451c75fe9f9e6134878
Author: Spencer Owen <owenspencer@gmail.com>
Date: Sat Dec 18 18:58:46 2021 -0700
✨ Creality3D V4.2.3 / Ender-2 Pro board (#23307)
commit 0dc1a58b241217899c88945ea8f6f8dc8f39470e
Author: X-Ryl669 <boite.pour.spam@gmail.com>
Date: Tue Dec 14 07:22:06 2021 +0100
✨ Configurations embed and retrieve (#21321, #23303)
commit f2ca70e2328c3158d54c302dca310bf2ed5d465d
Author: John Lagonikas <39417467+zeleps@users.noreply.github.com>
Date: Wed Dec 8 20:55:09 2021 +0200
🐛 Fix and improve MAX31865 (#23215)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit a6bed228391afe290e8fe4181f624f21dd461b73
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date: Sat Dec 11 03:38:03 2021 +0800
✨ BigTreeTech SKR mini E3 V3.0 (STM32G0B1RET6) (#23283)
commit efd67cf80d1eebd1470bd7c8b822e9103d70e778
Author: Giuseppe499 <giuseppe499@live.it>
Date: Tue Dec 7 02:53:51 2021 +0100
✨ X Twist Compensation & Calibration (#23238)
commit 15204470a8da2b579dab029cf8bdf6038914e462
Author: ladismrkolj <ladismrkolj@gmail.com>
Date: Sun Dec 5 22:41:39 2021 +0100
🔧 Chamber Fan index option (#23262)
commit 48358d6a5c4eccb4dd1b4d141c38cf45304b4df7
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Fri Dec 3 12:48:48 2021 -0600
🏗️ Fix Maple HAL/STM32F1 PWM (#23211)
commit d7abb891cd91ef991234784a0b707346ac34e53a
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Fri Dec 3 19:31:48 2021 +0100
🏗️ Rework STM32 timer frequency protection (#23187)
commit 52a44eb200b8e14d7738565f50888d34cc5200f0
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue Nov 30 15:04:05 2021 -0600
🐛 Fix STM32 FastPWM
commit 9b1c0a75e18faf754a55ec324ac327ba2a25819f
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Nov 27 18:33:32 2021 -0600
🎨 Rename HAL timer elements
commit d75e7784e50dad2b9f598ef559958e9015e64550
Author: schmttc <89831403+schmttc@users.noreply.github.com>
Date: Wed Nov 24 08:52:18 2021 +1100
✨ EasyThreeD ET4000+ board and UI (#23080)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 0e60c8b7e04a6cd2758108bcc80f2ab57deec23c
Author: John Robertson <john@cirtech.co.uk>
Date: Tue Nov 23 21:24:24 2021 +0000
✨ MarkForged YX kinematics (#23163)
commit 018c7b1cf4d3b2b54287f61b478e813041c1c661
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Sun Nov 21 11:25:06 2021 -0800
✨ BigTreeTech Mini 12864 V1.0 (#23130)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit af1d603374a34cfc2d8b34fce269a0a6683d7c68
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date: Tue Nov 23 21:01:53 2021 +0100
✨ Fan tachometer support (#23086, #23180, #23199)
Co-Authored-By: Scott Lahteine <github@thinkyhead.com>
commit 884308f964ddb92c1371bc9ec96e587ef04336e0
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Nov 16 08:54:30 2021 -0600
🔧 SOUND_MENU_ITEM for E3V2
commit 7269990413a630b134f3e990fe188c522659dca9
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date: Wed Nov 10 11:31:35 2021 -0500
🚸 Expose sub-options for E3V2 Enhanced (#23099)
commit 2a90d93b17c1014f6a29b0ecc015c7fbc469fbdc
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Wed Nov 17 09:33:42 2021 -0800
📌 Overridable probe-related pins (#23107)
commit 6e284f882388d314517544b6c2e46f7cff7c99e8
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date: Wed Nov 10 23:56:10 2021 +0800
✨ Support for BIQU B1-SE-Plus strain gauge probe (#23101)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit a2349fc411321ae4ff2bb286af04bb7543963c72
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Fri Dec 24 23:47:52 2021 -0600
🔨 Configurable firmware bin filename
Configuration.h > FIRMWARE_BIN
commit a3964b2b40f97507edb7b25ea4c47b37db2a1aaa
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Fri Dec 24 20:59:28 2021 -0600
🔨 Ignore more generated files
commit 226ee7c1f3e1b8f88759a1dc49f329ab9afb3270
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Fri Dec 24 01:46:51 2021 -0600
🔧 Sanity check MMU2_MENUS
commit 2c12171f46488a31cb5d4d78868892ad2918e298
Author: Attila BODY <attila.body@gmail.com>
Date: Fri Dec 24 06:57:20 2021 +0100
🐛 Fix Robin Nano v3 filament runout pins (#23344)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit d034a9c295c787ee06c76d65ce61f34cb9f0a795
Author: MrAlvin <umo-testing@3iii.dk>
Date: Thu Dec 23 10:47:52 2021 +0100
🚸 Show mm'ss during first hour (#23335)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit d2c7104bb37ca7e10622dfe1e1f0a6e5c3d23240
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Wed Dec 15 07:51:19 2021 +0700
🚸 Change "SD" to "Media" or "SD/FD" (#23297)
commit 570c7e86380adb2071a94a433dc6babf6c8f9e32
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Wed Dec 22 13:48:38 2021 +1300
🐛 Fix Chitu Z_STOP_PIN (#23330)
commit cc4578a3d33b67268d26255139eceff1c805ec52
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Thu Dec 23 07:49:15 2021 +0100
🩹 Fix settings G21 report (#23338)
commit 1db84be66aee65ca120b6f9d3203ac0e19699c30
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Tue Dec 21 01:26:31 2021 -0600
🚑️ FAST_PWM_FAN default 1KHz base freq. (#23326)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 77c9668fe2b897ee142539a0124f359fcb8de070
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Tue Dec 14 19:25:28 2021 +1300
🐛 Fix LCD_BED_LEVELING compile (#23298)
commit 22cf9b444e9185ef173ebf145f3bb9207d266ec4
Author: GHGiampy <83699429+GHGiampy@users.noreply.github.com>
Date: Mon Dec 20 09:44:43 2021 +0100
🧑💻 Option allowing > 127 Neopixels (#23322)
commit 97798d1e47d2211827cccadc31f61b59e0e9e667
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Thu Jul 8 01:33:49 2021 -0500
🎨 Update SKR V2 pins
commit f4b808456ac5b2ce55329a2ad8db00b6cc9510cb
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date: Tue Dec 14 01:47:57 2021 +0100
🚸 Use M600 for disabled MMU (#21865)
commit 62647369681c3449c7f3ee31d4f4d2da6f3ada9c
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Tue Dec 14 01:41:21 2021 +0100
🐛 Fix TFT_COLOR_UI Release Media issue (#23123)
commit 7a5f103bcf6c3387ab832d64244e252a16e230a6
Author: John Lagonikas <39417467+zeleps@users.noreply.github.com>
Date: Sat Dec 18 01:31:10 2021 +0200
🔧 Warning for IGNORE_THERMOCOUPLE_ERRORS (#23312)
commit 1a8307b196ce5ed791b8f9bf8acfb50a797e45a9
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat Dec 18 17:38:29 2021 -0600
📝 Fix a config comment
commit 13a1c86ae832274026e8b3a4031bc28a6fca2db9
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Tue Dec 14 13:18:24 2021 +1300
✨ M115 flag EXTENDED_M20 (#22941)
commit 15656201d281842b9f9101133529a76738b76cdd
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Tue Dec 14 13:13:34 2021 +1300
✏️ Clean up duplicate defs (#23182)
commit f3e372cb4c849bbd77cec949f5fbd632bf84efed
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Tue Dec 14 07:11:52 2021 +0700
🩹 Init fan speed at boot (#23181)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit c781ecc437e27f5efd438a9f2d92bf8b7be3a299
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Dec 13 16:15:46 2021 -0600
🔧 Fix unknown board test
commit daa8fff6c630da27bed2df7bd30c38e7e359c0e8
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sun Dec 12 16:16:40 2021 -0600
🩹 SD abort requires open file
See #22566
commit d481bba3275bc9c7fb4a88fac3eb66727d73f504
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Sun Dec 12 11:06:45 2021 +1300
🐛 Fix MARLIN_F103Rx variant SCK / MOSI pins (#23282)
commit 32b08ae04cdeef3362a92ee9c1d56787b0792b4c
Author: Scott Alfter <scott@alfter.us>
Date: Wed Dec 8 23:18:04 2021 -0800
Fix Endstops::report_states (#23280)
Fix regression 4d45fdf0eb
commit f00a0356c7fd9708ebabd4e5a25df0a3d6dd35f6
Author: Scott Lahteine <github@thinkyhead.com>
Date: Wed Dec 8 18:36:08 2021 -0600
🎨 Misc. probe / endstop cleanup
commit 9871800874edf7e33233ba853735708f823e13a7
Author: Sola <42537573+solawc@users.noreply.github.com>
Date: Thu Dec 9 03:37:45 2021 +0800
🐛 Fix MKS LVGL UI retraction (#23267)
commit 39c2c038be51cd1bfc9cd963baf68307c28f542c
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Thu Dec 9 02:15:31 2021 +0700
🩹 Coerce pin_t in set_pwm_duty macros (#23273)
commit 285d6488a369bd189073fae1cdfea5818a5f2275
Author: Jason Smith <jason.inet@gmail.com>
Date: Wed Dec 8 11:10:37 2021 -0800
🐛 Fix ACTION_ITEM with nullptr (#23195)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit eecbd09a460d255594f418078ce5f96e9e688008
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Thu Dec 9 01:57:50 2021 +0700
🚸 Onboard SD for SKR 2.0 / SKR PRO (#23274)
commit 8d4e4ac11530ba2576244f69802e35485ed05863
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Wed Dec 8 12:40:23 2021 -0600
🎨 Rename MAX31865 elements
commit b77a5d4c8d9b90bdd870ed9590e3f2538f34b8c6
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Dec 6 20:18:50 2021 -0600
✏️ MAX31856 => MAX31865
commit c3b8b3e7e6b3571d3d01f2bb1e4298c25d71d051
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Mon Dec 6 15:52:18 2021 -0600
🩹 Fix non-PWM cutter compile (#23169)
commit 7123b15801779efb2dfb9bbc932b7d665a708868
Author: Stuart Pittaway <1201909+stuartpittaway@users.noreply.github.com>
Date: Mon Dec 6 21:40:18 2021 +0000
🐛 Fix TWIBus Wire.begin call (#23183)
commit 8a2f13d657cb881b7e0365dd0a28b233125d433c
Author: Chris Pepper <p3p@p3psoft.co.uk>
Date: Sun Dec 5 22:18:02 2021 +0000
🐛 HAL_reboot for native HAL (#23246)
commit 251d9fc1d741132f3baa1a7c9c9ead25a65af3c7
Author: tommywienert <53783769+tommywienert@users.noreply.github.com>
Date: Sun Dec 5 23:16:23 2021 +0100
🐛 Fix env:chitu_f103 (#23225)
commit 5eeb9650b5bbaeb2a07436d0e9cc5036dc518723
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Mon Dec 6 10:42:56 2021 +1300
📌 More Longer3D LKx Pro serial tests (#23260)
commit c0addd1d33017e97117ffab1e3145a55750fd2c4
Author: Stuart Pittaway <1201909+stuartpittaway@users.noreply.github.com>
Date: Sat Dec 4 23:44:10 2021 +0000
✨ M3426 to read i2c MCP3426 ADC (#23184)
commit 05b57278d43fb1bcf7165dae88643dbac2ff7e8d
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Dec 4 17:17:10 2021 -0600
🔧 Cutter pins for SKR 2.0
commit aa3ec2fbfda25381eb4effb65471f206511a823d
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Sun Dec 5 05:14:19 2021 +0700
🚸 Park nozzle on "loud kill" (#23172)
commit 4468516aa29b1319e8d296880ebf395a2e7e1d09
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Sun Dec 5 11:10:29 2021 +1300
✨ BigTree SKR 2 with F429 (#23177)
commit 95d006b4061f15b8a7edfd62ad4760994b28610f
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Sat Dec 4 09:48:54 2021 +1300
🐛 Fix TIMER_TONE for ZM3E4 (#23212)
commit 5b057b4bcfeec871830bab9c6a15bf1e52e53c62
Author: Jiri Jirus <jiri.jirus@cloudaper.com>
Date: Tue Nov 30 21:46:48 2021 +0100
🩹 Assume 4K EEPROM for RUMBA32 BTT (#23205)
commit 77af48e5479eb0840977fc6ad16f1b8ad651efd4
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Nov 30 13:03:31 2021 -0600
🐛 Fix STM32 FastPWM
commit 0f7f709aad290285f10d6bed733f783dee6c324c
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Sat Nov 27 14:59:32 2021 -0800
✏️ Fix Unicode (#23186)
commit a8c0e11cb143cb40637349cccdcc89282382f3d7
Author: Jason Smith <jason.inet@gmail.com>
Date: Sat Nov 27 13:54:39 2021 -0800
🩹 Handle nullptr in CardReader::printLongPath (#23197)
commit 0556da85b0d1aa9dee1fa229296270468cb13180
Author: Anson Liu <ansonl@users.noreply.github.com>
Date: Sat Nov 27 17:58:05 2021 -0500
🩹 UM2 extruder cooling fan on PJ6 (#23194)
commit 93652e5c6fc4d4f141bdc524e01144ef7c6221dd
Author: George Fu <nailao_5918@163.com>
Date: Sun Nov 28 03:26:53 2021 +0800
✨ FYSETC Spider v2.2 (#23208)
commit f3fc1d15a3f7a77e36ce9e072c72bfae127f57d9
Author: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Date: Tue Nov 23 22:33:33 2021 +0100
🩹 Fix include path (#23150)
commit 3148060550eee847ec9d20eedf6bc890c9f4e12a
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Tue Nov 23 13:54:31 2021 -0800
📌 Biqu BX temporary framework workaround (#23131)
commit 5f08864d1fa8146bc909f3b79daa0bf026e94c6b
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Tue Nov 23 14:05:50 2021 -0600
🐛 Fix STM32 set_pwm_duty (#23125)
commit 184fc36a088204a1a6d98afbf3e05f24670e2e77
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Sun Nov 21 20:13:01 2021 +0100
🐛 Fix TFT backlight sleep/wake (#23153)
commit 281ed99868e2ad67be39858aac5ba6a6b46c6fd0
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Sat Nov 20 02:44:53 2021 +0100
⚡️ Reduce calls to set fan PWM (#23149)
commit 2cc4a1b3260e1a559ce91c707e1a7cdc5444ca94
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Wed Nov 17 13:01:44 2021 -0600
🎨 Misc formatting
commit c5bd08755cef48d8dc920053b68da1bbe01a56b0
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date: Thu Nov 18 01:35:28 2021 +0800
🐛 Init PROBE_ENABLE_PIN (#23133)
commit 99f58f63f264a9968d5b98ad2e1c6e7f2411d57e
Author: luzpaz <luzpaz@users.noreply.github.com>
Date: Wed Nov 17 12:09:01 2021 -0500
🎨 Fix misspelling (#23137)
commit c2a674d2c114eee94debf9f649e66cbdb06afdbb
Author: espr14 <espr14@gmail.com>
Date: Wed Nov 17 18:07:11 2021 +0100
🏗️ Planner::busy() (#23145)
commit feffc1986744cdf10f9e8ca474f4a1aa4ca10dfe
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue Nov 16 14:06:36 2021 -0600
🐛 Fix fast PWM WGM code
Followup to #23102
commit f637e1c5017540b32ccf43bf32269905abdd51ee
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue Nov 16 12:49:25 2021 -0600
🔨 Bring Makefile up to date
commit 78240a279b5eaa6900d381616e5e252513e82b67
Author: EvilGremlin <22657714+EvilGremlin@users.noreply.github.com>
Date: Tue Nov 16 19:32:43 2021 +0300
🔨 Ignore sim flashdrive file (#23129)
commit 656034d2d9d94208611ee6b684bdfb1441291249
Author: Luc Van Daele <lvd@sound-silence.com>
Date: Tue Nov 16 16:24:53 2021 +0100
🐛 Fix G33, Delta radii, reachable (#22795)
commit 39a81d167ee6e41aa055ceb7c7eceb919573aa61
Author: Mikhail Basov <github@basov.net>
Date: Mon Nov 15 07:46:34 2021 +0300
🚸 LCD_SHOW_E_TOTAL for TFT_COLOR_UI (#23127)
commit cb1570d162680dd0de9e23a1f4ed9fb40b56b72b
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sun Nov 14 17:19:57 2021 -0600
🐛 Fix SENSORLESS_HOMING for 6-axis
commit 8cb646cc20576ed6cf4462e9ac9125f396a38bd9
Author: EvilGremlin <22657714+EvilGremlin@users.noreply.github.com>
Date: Mon Nov 15 00:15:07 2021 +0300
🚸 Simplify touchscreen calibration for SimUI (#23124)
commit 3cccb21dc9673d641a5b490b3d6a60466f5fd12f
Author: Miguel Risco-Castillo <mriscoc@users.noreply.github.com>
Date: Wed Nov 10 11:55:20 2021 -0500
🚸 Fix up E3V2 Enhanced (#23100)
commit 7f4a49cc446addad07c5b1c06066e821f1e4b16c
Author: Scott Lahteine <github@thinkyhead.com>
Date: Fri Oct 22 13:21:26 2021 -0500
🎨 Misc. issue review patches
commit e0c439fe911320d08229ebc24eee2a32cd1ee986
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Sun Nov 14 05:55:31 2021 -0600
⚡️ Controller Fan software PWM (etc.) (#23102)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 49e233e06f8be0d408a3576d77fa1bf5c27ff995
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Fri Nov 12 21:26:19 2021 +0100
🎨 MPX ARM Mini pins cleanup (#23113)
commit b662dd1f9221bc1a489dfb84737a49564f72858f
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Fri Nov 12 12:14:28 2021 -0600
🐛 [LCP1768] Init PWM in set_pwm_duty (#23110)
commit 700cae43abd0108aae612513509dafccba493b61
Author: Skruppy <skruppy@onmars.eu>
Date: Fri Nov 12 15:57:24 2021 +0100
🩹 Fix RGB case light compile (#23108)
commit 1c74c6e7ac943078835dca58e295b2b2fe57f787
Author: George Fu <nailao_5918@163.com>
Date: Wed Nov 10 23:58:20 2021 +0800
🐛 Fix FYSETC Cheetah 2.0 pins for production (#23104)
commit 757a9477db64086bebe2f1fa293ae3ec557b7a2f
Author: Minims <github@minims.fr>
Date: Sun Oct 10 01:10:21 2021 +0200
🩹 Adjust GTR 1.0 ST7920 display delay (#22904)
commit 59d43408f6e2fc33db4efb17dac54b6ebbed4547
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat Dec 25 00:57:30 2021 -0600
fix breaks in F() resolution
commit 1d8941d008cbc8dfacd35db140c1e87fc938ee58
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Oct 5 21:35:31 2021 -0500
🔨 Port libsdl2_net required for macOS simulator
commit 17f853d99ceccd06103cb404507b7ed171c306cf
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Tue Nov 9 08:30:02 2021 -0800
⚡️ BTT002 (STM32F407VET6) variant, MK3_FAN_PINS flag (#23093)
commit 6f9f25dbb29edbe5383f2f22a36d204484b19aa8
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sun Nov 7 01:11:51 2021 -0600
🎨 Misc. code cleanup
commit 0273a6858733d22647583d52df309fe05efd7d9e
Author: VragVideo <91742261+VragVideo@users.noreply.github.com>
Date: Sun Oct 3 06:12:51 2021 +0300
✨ WYH L12864 LCD (Alfawise Ex8) (#22863)
commit 58a26fcaaca2251a6098baad21236b0581f874a3
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Sat Nov 6 23:09:15 2021 -0700
🚸 Indicate Preheating for probe / leveling (#23088)
commit 489aca03ff1f6859ebcc52f0e6af2e3cb4f0c056
Author: Evgeniy Zhabotinskiy <evg-zhabotinsky@users.noreply.github.com>
Date: Sun Nov 7 07:16:18 2021 +0300
🩹 Fix M503 report (#23084)
commit f32e19e1c64b3e495d18707ae571e81efaac2358
Author: Jin <3448324+jinhong-@users.noreply.github.com>
Date: Sun Nov 7 11:53:36 2021 +0800
🍻 Preliminary fix for Max31865 SPI (#22682)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 57bd04b6ce2a36526717bf2e6942c14d81be44ac
Author: dwzg <50058606+dwzg@users.noreply.github.com>
Date: Sun Nov 7 04:48:00 2021 +0100
🐛 Fix JyersUI scrolling filename, etc. (#23082)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
commit 396df93220f037f70035e0e0c08afef436538d4d
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Sun Nov 7 15:27:53 2021 +1300
🐛 Fix DGUS Reloaded status message (#23090)
commit 9b76b58b791502cba0d6617042c37180851fd36f
Author: Scott Lahteine <github@thinkyhead.com>
Date: Thu Nov 4 12:18:23 2021 -0500
🍻 Get/clear reset source earlier
Followup to #23075
commit 9fffed7160ad791e9d81d66ff7d0c0d3e085586d
Author: Skruppy <skruppy@onmars.eu>
Date: Thu Nov 4 18:11:57 2021 +0100
🐛 Prevent AVR watchdogpile (#23075)
commit fd136d5501c51acbbf174ddf2331e747a80e2374
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Thu Nov 4 18:04:04 2021 +0100
🐛 Fix TFT backlight [STM32] (#23062)
commit 89ec1c71f0f90ba926043ebdd8ace007b7912b58
Author: BigTreeTech <38851044+bigtreetech@users.noreply.github.com>
Date: Thu Nov 4 18:54:38 2021 +0800
🐛 Fix Octopus-Pro Max31865 / SPI (#23072)
commit fc2020c6ecc7d731448509012a41d6ff499419bd
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Thu Nov 4 17:28:42 2021 +0700
🔨 Fix IntelliSense / PIO conflicts (#23058)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
commit f97635de364a27ddf8effd06ce0f18ceae5cf4f1
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Thu Nov 4 14:04:06 2021 +1300
📌 'STOP' auto-assign, some Chitu V9 pins (#22889)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
commit a0a57406a2e266bfc20e8e0d8a834cca3ef67367
Author: Scott Lahteine <github@thinkyhead.com>
Date: Wed Nov 3 07:06:31 2021 -0500
🔨 Script 'mfprep' finds pending commits
commit 5efef86cfa3ce88224edb68b2aa502dbf8939264
Author: Scott Lahteine <github@thinkyhead.com>
Date: Wed Nov 3 07:02:21 2021 -0500
🔨 Update git helper scripts
commit 20c747753db6657a505b50db302f7ec9fd3a6e5d
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Nov 2 01:28:00 2021 -0500
🔨 Support ABM in mf scripts
commit 08a9c6158798a59bd6af09b68144041fdc967d4b
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Mon Nov 1 23:15:29 2021 -0700
📌 Default NeoPixel pin for MKS Robin E3/E3D (#23060)
commit 0d91b07797c0d248eab25a64351db959a866bdc7
Author: Andrei M <22990561+andrei-moraru@users.noreply.github.com>
Date: Tue Nov 2 01:47:16 2021 -0400
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit b033da1782579d27ed05d9acbf0b2ccb433bdbb8
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Mon Nov 1 22:43:40 2021 -0700
🔧 Endstop / DIAG homing conflict warning (#23050)
commit 4dcd872be54d913d26c95666a74a67efd59a0519
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Mon Nov 1 21:23:54 2021 -0700
✨ Allow Low EJERK with LA, optional (#23054)
commit 7e9e2a74358c6033577fc31f3a16af57214e4f3a
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Mon Nov 1 20:23:24 2021 -0700
✨ Artillery Ruby (STM32F401RCT6) (#23029)
commit 0b841941276b246c06b52f65e5e45199d4792785
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date: Mon Nov 1 23:03:50 2021 +0000
🚸 More flexible Probe Temperature Compensation (#23033)
commit efd9329c813f47d7434f2c7acbb09bbce161a735
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Thu Jul 8 01:17:16 2021 -0500
📝 Tweak EXP comments
commit 5cbb820e2984d052c7ca412e06035206e5892790
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Oct 30 23:43:19 2021 -0500
🔨 Help for GDB remote debugging
commit 5a0166489e7d4ec6ce70fc20070f667fd00bccec
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Oct 30 22:43:02 2021 -0500
🩹 Fix linker error (transfer_port_index)
commit 692c9a6312785c728a9df474826acc0aa602771a
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Oct 30 04:16:37 2021 -0500
💚 Update Ender-3 V2 config path
MarlinFirmware/Configurations#600
commit 545d14f9a54f9689f4ef258999cab3222275980b
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Oct 30 01:39:33 2021 -0500
🎨 Adjust Ender-3 V2 DWIN options
commit 7b9e01eb2bd03564ad667746637d8f33899ad5b5
Author: aalku <aalku7@gmail.com>
Date: Sat Oct 30 07:17:20 2021 +0200
✨ Shutdown Host Action (#22908)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 8562f0ec44df99928bca503e77ccc500b8ec7654
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Fri Oct 29 20:46:55 2021 -0500
✨ "Rutilea" ESP32 board (#22880)
commit 6f59d8171f701cbeacf687937de1b0d6a68f6711
Author: Scott Lahteine <github@thinkyhead.com>
Date: Fri Oct 29 20:42:52 2021 -0500
🔧 Configuration version 02000903
commit d29a9014f2a4e496215a7b0503208b44a34915fb
Author: Scott Lahteine <github@thinkyhead.com>
Date: Wed Oct 27 21:36:06 2021 -0500
🎨 Standard 'cooldown' method
commit 205d867e4bfa1c100ae69670c0a1a820cb8697a0
Author: Scott Lahteine <github@thinkyhead.com>
Date: Wed Oct 27 20:01:44 2021 -0500
🎨 Standard material presets behavior
commit 84f9490149069a62c056cad9cb83ee7f2b4ee422
Author: Scott Lahteine <github@thinkyhead.com>
Date: Wed Oct 27 21:15:58 2021 -0500
🎨 Define HAS_PREHEAT conditional
commit 1fd42584230f1d45cba2cdb33c2618d42bf2d923
Author: tome9111991 <57866234+tome9111991@users.noreply.github.com>
Date: Sat Oct 30 00:49:12 2021 +0200
🐛 Fix E3V2 (CrealityUI) Tune/Prepare > Zoffset (#23040)
commit e8a55972a7eab13c231733676df8c9e306af4d12
Author: Scott Lahteine <github@thinkyhead.com>
Date: Thu Oct 28 19:22:35 2021 -0500
🐛 Fix EZBoard V2 board name
commit aef413202e69ddbed26bb155041a97abb0dada2e
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Thu Oct 28 03:26:05 2021 -0700
🐛 Fix MKS Robin E3/E3D Z Stop/Probe pins (#23034)
commit cbc7dadf42fc1cc56418caeb7ccba9491175f1ad
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Oct 26 21:54:43 2021 -0500
🎨 Apply HAS_MULTI_HOTEND conditional
commit c508ecc414a5876e6dadfe4ade926bc5b8bc25c3
Author: Zlopi <zlopi.ru@gmail.com>
Date: Wed Oct 27 23:10:46 2021 +0300
🚸 Scroll long filename on MKS TFT (#23031)
commit 384a31765f9080336d90a5404787bf1895dea2e9
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Thu Oct 28 09:06:06 2021 +1300
🩹 Retain LCD pins with motor expansion (#23024)
commit 0f2c4fc40ba87ffb5e345d7e8a16b5714b9a65bd
Author: somehibs <hibs@circuitco.de>
Date: Wed Oct 27 21:00:02 2021 +0100
🐛 Fix serial PORT_RESTORE (and BUFFER_MONITORING) (#23022)
commit 66a274452c20c9cab608e44a61663cd5a76cf9d6
Author: tome9111991 <57866234+tome9111991@users.noreply.github.com>
Date: Wed Oct 27 21:58:32 2021 +0200
🐛 Fix E3V2 (CrealityUI) position display (#23023)
Followup to #23005, #22778
commit 12f8168d1eba025ceb7762f49fc903cb123a8b3b
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Oct 26 19:36:16 2021 -0500
🚸 Tweaks to UBL G29 Q
commit 2142e1dae493502adb1a26c9f81c2e6d43b0e02a
Author: woisy00 <spam@bergermeier.info>
Date: Wed Oct 27 01:05:34 2021 +0200
🐛 Fix AUTOTEMP bug (thermal runaway) (#23025)
Regression from 9823a37
commit 8d21ea55a2e67712ca968807d9c0a86afa750373
Author: tombrazier <68918209+tombrazier@users.noreply.github.com>
Date: Mon Oct 25 06:33:40 2021 +0100
🐛 Add USE_TEMP_EXT_COMPENSATION options (#23007)
commit a0da7e8a1fc1962fa2abf18db627e1985d06b18b
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sun Oct 24 23:33:27 2021 -0500
🔧 Fewer alerts about Z_SAFE_HOMING
commit e2452d6c571db0875cc3fe625a3e68a6e1c75e56
Author: tome9111991 <57866234+tome9111991@users.noreply.github.com>
Date: Fri Oct 22 18:16:07 2021 +0200
🐛 Fix SHOW_REMAINING_TIME option for JyersUI (#22999)
commit 5173a3140da364d1645743cb0f2f0324245da5ea
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Fri Oct 22 08:52:31 2021 -0700
✨ BigTreeTech TFT35 SPI V1.0 (#22986)
commit e44f2b7d2db248c8ddef3574979a1a485137a99d
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Tue Oct 19 06:05:23 2021 -0500
🩹 Fix pragma ignored for older GCC (#22978)
commit ed78f7f4e65b632fa986400c65796233e1a5038e
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue Oct 19 05:59:48 2021 -0500
🎨 Refactor MOSFET pins layout (#22983)
commit aa198e41dd01e7c52871611c880cae590aa8cb32
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Oct 19 05:52:41 2021 -0500
🎨 Pragma GCC cleanup
commit 18b38fb58a348112ebfd91e9f6f92c64ad4dfa49
Author: Jason Smith <jason.inet@gmail.com>
Date: Mon Oct 18 01:11:16 2021 -0700
🐛 Fix max chamber fan speed (#22977)
commit 5d79d8fad64a169351a36c5243911218e4ee6b7f
Author: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
Date: Mon Oct 18 00:57:54 2021 -0700
🐛 Fix I2C EEPROM SDA/SCL aliases with SKR Mini E3 V2 (#22955)
commit e7a746966d67d50fdeab67ce745a1524d34ccb59
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Mon Oct 18 20:54:20 2021 +1300
🐛 Fix MMU1 compile (#22965)
commit 555f35d46f1b0ae9e2105c23a5f37afe8336e4f4
Author: Mike La Spina <mike.laspina@shaw.ca>
Date: Mon Oct 18 02:40:47 2021 -0500
🎨 Suppress type warning (#22976)
commit de77dfcbbd392c47ed8ec1f711abefe6c10b30f0
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sun Oct 17 22:10:08 2021 -0500
🎨 Add MKS UI goto_previous_ui
commit af08f16efc8b31f2ae66672ac0df8dedbabdc163
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sun Oct 17 20:24:41 2021 -0500
🚸 Tweak MKS UI G-code console
commit 01a0f3a8cfc3ec1ae27e6959465fd275c4c895c7
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sun Oct 17 18:11:16 2021 -0500
🎨 Fix up MKS UI defines
commit f80bcdcc5cc03a0fdecdfe3c79f10c5a7436bf7d
Author: Scott Lahteine <github@thinkyhead.com>
Date: Fri Oct 15 00:24:08 2021 -0500
🎨 Refactor Host Actions as singleton
commit 1ead7ce68198d5888b6a19195602679adf0cf7ab
Author: ellensp <530024+ellensp@users.noreply.github.com>
Date: Fri Oct 15 14:38:03 2021 +1300
🔧 Add, update TFT sanity checks (#22928)
commit dffa56463e89504302b95a7a7e7af8016c713bc8
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date: Tue Oct 12 23:19:05 2021 -0400
⚡️ Formbot ST7920 delays, intentional X2 pins (#22915)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit ae98d2e5eae1d41e1004919643cb34dc517c84e9
Author: Dmytro <svetotled@gmail.com>
Date: Wed Oct 13 05:45:00 2021 +0300
🎨 Update MKS UI for no bed, extruder (#22938)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
commit 5b1ef638ee9630063de0cc096cd408c871e5b72f
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date: Tue Oct 12 19:40:56 2021 -0400
🐛 Fix IDEX + DISABLE_INACTIVE_EXTRUDER (#22925)
commit f3be03da20708c8dfc990e6e293c4e25a3605e52
Author: Stuart Pittaway <1201909+stuartpittaway@users.noreply.github.com>
Date: Mon Oct 11 23:42:29 2021 +0100
✨ M261 S I2C output format (#22890)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
commit 64128a5bcb46d9428ff9acc4f45fc79381c90322
Author: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Date: Sun Oct 10 01:05:24 2021 +0200
🐛 Queue string followup (#22900)
commit 0018c94a7992a6bd0e13219504e664dc4703687d
Author: Pyro-Fox <36782094+Pyro-Fox@users.noreply.github.com>
Date: Sat Oct 9 15:09:50 2021 -0700
🐛 LCD string followup (#22892)
commit d48cb1153785178fba59c0f11da75720585baafb
Author: Scott Lahteine <github@thinkyhead.com>
Date: Tue Oct 5 21:19:28 2021 -0500
🐛 Followup to F() in config_line
Followup to 1dafd1887e
commit d9f7de7a24071fecb9bcae3400e3b4ec56c68a8d
Author: Scott Lahteine <github@thinkyhead.com>
Date: Mon Oct 4 19:50:14 2021 -0500
🐛 ExtUI F() followups
Followup to 12b5d997a2
commit 3d102a77ca475c2dc6461152ecc445247b9bfd26
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue Sep 28 20:15:52 2021 -0500
🎨 Apply F() to kill / sendinfoscreen
commit 492d70424d3819762ece7ecb4913e94e3cebf232
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Tue Sep 28 19:28:29 2021 -0500
🎨 Apply F() to MKS UI errors, assets
commit 24dbeceb45a72c0b96d42e46ba750f41ac1dd4e2
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Sep 27 13:46:42 2021 -0500
🎨 Apply F() to various reports
commit cabd538fdd03bec0b293cb290bbc3dc123da780a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Sep 27 13:40:01 2021 -0500
🎨 Apply F() to G-code report header
commit 9cf1c3cf051f7fa946098e7a7873aa0a8797d62a
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat Sep 25 23:52:41 2021 -0500
🎨 Apply F() to UTF-8/MMU2 string put
commit c3ae221a109cb99bde634899f5b1b0ff690f29ab
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Sat Sep 25 22:11:48 2021 -0500
🎨 Apply F() to some ExtUI functions
commit 7626d859a65417f03494c1e99d3d29e79b84fd3d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Sep 27 11:55:08 2021 -0500
🎨 Apply F() to Host Actions strings
commit 360311f2320d6e5a94d17c6ff830146675be732e
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Sep 25 17:05:11 2021 -0500
🎨 Apply F() to status message
commit 433eedd50fb0b1da04a0153de483088c8de9295d
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Sep 27 11:03:07 2021 -0500
🎨 Apply F() to serial macros
commit 46c53f67307f78fc2a42a926a0b8f1f6db2d7ea9
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Sep 25 21:11:31 2021 -0500
🎨 Apply F() to G-code suite and queue
commit 2b9ae0cc33a1996cb6dd1092743d4a3123c1d4c1
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Sep 25 18:43:52 2021 -0500
🎨 Apply F() to G-code subcommands
commit 433a27e475584e73195a89d59ed5ecc20303d53d
Author: Scott Lahteine <github@thinkyhead.com>
Date: Sat Sep 25 18:22:37 2021 -0500
🎨 Update F string declarations
commit 1de265ea5dd09ac4371add0b1bb9c1b595a3c385
Author: Scott Lahteine <thinkyhead@users.noreply.github.com>
Date: Mon Oct 4 00:24:41 2021 -0500
🎨 Axis name string interpolation, with examples (#22879)
commit ecb08b15bed770972a263abb600207a0db8791d1
Merge: 798d12c2af 854ce63358
Author: Sergey <sergey@terentiev.me>
Date: Wed Dec 22 11:58:28 2021 +0300
Merge branch '2.0.x' into vanilla_fb_2.0.x
commit 854ce63358f409340863024edd38fb7d1499fd91
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Sun Dec 19 05:33:21 2021 +0700
🐛 Fix loud_kill heater disable (#23314)
commit 170f77fada009bcd77b02edf7b5d55d5173b00e9
Author: lukrow80 <64228214+lukrow80@users.noreply.github.com>
Date: Tue Nov 23 22:30:13 2021 +0100
🐛 Fix homing current for extra axes (#23152)
Followup to #19112
commit 72b99bf1ba24cb9124668b958039b32a164c68cd
Author: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Date: Sat Oct 9 19:13:19 2021 -0400
🐛 Fix IDEX Duplication Mode Positioning (#22914)
Fixing #22538
commit 1a8583f4fce492240db5d890825b8edd8217025f
Author: Robby Candra <robbycandra.mail@gmail.com>
Date: Wed Nov 24 04:19:32 2021 +0700
🐛 Fix serial_data_available (#23160)
2 years ago
|
|
|
#define STEP_TIMER 1
|
|
|
|
|
#define TEMP_TIMER 3
|
|
|
|
|
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
//
|
|
|
|
|
// Limit Switches
|
|
|
|
|
//
|
|
|
|
|
#define X_STOP_PIN PB4
|
|
|
|
|
#define Y_STOP_PIN PA15
|
|
|
|
|
#define Z_STOP_PIN PB5
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Steppers
|
|
|
|
|
//
|
|
|
|
|
// X & Y enable are the same
|
|
|
|
|
#define X_STEP_PIN PB14
|
|
|
|
|
#define X_DIR_PIN PB15
|
|
|
|
|
#define X_ENABLE_PIN PA8
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
#define Y_STEP_PIN PB12
|
|
|
|
|
#define Y_DIR_PIN PB13
|
|
|
|
|
#define Y_ENABLE_PIN PA8
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
#define Z_STEP_PIN PB10
|
|
|
|
|
#define Z_DIR_PIN PB2
|
|
|
|
|
#define Z_ENABLE_PIN PB11
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
#define E0_STEP_PIN PB0
|
|
|
|
|
#define E0_DIR_PIN PC13
|
|
|
|
|
#define E0_ENABLE_PIN PB1
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Temperature Sensors
|
|
|
|
|
//
|
|
|
|
|
#define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor)
|
|
|
|
|
#define TEMP_BED_PIN PA1 // Analog Input (BED thermistor)
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Heaters / Fans
|
|
|
|
|
//
|
|
|
|
|
#define HEATER_0_PIN PB6 // HOTEND0 MOSFET
|
|
|
|
|
#define HEATER_BED_PIN PB7 // BED MOSFET
|
[2.0.x] Multiple updates to STM32F1 HAL (#8733)
* STM32F1 HAL
Adding files for STM32F1 HAL based on libmaple/stm32duino core.
Current persistent_store uses cardreader changes to be sent in separate
commit, but could be changed to use i2c eeprom.
There is another persistent_store implementation that uses the MCU flash memory
to emulate eeprom
Adding readme with some information about the stm32 HAL.
* Switch to Timer4 to avoid a hard reset on STM32F103C6 boards
On bluepill STM32F103C6 boards, using Timer5 results in a error() vector call. Switch to 4 since these are both general purpose, 16 bit timers.
* Add support for EEPROM emulation using Flash
Some low end machines doe not have EEPROM support. Simulate it using the last two pages of flash. Flash does not allow rewrite between erases, so skip writing the working version if that's enabled.
* Basic Pins for a malyan M200
This is a work in progress to go hand in hand with the STM32 work.
* Add support for ADC with DMA. This work has exposed a problem with the pin enumerations in STM boards vs what marlin expects (i.e, try defining PA0 as a temp pin). The hack can be removed with we go to fastio completely. To see this work, set something in adc_pins to a value like PA0 and connect your pullup resistor'd thermistor.
* Missing file - change HAL_adc_init to actually do something
We have an actual ADC init function now.
* Remove pinmode hack
Remove the pin mode hack that I was using to init PA0.
Updated Readme.md
* Several changes to timers and GPIO
Faster GPIO, and faster timer functions by accesing registers and
libmaple.
Still more changes pending for the Timer's code to skip using the
HardwareTimer class altogether.
Switch all enums to be within #defines
This change allows a user to have, for instance, TEMP_4 and TEMP_BED definied but nothing else. The enums which are not defined move "out", allowing the first ones to take the slots in the enum, and since the array is sized on ADC_PIN_COUNT, we always have the right size data and in order.
* Update Malyan M200 pins
Update Malyan M200 pins with correct fan values.
* Test all pins on actual hardware, update definitions
Some of the pin definitions were from knowlege base/pdfs. Now they've been tested against actual hardware. This should be very close to final.
* Update HAL_timers_Stm32f1.cpp
* Add sample configurations for Malyan M200
Add sample configuration for Malyan M200 without bed leveling, and move fan to auto cool E0 since this printer by default has only one fan.
Choose the timer based on MCU defintion. Timer5 is not valid on C8/CB class boards, so use Timer4 for the step timer.
readme.md update
* Updates to timers, and some stm32 boards definitiions
* Correct pin toggle macro.
* Remove duplicated Malyan M200 entry from pins.h
* Update configuration_store.cpp
* Formatting, indentation
* Formatting in HAL_Stm32f1.cpp
7 years ago
|
|
|
|
|
|
|
|
#define MALYAN_FAN1_PIN PB8 // FAN1 header on board - PRINT FAN
|
|
|
|
|
#define MALYAN_FAN2_PIN PB3 // FAN2 header on board - CONTROLLER FAN
|
|
|
|
|
|
|
|
|
|
#define FAN1_PIN MALYAN_FAN2_PIN
|
