You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
88 lines
2.5 KiB
88 lines
2.5 KiB
/**
|
|
* SAV MkI pin assignments (AT90USB1286)
|
|
* Requires the Teensyduino software with Teensy++ 2.0 selected in Arduino IDE!
|
|
* http://www.pjrc.com/teensy/teensyduino.html
|
|
* RepRap Clone Wars project board.
|
|
*/
|
|
|
|
#ifndef __AVR_AT90USB1286__
|
|
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
|
|
#define AT90USB 1286 // Disable MarlinSerial etc.
|
|
|
|
#define LARGE_FLASH true
|
|
|
|
#define X_STEP_PIN 0
|
|
#define X_DIR_PIN 1
|
|
#define X_ENABLE_PIN 39
|
|
|
|
#define Y_STEP_PIN 2
|
|
#define Y_DIR_PIN 3
|
|
#define Y_ENABLE_PIN 38
|
|
|
|
#define Z_STEP_PIN 4
|
|
#define Z_DIR_PIN 5
|
|
#define Z_ENABLE_PIN 23
|
|
|
|
#define E0_STEP_PIN 6
|
|
#define E0_DIR_PIN 7
|
|
#define E0_ENABLE_PIN 19
|
|
|
|
#define HEATER_0_PIN 21 // Extruder
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 20 // Bed
|
|
#define FAN_PIN 16 // Fan -- from Teensyduino environment.
|
|
// For the fan and Teensyduino uses a different pin mapping.
|
|
|
|
#define X_STOP_PIN 13
|
|
#define Y_STOP_PIN 14
|
|
#define Z_STOP_PIN 15
|
|
//#define Z_STOP_PIN 36 // For inductive sensor.
|
|
|
|
#define TEMP_0_PIN 7 // Extruder / Analog pin numbering
|
|
#define TEMP_BED_PIN 6 // Bed / Analog pin numbering
|
|
|
|
#define TEMP_1_PIN -1
|
|
#define TEMP_2_PIN -1
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 20 // PB0 - 8 in marlin env.
|
|
#define LED_PIN -1
|
|
#define PS_ON_PIN -1
|
|
#define ALARM_PIN -1
|
|
#define SDCARDDETECT -1
|
|
|
|
#ifndef SDSUPPORT
|
|
// these pins are defined in the SD library if building with SD support
|
|
#define SCK_PIN 9
|
|
#define MISO_PIN 11
|
|
#define MOSI_PIN 10
|
|
#endif
|
|
|
|
#define BEEPER -1
|
|
#define LCD_PINS_RS -1
|
|
#define LCD_PINS_ENABLE -1
|
|
#define LCD_PINS_D4 -1
|
|
#define LCD_PINS_D5 -1
|
|
#define LCD_PINS_D6 -1
|
|
#define LCD_PINS_D7 -1
|
|
|
|
#ifdef SAV_3DLCD
|
|
// For LCD SHIFT register LCD
|
|
#define SR_DATA_PIN 1
|
|
#define SR_CLK_PIN 0
|
|
|
|
#define BTN_EN1 41
|
|
#define BTN_EN2 40
|
|
#define BTN_ENC 12
|
|
|
|
#define KILL_PIN 42 // A2 = 42 - teensy = 40
|
|
#define HOME_PIN 44 // A4 = marlin 44 - teensy = 42
|
|
|
|
#ifdef NUM_SERVOS
|
|
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp)
|
|
#endif
|
|
|
|
#endif // SAV_3DLCD
|
|
|