Marlin_FB4S/Marlin/language.h


								#ifndef LANGUAGE_H

								#define LANGUAGE_H


								// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES

								//

								//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"

								//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS


								// Languages

								// 1  English

								// 2  Polish

								// 3  French

								// 4  German

								// 5  Spanish

								// 6  Russian

								// 7  Italian

								// 8  Portuguese

								// 9  Finnish


								#ifndef LANGUAGE_CHOICE

								#define LANGUAGE_CHOICE 1  // Pick your language from the list above

								#endif


								#define PROTOCOL_VERSION "1.0"


								#if MOTHERBOARD == 7 || MOTHERBOARD == 71 || MOTHERBOARD == 72

									#define MACHINE_NAME "Ultimaker"

									#define FIRMWARE_URL "http://firmware.ultimaker.com"

								#elif MOTHERBOARD == 80

									#define MACHINE_NAME "Rumba"

									#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"

								#elif MOTHERBOARD == 77

									#define MACHINE_NAME "3Drag"

									#define FIRMWARE_URL "http://3dprint.elettronicain.it/"

								#else

									#ifdef CUSTOM_MENDEL_NAME

										#define MACHINE_NAME CUSTOM_MENDEL_NAME

									#else

										#define MACHINE_NAME "Mendel"

									#endif


									#define FIRMWARE_URL "http://www.mendel-parts.com"

								#endif


								#ifndef MACHINE_UUID

								   #define MACHINE_UUID "00000000-0000-0000-0000-000000000000"

								#endif


								#define STRINGIFY_(n) #n

								#define STRINGIFY(n) STRINGIFY_(n)


								#if LANGUAGE_CHOICE == 1


								// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME " Ready."

									#define MSG_SD_INSERTED "Card inserted"

									#define MSG_SD_REMOVED "Card removed"

									#define MSG_MAIN "Main"

									#define MSG_AUTOSTART "Autostart"

									#define MSG_DISABLE_STEPPERS "Disable Steppers"

									#define MSG_AUTO_HOME "Auto Home"

									#define MSG_SET_ORIGIN "Set Origin"

									#define MSG_PREHEAT_PLA "Preheat PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA Conf"

									#define MSG_PREHEAT_ABS "Preheat ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS Conf"

									#define MSG_COOLDOWN "Cooldown"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE "Extrude"

									#define MSG_RETRACT "Retract"

									#define MSG_MOVE_AXIS "Move Axis"

									#define MSG_SPEED "Speed"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Bed"

									#define MSG_FAN_SPEED "Fan speed"

									#define MSG_FLOW "Flow"

									#define MSG_CONTROL "Control"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Accel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract"

									#define MSG_XSTEPS "Xsteps/mm"

									#define MSG_YSTEPS "Ysteps/mm"

									#define MSG_ZSTEPS "Zsteps/mm"

									#define MSG_ESTEPS "Esteps/mm"

									#define MSG_RECTRACT "Rectract"

									#define MSG_TEMPERATURE "Temperature"

									#define MSG_MOTION "Motion"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM "Store memory"

									#define MSG_LOAD_EPROM "Load memory"

									#define MSG_RESTORE_FAILSAFE "Restore Failsafe"

									#define MSG_REFRESH "Refresh"

									#define MSG_WATCH "Info screen"

									#define MSG_PREPARE "Prepare"

									#define MSG_TUNE "Tune"

									#define MSG_PAUSE_PRINT "Pause Print"

									#define MSG_RESUME_PRINT "Resume Print"

									#define MSG_STOP_PRINT "Stop Print"

									#define MSG_CARD_MENU "Print from SD"

									#define MSG_NO_CARD "No Card"

									#define MSG_DWELL "Sleep..."

									#define MSG_USERWAIT "Wait for user..."

									#define MSG_RESUMING "Resuming print"

									#define MSG_NO_MOVE "No move."

									#define MSG_KILLED "KILLED. "

									#define MSG_STOPPED "STOPPED. "

									#define MSG_CONTROL_RETRACT  "Retract mm"

									#define MSG_CONTROL_RETRACTF "Retract  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"

								// Serial Console Messages


									#define MSG_Enqueing "enqueing \""

									#define MSG_POWERUP "PowerUp"

									#define MSG_EXTERNAL_RESET " External Reset"

									#define MSG_BROWNOUT_RESET " Brown out Reset"

									#define MSG_WATCHDOG_RESET " Watchdog Reset"

									#define MSG_SOFTWARE_RESET " Software Reset"

									#define MSG_MARLIN "Marlin "

									#define MSG_AUTHOR " | Author: "

									#define MSG_CONFIGURATION_VER " Last Updated: "

									#define MSG_FREE_MEMORY " Free Memory: "

									#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Done saving file."

									#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "

									#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "

									#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "

									#define MSG_FILE_PRINTED "Done printing file"

									#define MSG_BEGIN_FILE_LIST "Begin file list"

									#define MSG_END_FILE_LIST "End file list"

									#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "

									#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "

									#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "

									#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"

									#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "

									#define MSG_HEATING "Heating..."

									#define MSG_HEATING_COMPLETE "Heating done."

									#define MSG_BED_HEATING "Bed Heating."

									#define MSG_BED_DONE "Bed done."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Count X: "

									#define MSG_ERR_KILLED "Printer halted. kill() called!"

									#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"

									#define MSG_RESEND "Resend: "

									#define MSG_UNKNOWN_COMMAND "Unknown command: \""

									#define MSG_ACTIVE_EXTRUDER "Active Extruder: "

									#define MSG_INVALID_EXTRUDER "Invalid extruder"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Reporting endstop status"

									#define MSG_ENDSTOP_HIT "TRIGGERED"

									#define MSG_ENDSTOP_OPEN "open"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"

									#define MSG_SD_INIT_FAIL "SD init fail"

									#define MSG_SD_VOL_INIT_FAIL "volume.init failed"

									#define MSG_SD_OPENROOT_FAIL "openRoot failed"

									#define MSG_SD_CARD_OK "SD card ok"

									#define MSG_SD_WORKDIR_FAIL "workDir open failed"

									#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "

									#define MSG_SD_FILE_OPENED "File opened: "

									#define MSG_SD_SIZE " Size: "

									#define MSG_SD_FILE_SELECTED "File selected"

									#define MSG_SD_WRITE_TO_FILE "Writing to file: "

									#define MSG_SD_PRINTING_BYTE "SD printing byte "

									#define MSG_SD_NOT_PRINTING "Not SD printing"

									#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"

									#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "


									#define MSG_STEPPER_TOO_HIGH "Steprate too high: "

									#define MSG_ENDSTOPS_HIT "endstops hit: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"

									#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"


								#endif


								#if LANGUAGE_CHOICE == 2


								// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME " Gotowe."

									#define MSG_SD_INSERTED "Karta wlozona"

									#define MSG_SD_REMOVED "Karta usunieta"

									#define MSG_MAIN "Main"

									#define MSG_AUTOSTART "Autostart"

									#define MSG_DISABLE_STEPPERS "Wylacz silniki"

									#define MSG_AUTO_HOME "Auto. poz. zerowa"

									#define MSG_SET_ORIGIN "Ustaw punkt zerowy"

									#define MSG_PREHEAT_PLA "Rozgrzej PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Ustawienia roz. PLA"

									#define MSG_PREHEAT_ABS "Rozgrzej ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Ustawienia roz. ABS"

									#define MSG_COOLDOWN "Chlodzenie"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE "Ekstruzja"

									#define MSG_RETRACT "Cofanie"

									#define MSG_MOVE_AXIS "Ruch osi"

									#define MSG_SPEED "Predkosc"

									#define MSG_NOZZLE "Dysza"

									#define MSG_NOZZLE1 "Dysza2"

									#define MSG_NOZZLE2 "Dysza3"

									#define MSG_BED "Loze"

									#define MSG_FAN_SPEED "Obroty wiatraka"

									#define MSG_FLOW "Przeplyw"

									#define MSG_CONTROL "Kontrola"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Mnoznik"

									#define MSG_AUTOTEMP "Auto. temp."

									#define MSG_ON "Wl. "

									#define MSG_OFF "Wyl."

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Acc"

									#define MSG_VXY_JERK "Zryw Vxy"

									#define MSG_VZ_JERK "Zryw Vz"

									#define MSG_VE_JERK "Zryw Ve"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "Vskok min"

									#define MSG_AMAX "Amax"

									#define MSG_A_RETRACT "A-wycofanie"

									#define MSG_XSTEPS "krokiX/mm"

									#define MSG_YSTEPS "krokiY/mm"

									#define MSG_ZSTEPS "krokiZ/mm"

									#define MSG_ESTEPS "krokiE/mm"

									#define MSG_RECTRACT "Wycofanie"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Ruch"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM "Zapisz w pamieci"

									#define MSG_LOAD_EPROM "Wczytaj z pamieci"

									#define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"

									#define MSG_REFRESH "\004Odswiez"

									#define MSG_WATCH "Obserwuj"

									#define MSG_PREPARE "Przygotuj"

									#define MSG_CONTROL "Kontroluj"

									#define MSG_TUNE "Strojenie"

									#define MSG_PAUSE_PRINT "Pauza"

									#define MSG_RESUME_PRINT "Wznowienie"

									#define MSG_STOP_PRINT "Stop"

									#define MSG_CARD_MENU "Menu SDCard"

									#define MSG_NO_CARD "Brak karty"

									#define MSG_DWELL "Uspij..."

									#define MSG_USERWAIT "Czekaj na uzytkownika..."

									#define MSG_RESUMING "Wznawiam drukowanie"

									#define MSG_NO_MOVE "Brak ruchu."

									#define MSG_PART_RELEASE "Czesciowe zwolnienie"

									#define MSG_KILLED "Ubity. "

									#define MSG_STOPPED "Zatrzymany. "

									#define MSG_STEPPER_RELEASED "Zwolniony."

									#define MSG_CONTROL_RETRACT  "Wycofaj mm"

									#define MSG_CONTROL_RETRACTF "Wycofaj  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Skok Z mm:"

									#define MSG_CONTROL_RETRACT_RECOVER "Cof. wycof. +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "Cof. wycof.  F"

									#define MSG_AUTORETRACT "Auto. wycofanie"

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing "Kolejkowanie \""

									#define MSG_POWERUP "Zasilanie wlaczone"

									#define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"

									#define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"

									#define MSG_WATCHDOG_RESET " Reset (watchdog)"

									#define MSG_SOFTWARE_RESET " Reset (programowy)"

									#define MSG_MARLIN "Marlin "

									#define MSG_AUTHOR " | Autor: "

									#define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "

									#define MSG_FREE_MEMORY " Wolna pamiec: "

									#define MSG_PLANNER_BUFFER_BYTES "  Bufor planisty krokow (w bajtach): "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Plik zapisany."

									#define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"

									#define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "

									#define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"

									#define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"

									#define MSG_BEGIN_FILE_LIST "Start listy plikow"

									#define MSG_END_FILE_LIST "Koniec listy plikow"

									#define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "

									#define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "

									#define MSG_M218_INVALID_EXTRUDER "M218 Niepoprawny ekstruder "

									#define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("

									#define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "

									#define MSG_HEATING "Nagrzewanie ekstrudera..."

									#define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."

									#define MSG_BED_HEATING "Nagrzewanie loza..."

									#define MSG_BED_DONE "Nagrzewanie loza zakonczone."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Liczenie X: "

									#define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"

									#define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"

									#define MSG_RESEND "Wyslij ponownie: "

									#define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""

									#define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "

									#define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"

									#define MSG_ENDSTOP_HIT "WYZWOLONY"

									#define MSG_ENDSTOP_OPEN "otwarty"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"

									#define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"

									#define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"

									#define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"

									#define MSG_SD_CARD_OK "Karta SD zainicjalizowana"

									#define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"

									#define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "

									#define MSG_SD_FILE_OPENED "Otwarto plik:"

									#define MSG_SD_SIZE " Rozmiar:"

									#define MSG_SD_FILE_SELECTED "Wybrano plik"

									#define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "

									#define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "

									#define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"

									#define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"

									#define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "


									#define MSG_STEPPER_TOO_HIGH "Za duza czestotliwosc krokow: "

									#define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"

									#define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"


								#endif


								#if LANGUAGE_CHOICE == 3


									#define WELCOME_MSG MACHINE_NAME " prete."

									#define MSG_SD_INSERTED "Carte inseree"

									#define MSG_SD_REMOVED "Carte retiree"

									#define MSG_MAIN "Menu principal"

									#define MSG_AUTOSTART "Demarrage auto"

									#define MSG_DISABLE_STEPPERS "Arreter moteurs"

									#define MSG_AUTO_HOME "Home auto."

									#define MSG_SET_ORIGIN "Regler origine"

									#define MSG_PREHEAT_PLA " Prechauffage PLA"

									#define MSG_PREHEAT_PLA_SETTINGS " Regl. prechauffe PLA"

									#define MSG_PREHEAT_ABS "Prechauffage ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Regl. prechauffe ABS"

									#define MSG_COOLDOWN "Refroidir"

									#define MSG_SWITCH_PS_ON "Allumer alim."

									#define MSG_SWITCH_PS_OFF "Eteindre alim."

									#define MSG_EXTRUDE "Extrusion"

									#define MSG_RETRACT "Retraction"

									#define MSG_PREHEAT_PLA "Prechauffage PLA"

									#define MSG_PREHEAT_ABS "Prechauffage ABS"

									#define MSG_MOVE_AXIS "Deplacer un axe"

									#define MSG_SPEED " Vitesse"

									#define MSG_NOZZLE "Buse"

									#define MSG_NOZZLE1 "Buse2"

									#define MSG_NOZZLE2 "Buse3"

									#define MSG_BED "Plateau"

									#define MSG_FAN_SPEED "Vitesse ventilateur"

									#define MSG_FLOW "Flux"

									#define MSG_CONTROL "Controler"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Facteur"

									#define MSG_AUTOTEMP "Temp. Auto."

									#define MSG_ON "Marche "

									#define MSG_OFF "Arret"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC "Accel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "Vdepl min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-retract"

									#define MSG_XSTEPS "Xpas/mm"

									#define MSG_YSTEPS "Ypas/mm"

									#define MSG_ZSTEPS "Zpas/mm"

									#define MSG_ESTEPS "Epas/mm"

									#define MSG_TEMPERATURE "Temperature"

									#define MSG_MOTION "Mouvement"

									#define MSG_CONTRAST "Contraste LCD"

									#define MSG_STORE_EPROM "Sauver config"

									#define MSG_LOAD_EPROM "Lire config"

									#define MSG_RESTORE_FAILSAFE "Restaurer defauts"

									#define MSG_REFRESH "Actualiser"

									#define MSG_WATCH "Surveiller"

									#define MSG_PREPARE "Preparer"

									#define MSG_TUNE "Regler"

									#define MSG_PAUSE_PRINT "Interrompre impr."

									#define MSG_RESUME_PRINT "Reprendre impr."

									#define MSG_STOP_PRINT "Arreter impr."

									#define MSG_CARD_MENU "Impr. depuis SD"

									#define MSG_NO_CARD "Pas de carte"

									#define MSG_DWELL "Repos..."

									#define MSG_USERWAIT "Attente de l'utilisateur..."

									#define MSG_RESUMING "Reprise de l'impression"

									#define MSG_NO_MOVE "Aucun mouvement."

									#define MSG_PART_RELEASE "Relache partielle"

									#define MSG_KILLED "MORT."

									#define MSG_STOPPED "STOPPE."

									#define MSG_STEPPER_RELEASED "RELACHE."

									#define MSG_CONTROL_RETRACT "Retraction mm"

									#define MSG_CONTROL_RETRACTF "Retraction F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet F"

									#define MSG_AUTORETRACT "Retract. Auto."

									#define MSG_FILAMENTCHANGE "Changer filament"

									#define MSG_INIT_SDCARD "Init. la carte SD"

									#define MSG_CNG_SDCARD "Changer de carte SD"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing "Mise en tampon \""

									#define MSG_POWERUP "Allumage"

									#define MSG_EXTERNAL_RESET " RAZ Externe"

									#define MSG_BROWNOUT_RESET " RAZ defaut alim."

									#define MSG_WATCHDOG_RESET " RAZ Watchdog"

									#define MSG_SOFTWARE_RESET " RAZ logicielle"

									#define MSG_MARLIN "Marlin "

									#define MSG_AUTHOR " | Auteur: "

									#define MSG_CONFIGURATION_VER " Derniere MaJ: "

									#define MSG_FREE_MEMORY " Memoire libre: "

									#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Fichier enregistre."

									#define MSG_ERR_LINE_NO "Le numero de ligne n'est pas la derniere ligne + 1, derniere ligne: "

									#define MSG_ERR_CHECKSUM_MISMATCH "Erreur somme de controle, derniere ligne: "

									#define MSG_ERR_NO_CHECKSUM "Pas de somme de controle avec le numero de ligne, derniere ligne: "

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Pas de numero de ligne avec somme de controle, derniere ligne: "

									#define MSG_FILE_PRINTED "Impression terminee"

									#define MSG_BEGIN_FILE_LIST "Debut de la liste de fichiers"

									#define MSG_END_FILE_LIST "Fin de la liste de fichiers"

									#define MSG_M104_INVALID_EXTRUDER "M104 Extruder invalide"

									#define MSG_M105_INVALID_EXTRUDER "M105 Extruder invalide"

									#define MSG_M218_INVALID_EXTRUDER "M218 Extruder invalide"

									#define MSG_ERR_NO_THERMISTORS "Pas de thermistor, pas de temperature"

									#define MSG_M109_INVALID_EXTRUDER "M109 Extruder invalide "

									#define MSG_HEATING "En chauffe..."

									#define MSG_HEATING_COMPLETE "Chauffe terminee."

									#define MSG_BED_HEATING "Chauffe du lit."

									#define MSG_BED_DONE "Chauffe du lit terminee."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Compteur X: "

									#define MSG_ERR_KILLED "Impression arretee. kill() appelee!"

									#define MSG_ERR_STOPPED "Impression arretee a cause d'erreurs. Corriger les erreurs et utiliser M999 pour la reprendre. (Temperature remise a zero. Reactivez la apres redemarrage)"

									#define MSG_RESEND "Renvoie: "

									#define MSG_UNKNOWN_COMMAND "Commande inconnue: \""

									#define MSG_ACTIVE_EXTRUDER "Extrudeur actif: "

									#define MSG_INVALID_EXTRUDER "Extrudeur invalide"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Affichage du status des fin de course"

									#define MSG_ENDSTOP_HIT "DECLENCHE"

									#define MSG_ENDSTOP_OPEN "OUVERT"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR "Impossible d'ouvrir le sous-repertoire"

									#define MSG_SD_INIT_FAIL "Echec de l'initialisation de la SD"

									#define MSG_SD_VOL_INIT_FAIL "Echec de volume.init"

									#define MSG_SD_OPENROOT_FAIL "Echec openRoot"

									#define MSG_SD_CARD_OK "Carte SD Ok"

									#define MSG_SD_WORKDIR_FAIL "Echec d'ouverture workDir"

									#define MSG_SD_OPEN_FILE_FAIL "Echec d'ouverture, Fichier: "

									#define MSG_SD_FILE_OPENED "Fichier ouvert: "

									#define MSG_SD_SIZE " Taille: "

									#define MSG_SD_FILE_SELECTED "Fichier selectionne"

									#define MSG_SD_WRITE_TO_FILE "Ecriture dans le fichier: "

									#define MSG_SD_PRINTING_BYTE "Octet impression SD "

									#define MSG_SD_NOT_PRINTING "Pas d'impression SD"

									#define MSG_SD_ERR_WRITE_TO_FILE "Erreur d'ecriture dans le fichier"

									#define MSG_SD_CANT_ENTER_SUBDIR "Impossible d'entrer dans le sous-repertoire: "


									#define MSG_STEPPER_TOO_HIGH "Steprate trop eleve: "

									#define MSG_ENDSTOPS_HIT "Fin de course atteint: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusion a froid evitee"

									#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusion longue evitee"


								#endif


								#if LANGUAGE_CHOICE == 4


								// LCD Menu Messages


									#define WELCOME_MSG MACHINE_NAME " Bereit."


									#define MSG_SD_INSERTED      "SDKarte erkannt"

									#define MSG_SD_REMOVED       "SDKarte entfernt"

									#define MSG_MAIN             "Hauptmenü"

									#define MSG_AUTOSTART        "Autostart"

									#define MSG_DISABLE_STEPPERS "Stepper abschalten"

									#define MSG_AUTO_HOME        "Auto Nullpunkt"

									#define MSG_SET_ORIGIN       "Setze Nullpunkt"

									#define MSG_PREHEAT_PLA      "Vorwärmen PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Vorwärmen PLA Einstellungen"

									#define MSG_PREHEAT_ABS      "Vorwärmen ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Vorwärmen ABS Einstellungen"

									#define MSG_COOLDOWN         "Abkühlen"

									#define MSG_SWITCH_PS_ON     "Switch Power On"

									#define MSG_SWITCH_PS_OFF    "Switch Power Off"

									#define MSG_EXTRUDE          "Extrude"

									#define MSG_RETRACT          "Retract"

									#define MSG_MOVE_AXIS        "Achsen bewegen"

									#define MSG_SPEED            "Geschw"

									#define MSG_NOZZLE           "Düse"

									#define MSG_NOZZLE1          "Düse2"

									#define MSG_NOZZLE2          "Düse3"

									#define MSG_BED              "Bett"

									#define MSG_FAN_SPEED        "Lüftergeschw."

									#define MSG_FLOW             "Fluss"

									#define MSG_CONTROL          "Einstellungen"

									#define MSG_MIN              "\002 Min"

									#define MSG_MAX              "\002 Max"

									#define MSG_FACTOR           "\002 Faktor"

									#define MSG_AUTOTEMP         "AutoTemp"

									#define MSG_ON               "Ein"

									#define MSG_OFF              "Aus"

									#define MSG_PID_P            "PID-P"

									#define MSG_PID_I            "PID-I"

									#define MSG_PID_D            "PID-D"

									#define MSG_PID_C            "PID-C"

									#define MSG_ACC              "Acc"

									#define MSG_VXY_JERK         "Vxy-jerk"

									#define MSG_VZ_JERK          "Vz-jerk"

									#define MSG_VE_JERK          "Ve-jerk"

									#define MSG_VMAX             "Vmax "

									#define MSG_X                "x"

									#define MSG_Y                "y"

									#define MSG_Z                "z"

									#define MSG_E                "e"

									#define MSG_VMIN             "Vmin"

									#define MSG_VTRAV_MIN        "VTrav min"

									#define MSG_AMAX             "Amax "

									#define MSG_A_RETRACT        "A-Retract"

									#define MSG_XSTEPS           "Xsteps/mm"

									#define MSG_YSTEPS           "Ysteps/mm"

									#define MSG_ZSTEPS           "Zsteps/mm"

									#define MSG_ESTEPS           "Esteps/mm"

									#define MSG_RECTRACT_WIDE    "Rectract"

									#define MSG_WATCH            "Beobachten"

									#define MSG_TEMPERATURE      "Temperatur"

									#define MSG_MOTION           "Bewegung"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM      "EPROM speichern"

									#define MSG_LOAD_EPROM       "EPROM laden"

									#define MSG_RESTORE_FAILSAFE "Standardkonfig."

									#define MSG_REFRESH          "Aktualisieren"

									#define MSG_PREPARE          "Vorbereitung"

									#define MSG_CONTROL          "Einstellungen"

									#define MSG_TUNE             "Justierung"

									#define MSG_PAUSE_PRINT      "Druck anhalten"

									#define MSG_RESUME_PRINT     "Druck fortsetz"

									#define MSG_STOP_PRINT       "Druck stoppen"

									#define MSG_CARD_MENU        "SDKarten Menü"

									#define MSG_NO_CARD          "Keine SDKarte"

									#define MSG_DWELL            "Warten..."

									#define MSG_USERWAIT         "Warte auf Nutzer..."

									#define MSG_RESUMING         "Druck fortsetzung"

									#define MSG_NO_MOVE          "Kein Zug."

									#define MSG_PART_RELEASE     "Stepper tlw frei"

									#define MSG_KILLED           "KILLED"

									#define MSG_STOPPED          "GESTOPPT"

									#define MSG_STEPPER_RELEASED "Stepper frei"

									#define MSG_CONTROL_RETRACT  "Retract mm"

									#define MSG_CONTROL_RETRACTF "Retract  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"

									#define MSG_AUTORETRACT      "AutoRetr."

									#define MSG_FILAMENTCHANGE "Filament wechseln"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing "enqueing \""

									#define MSG_POWERUP "PowerUp"

									#define MSG_EXTERNAL_RESET " External Reset"

									#define MSG_BROWNOUT_RESET " Brown out Reset"

									#define MSG_WATCHDOG_RESET " Watchdog Reset"

									#define MSG_SOFTWARE_RESET " Software Reset"

									#define MSG_MARLIN "Marlin: "

									#define MSG_AUTHOR " | Author: "

									#define MSG_CONFIGURATION_VER " Last Updated: "

									#define MSG_FREE_MEMORY " Free Memory: "

									#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Done saving file."

									#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"

									#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"

									#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"

									#define MSG_FILE_PRINTED "Done printing file"

									#define MSG_BEGIN_FILE_LIST "Begin file list"

									#define MSG_END_FILE_LIST "End file list"

									#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "

									#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "

									#define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "

									#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"

									#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "

									#define MSG_HEATING "Heating..."

									#define MSG_HEATING_COMPLETE "Heating done."

									#define MSG_BED_HEATING "Bed Heating."

									#define MSG_BED_DONE "Bed done."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Count X:"

									#define MSG_ERR_KILLED "Printer halted. kill() called !!"

									#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"

									#define MSG_RESEND "Resend:"

									#define MSG_UNKNOWN_COMMAND "Unknown command:\""

									#define MSG_ACTIVE_EXTRUDER "Active Extruder: "

									#define MSG_INVALID_EXTRUDER "Invalid extruder"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Reporting endstop status"

									#define MSG_ENDSTOP_HIT "TRIGGERED"

									#define MSG_ENDSTOP_OPEN "open"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"

									#define MSG_SD_INIT_FAIL "SD init fail"

									#define MSG_SD_VOL_INIT_FAIL "volume.init failed"

									#define MSG_SD_OPENROOT_FAIL "openRoot failed"

									#define MSG_SD_CARD_OK "SD card ok"

									#define MSG_SD_WORKDIR_FAIL "workDir open failed"

									#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "

									#define MSG_SD_FILE_OPENED "File opened:"

									#define MSG_SD_SIZE " Size:"

									#define MSG_SD_FILE_SELECTED "File selected"

									#define MSG_SD_WRITE_TO_FILE "Writing to file: "

									#define MSG_SD_PRINTING_BYTE "SD printing byte "

									#define MSG_SD_NOT_PRINTING "Not SD printing"

									#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"

									#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"


									#define MSG_STEPPER_TOO_HIGH "Steprate too high : "

									#define MSG_ENDSTOPS_HIT "endstops hit: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"

									#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"


								#endif


								#if LANGUAGE_CHOICE == 5


								// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME "Lista."

									#define MSG_SD_INSERTED "Tarjeta SD Colocada"

									#define MSG_SD_REMOVED "Tarjeta SD Retirada"

									#define MSG_MAIN "Menu Principal"

									#define MSG_AUTOSTART " Autostart"

									#define MSG_DISABLE_STEPPERS "Apagar Motores"

									#define MSG_AUTO_HOME "Llevar al Origen" // "Llevar Ejes al Cero"

									#define MSG_SET_ORIGIN "Establecer Cero"

									#define MSG_PREHEAT_PLA "Precalentar PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Ajustar temp. PLA"

									#define MSG_PREHEAT_ABS "Precalentar ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Ajustar temp. ABS"

									#define MSG_COOLDOWN "Enfriar"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE "Extruir"

									#define MSG_RETRACT "Retraer"

									#define MSG_MOVE_AXIS "Mover Ejes"

									#define MSG_SPEED "Velocidad"

									#define MSG_NOZZLE "Nozzle"

									#define MSG_NOZZLE1 "Nozzle2"

									#define MSG_NOZZLE2 "Nozzle3"

									#define MSG_BED "Base"

									#define MSG_FAN_SPEED "Ventilador"

									#define MSG_FLOW "Flujo"

									#define MSG_CONTROL "Control"

									#define MSG_MIN "\002 Min"

									#define MSG_MAX "\002 Max"

									#define MSG_FACTOR "\002 Fact"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On"

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Acel"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax"

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VTrav min"

									#define MSG_AMAX "Amax"

									#define MSG_A_RETRACT "A-retrac."

									#define MSG_XSTEPS "X pasos/mm"

									#define MSG_YSTEPS "Y pasos/mm"

									#define MSG_ZSTEPS "Z pasos/mm"

									#define MSG_ESTEPS "E pasos/mm"

									#define MSG_RECTRACT "Retraer"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Movimiento"

									#define MSG_STORE_EPROM "Guardar Memoria"

									#define MSG_LOAD_EPROM "Cargar Memoria"

									#define MSG_RESTORE_FAILSAFE "Rest. de emergencia"

									#define MSG_REFRESH "Volver a cargar"

									#define MSG_WATCH "Monitorizar"

									#define MSG_PREPARE "Preparar"

									#define MSG_TUNE "Ajustar"

									#define MSG_PAUSE_PRINT "Pausar Impresion"

									#define MSG_RESUME_PRINT "Reanudar Impresion"

									#define MSG_STOP_PRINT "Detener Impresion"

									#define MSG_CARD_MENU "Menu de SD"

									#define MSG_NO_CARD "No hay Tarjeta SD"

									#define MSG_DWELL "Reposo..."

									#define MSG_USERWAIT "Esperando Ordenes..."

									#define MSG_RESUMING "Resumiendo Impresion"

									#define MSG_NO_MOVE "Sin movimiento"

									#define MSG_KILLED "PARADA DE EMERGENCIA. "

									#define MSG_STOPPED "PARADA."

									#define MSG_CONTROL_RETRACT  "Retraer mm"

									#define MSG_CONTROL_RETRACTF "Retraer  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Levantar mm"

									#define MSG_CONTROL_RETRACT_RECOVER "DesRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "DesRet F"

									#define MSG_AUTORETRACT "AutoRetr."

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Iniciando. Tarjeta-SD"

									#define MSG_CNG_SDCARD "Cambiar Tarjeta-SD"

									#define MSG_RECTRACT_WIDE "Retraer"

									#define MSG_TEMPERATURE_WIDE "Temperatura"

									#define MSG_TEMPERATURE_RTN  "Temperatura"

									#define MSG_MAIN_WIDE "Menu Principal"

									#define MSG_MOTION_WIDE "Movimiento"

									#define MSG_PREPARE_ALT "Preparar"

									#define MSG_CONTROL_ARROW "Control"

									#define MSG_RETRACT_ARROW "Retraer"

									#define MSG_PART_RELEASE "Desacople Parcial"

									#define MSG_STEPPER_RELEASED "Desacoplada."

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing "En cola \""

									#define MSG_POWERUP "PowerUp"

									#define MSG_EXTERNAL_RESET " Reset Externo"

									#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"

									#define MSG_WATCHDOG_RESET " Reset por Bloqueo"

									#define MSG_SOFTWARE_RESET " Reset por Software"

									#define MSG_MARLIN "Marlin "

									#define MSG_AUTHOR " | Autor: "

									#define MSG_CONFIGURATION_VER " Ultima actualizacion: "

									#define MSG_FREE_MEMORY " Memoria libre: "

									#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Guardado."

									#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"

									#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"

									#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"

									#define MSG_FILE_PRINTED "Impresion terminada"

									#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"

									#define MSG_END_FILE_LIST "Fin de la lista de archivos"

									#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "

									#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "

									#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor Invalido "

									#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"

									#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "

									#define MSG_HEATING "Calentando..."

									#define MSG_HEATING_COMPLETE "Calentamiento Hecho."

									#define MSG_BED_HEATING "Calentando la base."

									#define MSG_BED_DONE "Base Caliente."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Cuenta X:"

									#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"

									#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"

									#define MSG_RESEND "Reenviar:"

									#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""

									#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "

									#define MSG_INVALID_EXTRUDER "Extrusor Invalido"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Comprobando fines de carrera."

									#define MSG_ENDSTOP_HIT "PULSADO"

									#define MSG_ENDSTOP_OPEN "abierto"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"

									#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."

									#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"

									#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"

									#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"

									#define MSG_SD_CARD_OK "Tarjeta SD OK"

									#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"

									#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "

									#define MSG_SD_FILE_OPENED "Archivo abierto:"

									#define MSG_SD_SIZE " Tamaño:"

									#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"

									#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "

									#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "

									#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"

									#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"

									#define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"


									#define MSG_STEPPER_TOO_HIGH "Steprate demasiado alto : "

									#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"

									#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"


								#endif


								#if LANGUAGE_CHOICE == 6


									// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME			" Готов"

									#define MSG_SD_INSERTED						"Карта вставлена"

									#define MSG_SD_REMOVED						"Карта извлечена"

									#define MSG_MAIN							" Меню              \003"

									#define MSG_AUTOSTART						" Автостарт          "

									#define MSG_DISABLE_STEPPERS				" Выключить двигатели"

									#define MSG_AUTO_HOME						" Парковка           "

									#define MSG_SET_ORIGIN						" Запомнить ноль     "

									#define MSG_PREHEAT_PLA						" Преднагрев PLA     "

									#define MSG_PREHEAT_PLA_SETTINGS			" Настр. преднагр.PLA"

									#define MSG_PREHEAT_ABS						" Преднагрев ABS     "

									#define MSG_PREHEAT_ABS_SETTINGS			" Настр. преднагр.ABS"

									#define MSG_COOLDOWN						" Охлаждение         "

									#define MSG_SWITCH_PS_ON					"Switch Power On"

									#define MSG_SWITCH_PS_OFF					"Switch Power Off"

									#define MSG_EXTRUDE							" Экструзия          "

									#define MSG_RETRACT							" Откат"

									#define MSG_MOVE_AXIS						" Движение по осям  \x7E"

									#define MSG_SPEED							" Скорость:"

									#define MSG_NOZZLE							" \002 Фильера:"

									#define MSG_NOZZLE1							" \002 Фильера2:"

									#define MSG_NOZZLE2							" \002 Фильера3:"

									#define MSG_BED								" \002 Кровать:"

									#define MSG_FAN_SPEED						" Куллер:"

									#define MSG_FLOW							" Поток:"

									#define MSG_CONTROL							" Настройки \003"

									#define MSG_MIN								" \002 Минимум:"

									#define MSG_MAX								" \002 Максимум:"

									#define MSG_FACTOR							" \002 Фактор:"

									#define MSG_AUTOTEMP						" Autotemp:"

									#define MSG_ON								"Вкл. "

									#define MSG_OFF								"Выкл. "

									#define MSG_PID_P							" PID-P: "

									#define MSG_PID_I							" PID-I: "

									#define MSG_PID_D							" PID-D: "

									#define MSG_PID_C							" PID-C: "

									#define MSG_ACC								" Acc:"

									#define MSG_VXY_JERK						" Vxy-jerk: "

									#define MSG_VZ_JERK                         "Vz-jerk"

									#define MSG_VE_JERK                         "Ve-jerk"

									#define MSG_VMAX							" Vmax "

									#define MSG_X								"x:"

									#define MSG_Y								"y:"

									#define MSG_Z								"z:"

									#define MSG_E								"e:"

									#define MSG_VMIN							" Vmin:"

									#define MSG_VTRAV_MIN						" VTrav min:"

									#define MSG_AMAX							" Amax "

									#define MSG_A_RETRACT						" A-retract:"

									#define MSG_XSTEPS							" X шаг/mm:"

									#define MSG_YSTEPS							" Y шаг/mm:"

									#define MSG_ZSTEPS							" Z шаг/mm:"

									#define MSG_ESTEPS							" E шаг/mm:"

									#define MSG_RECTRACT    					" Откат подачи      \x7E"

									#define MSG_TEMPERATURE  				" Температура       \x7E"

									#define MSG_MOTION						" Скорости          \x7E"

										#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM						" Сохранить настройки"

									#define MSG_LOAD_EPROM						" Загрузить настройки"

									#define MSG_RESTORE_FAILSAFE				" Сброс настроек     "

									#define MSG_REFRESH							"\004Обновить           "

									#define MSG_WATCH							" Обзор             \003"

									#define MSG_PREPARE							" Действия          \x7E"

									#define MSG_TUNE					" Настройки         \x7E"

									#define MSG_PAUSE_PRINT						" Пауза печати      \x7E"

									#define MSG_RESUME_PRINT					" Продолжить печать \x7E"

									#define MSG_STOP_PRINT						" Остановить печать \x7E"

									#define MSG_CARD_MENU						" Меню карты        \x7E"

									#define MSG_NO_CARD							" Нет карты"

									#define MSG_DWELL							"Сон..."

									#define MSG_USERWAIT						"Нажмите для продолж."

									#define MSG_RESUMING "Resuming print"

									#define MSG_NO_MOVE							"Нет движения.       "

									#define MSG_PART_RELEASE					" Извлечение принта  "

									#define MSG_KILLED							"УБИТО. "

									#define MSG_STOPPED							"ОСТАНОВЛЕНО. "

									#define MSG_CONTROL_RETRACT					" Откат mm:"

									#define MSG_CONTROL_RETRACTF				" Откат  F:"

									#define MSG_CONTROL_RETRACT_ZLIFT			" Прыжок mm:"

									#define MSG_CONTROL_RETRACT_RECOVER			" Возврат +mm:"

									#define MSG_CONTROL_RETRACT_RECOVERF		" Возврат  F:"

									#define MSG_AUTORETRACT						" АвтоОткат:"

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing						"Запланировано \""

									#define MSG_POWERUP							"Включение питания"

									#define MSG_EXTERNAL_RESET					" Внешний сброс"

									#define MSG_BROWNOUT_RESET					" Brown out сброс"

									#define MSG_WATCHDOG_RESET					" Watchdog сброс"

									#define MSG_SOFTWARE_RESET					" программный сброс"

									#define MSG_MARLIN							"Marlin "

									#define MSG_AUTHOR							" | Автор: "

									#define MSG_CONFIGURATION_VER				" Последнее обновление: "

									#define MSG_FREE_MEMORY						" Памяти свободно: "

									#define MSG_PLANNER_BUFFER_BYTES			"  Буффер очереди команд Bytes: "

									#define MSG_OK								"ok"

									#define MSG_FILE_SAVED						"Файл записан."

									#define MSG_ERR_LINE_NO						"Номен строки это не последняя строка+1, последняя строка:"

									#define MSG_ERR_CHECKSUM_MISMATCH			"контрольная сумма не совпадает, последняя строка:"

									#define MSG_ERR_NO_CHECKSUM					"нет контрольной суммы для строки, последняя строка:"

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM	"нет строки для контрольной суммы, последняя строка:"

									#define MSG_FILE_PRINTED					"Печать файла завершена"

									#define MSG_BEGIN_FILE_LIST					"Список файлов"

									#define MSG_END_FILE_LIST					"Конец списка файлов"

									#define MSG_M104_INVALID_EXTRUDER			"M104 ошибка экструдера "

									#define MSG_M105_INVALID_EXTRUDER			"M105 ошибка экструдера "

									#define MSG_M218_INVALID_EXTRUDER			"M218 ошибка экструдера "

									#define MSG_ERR_NO_THERMISTORS				"Нет термистра - нет температуры"

									#define MSG_M109_INVALID_EXTRUDER			"M109 ошибка экструдера "

									#define MSG_HEATING							"Нагрев...  "

									#define MSG_HEATING_COMPLETE				"Наргето.    "

									#define MSG_BED_HEATING						"Нагрев стола...     "

									#define MSG_BED_DONE						"Стол нагрет.        "

									#define MSG_M115_REPORT						"FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X							" Count X:"

									#define MSG_ERR_KILLED						"Принтер остановлен. вызов kill() !!"

									#define MSG_ERR_STOPPED						"Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"

									#define MSG_RESEND							"Переотправка:"

									#define MSG_UNKNOWN_COMMAND					"Неизвестная команда:\""

									#define MSG_ACTIVE_EXTRUDER					"Активный экструдер: "

									#define MSG_INVALID_EXTRUDER				"Ошибка экструдера"

									#define MSG_X_MIN							"x_min:"

									#define MSG_X_MAX							"x_max:"

									#define MSG_Y_MIN							"y_min:"

									#define MSG_Y_MAX							"y_max:"

									#define MSG_Z_MIN							"z_min:"

									#define MSG_Z_MAX							"z_max:"

									#define MSG_M119_REPORT						"Статус концевиков"

									#define MSG_ENDSTOP_HIT						"Срабатывание концевика"

									#define MSG_ENDSTOP_OPEN					"Концевик освобожден"

									#define MSG_HOTEND_OFFSET					"Hotend offsets:"

									#define MSG_SD_CANT_OPEN_SUBDIR				"Не открыть папку"

									#define MSG_SD_INIT_FAIL					"Ошибка инициализации SD"

									#define MSG_SD_VOL_INIT_FAIL				"Ошибка инициализации раздела"

									#define MSG_SD_OPENROOT_FAIL				"Не прочесть содержимое корня"

									#define MSG_SD_CARD_OK						"SD карта в порядке"

									#define MSG_SD_WORKDIR_FAIL					"не открыть рабочую папку"

									#define MSG_SD_OPEN_FILE_FAIL				"Ошибка чтения, файл: "

									#define MSG_SD_FILE_OPENED					"Файл открыт:"

									#define MSG_SD_SIZE							" Размер:"

									#define MSG_SD_FILE_SELECTED				"Файл выбран"

									#define MSG_SD_WRITE_TO_FILE				"Запись в файл: "

									#define MSG_SD_PRINTING_BYTE				"SD печать byte "

									#define MSG_SD_NOT_PRINTING					"нет SD печати"

									#define MSG_SD_ERR_WRITE_TO_FILE			"ошибка записи в файл"

									#define MSG_SD_CANT_ENTER_SUBDIR			"Не зайти в папку:"

									#define MSG_STEPPER_TOO_HIGH				"Частота шагов очень высока : "

									#define MSG_ENDSTOPS_HIT					"концевик сработал: "

									#define MSG_ERR_COLD_EXTRUDE_STOP			" защита холодной экструзии"

									#define MSG_ERR_LONG_EXTRUDE_STOP			" защита превышения длинны экструзии"


								#endif


								#if LANGUAGE_CHOICE == 7


									// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME " Pronta"

									#define MSG_SD_INSERTED          "SD Card inserita"

									#define MSG_SD_REMOVED           "SD Card rimossa"

									#define MSG_MAIN                 "Menu principale"

									#define MSG_AUTOSTART            "Autostart"

									#define MSG_DISABLE_STEPPERS     "Disabilita Motori"

									#define MSG_AUTO_HOME            "Auto Home"

									#define MSG_SET_ORIGIN           "Imposta Origine"

									#define MSG_PREHEAT_PLA          "Preriscalda PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Preris. PLA Conf"

									#define MSG_PREHEAT_ABS          "Preriscalda ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Preris. ABS Conf"

									#define MSG_COOLDOWN             "Raffredda"

									#define MSG_SWITCH_PS_ON         "Switch Power On"

									#define MSG_SWITCH_PS_OFF        "Switch Power Off"

									#define MSG_EXTRUDE              "Estrudi"

									#define MSG_RETRACT              "Ritrai"

									#define MSG_MOVE_AXIS            "Muovi Asse"

									#define MSG_SPEED                "Velcità"

									#define MSG_NOZZLE               "Ugello"

									#define MSG_NOZZLE1              "Ugello2"

									#define MSG_NOZZLE2              "Ugello3"

									#define MSG_BED                  "Piatto"

									#define MSG_FAN_SPEED            "Ventola"

									#define MSG_FLOW                 "Flusso"

									#define MSG_CONTROL              "Controllo"

									#define MSG_MIN                  " \002 Min:"

									#define MSG_MAX                  " \002 Max:"

									#define MSG_FACTOR               " \002 Fact:"

									#define MSG_AUTOTEMP             "Autotemp"

									#define MSG_ON                   "On "

									#define MSG_OFF                  "Off"

									#define MSG_PID_P                "PID-P"

									#define MSG_PID_I                "PID-I"

									#define MSG_PID_D                "PID-D"

									#define MSG_PID_C                "PID-C"

									#define MSG_ACC                  "Accel"

									#define MSG_VXY_JERK             "Vxy-jerk"

									#define MSG_VZ_JERK              "Vz-jerk"

									#define MSG_VE_JERK              "Ve-jerk"

									#define MSG_VMAX                 "Vmax"

									#define MSG_X                    "x"

									#define MSG_Y                    "y"

									#define MSG_Z                    "z"

									#define MSG_E                    "e"

									#define MSG_VMIN                 "Vmin"

									#define MSG_VTRAV_MIN            "VTrav min"

									#define MSG_AMAX                 "Amax"

									#define MSG_A_RETRACT            "A-retract"

									#define MSG_XSTEPS               "Xpassi/mm"

									#define MSG_YSTEPS               "Ypassi/mm"

									#define MSG_ZSTEPS               "Zpassi/mm"

									#define MSG_ESTEPS               "Epassi/mm"

									#define MSG_RECTRACT             "Ritrai"

									#define MSG_TEMPERATURE          "Temperatura"

									#define MSG_MOTION               "Movimento"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM          "Salva in EEPROM"

									#define MSG_LOAD_EPROM           "Carica da EEPROM"

									#define MSG_RESTORE_FAILSAFE     "Impostaz. default"

									#define MSG_REFRESH              "Aggiorna"

									#define MSG_WATCH                "Guarda"

									#define MSG_PREPARE              "Prepara"

									#define MSG_TUNE                 "Adatta"

									#define MSG_PAUSE_PRINT          "Pausa"

									#define MSG_RESUME_PRINT         "Riprendi Stampa"

									#define MSG_STOP_PRINT           "Arresta Stampa"

									#define MSG_CARD_MENU            "SD Card Menu"

									#define MSG_NO_CARD              "No SD Card"

									#define MSG_DWELL                "Sospensione..."

									#define MSG_USERWAIT             "Attendi Utente..."

									#define MSG_RESUMING             "Riprendi Stampa"

									#define MSG_NO_MOVE              "Nessun Movimento."

									#define MSG_KILLED               "UCCISO. "

									#define MSG_STOPPED              "ARRESTATO. "

									#define MSG_CONTROL_RETRACT      "Ritrai mm"

									#define MSG_CONTROL_RETRACTF     "Ritrai  F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"

									#define MSG_AUTORETRACT          "AutoArretramento"

									#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."

									#define MSG_FILAMENTCHANGE       "Cambia filamento"

									#define MSG_INIT_SDCARD          "Iniz. SD-Card"

									#define MSG_CNG_SDCARD           "Cambia SD-Card"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


									// Serial Console Messages


									#define MSG_Enqueing             "accodamento \""

									#define MSG_POWERUP              "Accensione"

									#define MSG_EXTERNAL_RESET       " Reset Esterno"

									#define MSG_BROWNOUT_RESET       " Brown out Reset"

									#define MSG_WATCHDOG_RESET       " Watchdog Reset"

									#define MSG_SOFTWARE_RESET       " Software Reset"

									#define MSG_MARLIN               "Marlin "

									#define MSG_AUTHOR               " | Autore: "

									#define MSG_CONFIGURATION_VER    " Ultimo Aggiornamento: "

									#define MSG_FREE_MEMORY          " Memoria Libera: "

									#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

									#define MSG_OK                   "ok"

									#define MSG_FILE_SAVED           "File Salvato."

									#define MSG_ERR_LINE_NO          "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea: "

									#define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea: "

									#define MSG_ERR_NO_CHECKSUM      "Nessun Checksum con Numero di Linea, Ultima Linea: "

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea: "

									#define MSG_FILE_PRINTED         "File stampato"

									#define MSG_BEGIN_FILE_LIST      "Inizio Lista File"

									#define MSG_END_FILE_LIST        "Fine Lista File"

									#define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "

									#define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "

									#define MSG_M218_INVALID_EXTRUDER "M218 Estrusore non valido "

									#define MSG_ERR_NO_THERMISTORS   "Nessun Termistore - nessuna temperatura"

									#define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "

									#define MSG_HEATING              "Riscaldamento..."

									#define MSG_HEATING_COMPLETE     "Stampante Calda."

									#define MSG_BED_HEATING          "Riscaldamento Piatto."

									#define MSG_BED_DONE             "Piatto Pronto."

									#define MSG_M115_REPORT          "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X              " Calcola X: "

									#define MSG_ERR_KILLED           "Stampante Calda. kill() chiamata !!"

									#define MSG_ERR_STOPPED          "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"

									#define MSG_RESEND               "Reinviato:"

									#define MSG_UNKNOWN_COMMAND      "Comando sconosciuto: \""

									#define MSG_ACTIVE_EXTRUDER      "Attiva Estrusore: "

									#define MSG_INVALID_EXTRUDER     "Estrusore non valido"

									#define MSG_X_MIN                "x_min: "

									#define MSG_X_MAX                "x_max: "

									#define MSG_Y_MIN                "y_min: "

									#define MSG_Y_MAX                "y_max: "

									#define MSG_Z_MIN                "z_min: "

									#define MSG_Z_MAX                "z_max: "

									#define MSG_M119_REPORT          "Segnalazione stato degli endstop"

									#define MSG_ENDSTOP_HIT          "INNESCATO"

									#define MSG_ENDSTOP_OPEN         "aperto"

									#define MSG_HOTEND_OFFSET        "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR  "Impossibile aprire sottocartella"

									#define MSG_SD_INIT_FAIL         "Fallita Inizializzazione SD"

									#define MSG_SD_VOL_INIT_FAIL     "Fallito il montaggio del Volume"

									#define MSG_SD_OPENROOT_FAIL     "Fallita l'apertura Cartella Principale"

									#define MSG_SD_CARD_OK           "SD card ok"

									#define MSG_SD_WORKDIR_FAIL      "Fallita l'apertura Cartella di Lavoro"

									#define MSG_SD_OPEN_FILE_FAIL    "Fallita l'apertura del File: "

									#define MSG_SD_FILE_OPENED       "File aperto: "

									#define MSG_SD_SIZE              " Dimensione: "

									#define MSG_SD_FILE_SELECTED     "File selezionato"

									#define MSG_SD_WRITE_TO_FILE     "Scrittura su file: "

									#define MSG_SD_PRINTING_BYTE     "Si sta scrivendo il byte su SD "

									#define MSG_SD_NOT_PRINTING      "Non si sta scrivendo su SD"

									#define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"

									#define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella: "


									#define MSG_STEPPER_TOO_HIGH     "Steprate troppo alto: "

									#define MSG_ENDSTOPS_HIT         "Raggiunto il fondo carrello: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"

									#define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"


								#endif


								#if LANGUAGE_CHOICE == 8


								// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME " Pronta."

									#define MSG_SD_INSERTED "Cartao SD inserido"

									#define MSG_SD_REMOVED "Cartao SD removido"

									#define MSG_MAIN " Menu Principal \003"

									#define MSG_AUTOSTART " Autostart"

									#define MSG_DISABLE_STEPPERS " Apagar Motores"

									#define MSG_AUTO_HOME " Ir para Origen"

									#define MSG_SET_ORIGIN " Estabelecer Origen"

									#define MSG_PREHEAT_PLA " pre-aquecer PLA"

									#define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"

									#define MSG_PREHEAT_ABS " pre-aquecer ABS"

									#define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"

									#define MSG_COOLDOWN " Esfriar"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE " Extrudar"

									#define MSG_RETRACT " Retrair"

									#define MSG_PREHEAT_PLA " pre-aquecer PLA"

									#define MSG_PREHEAT_ABS " pre-aquecer ABS"

									#define MSG_MOVE_AXIS " Mover eixo      \x7E"

									#define MSG_SPEED " Velocidade:"

									#define MSG_NOZZLE " \002Nozzle:"

									#define MSG_NOZZLE1 " \002Nozzle2:"

									#define MSG_NOZZLE2 " \002Nozzle3:"

									#define MSG_BED " \002Base:"

									#define MSG_FAN_SPEED " Velocidade Ventoinha:"

									#define MSG_FLOW " Fluxo:"

									#define MSG_CONTROL " Controle \003"

									#define MSG_MIN " \002 Min:"

									#define MSG_MAX " \002 Max:"

									#define MSG_FACTOR " \002 Fact:"

									#define MSG_AUTOTEMP " Autotemp:"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P " PID-P: "

									#define MSG_PID_I " PID-I: "

									#define MSG_PID_D " PID-D: "

									#define MSG_PID_C " PID-C: "

									#define MSG_ACC  " Acc:"

									#define MSG_VXY_JERK " Vxy-jerk: "

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX " Vmax "

									#define MSG_X "x:"

									#define MSG_Y "y:"

									#define MSG_Z "z:"

									#define MSG_E "e:"

									#define MSG_VMIN " Vmin:"

									#define MSG_VTRAV_MIN " VTrav min:"

									#define MSG_AMAX " Amax "

									#define MSG_A_RETRACT " A-retract:"

									#define MSG_XSTEPS " Xpasso/mm:"

									#define MSG_YSTEPS " Ypasso/mm:"

									#define MSG_ZSTEPS " Zpasso/mm:"

									#define MSG_ESTEPS " Epasso/mm:"

									#define MSG_MAIN_WIDE " Menu Principal  \003"

									#define MSG_RECTRACT "Retrair"

									#define MSG_TEMPERATURE "Temperatura"

									#define MSG_MOTION "Movimento"

									#define MSG_STORE_EPROM " Guardar memoria"

									#define MSG_LOAD_EPROM " Carregar memoria"

									#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"

									#define MSG_REFRESH "\004Recarregar"

									#define MSG_WATCH " Monitorar   \003"

									#define MSG_PREPARE " Preparar \x7E"

									#define MSG_PREPARE_ALT " Preparar \003"

									#define MSG_CONTROL_ARROW " Controle \x7E"

									#define MSG_RETRACT_ARROW " Retrair \x7E"

									#define MSG_TUNE " Tune    \x7E"

									#define MSG_PAUSE_PRINT " Pausar Impressao \x7E"

									#define MSG_RESUME_PRINT " Resumir Impressao \x7E"

									#define MSG_STOP_PRINT " Parar Impressao   \x7E"

									#define MSG_CARD_MENU " Menu cartao SD    \x7E"

									#define MSG_NO_CARD " Sem cartao SD"

									#define MSG_DWELL "Repouso..."

									#define MSG_USERWAIT "Esperando Ordem..."

									#define MSG_RESUMING "Resuming print"

									#define MSG_NO_MOVE "Sem movimento."

									#define MSG_PART_RELEASE "Lancamento Parcial"

									#define MSG_KILLED "PARADA DE EMERGENCIA. "

									#define MSG_STOPPED "PARADA. "

									#define MSG_STEPPER_RELEASED "Lancado."

									#define MSG_CONTROL_RETRACT  " Retrair mm:"

									#define MSG_CONTROL_RETRACTF " Retrair  F:"

									#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"

									#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"

									#define MSG_CONTROL_RETRACT_RECOVERF " DesRet  F:"

									#define MSG_AUTORETRACT " AutoRetr.:"

									#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

								    #define MSG_ZPROBE_OUT "Sonda fora da mesa"

								    #define MSG_POSITION_UNKNOWN "Home X/Y antes de Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing "enqueing \""

									#define MSG_POWERUP "PowerUp"

									#define MSG_EXTERNAL_RESET " Reset Externo"

									#define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"

									#define MSG_WATCHDOG_RESET " Reset por Bloqueio"

									#define MSG_SOFTWARE_RESET " Reset por Software"

									#define MSG_MARLIN "Marlin "

									#define MSG_AUTHOR " | Author: "

									#define MSG_CONFIGURATION_VER " Ultima atualizacao: "

									#define MSG_FREE_MEMORY " memoria Livre: "

									#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Guardado."

									#define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"

									#define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"

									#define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"

									#define MSG_FILE_PRINTED "Impressao terminada"

									#define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"

									#define MSG_END_FILE_LIST "Fim da lista de arquivos"

									#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "

									#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "

									#define MSG_M218_INVALID_EXTRUDER "M218 Extrusor inválido "

									#define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"

									#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "

									#define MSG_HEATING "Aquecendo..."

									#define MSG_HEATING_COMPLETE "Aquecido."

									#define MSG_BED_HEATING "Aquecendo a Base."

									#define MSG_BED_DONE "Base quente."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Conta X:"

									#define MSG_ERR_KILLED "Impressora parada com kill() !!"

									#define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"

									#define MSG_RESEND "Reenviar:"

									#define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""

									#define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "

									#define MSG_INVALID_EXTRUDER "Extrusor invalido"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Relatando estado do ponto final"

									#define MSG_ENDSTOP_HIT "PULSADO"

									#define MSG_ENDSTOP_OPEN "Aberto"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"

									#define MSG_SD_INIT_FAIL "Falha ao iniciar SD"

									#define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"

									#define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"

									#define MSG_SD_CARD_OK "cartao SD ok"

									#define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"

									#define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "

									#define MSG_SD_FILE_OPENED "Arquivo aberto:"

									#define MSG_SD_SIZE " Size:"

									#define MSG_SD_FILE_SELECTED "Arquivo selecionado"

									#define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "

									#define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "

									#define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"

									#define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"

									#define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"


									#define MSG_STEPPER_TOO_HIGH "Steprate muito alto : "

									#define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"

									#define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"


								#endif


								#if LANGUAGE_CHOICE == 9


								// Finnish


								// LCD Menu Messages

									#define WELCOME_MSG MACHINE_NAME " valmis"

									#define MSG_SD_INSERTED "Kortti asetettu"

									#define MSG_SD_REMOVED "Kortti poistettu"

									#define MSG_MAIN "Palaa"

									#define MSG_AUTOSTART "Automaatti"

									#define MSG_DISABLE_STEPPERS "Vapauta moottorit"

									#define MSG_AUTO_HOME "Aja referenssiin"

									#define MSG_SET_ORIGIN "Aseta origo"

									#define MSG_PREHEAT_PLA "Esilammita PLA"

									#define MSG_PREHEAT_PLA_SETTINGS "Esilammita PLA konf"

									#define MSG_PREHEAT_ABS "Esilammita ABS"

									#define MSG_PREHEAT_ABS_SETTINGS "Esilammita ABS konf"

									#define MSG_COOLDOWN "Jaahdyta"

									#define MSG_SWITCH_PS_ON "Switch Power On"

									#define MSG_SWITCH_PS_OFF "Switch Power Off"

									#define MSG_EXTRUDE "Pursota"

									#define MSG_RETRACT "Veda takaisin"

									#define MSG_MOVE_AXIS "Liikuta akseleita"

									#define MSG_SPEED "Nopeus"

									#define MSG_NOZZLE "Suutin"

									#define MSG_NOZZLE1 "Suutin2"

									#define MSG_NOZZLE2 "Suutin3"

									#define MSG_BED "Alusta"

									#define MSG_FAN_SPEED "Tuul. nopeus"

									#define MSG_FLOW "Virtaus"

									#define MSG_CONTROL "Kontrolli"

									#define MSG_MIN " \002 Min"

									#define MSG_MAX " \002 Max"

									#define MSG_FACTOR " \002 Kerr"

									#define MSG_AUTOTEMP "Autotemp"

									#define MSG_ON "On "

									#define MSG_OFF "Off"

									#define MSG_PID_P "PID-P"

									#define MSG_PID_I "PID-I"

									#define MSG_PID_D "PID-D"

									#define MSG_PID_C "PID-C"

									#define MSG_ACC  "Kiihtyv"

									#define MSG_VXY_JERK "Vxy-jerk"

									#define MSG_VZ_JERK "Vz-jerk"

									#define MSG_VE_JERK "Ve-jerk"

									#define MSG_VMAX "Vmax "

									#define MSG_X "x"

									#define MSG_Y "y"

									#define MSG_Z "z"

									#define MSG_E "e"

									#define MSG_VMIN "Vmin"

									#define MSG_VTRAV_MIN "VLiike min"

									#define MSG_AMAX "Amax "

									#define MSG_A_RETRACT "A-peruuta"

									#define MSG_XSTEPS "Xsteps/mm"

									#define MSG_YSTEPS "Ysteps/mm"

									#define MSG_ZSTEPS "Zsteps/mm"

									#define MSG_ESTEPS "Esteps/mm"

									#define MSG_RECTRACT "Veda takaisin"

									#define MSG_TEMPERATURE "Lampotila"

									#define MSG_MOTION "Liike"

									#define MSG_CONTRAST "LCD contrast"

									#define MSG_STORE_EPROM "Tallenna muistiin"

									#define MSG_LOAD_EPROM "Lataa muistista"

									#define MSG_RESTORE_FAILSAFE "Palauta oletus"

									#define MSG_REFRESH "Paivita"

									#define MSG_WATCH "Seuraa"

									#define MSG_PREPARE "Valmistele"

									#define MSG_TUNE "Saada"

									#define MSG_PAUSE_PRINT "Keskeyta tulostus"

									#define MSG_RESUME_PRINT "Jatka tulostusta"

									#define MSG_STOP_PRINT "Pysayta tulostus"

									#define MSG_CARD_MENU "Korttivalikko"

									#define MSG_NO_CARD "Ei korttia"

									#define MSG_DWELL "Nukkumassa..."

									#define MSG_USERWAIT "Odotetaan valintaa..."

									#define MSG_RESUMING "Jatketaan tulostusta"

									#define MSG_NO_MOVE "Ei liiketta."

									#define MSG_KILLED "KILLED. "

									#define MSG_STOPPED "STOPPED. "

									#define MSG_CONTROL_RETRACT  "Veda mm"

									#define MSG_CONTROL_RETRACTF "Veda F"

									#define MSG_CONTROL_RETRACT_ZLIFT "Z mm"

									#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"

									#define MSG_CONTROL_RETRACT_RECOVERF "UnRet  F"

									#define MSG_AUTORETRACT "AutoVeto."

									#define MSG_FILAMENTCHANGE "Change filament"

									#define MSG_INIT_SDCARD "Init. SD-Card"

									#define MSG_CNG_SDCARD "Change SD-Card"

								    #define MSG_ZPROBE_OUT "ZProbe Outside Bed"

								    #define MSG_POSITION_UNKNOWN "Home X/Y before Z"

								    #define MSG_ZPROBE_ZOFFSET "Z Offset"


								// Serial Console Messages


									#define MSG_Enqueing "jonoon \""

									#define MSG_POWERUP "Kaynnistys"

									#define MSG_EXTERNAL_RESET " Ulkoinen Reset"

									#define MSG_BROWNOUT_RESET " Alajannite Reset"

									#define MSG_WATCHDOG_RESET " Vahtikoira Reset"

									#define MSG_SOFTWARE_RESET " Ohjelmisto Reset"

									#define MSG_MARLIN "Marlin "

									#define MSG_AUTHOR " | Author: "

									#define MSG_CONFIGURATION_VER " Paivitetty viimeksi: "

									#define MSG_FREE_MEMORY " Vapaata muistia: "

									#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "

									#define MSG_OK "ok"

									#define MSG_FILE_SAVED "Tiedosto tallennettu."

									#define MSG_ERR_LINE_NO "Rivinumero ei ole Viimeisin rivi+1, Viimeisin rivi: "

									#define MSG_ERR_CHECKSUM_MISMATCH "Tarkistesummassa virhe, Viimeisin rivi: "

									#define MSG_ERR_NO_CHECKSUM "Rivilla ei tarkistesummaa, Viimeisin rivi: "

									#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Ei rivinumeroa tarkistesumman kanssa, Viimeisin rivi: "

									#define MSG_FILE_PRINTED "Tiedoston tulostus valmis"

									#define MSG_BEGIN_FILE_LIST "Tiedostolistauksen alku"

									#define MSG_END_FILE_LIST "Tiedostolistauksen loppu"

									#define MSG_M104_INVALID_EXTRUDER "M104 Virheellinen suutin "

									#define MSG_M105_INVALID_EXTRUDER "M105 Virheellinen suutin "

									#define MSG_M218_INVALID_EXTRUDER "M218 Virheellinen suutin "

									#define MSG_ERR_NO_THERMISTORS "Ei termistoreja - ei lampotiloja"

									#define MSG_M109_INVALID_EXTRUDER "M109 Virheellinen suutin "

									#define MSG_HEATING "Lammitan..."

									#define MSG_HEATING_COMPLETE "Lammitys valmis."

									#define MSG_BED_HEATING "Alusta lampiaa."

									#define MSG_BED_DONE "Alusta valmis."

									#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"

									#define MSG_COUNT_X " Laskuri X: "

									#define MSG_ERR_KILLED "Tulostin pysaytetty. kill():ia kutsuttu!"

									#define MSG_ERR_STOPPED "Tulostin pysaytetty virheiden vuoksi. Korjaa virheet ja kayta M999 kaynnistaaksesi uudelleen. (Lampotila nollattiin. Aseta lampotila sen jalkeen kun jatkat.)"

									#define MSG_RESEND "Uudelleenlahetys: "

									#define MSG_UNKNOWN_COMMAND "Tuntematon komento: \""

									#define MSG_ACTIVE_EXTRUDER "Aktiivinen suutin: "

									#define MSG_INVALID_EXTRUDER "Virheellinen suutin"

									#define MSG_X_MIN "x_min: "

									#define MSG_X_MAX "x_max: "

									#define MSG_Y_MIN "y_min: "

									#define MSG_Y_MAX "y_max: "

									#define MSG_Z_MIN "z_min: "

									#define MSG_Z_MAX "z_max: "

									#define MSG_M119_REPORT "Rajakytkimien tilaraportti"

									#define MSG_ENDSTOP_HIT "AKTIIVISENA"

									#define MSG_ENDSTOP_OPEN "avoinna"

									#define MSG_HOTEND_OFFSET "Hotend offsets:"


									#define MSG_SD_CANT_OPEN_SUBDIR "Alihakemistoa ei voitu avata"

									#define MSG_SD_INIT_FAIL "SD alustus epaonnistui"

									#define MSG_SD_VOL_INIT_FAIL "volume.init epaonnistui"

									#define MSG_SD_OPENROOT_FAIL "openRoot epaonnistui"

									#define MSG_SD_CARD_OK "SD kortti ok"

									#define MSG_SD_WORKDIR_FAIL "workDir open epaonnistui"

									#define MSG_SD_OPEN_FILE_FAIL "avaus epaonnistui, Tiedosto: "

									#define MSG_SD_FILE_OPENED "Tiedosto avattu: "

									#define MSG_SD_SIZE " Koko: "

									#define MSG_SD_FILE_SELECTED "Tiedosto valittu"

									#define MSG_SD_WRITE_TO_FILE "Kirjoitetaan tiedostoon: "

									#define MSG_SD_PRINTING_BYTE "SD tulostus byte "

									#define MSG_SD_NOT_PRINTING "Ei SD tulostus"

									#define MSG_SD_ERR_WRITE_TO_FILE "virhe kirjoitettaessa tiedostoon"

									#define MSG_SD_CANT_ENTER_SUBDIR "Alihakemistoon ei voitu siirtya: "


									#define MSG_STEPPER_TOO_HIGH "Askellustaajuus liian suuri: "

									#define MSG_ENDSTOPS_HIT "paatyrajat aktivoitu: "

									#define MSG_ERR_COLD_EXTRUDE_STOP " kylmana pursotus estetty"

									#define MSG_ERR_LONG_EXTRUDE_STOP " liian pitka pursotus estetty"


								#endif

								#endif // ifndef LANGUAGE_H